i tried to flashing wp7 rom to my toshiba tsunagi..
when the time the software requiment install .net 3.5...
so i downlond and install...but the cable still connecting to my toshiba tsunagi...
after install i tried turn on my TG01 ,the led is red colour and lighting when i hold the power button...
any one can solve it?
Sorry for my poor english...
Hello,
It's look like your battery is flat. Try to charge it with a universal charger or another phone
pitoxman said:
Hello,
It's look like your battery is flat. Try to charge it with a universal charger or another phone
Click to expand...
Click to collapse
Thanks for reply ,do you mean another phone charger?
i tried that,it just auto reboot and show wp7bootloader...and then reboot again:crying:
some one help me?is it working if i change battery?
You can either directly charge the battery, by cutting open a usb cable.
-OR-
I find that you have to play with the charger and power buttons a bit. Plug it in, out, in out, and turn it off, on, until it starts charging with out a boot loop.
frankdrey said:
You can either directly charge the battery, by cutting open a usb cable.
-OR-
I find that you have to play with the charger and power buttons a bit. Plug it in, out, in out, and turn it off, on, until it starts charging with out a boot loop.
Click to expand...
Click to collapse
thanks for your reply,sir.
if cutting open a usb cable ,how can i do tat?:crying:
because my battery was flat,when i plug it in to my charger my phone just auto reboot after showing wp7 loader,so i can't know when it is starts charging :crying
Please reply me ,i need your help sir
sorry for my poor english
max2089 said:
thanks for your reply,sir.
if cutting open a usb cable ,how can i do tat?:crying:
because my battery was flat,when i plug it in to my charger my phone just auto reboot after showing wp7 loader,so i can't know when it is starts charging :crying
Please reply me ,i need your help sir
sorry for my poor english
Click to expand...
Click to collapse
Well, cutting open a usb cable should be the last thing you try :/
Try the following:
1. Plug in charger.
2. Pull battery once you see the bootloader.
3. If it boots, put the battery back in.
Or just plug in the charger and leave it for a while. It might go into charge mode eventually, or it might boot and charge eventually. The bootloader is just buggy like that.
Sent from my HTC Dream using xda app-developers app
frankdrey said:
Well, cutting open a usb cable should be the last thing you try :/
Try the following:
1. Plug in charger.
2. Pull battery once you see the bootloader.
3. If it boots, put the battery back in.
Or just plug in the charger and leave it for a while. It might go into charge mode eventually, or it might boot and charge eventually. The bootloader is just buggy like that.
Sent from my HTC Dream using xda app-developers app
Click to expand...
Click to collapse
Thank you So much,sir...i will try it when i at home...
is it the worst changing battary?thank for your reply,it helps me alot:good:
max2089 said:
Thank you So much,sir...i will try it when i at home...
is it the worst changing battary?thank for your reply,it helps me alot:good:
Click to expand...
Click to collapse
Well the problem is that the battery is low and it can't charge when the phone is off. So you need to either charge it or get a new battery that's fully charged.
Sent from my HTC Dream using xda app-developers app
frankdrey said:
Well the problem is that the battery is low and it can't charge when the phone is off. So you need to either charge it or get a new battery that's fully charged.
Sent from my HTC Dream using xda app-developers app
Click to expand...
Click to collapse
:laugh:Hey Brother,I have already fix my phone.It is really battery problem,i used a USB cable to charge the battery directly.:laugh:and now my phone is WP7.8 :victory:
Screen shot pls.
E=max2089;39314172]:laugh:Hey Brother,I have already fix my phone.It is really battery problem,i used a USB cable to charge the battery directly.:laugh:and now my phone is WP7.8 :victory:[/QUOTE]
Svree
Related
I need help with this NOW if anyone can. I figured I'd go ahead and make a thread for it so it would get seen. I was trying to update to 2.1 and something went wrong. Long story short the battery drained and now even when it's plugged into the wall all it does is flash its little red light. If I can get it to charge I think I can get things working again but as it stands I don't even know if it is charging. If I have it plugged into the wall and remove the battery the led turns green. If I put the batt back in afterwards it will go off after a bit and eventually "turn on" (in this case that just means that the screen comes on but is completely black but backlit) but there is no led indication at all so i don't know if it's charging or what. It doesn't seem to be. I really need help asap. Thanks in advance.
