Although already posted in the unlocking section.
Download firmware for your Nokia 920 through this software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tids2k said:
Although already posted in the unlocking section.
Download firmware for your Nokia 920 through this software.
Click to expand...
Click to collapse
Can we de-brand a Rogers Lumia using this as well? Thanks for your input and contributions
hkalltheway said:
Can we de-brand a Rogers Lumia using this as well? Thanks for your input and contributions
Click to expand...
Click to collapse
I would be interested in cross-flashing to a different firmware too since I ordered my Lumia 920 here in Germany and so it is very likely to come with that annoying EU imposed volume cap in place.
I would really love to put some non-EU firmware on my phone to get rid of that stupid cap ...
So any information about flashing to a different varian/firmware would be highly appreciated
thx
karlmueller
Thank you very much for this..
Im now considering buying a cyan sim free from best buy and importing it into the UK as it looks like it might be possible to get the device unlocked based on what I have seen posted elsewhere
Does it mean that I can buy t-mob and use it everywhere I need with wcdma or gsm?
Sent from my HTC Desire HD using xda app-developers app
karlmueller said:
I would be interested in cross-flashing to a different firmware too since I ordered my Lumia 920 here in Germany and so it is very likely to come with that annoying EU imposed volume cap in place.
I would really love to put some non-EU firmware on my phone to get rid of that stupid cap ...
So any information about flashing to a different varian/firmware would be highly appreciated
thx
karlmueller
Click to expand...
Click to collapse
What "volume cap" are you talking about? Mine is from Germany and I have no cap whatsoever ...
pencilcase said:
What "volume cap" are you talking about? Mine is from Germany and I have no cap whatsoever ...
Click to expand...
Click to collapse
You can't see the volume cap you can only hear it and to notice it you would need a non-capped device to compare their maximum volumes.
Unfortunately I'm still waiting for my Lumia 920 so I can't deff say if it's affected but for all the HTC Windows Mobile Phones I had so far the full volume setting wasn't nearly as loud with an EU based ROM as it was with a non-EU ROM.
As long as you only listen to "professionally recorded" / purchased music it's not a problem because with this even the EU-capped maximum volume is loud enough (unless you want to kill your ears of course).
But when you have non-professional live bootlegs from concerts you can't really listen to them with an EU-capped phone - at least not when you're in a noisy environment like out on the street.
Haven't figured out how i'm going to use it or get my lumia 920 unlocked yet but i'm seeing errors on 1232.2110.1244.3011 using EE firmware for white phone, DC_template_development_v4.bin causes a big .net exception
prd_signed.ffu dies at about 14% everytime you download with a webclient error, could be just nokia resetting the connection
blackpenny15 said:
Haven't figured out how i'm going to use it or get my lumia 920 unlocked yet but i'm seeing errors on 1232.2110.1244.3011 using EE firmware for white phone, DC_template_development_v4.bin causes a big .net exception
prd_signed.ffu dies at about 14% everytime you download with a webclient error, could be just nokia resetting the connection
Click to expand...
Click to collapse
Be interested to see if you fix this mate..
DC_template_development_v4.binWhat is the product number you are using to download?
Is this file any good? Its from the Yellow UK firmware:DC_template_development_v4
Firmware download
Hi all
I have the White 920 EE UK variant on order with a delivery date of 8th to 14th November!
The only file I had trouble downloading was the DC_template_development_v4.bin file, which has been posted to this forum.
All the other files downloaded OK.
I noticed that this is the second version of the firmware for the variant that I have ordered, so perhaps this is why there has been some delays on shipping - because of a last minute software fix.
God bless
andrew-in-woking
Hi,
someone goes to download "DC_template_development_v4.bin" for 059Q9L9?
this:
AndyD777 said:
DC_template_development_v4.binWhat is the product number you are using to download?
Is this file any good? Its from the Yellow UK firmware:DC_template_development_v4
Click to expand...
Click to collapse
is designed for a product code ?
- 12.32.2109.1242.1001 (059R072)
or
- 12.32.2109.1242.1010 (059R1W6)
or
- 1232.2110.1244.3 (059R072)
or
- 1232.2110.1244.3011 (059R1W6)
???
THX
Has anyone flashed a 920 yet with different firmware?
Im looking at changing mine from UK EE (059R1W4) to CV GB (059R075)
Only thing stopping me is its not downloading the DC_Template_development_v4.bin will the device still flash without it?
Kev
---------- Post added at 02:54 PM ---------- Previous post was at 02:44 PM ----------
Update i downloaded with Navifirm 1.6+ and it all downloaded.
sutt359 said:
Has anyone flashed a 920 yet with different firmware?
Im looking at changing mine from UK EE (059R1W4) to CV GB (059R075)
Only thing stopping me is its not downloading the DC_Template_development_v4.bin will the device still flash without it?
Kev
Click to expand...
Click to collapse
I'm new to win phone 8. How do I flash a different firmware? I could download the firmware I wanted for my Lumnia 920. But now I don't know the next steps.
Please help!
Yes U can flash difer PC
Update
Nokia suite wouldnt allow me to reflash the firmware just by changing the number like the wp7 Lumia.
Has anyone managed to do it yet?
sutt359 said:
Has anyone flashed a 920 yet with different firmware?
Im looking at changing mine from UK EE (059R1W4) to CV GB (059R075)
Only thing stopping me is its not downloading the DC_Template_development_v4.bin will the device still flash without it?
