Hi guys, I searched internet and XDA high and low but didn´t find any answer on this (and it happened to me): The screen on my Xperia Ray was cracked. I replaced it. The new original replacement is quite OK... but... The device is stuck on boot screen, showing only the SE logo. Right after I put it together. Fine...there are milions of similar threads, right? All of them give advice about flashtool and other stuff. I´ve tried all that. The phone will update the firmware, will flash, will even charge the battery, but it won´t get past the Sony Ericsson (after update only SONY) logo. I´ve checked everything, even connectors inside...nothing. It did the exact same thing with the original firmware as well as with the new, updated one. Isn´t there something like "hardware lock" for non-original spare parts? (sounds crazy to me) So the question is: Shall I just use it as a door wedge?
P.S.: I´m more than sure that I didn´t damage any components inside + I deal with electronics on daily basis so I have some experience.
Thanks. I appreciate any clue or help.
kopferkingel
Static electricity while replacing the device's screen? It could've easily damaged your device .
See this:
static electricity and electronics
Sent from my ST15i using xda app-developers app
I think this is highly unlikely the case since i was working in rubber gloves and was wearing a small metal chain connected to the central heating radiator (grounded). I always do this when working with sensitive electronics. It is one big mistery. I flashed the device with original Sony update using their original tools and now it won´t even charge battery. How sad.
You never know about static electricity! You'll be so guarded against them but somehow they'll creep in. They are the real devils for electronics!
Sent from my ST15i using xda app-developers app
reflash stock rom any xxxxxx
Didn´t help....
eltonpestana said:
reflash stock rom any xxxxxx
Click to expand...
Click to collapse
I did exactly that, and it didn´t help. I´m still stuck with Sony Ericsson logo and the phone won´t boot further.
patch you can try your brick
kopferkingel said:
I did exactly that, and it didn´t help. I´m still stuck with Sony Ericsson logo and the phone won´t boot further.
Click to expand...
Click to collapse
Try this if it works friend buy me a ceveja. http://www.mediafire.com/?s166qsg8qaaxc43 Extract the zip file and put the file. tft inside the firmware folder flashtools. and blinking. With this patch you can try your brick
kopferkingel said:
I did exactly that, and it didn't help. I'm still stuck with Sony Ericsson logo and the phone won't boot further.
Click to expand...
Click to collapse
I had the same problem with mine, it stayed for a while on sony logo, and after some time it reboots... The problem IS INDEED static electricity, some sensitive capacitors which are related to flash memory are damaged. This is how i managed to start it (i was desperate, i needed the data), i left it on sony logo, until the battery died, and when i try to turn it on, i got red light blinking. Connected the charger, and turn on the phone as soon it starts charging - stuck on sony logo... So i tried again, and again, and again, and it worked! I don't know how, but the phone booted! I knew that if i turn it off, it won't boot again, and i was correct. So i tried again with my trick, and after few tries, it worked again. I had the phone up and running 5-6 days without shutdown, and afterwards i could turn it off/on without problems, but for short intervals (sim change/flash using recovery), and it was working fine until 2 weeks later when i accidentally got it wet (a few drops - enough for the headphone symbol to come up), so i turned the phone off and left it to dry. After that it didn't wanted to boot again, so i opened it up, to check for moisture, but it was completely dry... I had trouble starting the phone, AGAIN it just stayed on the SONY logo and after A LOT of tries, i managed to start it again, it worked for a day, i turned it off, and that was the end of my story... Since then i never managed to start the phone again, just sony logo, and one more thing - when i enter recovery, bunch of errors come out - can't mount data, can't mount system, can't mount anything! I guess this was the problem from the start, but this time the water finished the job, and scre*ed up the phone completely...
Related
Hi all,
yesterday I used an emergency method for the second time which saved my phone even when SEUS doesn't respond. Please note:
1. This is an emergency method, if ALL other methods fail. If you are not comfortable with this, then don't do it.
2. I don't know if this works for the new Mini or either Pros.
3. You can damage your phone if you do this incorrectly, so take care, and you do this at your own risk.
4. If you are still in warranty, this can void your warranty if they detect what you've done.
5. If you're VERY new to all this phone modification stuff, you probably shouldn't do this. But, if you are new and all other methods don't work, then you can try this if you don't want to/can't afford to send away to repair.