Silly question perhaps.. have you tried putting it into flash mode for SEUS (phone off hold back key, plug in USB cable)...?? does it register the phone?
Open pc companion hold back button and insert the micro Ian until it says stop it should then tell you your software is already the latest but if there's a problem you can use the repair option. Hth
Sent from my X10i using XDA App
Not the micro Ian but the micro ish. Damn sausage fingers!
Sent from my X10i using XDA App
Dear god how hard is it to write micro USB !!!
Sent from my X10i using XDA App
im_iceman said:
Silly question perhaps.. have you tried putting it into flash mode for SEUS (phone off hold back key, plug in USB cable)...?? does it register the phone?
Click to expand...
Click to collapse
Tried it just now, nothing.
My suggestion would be to plug it in for a few hours then try again. Or take battery out completely and try the back button without a battery. Might work. Might not. Sorry. Doubt the phone is bricked tho.
Sent from my X10i using XDA App
adamwilliams said:
My suggestion would be to plug it in for a few hours then try again. Or take battery out completely and try the back button without a battery. Might work. Might not. Sorry. Doubt the phone is bricked tho.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I tried without the battery and it didn't work. I'll leave it plugged up for a while but if it doesn't charge i don't know what i'm going to do.
spacegravity4me said:
I need help with this NOW if anyone can. I figured I'd go ahead and make a thread for it so it would get seen. I was trying to update to 2.1 and something went wrong. Long story short the battery drained and now even when it's plugged into the wall all it does is flash its little red light. If I can get it to charge I think I can get things working again but as it stands I don't even know if it is charging. If I have it plugged into the wall and remove the battery the led turns green. If I put the batt back in afterwards it will go off after a bit and eventually "turn on" (in this case that just means that the screen comes on but is completely black but backlit) but there is no led indication at all so i don't know if it's charging or what. It doesn't seem to be. I really need help asap. Thanks in advance.
Click to expand...
Click to collapse
Just out of interest how long have you left it on the charge for? Because the red light flashes while charging until 10% and I remember once when my battery fully drained it did that for a few minutes until phone turned on again. Leave it for a while if you haven't done so.
The reason I ask is, incase you saw red light flashing and took it off charge straight away thinking its faulty? Like I said it sometimes takes a while to turn on fully when battery has died.
Edit: I know this is unhelpful, but that's why when you update via SEUS it says to ensure battery has 50%
Sent from my X10i using XDA App
I got he same problem 3 weeks ago. i could not get the phone to boot anymore even after trying all the unbrick method available here. so i sent it to sony ericsson service and they changed the motherboard.
okay, been charging for a while now and still have the red light. Pretty confident it isn't charging.
Plz try another usb cablr. I know about 20 people whoms usb cable accidently died and the phones cannot charge anymore ....
Regards
Sent from my X10i using Tapatalk
Bin4ry said:
Plz try another usb cablr. I know about 20 people whoms usb cable accidently died and the phones cannot charge anymore ....
Regards
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
+1 - this happened to my wifes vivaz and my x10. changed cable and started charging again.
mrtim123 said:
+1 - this happened to my wifes vivaz and my x10. changed cable and started charging again.
Click to expand...
Click to collapse
But the phone won't even boot. Will the battery charge while it's off? or when it's on a black screen? I know 2.1 lets it charge when it's off now, but the OP said the update screwed up.
Other suggestions that may take some time:
1. Find someone else who has an X10 and charge it in their phone.
2. Bring it to your phone provider and ask them to charge it.
3. Bring it to your phone provider and exchange the battery (temporarily?).
4. Buy an external wall charger (one that lets you charge the battery directly, not in the phone).
I ended up bypassing the phone and charging the battery directly via a macgyvered usb cable. Don't ask. lol. But I got it charged enough to use the se update tool and restore it back to the original rom. I'll try the update to 2.1 later after I get this thing charged all the way up. Thanks guys.