Kev
---------- Post added at 02:54 PM ---------- Previous post was at 02:44 PM ----------
Update i downloaded with Navifirm 1.6+ and it all downloaded.
Click to expand...
Click to collapse
sutt359 said:
Update
Nokia suite wouldnt allow me to reflash the firmware just by changing the number like the wp7 Lumia.
Has anyone managed to do it yet?
Click to expand...
Click to collapse
Hi below is quoted from another forum.
Download & install Nokia Care suite
Download DC_template_development_v4.bin and place in the "C:\ProgramData\Nokia\Packages\Products\rm-821" directory (or wherever your care suite set itself up for)
Install "WinUSB Drivers<architecture>.msi" from "C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers" (assumes x64 PC)
Run Nokia Care suite then run Product Support Tools
Connect the phone and let it be detected
Boot the phone into testing mode
Open device manager & find all the unidentified devices (check by unplugging and re-conecting the phone) there were about 8 for me.
Right click on each one and update the driver manually, show all hardware and select "Nokia phone"
From Tools, Firmware Downloads search for "059R075" and download files
When downloaded open "RM821_059R075_1232.2110.1244.3_035.vpl" from the packages folder
Edit line 12 (<ProductCode>059R075</ProductCode>) with the code for the EE firmware (059R1W4) so the line reads: "<ProductCode>059R1W4</ProductCode>"
Turn the phone off and then on while holding the up arrow. You should get to the Nokia boot-loading screen (Nokia logo with a cog)
Then choose "programming, Recovery" from the product support tool
Choose the downloaded image & click Start.
If you get a warning about being unable to connect to the phone do what it says and unplug the phone & power it off (hold both volume buttons and power for 5 seconds) then plug it back in.
Keep your fingers crossed for 5 minutes...
Click to expand...
Click to collapse
jms.flynn said:
Hi below is quoted from another forum.
Click to expand...
Click to collapse
Thanks jms I will give that a try tomorrow... do you know where to get the DC_template_development_v4.bin ?
Kev
Hi Kev,
https://www.dropbox.com/s/owwrhc339ex5wfm/DC_template_development_v4.bin
rb32 said:
I'm new to win phone 8. How do I flash a different firmware? I could download the firmware I wanted for my Lumnia 920. But now I don't know the next steps.
Please help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1605144
same software.....different phone, procedure as 900.
Related
Hi,
I have a friend who bought his SGS2 from Phones4U (UK).
He has updated it via ODIN to an unofficial firmware version but didn't bother checking what factory version of firmware was originally on the phone.
And now, yep, you guessed it he wants to revert back to factory so that Kies recognises his phone and will update through the "official route".
Does anybody know what version of firmware from the samfirmware site is the correct one for phones4u users here in the UK?
Any help would be appreciated.
Cheers,
Luke.
As this is my first post I can't link an image from my KIES.
Not sure if this is what you are really after but here goes.
PDA:KIA4/PHONE:KI1/CSC:KH2 (XEU)
Thanks for that info. Looks like he may need to download one of the XEU firmware versions...
Will get him to give it a go and report back.
Thanks again!
luke222010 said:
Hi,
I have a friend who bought his SGS2 from Phones4U (UK).
He has updated it via ODIN to an unofficial firmware version but didn't bother checking what factory version of firmware was originally on the phone.
And now, yep, you guessed it he wants to revert back to factory so that Kies recognises his phone and will update through the "official route".
Does anybody know what version of firmware from the samfirmware site is the correct one for phones4u users here in the UK?
Any help would be appreciated.
Cheers,
Luke.
Click to expand...
Click to collapse
Sammobile.com has all official firmwares listed under the firmware section, posted by country and service provider.
sean is here. said:
Sammobile.com has all official firmwares listed under the firmware section, posted by country and service provider.
Click to expand...
Click to collapse
Yep but it doesn't state which firmware represents Phones4U which is the problem as my mate didn't bother taking note of the factory firmware version that originally came with his device. Judging by the previous posters details on his phone (purchased from P4U) he needs an XEU (Europe) version so he's going to give one of the three European versions on there a go later.
luke222010 said:
Yep but it doesn't state which firmware represents Phones4U which is the problem as my mate didn't bother taking note of the factory firmware version that originally came with his device. Judging by the previous posters details on his phone (purchased from P4U) he needs an XEU (Europe) version so he's going to give one of the three European versions on there a go later.
Click to expand...
Click to collapse
Probably not a bad move. Once he flashes a stock ROM, he can update through Kies.
It could only be a problem if (big unlikely if) something goes wrong with the phone and he has to send it in for service, and then if the service people check the records (which is also not likely, if there's an official version of firmware and "custom counts" = 0).
sean is here. said:
Probably not a bad move. Once he flashes a stock ROM, he can update through Kies.
Click to expand...
Click to collapse
Don't you need to be correct in the ROM selection for this to work though? I.e. if you put the wrong stock ROM on, Kies will recognise your device but will tell you that it does not support the version on your device (something along those lines).
sean is here. said:
It could only be a problem if (big unlikely if) something goes wrong with the phone and he has to send it in for service, and then if the service people check the records (which is also not likely, if there's an official version of firmware and "custom counts" = 0).
Click to expand...
Click to collapse
Yep - i do have a jig to fix the counter issue but would prefer to get the correct ROM/firmware on before using it ...
Not sure if it's any help but got mine from phones4u. Here's the info from my settings screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope that helps!
