I bought the Anker charger/2 batteries set in this thread awhile back - http://forum.xda-developers.com/showthread.php?t=1632718
Had not used them before, but hurricane Sandy is coming through so I figured I would test them out. I put one in the charger last night and put it in the phone this morning, and now the phone will not boot up all the way - it shows the Samsung bootscreen, then the KingKangers logo screen, and then shuts off. I've had this same issue with both of the new batteries along with my original Samsung battery.
I have tried to put it into recovery and download mode, at one point it showed the download mode screen and then shut off again. Recovery mode has not worked at all. Tried holding power for 30 seconds while both plugged in and not plugged in, no luck. Saw a recommendation to take out SIM, SD card, and battery for 10 mins and then put them back, and that didn't work as well. Tried to see if ODIN would "wake it up", but ODIN does not recognize it (tried two cables from two different computers). Computer also doesn't recognize my phone to look at my files, etc.
Also, when I plug it in to charge with the battery in place, it does small vibrations - I have noticed this is the same thing the phone does if I plug it in to charge it without a battery in...worried this may mean my phone is not recognizing the battery for some reason??
Any ideas? Any help is MUCH appreciated...
FWIW, running AOKP and Dagr8's KingKangers kernel, been running it for the last week or so with no real issues other than occasional reboot.
Related
I've had this phone for 2 months.
I started up dead space, had wifi on and it was downloading the game data.
left the room to clean the kitchen (maybe 20 mins) when I came back the phone wouldn't unlock
pulled the battery and turned it on, phone booted but wouldn't get past the initial samsung logo.
after that it wouldn't turn on at all
I pulled the battery, left it for a few mins, put it back in, tried booting up, tried getting to recovery, download mode, tried removing sim and sd card
is this an issue other people have had? am i screwed? i left it plugged in w/ the battery in on the off chance it didnt have enough charge or something. but the battery logo isn't coming up
Try charging phone for an hour or so.
Question: when you connect your phone to the pc, any reaction on the pc side? Is Odin recognizing the phone?
If you can't get into download mode by holding down home+volume down+ power at the same time, you can buy a usb jig (or make it your self it's not that hard)
Just google for usb jig.
Other than that. I have no idea.
Good luck to you dude.
Sent from SGS II Running CriskeloRom V34.
no reaction anywhere. the battery animation isn't displayed when plugging in either.
can't get into download mode to use odin. i ordered a usb jig (figured it would be good to have it anyways)
the phone is currently plugged in, the battery feels slightly warm but it still wont turn on. i'm hoping it is a faulty battery.
my plan is to go to a phone shop tomorrow and ask to borrow a battery just to see if it will turn on, if not ill try a repair shop. if not that, then i'll start complaining about my warranty to the international seller i got it from on amazon.
Sorry to hear that.
Good luck.
hi if u have a tester test the voltage on the battery -/+ for dc voltage if it's zero u need to shock the battery.
i brought it in to bell and asked to use a spare battery. the girl took it right out of her phone and put it in mine, tried to turn it on, nothing. no download, no recovery, no reaction whatsoever except for a slight warming around where the camera lens is if you hold the power button for a long time.
looks like it's fried. i really hope I can get a return with the amazon seller. i've only had it 2 1/2 months
Last night I was using my phone and turned it on sleep due to having <10% battery life left. I tried turning it back on am hour and a half later and it didn't so assumed it drained, so I threw it in the charger but the battery didn't turn on. I left it in the charger over night. I woke up and tried turning it on but it still didn't budge. I tried letting it charge through both my macbook, my chromebook, several different cables and outlets, all for around 10 minutes each. My phone still won't turn on.. Nothing happens when I try to boot into CWM (volume rocker and power button hold method) I now think it may be bricked and I need to get it back to a working condition soon...
My phone is the AT&T SGSII (i777) running MIUI 2.3.7 1.12.30 (newest version) under the Siyah 2.6.3 (also newest version)
Is there any way I can fix this?? I saw somethings about these 'jigs' but is there a way fix it without using a jig and only using a computer? Can someone tell me what could possibly be wrong?? Please help me!!
*PS my macbook can dualboot into windows 7, otherwise my phone wouldn't be rooted
Hmm, LPM might be broken in MIUI.
Try this, I saw one person indicate that it worked:
Enter download mode by holding VolUp + VolDn when inserting a USB cable from a PC.
DO NOT try to flash anything - just let it sit there for 5-10 minutes!
After that, hold Power for 10-15 seconds until the device resets.
Again, DO NOT try to flash anything!
The other option is to find a standalone charger.
And next time - if it's at 10%, put it on a charger!
