[Q] firmware for A13b ( A13_nuclear_pfdq88c-eng-IMM76D) - Android Q&A, Help & Troubleshooting

Pls help.... need img rom for this build id....
My tablet is brick....
no back up rom..
just install set cpu for changing governor cpu speed, then cant reboot at all...
try install around 20 img rom for A13, bad luck ...
many rom touch screen no work and some stuck at green android boot..
pls help...

Anyone have link?

roms
kakho55 said:
Anyone have link?
Click to expand...
Click to collapse
I've the same problem with my tablet and I tried some roms.
I'm searching the best one and I download from here:
inside4ndroid.moonfruit.com/#/a13-ab-downloads/457079
I hope you will be succesful.
Buy, Laszlo

kakho55 said:
Pls help.... need img rom for this build id....
My tablet is brick....
no back up rom..
just install set cpu for changing governor cpu speed, then cant reboot at all...
try install around 20 img rom for A13, bad luck ...
many rom touch screen no work and some stuck at green android boot..
pls help...
Click to expand...
Click to collapse
I've tried the TRAGiC-A13-DEC2012-404-ICS its touchscreen is working but in opposite direction!! but u can get used to it...i dont know how to change its ts driver!!! just seach it on the forum maybe you can find the file i cant upload it its to large i have a bad connection!!

gelo20ify said:
I've tried the TRAGiC-A13-DEC2012-404-ICS its touchscreen is working but in opposite direction!! but u can get used to it...i dont know how to change its ts driver!!! just seach it on the forum maybe you can find the file i cant upload it its to large i have a bad connection!!
Click to expand...
Click to collapse
i use this firmware flash it using phoenix burning tool Q88B-中性英文-4G-6225翰彩-带视频20120917-blue stick.img
only wifi dont work and the back camera...

Related

[Q] 2.2 problems

hello everyone..
i jus installed x recovery and copied the FreeX10-beta1.zip on the sd card after downloading it frm this thread http://forum.xda-developers.com/showthread.php?t=900441
i managed to install it but its not working properly.. i installed the hot fixes for it too but there wifi is not working and there is no network service... and the screen flashes aftr few seconds..
i dnt knw wat to do.. please help me as soon as possible..
thanks
and one more thing the screen is automatically responding as if its being touched.... though im not touching it... i hope u get what im trying to say!
help please
momerbk said:
hello everyone..
i jus installed x recovery and copied the FreeX10-beta1.zip on the sd card after downloading it frm this thread http://forum.xda-developers.com/showthread.php?t=900441
i managed to install it but its not working properly.. i installed the hot fixes for it too but there wifi is not working and there is no network service... and the screen flashes aftr few seconds..
i dnt knw wat to do.. please help me as soon as possible..
thanks
Click to expand...
Click to collapse
If I am not mistaken, this ROM is still a beta version. So these bugs are to be expected. You can post on the thread and the OP should respond to you.
batman_112 said:
If I am not mistaken, this ROM is still a beta version. So these bugs are to be expected. You can post on the thread and the OP should respond to you.
Click to expand...
Click to collapse
but everyone else's wifi and network service is working why isnt mine? :/
momerbk said:
but everyone else's wifi and network service is working why isnt mine? :/
Click to expand...
Click to collapse
Like said, follow the instructions on the thread as to how to report bugs. Hopefully, they can help you out.
see the rom may not be for usage purpose doing it was not at all a good idea .u can try using se pc suite and enter the firmware upgrade mode then connect to the p and then automatically the pc suite will regonise your device and will downgrade to 2.1 which would be functional .
it happened with me too
this has been discussed over and over and over and over again...
you have to open adb shell and then killall servicemanager
oh and by the way. dispite It´s costum rom it work almost perfectly, except the camera part of course.

[Q] CyanogenMod for MAPAN MX913 OR JXD S9100

I am trying to understand if there is a CyanogenMod for JXD S9100 OR MaPan MX913. AND If yes what is the way to apply it to the tablet
thanks
xgeek.cub said:
I am trying to understand if there is a CyanogenMod for JXD S9100 OR MaPan MX913. AND If yes what is the way to apply it to the tablet
thanks
Click to expand...
Click to collapse
hi, i made a custom CWM Recovery for the MAPAN MX913 DC
http://jenkins.cyanogenmod.com/job/recovery/29329/
maybe the first step for you to install other roms...
Hello sir,
Thanks a lot. I most applogize because I was away on a trip and I didn't get your massage till now.
I am very happy that I cut my work load in half.
But I checked your link and it seems out of order and doesn't work
Would you please share it somewhere and give my the link
Very much thanks
Really thanks
xgeek.cub said:
Hello sir,
Thanks a lot. I most applogize because I was away on a trip and I didn't get your massage till now.
I am very happy that I cut my work load in half.
But I checked your link and it seems out of order and doesn't work
Would you please share it somewhere and give my the link
Very much thanks
Really thanks
Click to expand...
Click to collapse
Here is the recovery .img of my Device, if it dont work, you can contact me
http://rapidshare.com/files/2203030195/recovery.img
Important: it overwrite the recovery partition of original the ROM. and backup works for all partitions exept the recovery itself. but that shouldn't be a problem. if you get problems with the CWM u can simply flash back the original ROM without problems
hello again and thanks
About how to apply the .img file? with Livesuit?
xgeek.cub said:
hello again and thanks
About how to apply the .img file? with Livesuit?
Click to expand...
Click to collapse
ive installed it with SausageScript but that bases on the Livesuit. I think try it with Livesuit first. if it dont work i can send you the SW and a guide to install it with it...
For all who needs Sausage Script