Sent from my GT-I9100 using Tapatalk
luke222010 said:
Yep - i do have a jig to fix the counter issue but would prefer to get the correct ROM/firmware on before using it ...
Click to expand...
Click to collapse
Be aware, the jig doesn't work on new bootloaders. Mine didn't anyway.
sean is here. said:
Be aware, the jig doesn't work on new bootloaders. Mine didn't anyway.
Click to expand...
Click to collapse
Gutted!
It worked fine on mine, but i got my device within the first week of release...
Checkfus and download the firmware for whatever you want .
jje
Interested if it works as it might come in handy.
So do give us an update on how it went and how you did it.
Bit of a noob with the S2.
Hi Guys,
I've got a S2 on Tmobile UK and I wish to unlock it to enable me to use other network sims.
Im not entirely sure what to do with all these rom versions and firmware stuff etc ...
I've managed to root my phone via CWM.zip and using the SU-Busybox.zip ... now im not too sure what to do next to sim unlock. I've tried all the sim unlock programs from the market but they dont seem to work.
I dont want to install all these flashy things and wish to keep everything stock if possible.
Currently im using ICS 4.04
PDA : I9100BVLPH
PHONE : I9100BVLPE
CSC: I9100TMULPH
Thanks All!
phozy888 said:
Hi Guys,
I've got a S2 on Tmobile UK and I wish to unlock it to enable me to use other network sims.
Im not entirely sure what to do with all these rom versions and firmware stuff etc ...
I've managed to root my phone via CWM.zip and using the SU-Busybox.zip ... now im not too sure what to do next to sim unlock. I've tried all the sim unlock programs from the market but they dont seem to work.
I dont want to install all these flashy things and wish to keep everything stock if possible.
Currently im using ICS 4.04
PDA : I9100BVLPH
PHONE : I9100BVLPE
CSC: I9100TMULPH
Thanks All!
Click to expand...
Click to collapse
Which sim unlock apps have you tried?
kilometers4 said:
Which sim unlock apps have you tried?
Click to expand...
Click to collapse
Galaxy S Unlock - free - dont work
Galaxy sim unlock - this one havent tried needs to pay .... ideally want it done free
This is the one I used when I first got my device and it worked. (Free)
_https://play.google.com/store/apps/details?id=com.helroz.galaxysunlock&hl=en
This one is newer and more compatible but will cost small fee of about £1.60 to unlock device.
_https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en
TheATHEiST said:
This is the one I used when I first got my device and it worked. (Free)
_https://play.google.com/store/apps/details?id=com.helroz.galaxysunlock&hl=en
This one is newer and more compatible but will cost small fee of about £1.60 to unlock device.
_https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en
Click to expand...
Click to collapse
Do these work on the ICS I read they only work for gingerbread ?
would sim unlocking have any effect updating via kies again when Jelly bean gets released ?
Thank you
I was able to get the phone unlocked using the following app.
See the following Link and download the .apk file and install it on your device. But make sure you have rooted phone.
Link: http://forum.xda-developers.com/showpost.php?p=34187077&postcount=685
After you install it then you run it and there is a small gray bar at the bottom you just press that phone unlocked and you restart the device. Everything works fine. It worked for me I hope it works for you as well. Even if u have tried the same app before i suggest you still try the one on that link.
phozy888 said:
Do these work on the ICS I read they only work for gingerbread ?
would sim unlocking have any effect updating via kies again when Jelly bean gets released ?
Thank you
Click to expand...
Click to collapse
The second one works on GB/ICS/JB. I can confirm it works on JB as I recently used it after installing latest leaked JB sammy rom as that was sim locked.
sabeeh121 said:
I was able to get the phone unlocked using the following app.
See the following Link and download the .apk file and install it on your device. But make sure you have rooted phone.
Link: http://forum.xda-developers.com/showpost.php?p=34187077&postcount=685
After you install it then you run it and there is a small gray bar at the bottom you just press that phone unlocked and you restart the device. Everything works fine. It worked for me I hope it works for you as well. Even if u have tried the same app before i suggest you still try the one on that link.
Click to expand...
Click to collapse
trying this one now
sabeeh121 said:
I was able to get the phone unlocked using the following app.
See the following Link and download the .apk file and install it on your device. But make sure you have rooted phone.
Link: http://forum.xda-developers.com/showpost.php?p=34187077&postcount=685
After you install it then you run it and there is a small gray bar at the bottom you just press that phone unlocked and you restart the device. Everything works fine. It worked for me I hope it works for you as well. Even if u have tried the same app before i suggest you still try the one on that link.
Click to expand...
Click to collapse
Work for me! Thankz!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sabeeh121 said:
I was able to get the phone unlocked using the following app.
See the following Link and download the .apk file and install it on your device. But make sure you have rooted phone.
Link: http://forum.xda-developers.com/showpost.php?p=34187077&postcount=685
After you install it then you run it and there is a small gray bar at the bottom you just press that phone unlocked and you restart the device. Everything works fine. It worked for me I hope it works for you as well. Even if u have tried the same app before i suggest you still try the one on that link.
Click to expand...
Click to collapse
Yeah it worked !!! just another question
If I have now unlocked the phone can I still get the official jelly bean update when it comes out from Tmobile via kies ?
phozy888 said:
Yeah it worked !!! just another question
If I have now unlocked the phone can I still get the official jelly bean update when it comes out from Tmobile via kies ?
Click to expand...