Battery Charging
ChuckaDucky said:
Last night I was using my phone and turned it on sleep due to having <10% battery life left. I tried turning it back on am hour and a half later and it didn't so assumed it drained, so I threw it in the charger but the battery didn't turn on. I left it in the charger over night. I woke up and tried turning it on but it still didn't budge. I tried letting it charge through both my macbook, my chromebook, several different cables and outlets, all for around 10 minutes each. My phone still won't turn on.. Nothing happens when I try to boot into CWM (volume rocker and power button hold method) I now think it may be bricked and I need to get it back to a working condition soon...
My phone is the AT&T SGSII (i777) running MIUI 2.3.7 1.12.30 (newest version) under the Siyah 2.6.3 (also newest version)
Is there any way I can fix this?? I saw somethings about these 'jigs' but is there a way fix it without using a jig and only using a computer? Can someone tell me what could possibly be wrong?? Please help me!!
*PS my macbook can dualboot into windows 7, otherwise my phone wouldn't be rooted
Click to expand...
Click to collapse
All the SGS2 i777 phones come with a plugin wall charger, why not give that a try.......
If you cannot find the charger, you can buy one for less than 3 bucks including shipping on Amazon.com
http://www.amazon.com/Samsung-Trave...=wireless&ie=UTF8&qid=1325629174&sr=1-1-fkmr0
Good Luck!
Something similar happened to me, where the battery drained so much that the phone wouldn't charge. When I plugged it into a computer/outlet, it just power cycled because as soon as you plug it in, the screen turns on (pretty stupid actually) and full brightness shows your battery "charging". Due to the phone not being able to directly pull power from the outlet (from what I can understand, if I plug in a charger and take the battery out, the phone shuts off) it can't charge fast enough, due to the screen and soft keys taking up the charge. I may be wrong, but this is what I think is happening.
Only way I could solve this was to plug the battery into my spare battery charger which came with my two spare batteries.
The thing is I can't put it into download mode or even recovery. Whenever I hold the volume buttons together when I plug it into my computer to access download mode, nothing happens and the screen remains blank and off. When I try doing the same thing and also hold the power button also to access Recovery mode, nothing happens, and the screen still is off. Every once in awhile when I try turning on the phone (which is plugged into an outlet) the 'battery charging' screen pops up for a split second and turns off. I have plugged it into Several different wall chargers (all that are Micro USB including the one the phone came with) along with several different Micro USB to USB cables to try to charge in the computer. It's definitely not the chargers nor the cables because they work with other devices. I think my phone is bricked... DX
why don't you buy another battery and see if that works if it doesn't just bring back the battery.....good luck
ChuckaDucky said:
The thing is I can't put it into download mode or even recovery. Whenever I hold the volume buttons together when I plug it into my computer to access download mode, nothing happens and the screen remains blank and off. When I try doing the same thing and also hold the power button also to access Recovery mode, nothing happens, and the screen still is off. Every once in awhile when I try turning on the phone (which is plugged into an outlet) the 'battery charging' screen pops up for a split second and turns off. I have plugged it into Several different wall chargers (all that are Micro USB including the one the phone came with) along with several different Micro USB to USB cables to try to charge in the computer. It's definitely not the chargers nor the cables because they work with other devices. I think my phone is bricked... DX
Click to expand...
Click to collapse
If the screen EVER turns on it's not bricked.
I suggest leaving it plugged in to a factory wall charger (not USB) overnight.
Worst case you may need a standalone charger to put some "juice" into the battery. I know Staples sells a universal one made by Lenmar, but it's really overpriced ($50!!!!)
I use this and i love it. It comes with an extra samsung battery too.
http://www.amazon.com/Samsung--CGPK..._1_1?s=wireless&ie=UTF8&qid=1325639756&sr=1-1
If anything, head to an AT&T store and pop the battery out of their test phone and put it into yours. See what happens, sounds like there's an issue with the charger or battery.
Entropy512 said:
Hmm, LPM might be broken in MIUI.
Try this, I saw one person indicate that it worked:
Enter download mode by holding VolUp + VolDn when inserting a USB cable from a PC.
DO NOT try to flash anything - just let it sit there for 5-10 minutes!
After that, hold Power for 10-15 seconds until the device resets.
Again, DO NOT try to flash anything!
The other option is to find a standalone charger.
And next time - if it's at 10%, put it on a charger!
Click to expand...
Click to collapse
Yup ran into that issue a couple months ago and just put it into download mode to charge. easy fix
Edit. I used a jig though.
Sent from my SAMSUNG-SGH-I777 using xda premium
Thanks for all the help! I ended up going to the at&t store and they told me the battery was defective. The guy was super nice and even though he saw my phone was rooted and had a custom rom he just told me that I probably should unroot only for the warranty but gave me a new battery for free anyway and was very nice about it. I also bought a jig just incase anything goes wrong again. But seriously, thanks to all of you!!
I woke up today, but my Vibrant didn't. No lights, no noises, only sign of life is that it gets warm while it's plugged to the charger.