Hello...I just unlocked my bootloader and tried to CWM 2.3.4 using the new version of CWM by tenfar...I am stuck on the Motorola boot screen and my battery is too low to flash...I tried to pull the battery and put the phone on an ac charge but that did not work...any assistance is greatly appreciated
Hi,
Easiest solution is to get a universal charger from Radio Shack, $10.
Cheers!
Remove battery, put the phone in AC mode, then place battery in. It takes about 3-5 hrs to charge, then it should be okie. I met this problem too Solved that way!
Sent from my MB860 using XDA App
If the green led is not on is it still charging
dre198703 said:
If the green led is not on is it still charging
Click to expand...
Click to collapse
It still charge. Dont worry! In situation like this, calm is the most important scarry but exciting ...?!
Sent from my MB860 using XDA App
it still isnt charging
wuocfan said:
Remove battery, put the phone in AC mode, then place battery in. It takes about 3-5 hrs to charge, then it should be okie. I met this problem too Solved that way!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
How do you put the phone into AC mode?
hi I am having this problem as well. did you ever find a solution?
jimjenkins said:
hi I am having this problem as well. did you ever find a solution?
Click to expand...
Click to collapse
. First off nice job digging up this dead corpse. Of course he found a solution. Know what it is? Dont use Tenfars recovery anymore because its completely outdated and will cause problems. As far as being able to charge yer phone are u trying to plug it in to a computer? Because if battery dies it wont work to plug it in to the comp.
Sent from my MB860 using Tapatalk
No solutions on here yet?
Well, this is what I did, not sure if it will completely work yet, but so far it's doing it's thing.
- I plugged the phone into the charger adapter
- Booted the phone without holding volume down
- let the phone charge itself
- monitor battery level with volume buttons
Once that was done I could continue, as phone does not charge during flashing.
Or am I way off here?
My X10 suddenly cannot turn on, press the power button, only flashing the red led 3 times(battery is full), the screen display nothing, press any button has no response, I do not know what the problem, please help...
Sounds like the battery is flat, maybe a problem with the charger or usb plug is not charging the battery? Does the light go on when you plug the charger in? Does it go green, if not then it would indicate a battery /charger problem
Sent from my X10i using XDA App
omnikam said:
Sounds like the battery is flat, maybe a problem with the charger or usb plug is not charging the battery? Does the light go on when you plug the charger in? Does it go green, if not then it would indicate a battery /charger problem
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I've tried some difference charger, no green/red light show on.
Mmm this is what happened to mine when you try to flash it on pc does get to about 90 percent then disconnect
Sent from my X10i using XDA Premium App
geordie 34 said:
Mmm this is what happened to mine when you try to flash it on pc does get to about 90 percent then disconnect
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
I faced the same issue.
My phone's problem was that when I upgraded to a new ROM, I didnt wiped the battery stats.
And phone was not turning on as the battery was flat and it was not charging also.
This is what I did.
Opened flash tool.
Removed the battery.
Pressed back button of phone and connected USB to phone and PC.
Inserted the battery.
Now I see the green LED means phone is in flash mode.
I kept phone like that for almost 10 mins ! (battery will actually charge a little when we do so)
Later I disconnected and switched on phone and it worked !
The first thing I did was rebooting into recoevry and wiping battery stats.
And the actuall battery was less than 10 % !
You can have a try this way and see if it can be fixed.
Good luck !
I did the same as Runaway Bunny. It worked perfectly after that. Just be sure to wipe the battery stats and FULLY charge your phone immediately.
EDIT
I ALSO had an issue with the USB port going bad so you may watch for that as well if the above does not work.
And let us know how you made out.
Thats very bad i kept my phone 5-6 hours on charge and it turned on this happened to me 3 times in a day
EDIT:My battery got to 5-0% in 2 secs and it turned off at that time it was my brand new phone...
runaway_bunny said:
I faced the same issue.
My phone's problem was that when I upgraded to a new ROM, I didnt wiped the battery stats.
And phone was not turning on as the battery was flat and it was not charging also.
This is what I did.
Opened flash tool.
Removed the battery.
Pressed back button of phone and connected USB to phone and PC.
Inserted the battery.
Now I see the green LED means phone is in flash mode.