Still in trouble? This is ESPECIALLY useful if your phone won't switch on, SEUS won't detect it and charging doesn't show LED. Do this:
1. Take off the back cover.
2. To the left of the camer lens is a rubber part covering the phone. At first, it looks like it won't move, but use something small and thin (like a pin or tack) to gently lift that up, and take it away. You need this so keep it.
3. Inside you will see a small white connector. This connects the battery to the rest of the phone. Use a tack or pin to gently pull back on the white part. When it does get loose, lift up.
4. After a few seconds, put that white connector back. I do it by laying it down and pushing in with the pin/tack, and push down. You must hear it click. Be very, very careful with this, it's delicate!
5. Put back the rubber connector and case.
Try switch on your phone now. Twice, this has helped me when ALL else failed...
**When you take off the rubber cover to the left of the lens, you will see this white tab as you can see in this picture. You use a pin/tack to drag that back, then press down again and push it into the phone to reconnect. This resets it.**
I have used this on the 2010 Mini, and I don't know about the 2011 Mini or either pros...
phoneyericsson said:
Hi all,
yesterday I used an emergency method for the second time which saved my phone even when SEUS doesn't respond. Please note:
[...]
Try switch on your phone now. Twice, this has helped me when ALL else failed...
Click to expand...
Click to collapse
can i add a link to this in my FAQ?
Thanks for the recovery solution!
Will check this method if my mini dont respond in future
Sent from my X10miniCM 2.1.1
matmutant said:
can i add a link to this in my FAQ?
Click to expand...
Click to collapse
Sure!
Honestly, this method has worked twice now (only needed it twice) and if the phone doesn't switch on, PC/laptop/SEUS don't detect it/no LED or anything...this STILL works...! It's a kind of hard reset we need, if soft reset (home and power) don't work.
can anyone confirm whether this works on the pro yet ?
tomvanoppens said:
can anyone confirm whether this works on the pro yet ?
Click to expand...
Click to collapse
If I understand it, this disconnects the battery from the phone. On the mini-pro you can just pull the battery.
Sent from my U20i using Tapatalk
Yes, that's right ^^ on the Mini of 2010 you cannot disconnect the battery like normal. This is how you can do it, and it really does fix many of the worst kinds of problems...it re-starts the connection of the phone.
Still not working ;(
i tried this method twice, and nothing happened...
my phone was working fine yesterday, woke up, found it turned off.
i tried to charge it, and it showed no signs of charging, no LED lights, no heat, nothing.
i tried to restart it using the power+home+back buttons, i tried to get it on flash mode, nothing worked.
its still off and NOT charging even though its been connected to the charger for like 2 hrs
anymore ideas?
Hi buddy.
There's something different with these smartphones. This happened to my Mini also. I contacted Sony Eric. and they said make sure your battery doesn't die completely. You must leave it charging in the wall for about 2 hours and wait for an LED (green) to show. If that doesn't work, then I'd try SEUS and repair the phone. If that doesn't work, then I'd try this solution. It really should be the LAST thing you do - if you're not very familiar with this you can break it.
And you tried this method and it did nothing? Really? You disconnected the white wire, waited 10 seconds and reconnected? Then I'd try charging for 2 hours WITHOUT trying to turn it on.
help me plzzzzzzzzzz
Hi!
can anyone help me!
i treied to root my x10 mini pro and something fail
Idont know what happen but i fowlloed the guid but i know that was my wrong i dont know what happend.
My x10 mini pro are breaked now when i try to turn it on it came just SONEY ERICSSON just it, itreied to uppdate by pc.companion but i could not uppdate it becuse the program didnot finde the device.
Can someone help me please.
Tanks!