I haven't tried downloading anything to it. It was acting perfectly normal yesterday. No water damage whatsoever.
Tried several tricks seen here: button combos, usb connection (my comp. doesn't recognize the dead device, though), and I tried a homemade 300k ohm jig.
Did my phone die in the middle of the night? Thanks
Your battery may have given up the ghost. Maybe a friend has a Vibrant you can swap batteries with for a couple minutes to test with?
I tried a backup new battery I had. Still heats up when plugged in to charge, that's all though.
Was the phone really hot when you woke up initially?
I made the mistake of pulling my battery during an Odin flash and thought my phone was done for. It would not power on, charge, etc. just a blank black screen with no lights.
I tried a few times and eventually I was able to get it into download mode by pulling the battery, pressing both up + down on the volume rocker and the power button with one hand, then plugged in the USB port while replacing the battery. It might take a few tries, but it may work for you. I hope that helps.
A few days ago my phone got soaked through my pants as I was working in the rain. I came home, dried it out, etc. and tried to turn it on. Wouldn't turn on, so I started charging it. I eventually got it to turn on and it seemed to be working fine except for some reason it said the battery life was at 0 %. Note that it was still working normally otherwise.
I went into recovery, made a backup, and did a factory reset to see if that would fix the problem. It didn't, so I restored the backup. Now the phone won't turn on at all.
When plugged in, it shows the charging battery symbol, and if you hold power to turn the phone on it will sometimes begin to start, but it gets to the boot animation and simply stays there forever (I've left it at the boot animation for several hours to no effect). If I try to boot into recovery it simply does not work; it will either just restart the battery charging animation or boot normally (and then get stuck on the boot animation).
In a last ditch effort, I was going to try to flash a stock ROM from Heimdall. However, I plugged my phone in and tried to enter download mode and was greeted with the error: "LOW BATTERY!! CAN'T DOWNLOAD!!." This was after charging the phone all night. I then proceeded to charge the phone for another hour then try again, to the same error. And now here I am. It seems the problem is that my phone will charge, and the battery will be full but for some reason the phone doesn't recognize that the battery has a charge, so it just thinks it's at 0%. I've tried a different battery and was unsuccessful. Is there any way that I can either force my phone to enter download mode or somehow get it to recognize the charge on the battery? Or is there some other way I could resolve this? Or is my phone simply gone for good?
I am (was) running a rooted I777 with Slim Bean ROM ( I believe v8) 4.2.
Have you tried using a JIG it can be an option
If a JIG doesn't work you can try removing the battery, then plug the phone to the PC and go to download.
But for me the problem is with the battery. If after flashing the ROM you get the same results, don't think it and BUY A NEW BATTERY.
Good luck.
Sent from my Nexus 7 2012.
If I'm bad at English is because I'm from Argentina and I'm learning.
I has the same problema, I spend two days searching on the web, but i didnt have any idea.., ,y problem is. when we conect to ANY charger (car/wall/PC-USB..) appears on screen a batery logo, but the batery never charged..., I tried to enter to the CW but, the keys combination doesnt make anything on the phone, and without live on it, I cant access to CW..., I wait for 2 hrs, with these cell phone conected to charger to see if the it gone works...
ANYONE has another idea for how we resolve these issue? My phone has a stable version of CyanogenMod..
same with me but what i did was put a different battery in, let it charge for a bit then put the original one in and it only started charging after i used my car charger as i was driving to work so thats how i fixed mine.
Hey guys,
unfortunately my 3-year old Razr died the other day. Battery has been an issue for the past few months where I had the battery completely drained 2 times but always got the device back to work. This time it's different though.
I shut down the Phone at aprox. 20% Battery to safe it from low charge. I have NEVER flashed a custom rom, the phone is purely stock. The phone wouldn't turn on the next time i tried. Initially , I had zero reaction. Then, I got at least the white LED when charging with the original adapter. Let it charge a few days. The white light would turn off after a few hours but the phone is still dead.
I replaced the battery with another (new) EB20 but still nothing. I bought a wall charger (1A) and still nothing. I even tried direct charging the battery for a few hours and still no effect. Also, every combination of Power+Volume buttons didnt work.
So i bought a factory cable but still didnt get any reaction. When hooked up to a computer via USB i have a "connecting" and "disconnecting" sound. Once the device was detected as OMAP 3340 but couldnt install it. The problem is that I dont even get the phone into fastboot mode.
On my research, I found these posts:
http://forum.xda-developers.com/showthread.php?t=2055839
http://forum.xda-developers.com/showthread.php?t=2047750
I think this will be my last try and option, but i have no experience whatsoever with flashing and I find the description very hard to understand and follow. Is there maybe someone who can explain step by step what there is to install/do and in what order? This would be awesome.
Greets,
razore