I kept phone like that for almost 10 mins ! (battery will actually charge a little when we do so)
Later I disconnected and switched on phone and it worked !
The first thing I did was rebooting into recoevry and wiping battery stats.
And the actuall battery was less than 10 % !
You can have a try this way and see if it can be fixed.
Good luck !
Click to expand...
Click to collapse
I've been followed the step, but it show red LED (flash slowly) not green LED.
seems not the same problem, thanks!
What you see in LogCat when you use USB while switching on ?
I guess, now you can start ADB while switching on and wipe stats through command prompt, hope it helps.
I also had the same problem but fixed it as "Bunny" mentioned (Cute name though)
mitalbr said:
What you see in LogCat when you use USB while switching on ?
I guess, now you can start ADB while switching on and wipe stats through command prompt, hope it helps.
I also had the same problem but fixed it as "Bunny" mentioned (Cute name though)
Click to expand...
Click to collapse
Would you mind showing me the steps?
thanks very much!
I know this is a late addition, but if all else failed then it very well might be the usb cord, i had to replace mine as it stopped working. I picked up 2 on ebay for $4 which included postage and 2 replacement batteries set me back $10 delivered
Sent from my X10 using XDA Premium App
omnikam said:
I know this is a late addition, but if all else failed then it very well might be the usb cord, i had to replace mine as it stopped working. I picked up 2 on ebay for $4 which included postage and 2 replacement batteries set me back $10 delivered
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Yeah it really sounds like ur battery is not charging. Happened to me a while ago had to send back to se for repair (USB connection on phone broke)
Sent from my X10i using XDA App
So today, I am trying to wake my x10 again one more time and I try to plug my old x10 to the wall plug and it's not even charging at all. No red blink. Then, I try to plug to my PC and the red blink turn on, taking forever to charge. I did charge this morning before I leave to school and when I came home, it's still doing the same thing again. I don't know how I can fix or turn it back on like I did before. Please help and the charging problem too.
i2nice said:
So today, I am trying to wake my x10 again one more time and I try to plug my old x10 to the wall plug and it's not even charging at all. No red blink. Then, I try to plug to my PC and the red blink turn on, taking forever to charge. I did charge this morning before I leave to school and when I came home, it's still doing the same thing again. I don't know how I can fix or turn it back on like I did before. Please help and the charging problem too.
Click to expand...
Click to collapse
Did you try to wipe battery stats in order for the phone to refresh the battery percentage again? Did you try a different wall plug?
mgsstar said:
Did you try to wipe battery stats in order for the phone to refresh the battery percentage again? Did you try a different wall plug?
Click to expand...
Click to collapse
Yes, I did try the different wall plug. Also, I can't turn it back to recovery to wipe the battery stats because it start to take very long time to charge.
Sent from my SGH-I747 using xda app-developers app
Hi sir, do you have time? I cant figure out what is wrong with my x10. When i try to flash those Generic Stock Rom, i get to have errors flashing. It aborts sometime when flashing system.sin and other sin depending on the tft file... i dunno what version my phone is but my pc detects it with flashmode. When im using Seus, it fails flashing in about 90% of the process... when booting my phone, just a quick vibrate with green flashes once. Do u have skype account? Hope u have time and can help me. Most of the links in xda our outdated. And i know my phone is outdated too. Thanks and more power
please help my moto g power just went into a bootloop with crDroidAndroid-11.0-20211014-sofiar-v7.11 latest running rom .
Now it wont turn on but when I plug in charger the led just blinks and nothing happens.
please help
Did it happen right after the firmware installation?
Is the battery good?
I think the battery is going bad
darko454 said:
I think the battery is going bad
Click to expand...
Click to collapse
It needs a fair amount of current during boot up, a charger may not supply enough.
Batteries last 1-3 years. I just look at replacing them as part of normal maintenance.
Get it out of there before it fails... any swelling is an Li failure which can cause severe damage.
hey thanks for the info
I tried to start from stock using Rescue tool from motorola
everything went normal but now i tried to boot up and nothing happens even with the charger plug in
any help thanks
I forgot to mention if I leave it alone for a while sometimes it turn on but won't go passed Motorola
Any ideas what to do?