Click to collapse
I never knew that S-II is gonna receive official JB update. lolllllz but if you want pure JB and fulls stock experience, try the leaked JB version for S-II on Sammy. Am usin it and its awesome
alvinasnow said:
I never knew that S-II is gonna receive official JB update. lolllllz but if you want pure JB and fulls stock experience, try the leaked JB version for S-II on Sammy. Am usin it and its awesome
Click to expand...
Click to collapse
I thought it was coming out sometime this month - i've seen lots of posts about this and search through Google seems so. Unless im wrong :/
It works!
sabeeh121 said:
I was able to get the phone unlocked using the following app.
See the following Link and download the .apk file and install it on your device. But make sure you have rooted phone.
Link: http://forum.xda-developers.com/showpost.php?p=34187077&postcount=685
After you install it then you run it and there is a small gray bar at the bottom you just press that phone unlocked and you restart the device. Everything works fine. It worked for me I hope it works for you as well. Even if u have tried the same app before i suggest you still try the one on that link.
Click to expand...
Click to collapse
It works for Me too, thanks a lot!!!
phozy888 said:
Yeah it worked !!! just another question
If I have now unlocked the phone can I still get the official jelly bean update when it comes out from Tmobile via kies ?
Click to expand...
Click to collapse
Unlocking has got nothing to do with updates, firmware does.
If kies sees you're rooted, might play hardball with your device.
Why people keep updating via kies? What if power goes off?
And who waits for branded updates to roll out????????????
I'm kidding, it's your right to do so.
---------- Post added at 09:33 PM ---------- Previous post was at 09:31 PM ----------
alvinasnow said:
I never knew that S-II is gonna receive official JB update. lolllllz but if you want pure JB and fulls stock experience, try the leaked JB version for S-II on Sammy. Am usin it and its awesome
Click to expand...
Click to collapse
It went out like 2 week ago, were you sleeping?
there seem to be many different guides on how to download ROMS, but either I'm being really stupid, or something is wrong.
I have a UK Lumia 920, unlocked but with EE firmware. I want to debrand it and put on the latest version of generic UK firmware. I have tried using NaviFirm 1.7 (and 1.6 and 1.5) but I recieve an error saying the connection is unauthorised, no matter which of the 3 servers I select. If I try to use Nokia care suite (product support tool for store) v 2013.8.3, I can open a product, but I can't view or download any firmware. I have tried the older version of the care suite (2012) but it had the same issue
I can see on some guides it states I need to use NaviFirm to download the firmware (which I cant do due to the error described above) and import it into Nokia care suite.
how can I download the firmware for me phone, and how do I go about flashing it? Am I using the wrong programs or reading outdated info?
I have Windows XP 32bit
Am pretty sure Nokia have stopped people from using their servers through Navifirm and Nokia Care suite, The last version I used that worked was on a Lumia 900 and was ver 1.5 but that was some time ago :crying:
It is still possible to download FW with the help of Nokia Care Suite - without any obstructions.
Install correct NCS and copy new *.cfg file. Then if you know the PC you can download i use to flash only NCS
So how do I go about doing it, because using the versions described above i cant do it. What is the 'correct version'. The 2013 version of NCS i used the cfg file but it didn't make much difference (not really sure what it does)
Sent from my RM-821_eu_euro1_276 using XDA Windows Phone 7 App
Correct version is in description on YT
djtonka said:
Correct version is in description on YT
Click to expand...
Click to collapse
Managed to get it to connect and download ROMs, but now I am stuck for which ROM i need. The main issue I have is that there is no 4G option on my phone. I thought I was using an UK EE ROM, but now I thoink I am using 'CV_GB_VAR270603_v5_confml_Black' ROM, as my operator show in the about section says 'CV GB'
I assume the ROMs described as 'global' the generic ones?
if anyone wants nokia lumia 920 firmware just give me your product code of phone and i will share you a link.....cheers
Lumia 920 firmware
n70shan said:
if anyone wants nokia lumia 920 firmware just give me your product code of phone and i will share you a link.....cheers
Click to expand...
Click to collapse
My product code is 059L848. Thanks
Correct version of NCS
matthewharmon102 said:
Managed to get it to connect and download ROMs, but now I am stuck for which ROM i need. The main issue I have is that there is no 4G option on my phone. I thought I was using an UK EE ROM, but now I thoink I am using 'CV_GB_VAR270603_v5_confml_Black' ROM, as my operator show in the about section says 'CV GB'
I assume the ROMs described as 'global' the generic ones?
Click to expand...
Click to collapse
I am also stuck in the similar situation, Please tell me which version of NCS you are using and please give the link from where I can download this version.
Thanks in Advance..
dcutting said:
My product code is 059L848. Thanks
Click to expand...
Click to collapse
here is link for all firmwares available for your phone. Enjoy
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
Djha said:
I am also stuck in the similar situation, Please tell me which version of NCS you are using and please give the link from where I can download this version.
Thanks in Advance..
Click to expand...
Click to collapse
ok guys take a chill pill....i m providing you a website to download and get authenticated firmwares for your nokia mobile....just enter your product code and Enjoy.........
http://www.mrcrab.net/Nokia-Product-Code.html
Link for Required version on Nokia Care Suite
n70shan said:
here is link for all firmwares available for your phone. Enjoy
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
ok guys take a chill pill....i m providing you a website to download and get authenticated firmwares for your nokia mobile....just enter your product code and Enjoy.........
http://www.mrcrab.net/Nokia-Product-Code.html
Click to expand...
Click to collapse
Thank you very much for sharing Link for Firmwares.