That is common and you should be able to fix it. If all you did was try to root it, I'm not quite sure what failed. This happens sometimes if you try to put a new operating system (ROM) on the device but something goes wrong.
And PC companion doesn't detect your device?
If not...there is another Sony Ericsson program called SEUS (Sony Ericsson Update Companion). Use that instead and tell it to repair your phone. To do so, you connect your phone to the PC, press the power button at the top of the phone AND the middle (menu) button on the front together...then your phone resets. If you have SEUS ready, it will connect your phone, your phone won't boot, SEUS will repair it. The light at the top of the phone will be green if this is working correctly.
Hi, i just bought bricked x10 mini for 20 bucks. I has no sign of life, no led indicator, etc. It's not detected by seus. I also disassembly it to check physical damage( i didn't find any damages).
Phone just won't turn on. Lets check if 2hours charging is working for my case.
Yes, try the charging thing. Sony Ericsson told me to do this by email. I had no idea that smartphones worked like that, but yes. It could have life but not show for 2 hours of charging. (They said DON'T try to turn on the phone while it's trying to charge in this case).
If none of that works then try more extreme methods, like the one I mention with the white cable.
Good luck!
still no luck with charging solution. actualy i've disassembly it so practically i have done your solution. i will go check more deeper about the problem. the worst case is IC failure.
Thank you for the tip phoneyericsson!
I didn't find it hard to do -- I pulled off the ruber thing with a nail, and tweaked out the plug with some small scissors.
I was stuck at the SE logo, and couldn't turn of my phone or enter CWR. I wanted to set it back to standard using SEUS. Instead of using the method mentioned in option 2 here, I simply pulled the white plug to the battery, which turned of the phone. Then I inserted it again and the phone stayed off. Then I simply did as SEUS asked, and now I'm back running, ready to get CMmini on my device again!
That's great to hear! ^^
Hey guys, i bought an x10 yesterday, the seller told me straight up that it wont boot, red led flashes 3 times thats it. (he tried to restore his unit with seus after it randomly crashed). When i met him, i swapped his battery for mine and no more red led but still wont boot. I was able to get it in flash mode so i figured, restore with seus and all would be ok. When i got home, tried restoring with seus and when i got close to the end, it failed. Keeps telling me my battery is dead but when i pop it in my other x10, its at around 80%. So, started flashtool and tried it that way but fails towards the end of the process. Even the new flashtool 3.0 didnt work. Gave up for a bit but then retried. seus failed twice but on 3rd try, it worked. Now, the phone will vibe when i hit the power button, green led flashes and screen kinda turns on but no SE logo, then powers off and restarts the boot (still no SE logo). I put in a full battery and left it that way all night. this morning, red led blinking 3 times again. I changed the battery and it still tries to boot but ends up in a loop. Ive been searching all kinds and no fix is available from what i understand. im really confused atm. hardware issue?
Could be motherboard..
This may not apply to the X10 but my sister's X10 Mini Pro went through a fairly similar issue. The phone was stuck in a bootloop with the SE logo, bootanimation, repeat. No matter what we tried, we could not get it to boot properly. She hadn't made a backup and banned me from doing a repair flash of the firmware so I was trying a load of other options (all the while telling her that the only way out was a flash).
I have an EP900 battery charger so randomly decided to charge up her battery to 100% and give it a try. Boom, booted up perfectly. Used the battery down to 20% and tried to reboot, bootloop again. For some reason the phone doesn't boot without a fully charged battery (didn't try charging it with the phone, only the external charger).
Dunno if this will apply to you, but it may be worth a shot. Otherwise, I'm inclined to think you have a mobo problem. Maybe the seller tried unlocking the bootloader and bricked it?
so.say.we.all said:
Maybe the seller tried unlocking the bootloader and bricked it?
Click to expand...
Click to collapse
Thats what i thought at first, who knows.... Bout the battery, i tried a fully charged one too but no go. Also,tried to repair my phone with pc companion but still wont boot up... out of options, im 99% sure its the mobo as well...
