First of all.. hello
Today I installed the dpichanger app from google store. I changed the the dpi and it asked for a restart. After restart its stuck at the yellow triangle. At first I did the following:
Wipe data/Factory reset
Wipe batt stats
Wipe dalvik cache
No luck what so ever. Then I thought I bricked it and decided to install RootBox JB on the device. I did a format system and all the above steps. Status 7 again.
What ca I do?
I was running the stock leaked ICS I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship (GT-I9100-MULTI-CSC-OXALQ5.tar and MODEM_I9100XXLQ5_REV_02_CL1165929.tar too).
CWM is 5.5.0.4. What should I do?
I can't reinstall the images though Odin.... how should I proceed to get my phone back functioning? Is my device bricked....?
adi003 said:
First of all.. hello
Today I installed the dpichanger app from google store. I changed the the dpi and it asked for a restart. After restart its stuck at the yellow triangle. At first I did the following:
Wipe data/Factory reset
Wipe batt stats
Wipe dalvik cache
No luck what so ever. Then I thought I bricked it and decided to install RootBox JB on the device. I did a format system and all the above steps. Status 7 again.
What ca I do?
I was running the stock leaked ICS I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship (GT-I9100-MULTI-CSC-OXALQ5.tar and MODEM_I9100XXLQ5_REV_02_CL1165929.tar too).
CWM is 5.5.0.4. What should I do?
I can't reinstall the images though Odin.... how should I proceed to get my phone back functioning? Is my device bricked....?
Click to expand...
Click to collapse
Can you not boot into download mode or CWM at all?
ChrisRHolstein said:
Can you not boot into download mode or CWM at all?
Click to expand...
Click to collapse
yes i can
Try another ZIP
Related
Hello guys,
Just got my new I9100 yesterday.
Phone Specs:
PDA: I9100XWKL1
Phone : I9100DDKL1
CSC: I9100DDKL1
I flashed CF Root I9100XWKL1 and rooted my phone. Later I downloaded official MIUI and flashed it via CWM Recovery. Wiped cache and Dalvik cache. Now the phone is stuck at MI logo. I just hear the galaxy sII startup tone and the phone shows logo and does not moves ahead. What to do now guys? Have I went somewhere wrong?? Guide me
Try reflashing the rom without any wipe.
Or boot into recovery if you can & do a wipe/factory reset.
m2smoe said:
Try reflashing the rom without any wipe.
Click to expand...
Click to collapse
I tried reflashing still stuck at logo.
MistahBungle said:
Or boot into recovery if you can & do a wipe/factory reset.
Click to expand...
Click to collapse
Done. Booted now after factory reset Thanks
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
0semaj0 said:
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
Click to expand...
Click to collapse
Hmmm that's not very strange. Also I was considering that first boot will take time as dalvik cache is prepared and then system gets running. But the wait time was abnormal in first case.
Sent from my GT-I9100 using Tapatalk
I did everything I was supposed to do, first succesfully rooted the phone. Then I put the zip file with the rom into the sd card and then went into recovery mode, installed file from zip and it said success in install so I chose to reobot and now it hangs there... Any one can help me out? I'm scared...
badaboom423 said:
I did everything I was supposed to do, first succesfully rooted the phone. Then I put the zip file with the rom into the sd card and then went into recovery mode, installed file from zip and it said success in install so I chose to reobot and now it hangs there... Any one can help me out? I'm scared...
Click to expand...
Click to collapse
A bit more details. What phone model? What were you trying to flash? Where does it hang, on the Samsung boot animation, or in the recovery?
Sent from my GT-I9100 using Tapatalk 2
Galaxy s2 international (gt 19100). It hangs on the boot logo, which now is a yin yang with ics on it, I guess this is a NEAT thing. I can go into recovery mode, it just hangs if I try to boot normally.
badaboom423 said:
Galaxy s2 international (gt 19100). It hangs on the boot logo, which now is a yin yang with ics on it, I guess this is a NEAT thing. I can go into recovery mode, it just hangs if I try to boot normally.
Click to expand...
Click to collapse
The yin yang boot logo is actually the kernel. (Siyah)
You should probably try a factory reset/wipe data from recovery. This will alleviate 90% of boot loops and stuck on boot issues.
How do I do that?
badaboom423 said:
How do I do that?
Click to expand...
Click to collapse
You just said above you can boot to recovery... Once you are in recovery mode, can you not follow the recovery menu system to find the wipe data/factory reset option? It should be pretty straightforward.
I'm not running Siyah, so I don't know what the exact menu item is called in the recovery image that is in that kernel.
I tried that but it still does the same thing... any other tips?
badaboom423 said:
I tried that but it still does the same thing... any other tips?
Click to expand...
Click to collapse
Actually, let's take a couple steps back.