Please provide me the link for downloading corect version of nokia care suite.
Djha said:
Thank you very much for sharing Link for Firmwares.
Please provide me the link for downloading corect version of nokia care suite.
Click to expand...
Click to collapse
here you go......
http://www.schwantz-i.org/nokia/NokiaCareSuiteForStore-2013_1_3_4.rar
or you can also try this one
http://d-h.st/Fkd
n70shan said:
here you go......
http://www.schwantz-i.org/nokia/NokiaCareSuiteForStore-2013_1_3_4.rar
or you can also try this one
http://d-h.st/Fkd
Click to expand...
Click to collapse
i got NCS file, thank you.
Tell me 1 more thing, Can install a different firmware on AT&T LUMIA 920??
Djha said:
i got NCS file, thank you.
Tell me 1 more thing, Can install a different firmware on AT&T LUMIA 920??
Click to expand...
Click to collapse
y not you can install any lumia 920 firmware......but then it will be that region specific..... may be apps specific to that region also got installed
Lumia 920 World Unlocked Firmware
n70shan said:
y not you can install any lumia 920 firmware......but then it will be that region specific..... may be apps specific to that region also got installed
Click to expand...
Click to collapse
So you mean I can Install the unlocked world firmware too on AT&T LUMIA 920, after that my phone will be unlocked ?
Djha said:
So you mean I can Install the unlocked world firmware too on AT&T LUMIA 920, after that my phone will be unlocked ?
Click to expand...
Click to collapse
no man .........carrier cant be unlocked........ now take a chill pill and enjoy your device:angel:
Nokia Care Suite latest package
Latest full NCS package is available only on below Link::
http://blinkthinks.wordpress.com/2013/04/24/download-official-nokia-firmware-even-without-navifirm/
matthewharmon102 said:
there seem to be many different guides on how to download ROMS, but either I'm being really stupid, or something is wrong.
I have a UK Lumia 920, unlocked but with EE firmware. I want to debrand it and put on the latest version of generic UK firmware. I have tried using NaviFirm 1.7 (and 1.6 and 1.5) but I recieve an error saying the connection is unauthorised, no matter which of the 3 servers I select. If I try to use Nokia care suite (product support tool for store) v 2013.8.3, I can open a product, but I can't view or download any firmware. I have tried the older version of the care suite (2012) but it had the same issue
I can see on some guides it states I need to use NaviFirm to download the firmware (which I cant do due to the error described above) and import it into Nokia care suite.
how can I download the firmware for me phone, and how do I go about flashing it? Am I using the wrong programs or reading outdated info?
I have Windows XP 32bit
Click to expand...
Click to collapse
Hi Did you manage to upgrade your firmware in the end? I have a Lumia 925...I've only had it a few weeks, but already hear there is a new version of the firmware... which is great!... except Vodafone are unlikely to release it anytime soon.... I understand WP8 is a hard OS to crack in terms of rooting, but if anyone has a simple way of installing official Nokia ROMs - it would be really useful to know. Cheers!
Hi, my product code is 059P632 RM-821 LIGHT SWAP ENG GLOBAL.
Do u have the download link for this model's latest FW?? much thanks
I have rebranded my mate 10 to C432B141 (beta version I think) links for it below:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1881/g1750/v131771/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...71/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...l/BLA-L29_hw_eu/update_full_BLA-L29_hw_eu.zip
http://update.hicloud.com:8180/TDS/...l/BLA-L09_hw_eu/update_full_BLA-L09_hw_eu.zip
Changelog:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1881/g1750/v131771/f1/full/changelog.xml
I used HWOTA8 for it and it went successfull and then the phone turned off and after it got off my phone got stuck in black screen no matter what I do
When I connect my phone to the PC a sound of a USB being connected occur but no USB information and no ADB or fastboot access
A similar thing happened to me during my rebrand and update. Let me ask you, when you plug your phone into your computer and go to device manager, what do you see?
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
A similar thing happened to me during my rebrand and update. Let me ask you, when you plug your phone into your computer and go to device manager, what do you see?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
USB SER
CodeRida said:
USB SER
Click to expand...
Click to collapse
That's not good, whosoever. I used DC Pheonix to try and fix it. I'll try to save you some time and money, but unfortunately I believe your device is bricked like mine. Currently there isn't a fix for it either
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
That's not good, whosoever. I used DC Pheonix to try and fix it. I'll try to save you some time and money, but unfortunately I believe your device is bricked like mine. Currently there isn't a fix for it either
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Wow that is really bad I was actually considering DC Pheonix and Funky Huawei, but I guess thats a no too. The problem is it was a gifted phone so I don't know where its bought from, but I will try and guess and get it to some shops I expect and lets hope they would fix it on the warranty, if not I will try to fix it by buying a board at one of the shops. I hope you can get yours fixed by the warranty too.
CodeRida said:
Wow that is really bad I was actually considering DC Pheonix and Funky Huawei, but I guess thats a no too. The problem is it was a gifted phone so I don't know where its bought from, but I will try and guess and get it to some shops I expect and lets hope they would fix it on the warranty, if not I will try to fix it by buying a board at one of the shops. I hope you can get yours fixed by the warranty too.
Click to expand...
Click to collapse
Unfortunately I am in the states, and I didn't have. warranty so I am up the creek
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
Unfortunately I am in the states, and I didn't have. warranty so I am up the creek
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Try what I Pm'd you with Huawei branch
CodeRida said:
Try what I Pm'd you with Huawei branch
Click to expand...
