Lost in virtual world - Galaxy S II Q&A, Help & Troubleshooting

Hello world.
I am searching here but I fail a lot. I want to upgrade my phone into 4.0.4 android becouse this one don't have my language in it (Slovenian)
What I need to do?

Go to Sammobile, register there and download the preferred firmware for your device and flash it with Odin.
Sent from my deep fried potato

boki9999 thanks I fixed the problem.One more question.. My phone must be rooted If I wanna change boot animation?

Wu187 said:
boki9999 thanks I fixed the problem.One more question.. My phone must be rooted If I wanna change boot animation?
Click to expand...
Click to collapse
Yes, your phone must be rooted.

23732 said:
Yes, your phone must be rooted.
Click to expand...
Click to collapse
Can I fail with rooting? Probably can lol
Easy to do or hard? I really don't wanna fail with this!

Wu187 said:
Can I fail with rooting? Probably can lol
Easy to do or hard? I really don't wanna fail with this!
Click to expand...
Click to collapse
Sure you can fail.
My recommendation: do your due diligence in research, and make sure whatever you are flashing is meant for your model of phone before doing anything.
#1 reason I've seen for bootloops and bricks is due to people just flashing the first thing they find, which ends up being a firmware meant for a different model of phone.

If you want an easy an almost 100% brick free way to root your phone, download siyah kernel and just flash it through the PDA section of Odin.
That will give you root + permanent CWM

I rooted phone with odin and it's ok but I think there is something wrong with GPS.(Not working)
It start working when I rebooted my phone.
Another thing..Where can I get boot animations ?
I found it (lol) Thanks for everything
Google can be really good friend!

Related

[Q]Unrooting for Dead pixel

My SGS II just got an Dead(Red/Pink) Pixel today, And i want to take it back to the shop where i bought it.
But my question was, should I Unroot my phone when i bring my phone to the shop? If so, will Rebranding my Phone lose all my contacts?
Backup all your contacts on Gmail. And yes I would unroot it, just in case they throw it in your face and say "Sorry pal, you voided your warranty."
Thanks for your fast reply!
Will all these Firmwares work? [ROM + Guide]Official i9100 KDD/KE1/KE2/KE7 download for Odin Flash and Root Guide. Because i need the Netherlands One ^^
Plexcon said:
Thanks for your fast reply!
Will all these Firmwares work? [ROM + Guide]Official i9100 KDD/KE1/KE2/KE7 download for Odin Flash and Root Guide. Because i need the Netherlands One ^^
Click to expand...
Click to collapse
Check in your inbox
Thanks for the info!
One question tough.
I just flashed my new Firmware, But i dont know how to Flash the kernel now.
Code:
KernelVersion: [email protected]
Sorry for my noobness, Im still new to Android devices
Don't forget to reset the custom binaries download counter of the device. Otherwise they'll still be able to see you've been running custom kernel/firmware.
Ok so i need to make a Jig for that. And then reset all the custom binaries?
Yes all debranding etc in dev section.
jje
Sent from my GT-I9100 using XDA Premium App
i wonder if any1 sells those zigs ..m not so good with soldering stuffs
dont try to return because one dead pixel, they might not take it back. tell them phone shuts down at random
Plexcon said:
Thanks for the info!
One question tough.
I just flashed my new Firmware, But i dont know how to Flash the kernel now.
Code:
KernelVersion: [email protected]
Sorry for my noobness, Im still new to Android devices
Click to expand...
Click to collapse
Again, stick it under PDA in odin then flash, make sure you follow screenshots in other threads about what not to tick while flashing with odin