What model phone do you have? It's printed on the label under your battery.
it says model GT-i9100
ssn i9100GSMH
badaboom423 said:
it says model GT-i9100
ssn i9100GSMH
Click to expand...
Click to collapse
Ok. Are you SURE you're doing a wipe data/factory reset when in recovery? If so, then I'd flash a stock firmware, full wipe again, then try the Neat ROM install again.
ctomgee said:
Ok. Are you SURE you're doing a wipe data/factory reset when in recovery? If so, then I'd flash a stock firmware, full wipe again, then try the Neat ROM install again.
Click to expand...
Click to collapse
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
What recovery u using ? CWM ?
Sent from my GT-I9100 using xda app-developers app
CWMR Touch v5.5.0.4
badaboom423 said:
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
Click to expand...
Click to collapse
Find all you need to know here.
As an easy rule before installing any new ROM (that isn't an upgrade from a previous version ex. Cm10 builds or if otherwise stated ) wipe data , cache and dalvik cache , which is under advanced
badaboom423 said:
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
Click to expand...
Click to collapse
Try
Go to recovery
wipe data
wipe cache
advanced/wipe dalvik cache
go back
mounts and storage
format system
format data
format cache
go back
install rom
Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.
Hi,
CF rooted today and cheked out supernexus but decided to revert back to my backup (official 4.1). I booted into recovery and did a full wipe, and restored the backup. Upon reboot the boot seems to be stuck at the SAMSUNG logo - it still glows but nothing happens. It's been like this for 10 min. or so!
Would a stock rom Odin flash do the trick or am I screwed...
HoundDK said:
Hi,
CF rooted today and cheked out supernexus but decided to revert back to my backup (official 4.1). I booted into recovery and did a full wipe, and restored the backup. Upon reboot the boot seems to be stuck at the SAMSUNG logo - it still glows but nothing happens. It's been like this for 10 min. or so!
Would a stock rom Odin flash do the trick or am I screwed...
Click to expand...
Click to collapse
wipe cache and dalvik in recovery and reboot
mikep99 said:
wipe cache and dalvik in recovery and reboot
Click to expand...
Click to collapse
I wiped data/factory reset, cache and dalvik the first time around. Tried wiping cache and dalvik again at no avail. :crying:
have you got any other ROMs on your SDCARD you could flash through recovery?
HoundDK said:
Hi,
CF rooted today and cheked out supernexus but decided to revert back to my backup (official 4.1). I booted into recovery and did a full wipe, and restored the backup. Upon reboot the boot seems to be stuck at the SAMSUNG logo - it still glows but nothing happens. It's been like this for 10 min. or so!
Would a stock rom Odin flash do the trick or am I screwed...
Click to expand...
Click to collapse
Hi you are stuck on bootloop
you can flash another firmware to sort this out go to sammobile.com and download a firmware there.. but you have to have an account there so if you don't have one yet, you can register there for free also, after you have downloaded the firmware, use PDA in odin to flash..
i hope this helps cheers!
Thanks guys
Luckily I still had the supernexus rom on my internal sdcard, so I was able to flash that with success. Guess my inital ROM backup was corrupted!
I'm sure the sammobile solution will come in handy next time!
Hi Guys
Im having some problems trying to install a custom rom into my new Galaxy SIII I9300.
The rom in question is OmegaRom V35
After roooting and all, yesterday i tryed installing the rom with mobile odin, following all the instructions.
The result was the phone rebooted after the instalation seemed to be ok, but got stuck on the booting animation, and never got out of there.
I Had then to inject cwm with odin desktop, wiped data, cache anda dalvik, and then proceed to install the stock rom with desktop odin. All went well and the phone worked great.
I thought that maybe the problem was with mobile odin pro. So today, i went and proceeded to install Omega V35 via CWM. I again put the file on internal sd card, wiped data, cache and dalvik, and the rom started flashing. It all started good but, with no warning, at the mniddle of the installation, when applications were being installed, the phone went automatically and wuickly back to CWM!
Of course the installation wasnt finished, so i was stuck with cwm on reboot. Again made wipe data, cache and Dalvik, tried again to flash Omega V35, and again, the same problem...
In the end, i had to flash the stock rom again.
I searched the forum, but i cant seem to find the problem for this. I followed all the instructions, and had no error messages besides CWM skiping the format of the card, and some message (that i've seen in videos as normal), when wiping Dalvik!
Any clue to what's happening?
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)</b>
JJEgan said:
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)</b>
Click to expand...
Click to collapse
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
rebentador said:
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
Click to expand...
Click to collapse
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
THE.W!ZARD said:
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
Click to expand...
Click to collapse
I had already checked the md5, and the file is ok...
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Amritttt said:
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
None whatsoever. The flashing process seems to be running ok, It starts, i select default instalation, after i can see the apps being installed and suddenly, it all stops and goes into cwm without any message or warning...