Not sure, what the issue is, but you can try the following:
1. Try charging the battery for quite a while, and forget about the phone for 2 hours, for me a few months back. I slept while xrec was on, and in the morning it was showing me the red light......I charged it for two hours which brought my phone back to life.
2. You can use SEUS to update your phone, which will wipe the entire thing and get you a fresh new GB stock. Then you can play with it.
sudip.h said:
Not sure, what the issue is, but you can try the following:
1. Try charging the battery for quite a while, and forget about the phone for 2 hours, for me a few months back. I slept while xrec was on, and in the morning it was showing me the red light......I charged it for two hours which brought my phone back to life.
2. You can use SEUS to update your phone, which will wipe the entire thing and get you a fresh new GB stock. Then you can play with it.
Click to expand...
Click to collapse
1. Battery isnt the problem, as i have 2 to play with
2. Tried that, but either it fails, or if it does go thru, it still wont boot.
It wont even show the "Sony Ericsson" when its powered up. Can it be possible, the guy played around and messed up the files required for this unit to boot? Is that even possible?
slikk76 said:
1. Battery isnt the problem, as i have 2 to play with
2. Tried that, but either it fails, or if it does go thru, it still wont boot.
It wont even show the "Sony Ericsson" when its powered up. Can it be possible, the guy played around and messed up the files required for this unit to boot? Is that even possible?
Click to expand...
Click to collapse
if you destroy tthe kernel - yes.
Sent from my X10i using xda premium
I bought a X10i a few months ago, then the USB port broke. I sent it back to the eBay seller for a new one. I picked it up yesterday. At first, it was ok.
When I started rooting/flashing 2.1, I started getting random crashes while booting. Tried other ROMs, including official Gingerbread, but it always crashed at the lock screen. Tried to take the SD card out, and it didn't help. Then I took the SIM card out and that worked for a bit. It seemed like a bad SIM card.
Then, it started crashing even without the SIM card. I took everything out and it was still crashing. After repairing the gingerbread, the screen stopped working.
Currently, when I press the power button, the green LED flashes briefly and the unit vibrates (sometimes short, sometimes long). The screen, however, is completely dead. It doesn't light up at all, not even with "SONY ERICSSON".
Any help? I'm wondering if there's a problem with the screen.
I may end up ditching this and getting a Xperia Neo from Newegg. Ironically, it's $50 cheaper now than the price of this X10i on eBay back in July. I'd rather not have to switch, though.
Edit: I took the case apart to check the various ribbon connectors (I don't plan on returning it anyhow). They were ok. What the eBay sellers do is they take apart the entire kit and resell the original components at a higher price. When you buy one, they grab a mainboard, stick it in the case color you want, throw in some OEM charger/cables/battery, and then ship it in the original box. That's why you might receive a black X10i while the box and its IMEI label say that it's white.
Were you able to complete a flash successfully? If so what Rom and BBand are you on?
Well, after the screen stopped working, I used Flashtool to successfully flash generic gingerbread. After it didn't work, I used PC Companion. PCC successfully repaired, but the screen still doesn't turn on. I know it is running something, though. The battery gets warm.
Edit: After repairing, I think I should be on BB 71.
Edit 2: I should mention that I have two batteries (one official, one OEM that came with the phone) and the EP900 charger. Both batteries were charged overnight, so it's not a dead battery problem.
Edit 3: I was looking at some Xperia Neo/Arc threads and they mentioned that the Trim Area may have been damage (or something like that). I'll try flashing the device with the same generic Gingerbread after I get home to see if that helps. My bootloader is still locked. Might even try a 1.6 ftf.
I've tried 2.1.A.435, 2.1.B.0.1, 3.0.1.G.0.75, and SE PCC. None are working. I'm still getting a single green LED flash and vibration. No more, no less.
Edit: Also tried SEUS. No dice.
Edit: No problems flashing anything, so it is clearly some sort of soft brick. Changing thread title to reflect this.