[Q] which way to root

Hi I was just interested in which way is best to root my device and why.
I broke my last galaxy s2 doing it via odin as I was unable to unroot it.
This time I have done it the superoneclick way and unrooted via ginger unroot app.
Yes I'm a noob and someone if any one answer will have a pop about which thread I should've gone to, but looking around for the last hour has shown bugger all.
I could'nt for some reason unroot with odin and am baffled why.
Any help would be appreciated
Regards Shaun
Root using one of the many root kernels.
Unroot by flashing a stock ROM from this thread: http://forum.xda-developers.com/showthread.php?t=1075278
Easiest way just flash CF Root via Odin. Job done simples.
Yes, I'm going to have a "quick pop". Initial search of Q&A forum turned up very similar questions, this is where you should have posted instead of creating a new one?
http://forum.xda-developers.com/search.php?searchid=8243020
Answers are above, including the link with guides.
Hi I did this the first time via odin, but was unable to unroot.
I used an insecure kernal and had the original kernal but when I flashed the original kernal back it was still rooted.
So this may be a silly question but why do I need to flash a rom as some people seem to suggest?
Sorry to sound thick ( I am I guess ) but so much info has really baffled me.
I thought you downloaded an insecure kernal and flashed via odin and that was it, rooted, then if you want to unroot you flash the original kernal, use usb jig and job was done.
Or am I way off lol
Again sorry if I am that bad
Regards Shaun
If you flash back stock firmware, busybox and superuser are removed, so you won't have root access. Also stock kernel as part of the package will instal stock recovery.
Sent from my GT-I9100 using xda premium
Iamaspecialneedscase said:
So this may be a silly question but why do I need to flash a rom as some people seem to suggest?
Click to expand...
Click to collapse
The actual rooting process changes (adds) things to the system, that's why you need to flash a "clean" one to unroot.
The unsecure kernels only provide the means to perform the root, they don't do the actual root.
Kernels like CF-Root or mine (see sig) do perform the actual root on boot, but as said above, it involves adding things to the original system.
First and foremost, thank you all for your info it is much appreciated and I mean that.
But I am totally lost and still have a screwed of G2 in the drawer.
I have followed advice to the T and some how I am no better off.
I mean what has firmware and roms got to do with rooting or unrooting.
I just want to get to grips with rooting before flashing firmware or at least someone to say what I did wrong.
On my new G2 I did it via superoneclick is that wrong?
Regards Shaun
Iamaspecialneedscase said:
I mean what has firmware and roms got to do with rooting or unrooting.
Click to expand...
Click to collapse
This has been answered two times in this thread!
Read it!
Iamaspecialneedscase said:
On my new G2 I did it via superoneclick is that wrong?
Click to expand...
Click to collapse
No, I did my very first root using that one as well, perfectly fine.
Iamaspecialneedscase said:
and still have a screwed of G2 in the drawer.
Click to expand...
Click to collapse
How screwed?
What does it still do and what doesn't it? Can it maybe still go to donwload mode (VOLDOWN+HOME+POWER when off)?
it keeps coming up with force closeandroid.com and has lost its signal for 3g.
Iamaspecialneedscase said:
I mean what has firmware and roms got to do with rooting or unrooting.
I just want to get to grips with rooting before flashing firmware or at least someone to say what I did wrong.
Thats usually in most cases not following the relevant instructions .
This method works but if you cannot understand it then leave your phone unrooted and start reading the Guides and FAQS .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Basics are choose your kernel flash through Odin phone is now rooted .
Ignore the yellow triangle or just buy a USB recovery jig to remove it .
jje
Click to expand...
Click to collapse
yes still does download mode still makes calls, just could'nt unroot it and when I used gingerunroot app it unrooted it but the force close bit and bad signal started. Then I could'nt root it or bugger all
Iamaspecialneedscase said:
yes still does download mode still makes calls, just could'nt unroot it and when I used gingerunroot app it unrooted it but the force close bit and bad signal started. Then I could'nt root it or bugger all
Click to expand...
Click to collapse
Just re-flash official firmware from Intratech's thread [ROM+Guide]Official i9100 Firmwares KG, KH, KI, KJ, KK1/2/5, KL1/2/3, LA2 Download (mentioned in an earlier post).
Follow his instructions exactly, and you shouldn't go wrong
After you've further researched and read, follow the above mentioned rooting methods to the letter. Done
Iamaspecialneedscase said:
yes still does download mode still makes calls, just could'nt unroot it and when I used gingerunroot app it unrooted it but the force close bit and bad signal started. Then I could'nt root it or bugger all
Click to expand...
Click to collapse
Flash a fresh/clean ROM like suggested in this thread, that should most definitaly fix that phone and get it back to fully working state.
So just before I do this flashing the firmware, just to make sure you understand!
I do the flashing the firmware as if I was flashing the kernal?
Also I'm on 2.3.4 will it stay as that or will I have to use another firmware for that?
Again sorry if I am getting this wrong and thank you for your patience
Get a USB jig.
Flash your stock rom of choice from the intratech thread.
Flash speedmod kernel or whichever you want to gain root.
PS. You shouldn't be flashing anything if you don't know what your doing.....
Sent from my GT-I9100 using Tapatalk
Iamaspecialneedscase said:
So just before I do this flashing the firmware, just to make sure you understand!
I do the flashing the firmware as if I was flashing the kernal?
Also I'm on 2.3.4 will it stay as that or will I have to use another firmware for that?
Again sorry if I am getting this wrong and thank you for your patience
Click to expand...
Click to collapse
The intention is to get the phone in a working state, so you can just about flash any official firmware you like. Your Android version will also upgrade if you flash a newer package.
Good reports about XILA2. May have a few Italian apps on it, you may wish to keep them or uninstall later. You may have to flash a seperate CSC later, or just manually enter your APN.
Follow Intratech's instructions and go for it!

