Hallo XDA Friends,
I have a problem with the LED on my month old s3 ( euro unbranded )
Everything was going great with the LED I Installed Light flow everything was still fine.
I updated to JB official stock rom as i am unrooted, and since then the LED only works when
i boot up the phone and when i use the Test utility ( red green blue ) colours. With lightflow uninstalled
and no LED management software still nothing works. Also not with screen off.
Now I am stuck because it clearly is not a Hardware problem as It works on boot and in test mode,
But not in anny other situation.
I hope someone here can help me and thanks in advance!
Backup data and factory reset .
jje
Related
Hello i recently updated my htc hd2 phone to - official ROM version 3.14.479.2, Radio version 2.15.50.11U from the site - htc.com. My problem is that the camera flash light does not work when switch to always on mode. The flash light would be not on until I take a photo which acts the same as the auto mode.This problem is in camera mode.IT WORKS TOTALLY FINE IN THE CAMCORDER MODE!
Battery is 100%
Soft reset doesn`t help!
Is there any registry solution what to do or only hard reset (htc technicians couldn`t find solution and adviced me to do hard reset)
sekojpetokurdajadam gmail com
Thanks in advance for your help.
Hi,
Somedays back My phone just got stuck at the boot animation... So I restored it to its factory rom: upai_n9880I stock rom: 20120804_e1811_v75_jbaol1_g88. But when I went using the camera, the camera was inverted and if I turn in to lanscape, it would rotate but get inverted like in portrait mode. Now the games were also working flipped... The guy in Temple run now turns right if I tilt to the left and so forth.
So I tried flashing the phone with Taiwan upai N9880_ICS_V.01... but the issue remains. I tried reformat the flash and re-installed Taiwan Rom... the issue remians.
Can someone let me know how to fix it. I am new to all this and want to get it fixed if possible
Thanks,
Bharat
Anyone!
Anyone!
Hello
I have exactly the same problem and I would have wanted to know if you found a solution? Thank you
n9977
samiou57 said:
I have exactly the same problem and I would have wanted to know if you found a solution? Thank you
Click to expand...
Click to collapse
Hiya
My android phone which is a a chinese n997 keeps on rebooting and loops I have done the factory reset the delete the cache.
it is a android ver:4.0.9 BB Chip : MT6577 . I dont know what else to do . I am a noob
Hello XDA, Hello Android friends
have a weird problem and hope you can me help to fix.
i rooted my i9305 (with odin) and tried 10 Roms (flashed with CWM) . Every ROM has the same problem.
I will start my phone it boots normaly...it starts normaly too with 32bit colormode...with every colors and no problems.
After a half till one Minute it changes in negativemode.
Everything is "Negative" ... like the Picturenegative ....
It can't be that the display is damaged or? cause it boots and start normaly.
What can i do to get the normalmode again? It looks really ugly.
Pls help.
Thanks
Xperience Z said:
Hello XDA, Hello Android friends
have a weird problem and hope you can me help to fix.
i rooted my i9305 (with odin) and tried 10 Roms (flashed with CWM) . Every ROM has the same problem.
I will start my phone it boots normaly...it starts normaly too with 32bit colormode...with every colors and no problems.
After a half till one Minute it changes in negativemode.
Everything is "Negative" ... like the Picturenegative ....
It can't be that the display is damaged or? cause it boots and start normaly.
What can i do to get the normalmode again? It looks really ugly.
Pls help.
Thanks
Click to expand...
Click to collapse
what rom are you running at present? you can disable negative colors in accessibility settings.
sriram231092 said:
what rom are you running at present? you can disable negative colors in accessibility settings.
Click to expand...
Click to collapse
actually this rom
http://forum.xda-developers.com/showthread.php?t=2118686
omg...it works....thanks a lot
Settings -> Assibility -> Negative Colors
Hi, prblem with my g925f star after flash with stock room, alfer it phone hand on samsung logo. I fixed it by flashing unikernel by odi. But now capctice touch key light not working, kyes are working but with no light, also light sensor not working coretly. When i run test menu it work and schow corect wolus, but when i make a call dispay always getting dark. i TRY ALEX V kernel, unikernel 8.02, and hacker unikernel , on all karnels same problem. I have twrp and flashen few custoom rooms, only one one ligdt sensor works ok, but keys lighst not working, but on other light snesor not working, but right keys start light HARDWARE IS 100% i try another lcd - sam problem. Any idea?
i also try samsung button light app - still not working
I had the same problem with stock rom and stock kernel. Wiping didnt changed anything. It fixed by itself after a while. In test menu everything worked. I hope it will fix the same way for you as for me.