I hate to say this to anyone, but I think you may have a hardware problem. I hope I'm wrong but the things you have done should have fixed the problem, in my thoughts the main power board," mother board" may be faulty.... Hope I'm wrong.
Yeah, I thought all that flashing would have fixed it. I'm leaning a bit towards a bad flash or something. I'll probably return to the X10 one day and replace some parts.
I just hope the Neo I just ordered won't be as temperamental. I guess I just got lucky and never had any problems with my trusty G1.
My friend's X10i also have this problem, it will connect in flash mode ONLY when I took the battery out for 10 seconds then put it back in.
The phone doesn't have sim or sd. After I flash the generic 2.3.3 it will boot, but it will randomly shuts off and does not turn on.
I have to take out the battery for 30 minutes+ then it will boot, but it will still randomly shuts off while charging or just idling for an hour or so..
x126 said:
My friend's X10i also have this problem, it will connect in flash mode ONLY when I took the battery out for 10 seconds then put it back in.
The phone doesn't have sim or sd. After I flash the generic 2.3.3 it will boot, but it will randomly shuts off and does not turn on.
I have to take out the battery for 30 minutes+ then it will boot, but it will still randomly shuts off while charging or just idling for an hour or so..
Click to expand...
Click to collapse
By "Does not turn on" do you mean at all, or won't boot?
thelastredshirt said:
By "Does not turn on" do you mean at all, or won't boot?
Click to expand...
Click to collapse
You are right, the phone died again just now. When I press the power button it does NOTHING at all, if I take out the battery for 10 sec and put it back in it will vibrate and still doesn't turn on. If I take the battery out for 30 minutes then it will boot and run perfectly fine only for an hour before it dies again.
Hi,
My x10 mini pro started to act "funny" (restarting and shutting down by it self) so I found this forum. Kept reading a lot of posts for 6h until I decided to try flashing it with a costum rom to fix it.
Flashed via flashtool the Sony Style's 1.1 by paul-xxx; it worked for a while, then shut down again. But this time, with flashing red light (3 times, with hard-reset [home+power button] when trying to turn on and a looping red light (every 3~4 seconds) when trying to get to flash mode.
After some time, it vanished from existence and was presumed dead. No lights, nothing at all. Send to repair, they couldn't fix it, but they restored the lights (red loop again).
So, now it got dead again. I have two batteries, both charged, but still nothing.
I really don't know what to do. I thought it was HW damage, but the repair guy said it was software corruption.
So, any light on my head ? :/
Mazzocato said:
Hi,
My x10 mini pro started to act "funny" (restarting and shutting down by it self) so I found this forum. Kept reading a lot of posts for 6h until I decided to try flashing it with a costum rom to fix it.
Flashed via flashtool the Sony Style's 1.1 by paul-xxx; it worked for a while, then shut down again. But this time, with flashing red light (3 times, with hard-reset [home+power button] when trying to turn on and a looping red light (every 3~4 seconds) when trying to get to flash mode.
After some time, it vanished from existence and was presumed dead. No lights, nothing at all. Send to repair, they couldn't fix it, but they restored the lights (red loop again).
So, now it got dead again. I have two batteries, both charged, but still nothing.
I really don't know what to do. I thought it was HW damage, but the repair guy said it was software corruption.
So, any light on my head ? :/
Click to expand...
Click to collapse
If You're still able to enter into flash mode, try the SEUS restore.
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Then show it to Your repair guy...
Cheers,
M.
mum_laris said:
If You're still able to enter into flash mode, try the SEUS restore.
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Then show it to Your repair guy...
Cheers,
M.
Click to expand...
Click to collapse
No flash mode. That's my curse ç.ç
If I could just get it up, SEUS is waiting for it.
Mazzocato said:
No flash mode. That's my curse ç.ç
If I could just get it up, SEUS is waiting for it.
Click to expand...
Click to collapse
Dont know if it can help. .but give it a try with a new connecting wire.. maybe the connecting wire/port is damaged.. because it was the same with one of my friends.. he replaced with a new battery n a cord n it got fixed.. give it a try.. till then will search for u.. if found will post back..