[Q] The most easiest way to root S2 4.1.2

I'm a bit a noob when it gomes to rooting phones.
Is there any tutorial how to root S2 4.1.2? The simplest and easiest way to do it and the safest?
Cheers!
check this thread...cant get any easier then this
http://forum.xda-developers.com/showthread.php?t=2050297
ExynosAbuse doesn't work in 4.1.2
Sent from the little guy
Fapmann said:
I'm a bit a noob when it gomes to rooting phones.
Is there any tutorial how to root S2 4.1.2? The simplest and easiest way to do it and the safest?
Cheers!
Click to expand...
Click to collapse
By flashing a kernel like siyah v6 b5+ via odin.
Thanks for the answers!
Now first of all, ExynosAbuse would be perfect but does that support 4.1.2?
Also what comes to sidyah, does that support phones that are sim-locked? If so, how can i get rid of the operator sim-lock and is this risky?
And for the last: if i root my phone, can i get official updates in the future from samsung? Cause i don't wanna mess with the style that i got in my jelly bean quite like it, just want to get superuser-access.
So the app that i'm searching for is one click root that supports updates in future for 4.1.2. Is it impossible?
Thanks!
I'm with theunderling here.
I've always flashed via Odin woithout any problems and it very quick too. If you do everything right, it shouldn't take more than a minute, dead serious. 1 minute. Okay maybe more, but maximum 2 according to me
Just download tar or md5 file. Open Odin. Put the file in PDA. Then start. (and make sure Re-Partition is NOT checked)
(Im not going to give you step by step instructions cause that is for you to find out But i've actually helped you out alot
Good luck, and post for further question. Just dont forget to search before.
*EDIT* Yea, siyah is one of the best kernels, and dont worry everythin should be the same. You can get siyah kernel from gokhanmoral.com
gastonw said:
ExynosAbuse doesn't work in 4.1.2
Sent from the little guy
Click to expand...
Click to collapse
sorry my bad i just saw that now .Guess i should have read before suggesting:thumbup:
there is this option which wont require a computer although i haven't tried this http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
ammar1514 said:
sorry my bad i just saw that now .Guess i should have read before suggesting:thumbup:
there is this option which wont require a computer although i haven't tried this http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
Click to expand...
Click to collapse
That's what we cal anxiety posting
Sent from the little guy
ammar1514 said:
sorry my bad i just saw that now .Guess i should have read before suggesting:thumbup:
there is this option which wont require a computer although i haven't tried this http://forum.xda-developers.com/showpost.php?p=31310884&postcount=3
Click to expand...
Click to collapse
Yeah that works too.I rooted Jb that way.