[Need help] Install wrong rom and choose wrong device, too! My touch is dead!

Im using sk17i, rooted, unlocked bootloader!
Today i installed wrong rom cook: HD ultimate 2.0.3 at here. When install it, i choose Xperia Pro :crying::crying::crying::crying::crying:
And my touch phone isnt work anymore!
I try few way find from our forum (ex: flash few different rom and kernel,... ) but cant fix it!
:crying::crying::crying:PLEASE HELP ME :crying::crying:
Use Sony Xperia SEUS tout reset your phone to stock rom then flash again.
Envoye depuis mon Galaxy Note II
I think it won't work.
Try this: http://forum.xda-developers.com/showthread.php?t=2068819
I want to know one thing,why you tried to install rom from Ray subforum,that's for Ray/Pro and some other HDPI devices?
You just decided to brick your device...
Yarman2000 said:
I think it won't work.
Try this: http://forum.xda-developers.com/showthread.php?t=2068819
I want to know one thing,why you tried to install rom from Ray subforum,that's for Ray/Pro and some other HDPI devices?
You just decided to brick your device...
Click to expand...
Click to collapse
Sorry, i dont want that. I want flash Ultimate HD 2.0.2 but i see 2.0.3 and i throught its an update version.
So i download and dont read anything :crying::crying::crying::crying:
I try follow that topic but it isnt work with me, only work with ST15.
Have anyone help me? Please!!!!!!!!!!
I through i lost driver of touch screen. So my touch stop working.
r.i.p the poor thing...
an0nym0us_ said:
r.i.p the poor thing...
Click to expand...
Click to collapse
LOL thanks u..... :good::good::good::good:
I think that's the way from my link should work also on Mini Pro.
Try it,but just use files for your device.
You can try,maybe it will work.
Yarman2000 said:
I think that's the way from my link should work also on Mini Pro.
Try it,but just use files for your device.
You can try,maybe it will work.
Click to expand...
Click to collapse
i tried but it didnt work, my friend!
you can factory reset and boot into recovery and reflash Ultimate rom
ps. I use ultimate rom too
Sent from my ST18i using Tapatalk 2
n_tienloi said:
Im using sk17i, rooted, unlocked bootloader!
Today i installed wrong rom cook: HD ultimate 2.0.3 at here. When install it, i choose Xperia Pro :crying::crying::crying::crying::crying:
And my touch phone isnt work anymore!
I try few way find from our forum (ex: flash few different rom and kernel,... ) but cant fix it!
:crying::crying::crying:PLEASE HELP ME :crying::crying:
Click to expand...
Click to collapse
ei! We're exactly in the same situation and I am yet to find the solution to our problem. I have tried so many suggested fix in this forum (mostly for xperia mini) but nothing works, Maybe because they are not exactly in the same situation as us.
Hope some hardcore dev help us.. hehe:silly:
Have you tried flashing stock active rom, boot that and flash the rom for your device again? There was a guy who reported this would work
Sent from my Nexus 7 running Android 4.2.1