The LED notifications stopped working since I updated to OOS 3.x (MM 6.0.1) a couple of months ago.
Before that, everything was fine with LED.
LED only works when charging (red, green when fully charged), so the problem is not on harware side.
On Settings / Sound & Notifications / App Notifications all apps have LED notifications selected.
Also, I have tried to install a 3rd part app to activate LED notifications and I have granted it notifications access, but still nothing.
My bootloader is unlocked, and few days ago I have flashed TWRP recovery and SuperSu, but the problem was present also when the phone was fully stock (except that for the bootloader unlocked).
I couldn't find any solution other than attempting wipe data or factory reset :crying:
Any other suggestion?
Thank you.
godai74 said:
The LED notifications stopped working since I updated to OOS 3.x (MM 6.0.1) a couple of months ago.
Before that, everything was fine with LED.
LED only works when charging (red, green when fully charged), so the problem is not on harware side.
On Settings / Sound & Notifications / App Notifications all apps have LED notifications selected.
Also, I have tried to install a 3rd part app to activate LED notifications and I have granted it notifications access, but still nothing.
My bootloader is unlocked, and few days ago I have flashed TWRP recovery and SuperSu, but the problem was present also when the phone was fully stock (except that for the bootloader unlocked).
I couldn't find any solution other than attempting wipe data or factory reset :crying:
Any other suggestion?
Thank you.
Click to expand...
Click to collapse
Did you try mega unbrick guide?
Give it a try.
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
I am suggesting it because once I had broke my all sensors by flashing experimental build of ROM and flashing stock and other ROM didn't helped me so I followed mega unbrick guide and fortunately all sensors are working after that..Give it a try.
farooque7508 said:
Did you try mega unbrick guide?
Give it a try.
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
I am suggesting it because once I had broke my all sensors by flashing experimental build of ROM and flashing stock and other ROM didn't helped me so I followed mega unbrick guide and fortunately all sensors are working after that..Give it a try.
Click to expand...
Click to collapse
Thank you.
The problem is that the mega unbrick solution wipes all data, and I would like to avoid this.
Also, led is not "frozen" all the time: it works when charging, only led notifications are disappeared [emoji28]
Anyway....I'll consider your suggestion as my last chance [emoji6]
godai74 said:
Thank you.
The problem is that the mega unbrick solution wipes all data, and I would like to avoid this.
Also, led is not "frozen" all the time: it works when charging, only led notifications are disappeared [emoji28]
Anyway....I'll consider your suggestion as my last chance [emoji6]
Click to expand...
Click to collapse
I had the exact same problem with 3.1.3. To fix I went to extreme measures and wiped everything clean. Then went up the latter flashed 2.2.3 followed by 3.1.3. I believe somewhere along the lines of flashing something got broken. Work of advice if your going to do it this way use the old stock recovery. Or you will end up like the lost sould under helpme section.
Exodusche said:
I had the exact same problem with 3.1.3. To fix I went to extreme measures and wiped everything clean. Then went up the latter flashed 2.2.3 followed by 3.1.3. I believe somewhere along the lines of flashing something got broken. Work of advice if your going to do it this way use the old stock recovery. Or you will end up like the lost sould under helpme section.
Click to expand...
Click to collapse
Thanks.......very extreme measure, maybe even too much extreme to me [emoji28]
But, if I don't have any other solution, sooner or later I'll proceed with a clean installation from the scratch.
Inviato dal mio ONE E1003 utilizzando Tapatalk
I eventually found by chance a workaround to my problem.
It only works for rooted OPX with Xposed framework.
By installing Custom Slider Xposed module and adding the [Notification LED] / [Allow LED to Glow] action to each of the three [Slider Position Mapping] settings the LED notifications magically have started working again