Hi guys! I'm a noob, and I have some questions

Hi guys!
First of all, I'm sorry if my english sounds wierd, not my main language.
I'm not here to ask witch rom or kernel are the best, just some help.
Recently I got an S2 - GT-I9100 with stock 4.1.2 room. I'm loving this phone, and I kinda like the samsung's rom even tough it consumes a lot of battery. I'm kinda curious about CyanogenMod and using moded kernels, but, I'm kinda afraid of messing up everything and brick my phone. Checked if I had the eemc firmware insane chip and I got it, so it makes me even more insecure of trying out new stuff.
Now for the questions:
I have this phone locked to a carrier, can I still flash it?
Can I flash it even if I have the eemc bug without any problems?
Can you guys recomend a really good newbie guide with each and every step to flash and install a new kernel? (I've looked around this website and the internet, but, those that I find kinda' dont explain everything in an easy way)
I've instaled clockworkmod on my phone, but it says it dosent suport it. why not?
Can I have a custom kernel with sammy's stock room?
thanks in advance.
1) Yes, you can flash custom firmware if your phone is carrier locked
2) Yes, you can flash your phone despite having a chip susceptible to the EMMC bug, which only affects phones running rooted stock 4.0.4 firmware
3) Do not attempt to flash anything to your phone until those guides make sense. Right now they look like they 'don't explain things in an easy way' because you obviously don't know a lot about Android, and in particular this phone. If you take the time to read/learn, the guides very quickly will become easy to understand & you'll know what you're doing. Flashing without knowing what you're doing leads to busted phones & dented wallets.
4) Without knowing exactly what you flashed, I have no idea. If you want to root your phone, there is a thread stickied near the top of Q&A that has all the info you need. It honestly doesn't get any simpler than that thread. If you don't find it easy to understand, as I said above, don't do anything to your phone until you do.
5) Yes, you can run a custom kernel with a stock rom
MistahBungle said:
1) Yes, you can flash custom firmware if your phone is carrier locked
2) Yes, you can flash your phone despite having a chip susceptible to the EMMC bug, which only affects phones running rooted stock 4.0.4 firmware
3) Do not attempt to flash anything to your phone until those guides make sense. Right now they look like they 'don't explain things in an easy way' because you obviously don't know a lot about Android, and in particular this phone. If you take the time to read/learn, the guides very quickly will become easy to understand & you'll know what you're doing. Flashing without knowing what you're doing leads to busted phones & dented wallets.
4) Without knowing exactly what you flashed, I have no idea. If you want to root your phone, there is a thread stickied near the top of Q&A that has all the info you need. It honestly doesn't get any simpler than that thread. If you don't find it easy to understand, as I said above, don't do anything to your phone until you do.
5) Yes, you can run a custom kernel with a stock rom
Click to expand...
Click to collapse
Well thanks for replying!
Yes, its better not to flash it before I fully understand what I'm doing. Would you recommend some guides that I can read, from your personal experience?
And I instaled cwm from google play. -____-"
Shadeftw said:
Hi guys!
First of all, I'm sorry if my english sounds wierd, not my main language.
I'm not here to ask witch rom or kernel are the best, just some help.
Recently I got an S2 - GT-I9100 with stock 4.1.2 room. I'm loving this phone, and I kinda like the samsung's rom even tough it consumes a lot of battery. I'm kinda curious about CyanogenMod and using moded kernels, but, I'm kinda afraid of messing up everything and brick my phone. Checked if I had the eemc firmware insane chip and I got it, so it makes me even more insecure of trying out new stuff.
Now for the questions:
I have this phone locked to a carrier, can I still flash it?
Can I flash it even if I have the eemc bug without any problems?