Thanks
darko454 said:
Any ideas what to do?
Thanks
Click to expand...
Click to collapse
Try replacing the battery, then go from there.
It may be a dead end but you need to eliminate it as the cause. You could also check it's voltage after a failed boot to get an idea of it's condition.
Fully charge it first... and don't short it out while measuring it. Measure before and right after boot attempt with no charger.
4.3 volts is about 100%
3.9 volts is about 70%
3.5 volts is about 20%
Since it's a no load reading at 100% it should be near 4.3 volts. After the attempt if it drops below 4 volts it's likely toast.
Thanks
But isn't the display supposed to turn on when I plug in the charger
Not even the display shows anything..
darko454 said:
Thanks
But isn't the display supposed to turn on when I plug in the charger
Not even the display shows anything..
Click to expand...
Click to collapse
Probably time to have it examined. May be a loose connector, a C-port or a mobo failure.
Or may be from a bad flash...
blackhawk said:
Probably time to have it examined. May be a loose connector, a C-port or a mobo failure.
Or may be from a bad flash...
Click to expand...
Click to collapse
What should I do
I have already checked all connections and I have already replaced USB port before
Thanks
blackhawk said:
Try replacing the battery, then go from there.
It may be a dead end but you need to eliminate it as the cause. You could also check it's voltage after a failed boot to get an idea of it's condition.
Fully charge it first... and don't short it out while measuring it. Measure before and right after boot attempt with no charger.
4.3 volts is about 100%
3.9 volts is about 70%
3.5 volts is about 20%
Since it's a no load reading at 100% it should be near 4.3 volts. After the attempt if it drops below 4 volts it's likely toast.
Click to expand...
Click to collapse
I think I found out the battery is bad
I disconnected the battery and plugged in charger. The led blinks and tries to boot up
When I connected the battery and then plugged in charger nothing happens not even the led blinks
darko454 said:
I think I found out the battery is bad
I disconnected the battery and plugged in charger. The led blinks and tries to boot up
When I connected the battery and then plugged in charger nothing happens not even the led blinks
Click to expand...
Click to collapse
You'll know for sure when you get a new battery...
blackhawk said:
You'll know for sure when you get a new battery...
Click to expand...
Click to collapse
ok just installed new battery... did a RSA
booted up
randomly shut down
wont turn on
please help
darko454 said:
ok just installed new battery... did a RSA
booted up
randomly shut down
wont turn on
please help
Click to expand...
Click to collapse
Will the boot menu come up?
Charge the battery to at least 70% before you use it... right?
blackhawk said:
Will the boot menu come up?
Charge the battery to at least 70% before you use it... rig
Click to expand...
Click to collapse
yes i left it charging for about 5 hours
i booted bootloader but now it doesnt boot not even bootloader
darko454 said:
yes i left it charging for about 5 hours
i booted bootloader but now it doesnt boot not even bootloader
Click to expand...
Click to collapse
could it be a defective battery?
darko454 said:
could it be a defective battery?
Click to expand...
Click to collapse
Try a hard reboot. Disconnect/reconnect the battery if needed. Inspect it's contacts if you do and all other ribbon cable connections... make sure nothing slipped by.
Is the charge port pcb good?
Pull SD and sim cards if present.
darko454 said:
I think I found out the battery is bad
I disconnected the battery and plugged in charger. The led blinks and tries to boot up
When I connected the battery and then plugged in charger nothing happens not even the led blink
Click to expand...
Click to collapse
I redid everything
same results as before except for the fist boot when i installed new battery
something i noticed when in fastboot mode when i have it connected to charger with no battery connected where it says :
TRANFER mode: usb connected
but it shuts off i believe because the battery is not connected
darko454 said:
I redid everything
same results as before except for the fist boot when i installed new battery
something i noticed when in fastboot mode when i have it connected to charger with no battery connected where it says :
TRANFER mode: usb connected
but it shuts off i believe because the battery is not connected
Click to expand...
Click to collapse
Not for sure it sounds like either the C port pcb or mobo is bad.
Any indication the battery is charging ie heat when on the charger?