Click to collapse
I only have one message from you. Could you send it again?
I am suffering from the same, my phone bricked on 17th April and till now no solution. Its a 6 month old phone (from its launch) but there is no solution from Dc Phoenix to fix the phone in Huawei USB SER ( Huawei USB COM 1.0 ) called Factory mode to fix writing Board Software. They have Board Software but their tool is not updated to deal with Mate 10 Series. I have posted in Dc Phoenix to fix and update their tool. All of you are requested to post here too to force them for a solution.
k4fari said:
I am suffering from the same, my phone bricked on 17th April and till now no solution. Its a 6 month old phone (from its launch) but there is no solution from Dc Phoenix to fix the phone in Huawei USB SER ( Huawei USB COM 1.0 ) called Factory mode to fix writing Board Software. They have Board Software but their tool is not updated to deal with Mate 10 Series. I have posted in Dc Phoenix to fix and update their tool. All of you are requested to post here too to force them for a solution.
Click to expand...
Click to collapse
If you don't mind us asking, what were you doing when you bricked your phone?
royhanks3 said:
If you don't mind us asking, what were you doing when you bricked your phone?
Click to expand...
Click to collapse
I think you have not checked the link which i have shared? I was updating the firmware and phone rebooted and stuck in factory mode as usb ser ( USB COM 1.0 ) with no display, no fastboot and no recovery.
k4fari said:
I think you have not checked the link which i have shared? I was updating the firmware and phone rebooted and stuck in factory mode as usb ser ( USB COM 1.0 ) with no display, no fastboot and no recovery.
Click to expand...
Click to collapse
I should've been more specific. What update were you downloading?
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
I should've been more specific. What update were you downloading?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Updating from 132 to 134, the details are posted in DC Phoenix and the link is already provided in my 1st comment in this thread, please have a look.
k4fari said:
Updating from 132 to 134, the details are posted in DC Phoenix and the link is already provided in my 1st comment in this thread, please have a look.
Click to expand...
Click to collapse
Those details aren't in the first post of the link you posted (what update you were trying to flash and what rom you previously had on your device), I think you're mistaken. Regardless, your post is what actually led me here and I was able to pinpoint that something is horribly wrong with the 134 update. Every post from the last week regarding the 134 update has about their device being bricked after trying to flash the update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
A similar thing happened to me during my rebrand and update. Let me ask you, when you plug your phone into your computer and go to device manager, what do you see?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Same deal with me bricked after updating to b134. picks up it as usb ser. installed the correct drivers but dc phoenix cant write to it as it comes up incomplete. Cant charge can't do anything except a black screen
trd_jzx100 said:
Same deal with me bricked after updating to b134. picks up it as usb ser. installed the correct drivers but dc phoenix cant write to it as it comes up incomplete. Cant charge can't do anything except a black screen
Click to expand...
Click to collapse
It sounds like it's hard bricked. Dammit, I wonder what the hell they did with this update?
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
If you don't mind us asking, what were you doing when you bricked your phone?
Click to expand...
Click to collapse
I was trying to rebrand it and install B141 from the links above which seems to be broken
EDIT: sorry I thought you were asking me
I have found this driver that changed the "USB SER" from being "unknown device" or "other devices" to "Huawei USB COM 1.0" under "Ports (COM &LPT)"
https://doc-0o-74-docs.googleuserco...2595432&hash=fjttibiur8ah5d90gbkvm8oo6k1k40sk
I don't know if this actually helps, but at least it knows something about the device which make it seem better I guess
I'm in this boat too. Have the ALP-L29C636. Was running 132 and tried to update to 134. Explained further in MankindTW's thread here: https://forum.xda-developers.com/showpost.php?p=76381422&postcount=859
royhanks3 said:
Those details aren't in the first post of the link you posted (what update you were trying to flash and what rom you previously had on your device), I think you're mistaken. Regardless, your post is what actually led me here and I was able to pinpoint that something is horribly wrong with the 134 update. Every post from the last week regarding the 134 update has about their device being bricked after trying to flash the update. View attachment 4489322
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
I admit that there are no details of the version, i was on ALP-L29C636B132 and i used HOWTA8 to update with ALP-L29C636B134 and got USB SER. I might believe that there is some thing wrong in B134.
---------- Post added at 02:14 PM ---------- Previous post was at 02:11 PM ----------
CodeRida said:
I have found this driver that changed the "USB SER" from being "unknown device" or "other devices" to "Huawei USB COM 1.0" under "Ports (COM &LPT)"
https://doc-0o-74-docs.googleuserco...2595432&hash=fjttibiur8ah5d90gbkvm8oo6k1k40sk
I don't know if this actually helps, but at least it knows something about the device which make it seem better I guess
Click to expand...
Click to collapse
Agree with you, but there is no tool or service that can work with Mate 10 Series in this mode. I have bought 1 year subscription of DC Phoenix but i am unable to flash the Board software to my Mate 10
I have Flashed I4213 Android 10 rom into my I4293 device and this what happened.