Can you guys recomend a really good newbie guide with each and every step to flash and install a new kernel? (I've looked around this website and the internet, but, those that I find kinda' dont explain everything in an easy way)
I've instaled clockworkmod on my phone, but it says it dosent suport it. why not?
Can I have a custom kernel with sammy's stock room?
thanks in advance.
Click to expand...
Click to collapse
If you flash Philz kernal for your software build its a safe kernal from the brick bug. If you download the zip file it will not only put the safe kernal on but also root it. Link below
http://forum.xda-developers.com/showthread.php?t=1877270
What exactly is the EMMC bug?
Sent from my GT-I9100 using XDA Premium 4 mobile app
If you're running rooted 4.0.4 stock & you do a factory reset, there's a fair chance you'll brick your phone. For the technical version, Google/XDA search is your friend.
stonedpsycho said:
If you flash Philz kernal for your software build its a safe kernal from the brick bug. If you download the zip file it will not only put the safe kernal on but also root it. Link below
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
Hi once more!
Can I ask you for some more help? I read the post about philz kernel, understood what I have to do and I want to thank you about trying to help me. I'm sorry to bother you once more, since I prefer to be certain.
Got the GT-I9100
I got stock 4.1.2
Baseband is I9100BULS1
Kernel version is 3.0.31-88955 [email protected] #3 SMP PREEMPT KST 2013
Compilation Number is JZO54K.I9100XWLSD
So I guess the one that I need to download and install is:
<< 17.04.2013 - PhilZ-cwm6 v4.93.6 with CWM 6.0.3.1 based recovery >>
XWLSD (bootloop fixed)
http://www.mediafire.com/file/4cb3mf...3.6-signed.zip
http://www.mediafire.com/file/q642zb...4.93.6.tar.md5
Also I got SuperSU already installed, this means I have to unistall it and do this or can I install this kernel anyway?
Shade
Shadeftw said:
Hi once more!
Can I ask you for some more help? I read the post about philz kernel, understood what I have to do and I want to thank you about trying to help me. I'm sorry to bother you once more, since I prefer to be certain.
Got the GT-I9100
I got stock 4.1.2
Baseband is I9100BULS1
Kernel version is 3.0.31-88955 [email protected] #3 SMP PREEMPT KST 2013
Compilation Number is JZO54K.I9100XWLSD
So I guess the one that I need to download and install is:
<< 17.04.2013 - PhilZ-cwm6 v4.93.6 with CWM 6.0.3.1 based recovery >>
XWLSD (bootloop fixed)
http://www.mediafire.com/file/4cb3mf...3.6-signed.zip
http://www.mediafire.com/file/q642zb...4.93.6.tar.md5
Also I got SuperSU already installed, this means I have to unistall it and do this or can I install this kernel anyway?
Shade
Click to expand...
Click to collapse
No worries, Im happy to help.
If you already have superuser just download the "tar" file and flash it with odin as thats just the kernal.
Your build is LSD, download that one. which is philz 5.06.1
Your LSD build is quite old, have a look on samfilmware for your region as im sure you should get atleast LSW. Theres also LSZ and MS1 builds out.
Sorry here is the one you need
http://www.mediafire.com/download/q642zb02je6l1bb/PhilZ-cwm6-XWLSD-OXX-4.93.6.tar.md5
Sorry for being such a pain in the ass.
Well tbh, this phone is second hand, and the guy that sold it to me, had a custom rom on it but I asked him to flash it back to stock at the time. it came with stock 2.4 or something, but I updated it trough kies to 4.1.2. I looked around samfilmware and I only saw the build I have right now. I dont think I can update it
So I only need to get odin3, put the cellphone in dm, flash the new tar and thats it?
Shadeftw said:
Sorry for being such a pain in the ass.
Well tbh, this phone is second hand, and the guy that sold it to me, had a custom rom on it but I asked him to flash it back to stock at the time. it came with stock 2.4 or something, but I updated it trough kies to 4.1.2. I looked around samfilmware and I only saw the build I have right now. I dont think I can update it
So I only need to get odin3, put the cellphone in dm, flash the new tar and thats it?
Click to expand...
Click to collapse
What country do you live in?
yes thats it :good:
stonedpsycho said:
What country do you live in?
yes thats it :good:
Click to expand...
Click to collapse
Hi once more, and thanks for everything! Well, I managed to lose my fear of trying it and managed to flash it using the instructions from philz tread. Everything went all right!
I live in portugal, and my carrier is vodafone, I think that the build I have is the most updated one.
Really, thanks for helping me with this! :laugh:
Shadeftw said:
Hi once more, and thanks for everything! Well, I managed to lose my fear of trying it and managed to flash it using the instructions from philz tread. Everything went all right!
I live in portugal, and my carrier is vodafone, I think that the build I have is the most updated one.
Really, thanks for helping me with this! :laugh:
Click to expand...
Click to collapse
Well done :good:
Your next step is flashing a custom rom Have a look at the link below. Battery life is amazing on this rom.
http://forum.xda-developers.com/showthread.php?t=1569686
MistahBungle said:
If you're running rooted 4.0.4 stock & you do a factory reset, there's a fair chance you'll brick your phone. For the technical version, Google/XDA search is your friend.
Click to expand...
Click to collapse
But the EMMC bug doesn't affect any S II phones with JB roms does it?
Correct (4.0.4 being ICS). Even if you have a susceptible chip, the firmware has to have the bug which causes the chip to be scrambled/corrupted, which means anything before 4.0.4 or anything after (or anything custom for that matter) poses no problems.
stonedpsycho said:
Well done :good:
Your next step is flashing a custom rom Have a look at the link below. Battery life is amazing on this rom.
http://forum.xda-developers.com/showthread.php?t=1569686
Click to expand...
Click to collapse
Well this is one step higger! From what I read, its not that complicated to do, still I love this phone dont want to ruin it! I think I'm going to try it out!
Do you have some advice for a noob like me regarding the procedments?
Shadeftw said:
Well this is one step higger! From what I read, its not that complicated to do, still I love this phone dont want to ruin it! I think I'm going to try it out!
Do you have some advice for a noob like me regarding the procedments?
Click to expand...
Click to collapse
It is simple. You could watch a youtube video just to see hows its done
http://www.youtube.com/watch?v=u5UrkOx0yZE
Any probs just give me a shout.
stonedpsycho said:
It is simple. You could watch a youtube video just to see hows its done
http://www.youtube.com/watch?v=u5UrkOx0yZE
Any probs just give me a shout.
Click to expand...
Click to collapse
I'm at work right now, so I can only do it after work. So I just need to, follow the instructions on the NEAT ROM post to flash it? They dont say how to backup your things tough but I searched in this forum and found how to do it-. So I only need to use the cwm to back it up. Does it back up EFS folder too?
You have been so far a really helpful dude, thanks mate! Was kinda afraid of posting something here, but turns out there is really nice people around here!
Btw if the mods want I can just PM you for some help instead of posting here.
Shadeftw said:
I'm at work right now, so I can only do it after work. So I just need to, follow the instructions on the NEAT ROM post to flash it? They dont say how to backup your things tough but I searched in this forum and found how to do it-. So I only need to use the cwm to back it up. Does it back up EFS folder too?
You have been so far a really helpful dude, thanks mate! Was kinda afraid of posting something here, but turns out there is really nice people around here!
Btw if the mods want I can just PM you for some help instead of posting here.
Click to expand...
Click to collapse
We were all noobs once.
Thats up to you mate, if posted on here it might help someone else out tho.
Yeh just follow Neatrom post to flash. I have never backed things up before flashing other than sync my contacts and pics but it is recommended.
There are loads of great roms out there flash afew and find one that suits your needs.
Tbh im not really sure about EFS but heres a post about it with a link to an app that will back it up
http://forum.xda-developers.com/showthread.php?t=1325369