Used a new one, from my girlfriend's 2011 mini pro, bought a new battery and fully charged on another phone. Still, no flash mode.
I would say that the port of the phone is out, but the repair guy used it with no problems... as he said.
The phone was hers, but she bought a new one. once this turned into a brick.
If I fix it, is mine... but, maybe there is no solution... :/
Just confirmed: Battery isn't the issue here. Recharged them to 100% and still the phone won't give a single sign of life.
Apparently, I'm doomed. I don't have money to buy fixing boxes and cables, but it really pains me out.
I already downloaded all the cooking material to start working on it, but... I guess it's dead.
As I searched, x10 mini pro doesn't have a test point, but a cable set up in the back board. But I couldn't find the schematics, just boxes... that will cost me a LOT.
I'll be watching the thread and test new options you guys give me... but that's all.
Sorry to bother you all with this issue..
Red light blinking again. 3 with home+power and constant bliking red connected to PC or trying flash mode. I'm confused now >_>
Mazzocato said:
Red light blinking again. 3 with home+power and constant bliking red connected to PC or trying flash mode. I'm confused now >_>
Click to expand...
Click to collapse
but if You:
- open flashtools on Your pc
- connect phone by cable - also powered-off, what did You read from flashtool?
Here You can find it...
http://forum.xda-developers.com/showthread.php?t=826455
Let me know...
Cheers,
M.
Phone isn't detected.
EDIT: It doesn't respond with or without flash mode. But when I disconnect it from the cable, he blinks a red light 3 times in sequence. Same with home+power.
Mazzocato said:
Phone isn't detected.
EDIT: It doesn't respond with or without flash mode. But when I disconnect it from the cable, he blinks a red light 3 times in sequence. Same with home+power.
Click to expand...
Click to collapse
You've also installed the Gordons Gate drivers before doing Your tests?
from the flashtool folder install <flashtool folder>\drivers\gg-????.exe
Then reboot pc and re-try...
Yep. GG-setup.exe installed. Restarted.
Phone looks "dead". But it blinks red lights without the charger / cable usb.
Odd.
EDIT: Left charging on the wall with red blinking light. Dead again. No sign of life whatsoever.
Update:
Noticed that it "ignores" my attempts on the screen buttons. Back and home = same reaction... as if I wasn't pressing them.
I'm thinking that I've got hardware problems... or some HARD software issues. =/
Help NO gsm!!!
Hi I tried to unlock bootloader but after going through the tests my gsm failed to start working phone just says please insert sim card but there is nothing wrong with the sim. Please need advice
Hey guys,
Went to use my phone yesterday, never flashed or anything like that, and it just wouldn't respond. When I plug it in the sony logo flickers every 7 seconds and it won't respond to any button combination for rebooting. When it's not plugged in I can't get any sort of response.
Please tell me someone has encountered this before.
Same problem
Hi I have the same problem. Only is that the screen flickers every 0.5 seconds with SE logo.
I downloaded the repair tool but not abLe to process the repair on my phone. Nothing works. Opened the phone, removed the battery plug, tried to power on the phone without the battery plugged-in, nothing. Please help.
Sony repair wont help me. Apparently there is calcium on the magnetic ports or liquid damage in the phone; no liquid damage at all, phone was never put in water and nor any of the white stickers turned red.
Mikerc21 said:
Hey guys,
Went to use my phone yesterday, never flashed or anything like that, and it just wouldn't respond. When I plug it in the sony logo flickers every 7 seconds and it won't respond to any button combination for rebooting. When it's not plugged in I can't get any sort of response.
Please tell me someone has encountered this before.
Click to expand...
Click to collapse
Maybe due to corrupt software. Try flashing a new firmware using flashtool.
Hey guys, got some update from a repair center I usually deal with. It seems that the motherboard is dead. According to them, it seems that the battery might have been overheating and might have affect the motherboard. I'm going to try to call the sony mobile tech support and see if a repair mailer could be sent to me and going to keep you posted.
Cheers,
Gabriel