MICROMAX A101 bricked

rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Flash the stock firmware
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flash the stock firmware
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
how could you explain??
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
know that
but how to do flashing????
could u xplain me the steps
thank u
Flashing a firmware is different with every model of phone,try to search in google and flash the micromax's stock rom
Sent from my LG-P880 using xda premium
Found any solution to this?
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Egg Yolk said:
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Click to expand...
Click to collapse
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Any luck with your A101
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
Hi bishu any luck with your A101
Correct me if I am wrong but you started facing issues after you flashed the JB rom
Also I dont see anywhere the rom you flashed was meant for A101.
you can try this for firmware
http://forum.gsmhosting.com/vbb/f81...all-flash-file-only-here-mega-thread-1624105/
let me know if it works else I will take a back up of my ROM and upload :good:
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
thanks
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
hi thanks is0l4ted
thanks for detailed help
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Owh really did they?? I wonder with Doubt as MTK Devices are Un-Brickable btw..
hossori was
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Like I tried all these different ROMs on xperia x10 mini pro u20i, upgraded it to JB 4.1.2, and its working fine, and all these were possible because of Sony's PC Companion that helped me to get my phone out of boot loops an all, now since I don't have that kinda apps for Micromax's A101 (not even in there official site) is there any other way where I can bring the fone back to its factory settings if anything goes wrong while custom rom installation or upgradation from ICS 4.0.4 to JB 4.2 or 4.3. (I already have those drivers and tools for A101 that was there mentioned though.However I never got those driver files in the phone when I bought it though)
If yes please let me know bout a- the best kernel for A101
b- JB 4.2 or 4.3 (preferably) ROM plus and GAPPS required
c- The stock kernel or some application like Sony has update service app for sony phones(u knw just in case..)
Thanks a lot to all of you guys and to the forum, I never thought my xperia mnini pro can run JB before, I started likeing my fon again and its all because of you guys.
How to root micromax A101
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
crptox31 said:
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
Click to expand...
Click to collapse
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Thanks
Bishumoharana said:
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Click to expand...
Click to collapse
Thanks Man!!
crptox31 said:
Thanks Man!!
Click to expand...
Click to collapse
did it worked??
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Believe me! Nothing is wrong with your device! Just flash the stock ROM back and that's it...
Kitkat Rom for micromax
I have finally rooted my phone and i can't find kitkat rom for micromax a101.
One website says it has the rom
but when try downloading it, the website asks to complete the survey
after completing the survey nothing happens and no file is downloaded.
If anyone has the kitkat rom please upload it on media fire. I urgently need it.
:silly:

Need help. Firmware for Venstar 2050

Hello all.
Yesterday my venstar 2050 stuck at android logo. Then i search internet and flashed rom for very same device specification
It works but the touchscreen bluetooth and wifi isn't functioning. Not to mention the display became very weird.
So, does anyone have firmware for this tablet?
I really need it, please.
Or if someone have the tablet fully working. I want the ROM backup
Thx in advance
Hello friend.
I have the same tablet, here are the stock imgs:
Boot, Kernel and Recovery:
dl.dropboxusercontent.com/u/637058/imgs.zip
System:
drive.google.com/file/d/0B-10NeNVZzIhV2tFN1V1T3BTQkk/edit?usp=sharing
samigina said:
Hello friend.
I have the same tablet, here are the stock imgs:
Boot, Kernel and Recovery:
dl.dropboxusercontent.com/u/637058/imgs.zip
System:
drive.google.com/file/d/0B-10NeNVZzIhV2tFN1V1T3BTQkk/edit?usp=sharing
Click to expand...
Click to collapse
Thx a lot bro
I flashed it, but the parameter file is incorrect
I only have 2GB of internal SD. Could you share the parameter file?
AnthonyJohan94 said:
Thx a lot bro
I flashed it, but the parameter file is incorrect
I only have 2GB of internal SD. Could you share the parameter file?
Click to expand...
Click to collapse
Mine have 4gb, so I guess it will not work in yours. Im at the office right now, when I get to home this night I will searhc the tablet for the file.
Maybe you can edit the file to fit your system?
samigina said:
Mine have 4gb, so I guess it will not work in yours. Im at the office right now, when I get to home this night I will searhc the tablet for the file.
Maybe you can edit the file to fit your system?
Click to expand...
Click to collapse
ok. Could yu share it? I want to compare it with mine, 4gb is better than 2.
Thx
AnthonyJohan94 said:
ok. Could yu share it? I want to compare it with mine, 4gb is better than 2.
Thx
Click to expand...
Click to collapse
Finally I have 5,17 GB as my internal. The method is to edit parameter file with RK3XX tool, and it works like charm
hi !
AnthonyJohan94 said:
Hello all.
Yesterday my venstar 2050 stuck at android logo. Then i search internet and flashed rom for very same device specification
It works but the touchscreen bluetooth and wifi isn't functioning. Not to mention the display became very weird.
So, does anyone have firmware for this tablet?
I really need it, please.
Or if someone have the tablet fully working. I want the ROM backup
Thx in advance
Click to expand...
Click to collapse
Sorry , how i can go in recovery mode with this tablet ? i can't.... my tablet go on , but at logo ANDROD die... it be in on , becouse if i connect it to the PC , it read the tablet ... how to do ?
so sorry for my bad english ...
FRSV said:
Sorry , how i can go in recovery mode with this tablet ? i can't.... my tablet go on , but at logo ANDROD die... it be in on , becouse if i connect it to the PC , it read the tablet ... how to do ?
so sorry for my bad english ...
Click to expand...
Click to collapse
had you try with quickboot?
im trying to do with mine but with bad results

Categories

Resources