Many of you may know that the fact Sony recently released Android 10 official firmware (53.1.A.2.2) for both Xperia 10 and 10 plus. but not all of the devices. I've been using Xperia 10 Plus I4293 Hong Kong variant for few months now. Even though official firmware released my device still haven't got the new update. Last night I've done a little bit experiment. I've downloaded 53.1.A.2.2 (Customized South Africa) firmware from XperiFirm and then done few changes inside the firmware folder. then using Androxyde flashtool created a new bundle for my Xperia 10 Plus I4293. I've renamed it Customized AU - 53.1.A.2.2. To this point I had no idea what's gonna happen next. But I still wanted to flashed it to my device and try it out. And guess what, it's actually worked. As I said before I've used South African firmware for my device. But after I put my sim card it's automatically detected as Australia. Surprisingly there's no country lock in that firmware. But in settings phone model shown as I4213 instead of I4293. Because after I flashed I4213 firmware into my device it's automatically converted it's model number. But as I know I4213 is the 4GB ram variant of the Xperia 10 plus. But in android system it's detect the 6GB ram. And the great thing is all the original Sony apps seems working perfectly, including Album, Camera pretty much everything.
And there was a common screen freeze or non responsive bug in these devices before. And now it's all gone. From my experience so far touch screen and touch responsive much better than before. Even the finger print sensor. seems like they actually fixed the previous bug with this update. I think that's a huge improvement for all these devices. I really want to flash actual Hong Kong version of the firmware to my device. but after couple weeks releasing the firmware for only for few regions, Sony still failing to provide the update for all the models of the same device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[update:25/05/20 Actually the screen freeze issue still not completely gone. I'm still experiencing some of those issues as before as well as occupational ghost touches. But it's a really few amount compared to Android 9. I have no idea what causes that problem. I've even flashed LineageOS before. And yet problem arrived after few days.]
How to do it:
1. Download the I4213 - 53.1.A.2.2 firmware using the Flashtool by Androxye.
2. And also, add this flash script into the firmware folder before you create the bundle.
3. And then close the XperiFirm and click tools-->bundles-->create.
4. On that window, select the downloaded firmware folder, then select the device model you wanted to flash. So you need to select Xperia 10 (I4293) not I4213. [even though you've downloaded I4293 firmware you need to select I4293. Because we're flashing a I4293 device.]
5. On the branding and version tabs just type anything you want. And then select all the firmware files in folder list and click [->] button to add all those files to firmware content section. And click create button. I'll take some time to create the bundle.
6. And then click flash device icon and select flashmode option. you could see your firmware file on flashmode section, under I4293 . And That's pretty much it. And then you can flash the firmware into your device.
*Please be aware the fact that, after flashing this firmware into your device. It'll automatically convert into a I4213 device. But the android software will detect your 6GB ram without any problem. even the IMEI doesn't change. everything will be fine.
** And if Sony releases the firmware for I4293, you can flash those firmware file into your device and convert back to the original model number. And for that just follow the same steps. But for that you need to download I4293 firmware and create a bundle for I4213 and flash it to your device.
***And also as always, please make some backups before doing this.
------------------------------------------------------------------------------------
[update:07/06/20 It's about a month Sony first released their 53.1.A.2.2 firmware for Xperia 10 plus 4GB ram [I4213] version. They included March 2020 android security patch even though, now it's few months older. When you check the security settings on your device you can see it's already outdated. And the irony is I4293 model still haven't got single android 10 update yet. And their security patch already outdated. Honestly Sony has the worst update delivery system ever. But luckily in Android 10 we can install more updated play store security patch.
Someone received the official update on reddit and complained that he can not hear through the earpiece after the update to android 10,only through speaker during a call. Can you confirm that you can make and receive calls?
mathiosn said:
Someone received the official update on reddit and complained that he can not hear through the earpiece after the update to android 10,only through speaker during a call. Can you confirm that you can make and receive calls?
Click to expand...
Click to collapse
No. everything working for me. even ear proximity sensor works just fine. And I just found out that Sony released I4293 China version of the firmware. It's called Customized CN (53.1.A.3.8)
Hi. Me too i want to flash android 10 but still no update for my xperia 10 i4193 hk. I already flashed tw taiwan firmware as it is more updated but still no android 10 update. Im thinking of trying what you did with your 10 plus. But you said on your post you change something in the firmware? Can you confirm that? Is that something like porting the firmware from different region to your i4293? And by the just now there is an update for your device but for china region i4293. The build number is quite different 53.1.a.3.8.
solismartin96 said:
Hi. Me too i want to flash android 10 but still no update for my xperia 10 i4193 hk. I already flashed tw taiwan firmware as it is more updated but still no android 10 update. Im thinking of trying what you did with your 10 plus. But you said on your post you change something in the firmware? Can you confirm that? Is that something like porting the firmware from different region to your i4293? And by the just now there is an update for your device but for china region i4293. The build number is quite different 53.1.a.3.8.
Click to expand...
Click to collapse
I can actually provide you the firmware file I've used to flash. And yes, right now there's 53.1.A.3.8 Which is indeed Chinese market version. We can actually flash that to our device without doing any changes because model number is the same. I'm actually thinking about re-flashing 53.1.A.3.8 version into my device. But I'm still wondering what's different between 53.1.A.3.8 and 53.1.A.2.2.
XOBOT.V2 said:
I can actually provide you the firmware file I've used to flash. And yes, right now there's 53.1.A.3.8 Which is indeed Chinese market version. We can actually flash that to our device without doing any changes because model number is the same. I'm actually thinking about re-flashing 53.1.A.3.8 version into my device. But I'm still wondering what's different between 53.1.A.3.8 and 53.1.A.2.2.
Click to expand...