Help!!! 9300 not rooted... stuck on samsung logo!!

HELLO HELP NEEDED
My sisters S3 i9300, never been rooted just got stuck on the Samsung S3 i9300 logo..
How do I go about it since I cant confirm the stock Rom or firmware to download. I cant get to the screen to check the country specific code. I can get to download mode and all it shows is
Odin mode
Product name: Gt-i9300
Custom binary download: 0
Current Binary:samsung official
System status: official
Please what is the way forward
Sorry I had to start a new thread for this....jux cant find the solution anywhere. My apologies
freexrythem said:
HELLO HELP NEEDED
My sisters S3 i9300, never been rooted just got stuck on the Samsung S3 i9300 logo..
How do I go about it since I cant confirm the stock Rom or firmware to download. I cant get to the screen to check the country specific code. I can get to download mode and all it shows is
Odin mode
Product name: Gt-i9300
Custom binary download: 0
Current Binary:samsung official
System status: official
Please what is the way forward
Sorry I had to start a new thread for this....jux cant find the solution anywhere. My apologies
Click to expand...
Click to collapse
What is it you would like to do? Keep it stock or root it?
start into recovery and do FactoryReset & WipeCache
Did that several times.. still stuck on the logo...
Grimzee said:
What is it you would like to do? Keep it stock or root it?
Click to expand...
Click to collapse
Maybe rooted, just so that I can flash a good stock custom rom... that is debloated, deoxed, good battery, camera etc...I may need suggestion wirh that one too....
I really appreciate u guys replying. .. thnx
You have bigger problems to solve first.
Go to sammobile.com and download the latest stock firmware for your own country.
Follow the instructions on how to flash with odin.
If the flash works then factory reset in recovery, before you try to boot.
If the flash fails then you may find the reason it suddenly stopped working.
Thank u for your response.
Thats the main problem I have. The phone is being used in Ghana now. I could have checked if could get to at lest the screen.
How can I check for the country when the fone wont get me to the screen. On top of that... its stocked and not rooted!
Root is not needed for flashing stock firmware.
Original country is irrelevant, use your own.
Okay sir, will proceed and get back to u...I appreciate the suggestions.
Once you have done what @boomboomer has said then we can help you with rooting and rom's, that is if you still want to root it.
boomboomer said:
Original country is irrelevant, use your own.
Click to expand...
Click to collapse
Firmware MUST coincide with the original one, otherwise possibly bricking.
rp158 said:
Firmware MUST coincide with the original one, otherwise possibly bricking.
Click to expand...
Click to collapse
but I dont know the original firmware that came with it. What I do know is that.... its never been rooted or flashed before when bought
Go to a SamsungStore. Perhaps they can find out the country-code by the codes on the label behind the battery. But perhaps there are still other&better idea's...
rp158 said:
Firmware MUST coincide with the original one, otherwise possibly bricking.
Click to expand...
Click to collapse
No, this isn't true.
Only the model number of firmware must match the phone to avoid brick. CSC makes no difference and even region lock is irrelevant, if it worked in that country before.
Make sure you understand details yourself before advising others, although you did no harm in this case.
boomboomer said:
No, this isn't true.
Only the model number of firmware must match the phone to avoid brick. CSC makes no difference and even region lock is irrelevant, if it worked in that country before.
Make sure you understand details yourself before advising others, although you did no harm in this case.
Click to expand...
Click to collapse
Okay I got it working one 4.3....thanx so much everyone. Now I wanna root and find a Rom that gives me max battery life...close to the stock as possible and also better camera quality. Also debloated....
Suggestion: NCS-ROM 8.1
Use it since 1 year and return always after trying another rom.
Thank you...will try that one too....am open to other suggestions too.... Roms close to stock but optimized for speed, debloated and very stable.

Categories

Resources