Click to collapse
yes im also wondering whats the difference. I tried googling but didn't find anything. However for my xperia 10, not 10 plus. I4193 doesnt have china only hk and tw. And still nothing even the 53.1.a.3.8
---------- Post added at 04:57 AM ---------- Previous post was at 04:17 AM ----------
XOBOT.V2 said:
I can actually provide you the firmware file I've used to flash. And yes, right now there's 53.1.A.3.8 Which is indeed Chinese market version. We can actually flash that to our device without doing any changes because model number is the same. I'm actually thinking about re-flashing 53.1.A.3.8 version into my device. But I'm still wondering what's different between 53.1.A.3.8 and 53.1.A.2.2.
Click to expand...
Click to collapse
can you walk me through with the process. I believe its customized za right but in my case it'll be for i4113 to my i4193. What are the tools needed and the instructions. I might flash it if i can no longer wait for hk or tw update. TIA.
solismartin96 said:
yes im also wondering whats the difference. I tried googling but didn't find anything. However for my xperia 10, not 10 plus. I4193 doesnt have china only hk and tw. And still nothing even the 53.1.a.3.8
---------- Post added at 04:57 AM ---------- Previous post was at 04:17 AM ----------
can you walk me through with the process. I believe its customized za right but in my case it'll be for i4113 to my i4193. What are the tools needed and the instructions. I might flash it if i can no longer wait for hk or tw update. TIA.
Click to expand...
Click to collapse
You don't have to change pretty much anything. Just download the firmware using the Flashtool by Androxye. In your case I4113 South African firmware. And then click tools-->bundles-->create. On that window, select the downloaded firmware folder, then select the device model you wanted to flash. So you need to select Xperia 10 (I4193) not I4113. On the branding and version tabs just type anything you want. And then select all the firmware files in folder list and click [->] button. And finally click create button. And then you could see your firmware file on flashmode section. And don't forget to add a flash script into the firmware folder before you create the bundle. That's pretty much it. And then you can flash the firmware into your device.
And also I've found about the 53.1.A.3.8 firmware. Just don't worry about it. It's also Android 10 without google services for china region. They using baidu network instead of google. There's no single google app in that firmware.
XOBOT.V2 said:
You don't have to change pretty much anything. Just download the firmware using the Flashtool by Androxye. In your case I4113 South African firmware. And then click tools-->bundles-->create. On that window, select the downloaded firmware folder, then select the device model you wanted to flash. So you need to select Xperia 10 (I4193) not I4113. On the branding and version tabs just type anything you want. And then select all the firmware files in folder list and click [->] button. And finally click create button. And then you could see your firmware file on flashmode section. And don't forget to add a flash script into the firmware folder before you create the bundle. That's pretty much it. And then you can flash the firmware into your device.
Click to expand...
Click to collapse
nice thank you! I dont know how to add a flash script can you also help me with that. This is flashing through PC right? If still no update I'll do it on weekend.
solismartin96 said:
nice thank you! I dont know how to add a flash script can you also help me with that. This is flashing through PC right? If still no update I'll do it on weekend.
Click to expand...
Click to collapse
Yeah I just checked still nothing. Use this View attachment 53.0.zip flash script. It'll work. just extract the extract the 53.0.fsc file and copy it to your downloaded firmware file before you create a bundle. And yes, this flashing with the PC.
XOBOT.V2 said:
Yeah I just checked still nothing. Use this View attachment 5023353 flash script. It'll work. just extract the extract the 53.0.fsc file and copy it to your downloaded firmware file before you create a bundle. And yes, this flashing with the PC.
Click to expand...
Click to collapse
it worked! I was able to flash android 10 53.1.a.2.2 of i4113 to my i4193 and it works fine. Thanks for your help. I would say this should have its own thread on xperia 10 thanks again!
Yeah no worries, man. If you wanna post a thread about it on Xperia 10 section just go ahead.
Hello, I also use I4293(CDA 1318-2077)
If flash to I4213(53.1.A.2.2), what file do I need to change?
Akizora980 said:
Hello, I also use I4293(CDA 1318-2077)
If flash to I4213(53.1.A.2.2), what file do I need to change?
Click to expand...
Click to collapse
Hey, I just added a step by step guide in to the original post. just refer it.
XOBOT.V2 said:
Hey, I just added a step by step guide in to the original post. just refer it.
Click to expand...
Click to collapse
thank you very much :fingers-crossed:
ありがサンキュー
Akizora980 said:
thank you very much :fingers-crossed:
ありがサンキュー
Click to expand...
Click to collapse
Yeah no worries, glad to help.
Ram Usage
Hello,there
Nicely done on flashing another rom to your phone! I've done this with newflasher (not recommended btw).
Can I ask, did you actually get to unlock 2G of Ram(like some PC Graphics cards with bios mods) or is it just written there because of the model?
Thanks!
XOBOT.V2 said:
Yeah no worries, glad to help.
Click to expand...
Click to collapse
I used newflasher keep the user data flashing
she very good
Akizora980 said:
I used newflasher keep the user data flashing
she very good
Click to expand...
Click to collapse
Awesome. have you got any issues after flashing?
JohnKaraz said:
Hello,there
Nicely done on flashing another rom to your phone! I've done this with newflasher (not recommended btw).
Can I ask, did you actually get to unlock 2G of Ram(like some PC Graphics cards with bios mods) or is it just written there because of the model?
Thanks!
Click to expand...
Click to collapse
Are you crazy? how that even possible in mobile phones? It's obviously because of the phone model. my device is I4293 HK 6GB ram version. that's why. my point is even though you've flashed different model, software recognize the full ram capacity.