After installing this ROM, I get to the screen where it says "Touch the Android to Begin". After I touch it, it says "Unfortunately, Setup Wizard has stopped." What can I do to fix this problem? My phone is kinda useless right now lol. Thank you in advance!
Wertzy said:
After installing this ROM, I get to the screen where it says "Touch the Android to Begin". After I touch it, it says "Unfortunately, Setup Wizard has stopped." What can I do to fix this problem? My phone is kinda useless right now lol. Thank you in advance!
Click to expand...
Click to collapse
I would pull the battery try to boot again, if that fails, I would SBF to 2.3.4 and reinstall CM10 A2.
CM10 does have a few issues, but it is a great ROM.
Thasian483 said:
I would pull the battery try to boot again, if that fails, I would SBF to 2.3.4 and reinstall CM10 A2.
CM10 does have a few issues, but it is a great ROM.
Click to expand...
Click to collapse
I restarted it multiple times...to no avail. And excuse me as I am a noob, but how would I SBF to 2.3.4? I can't seem to do much of anything with this phone right now...I'm really hoping I didn't brick it. =/
Wertzy said:
I restarted it multiple times...to no avail. And excuse me as I am a noob, but how would I SBF to 2.3.4? I can't seem to do much of anything with this phone right now...I'm really hoping I didn't brick it. =/
Click to expand...
Click to collapse
If you're unsure how to SBF, it's entirely possible you installed CM10 on GB 2.3.5 which may be what's causing all of your problems. If you haven't found the answer yet, I suggest reading one of the tutorials in the X2 General Forum. Here's a link to Moon Shadow's guide to SBF back to 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1317707
After SBF, you will need re-root, reinstall CWM, and start fresh.
Edit: Just to assuage your fears about bricking your phone, I've botched quite a few installs by forgetting steps or getting ahead of myself (forcing me to restart from scratch) and my phone is still working wonderfully. You just have to make sure you're following the devs' instructions to the "T" when you are flashing. It's dang near impossible to brick this bad boy.
ROMFlashah said:
If you're unsure how to SBF, it's entirely possible you installed CM10 on GB 2.3.5 which may be what's causing all of your problems. If you haven't found the answer yet, I suggest reading one of the tutorials in the X2 General Forum. Here's a link to Moon Shadow's guide to SBF back to 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1317707
After SBF, you will need re-root, reinstall CWM, and start fresh.
Edit: Just to assuage your fears about bricking your phone, I've botched quite a few installs by forgetting steps or getting ahead of myself (forcing me to restart from scratch) and my phone is still working wonderfully. You just have to make sure you're following the devs' instructions to the "T" when you are flashing. It's dang near impossible to brick this bad boy.
Click to expand...
Click to collapse
OMG thank you so much! That worked like a charm. Now that I'm back to stock, I'm gonna try again lol.
We all have gone through it at one point, so I'm glad I could help. Hope everything works out on your install! CM10 is awesome.
Sent from my DROID X2 using xda app-developers app
fyi roms are flashed on 2.3.4, except eclipse 2 which is flashed on 2.3.5
Related
Hi guys;
I want to update my Atrix, but I don't know what path to take?
a) Through the OTA 4.5.91...
b) Unlocking the bootloader, and then upgrading to GingerBread via Custom Roms...
I really need your help, because I am a newby in this whole area...
Right now I am runnig:
4.1.57 ATT
Android Version: 2.2.1
Build Number: GingerBlur 2.5
Your still on 57?
Sent from my MB860 using XDA App
yeah I am on 4.1.57
Why don't you at least update to 1.83. We've ben on .83 for months now.
Sent from my MB860 using XDA App
And what then?
artemalek said:
And what then?
Click to expand...
Click to collapse
Depends what you want to do with your phone. If you like testing out custom roms and stuff then go the way of unlocking the bootloader and flashing one of the custom GB roms. If you want a stock phone with some minor root modifications then flash ota and root. Just beaware if you do the ota build you cannot flash back to froyo (not sure why anyone would but just to warn you)
Sent from my MB860
can you refeer me to the posts where I can unlock the BL and then install a custom Rom
Yeah I am on 4.1.83 and Android 2.2.2.
I want to upgrade as well. Everything is stock currently.
I want to be able to do Cynogen later so I think I need to unlock and flash a custom rom.
So I am like the op and need to know where to go. There is so much argument and misinformation on this forum my head hurts. Just read for an hour and am more confused.
All I know is i dont want to do the OTA update lol!
HOwever I downloaded it already and my phone keeps asking me to install it...
DOes anyone know how to remove that?
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Sinful Animosity said:
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Click to expand...
Click to collapse
Your link seems to be broken. Thanks for the recommendations on roms!
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
mercilus said:
Your link seems to be broken. Thanks for the recommendations on roms!
Click to expand...
Click to collapse
D'oh! Will fix that immediately! Thanks for that!
artemalek said:
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
Click to expand...
Click to collapse
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Sinful Animosity said:
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Click to expand...
Click to collapse
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
mercilus said:
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
Click to expand...
Click to collapse
RSD is fine. I think sbf flash is for Linux.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
RSD is fine. I think sbf flash is for Linux.
Click to expand...
Click to collapse
I just followed the directions and RSD said it failed and gave me an error. I accidently hit show phone and it erased the error message but it was something about error at restarting.
Now my phone wont turn on? When I hit the power button/hold it all I get is blank screen.
It doesnt try to turn on or anything?
Did i mess up the phone permanently? crap... just what i was trying to avoid..
any advice?
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Battery was at like 80% when I last looked. So it was more when I started, and I did not leave the phone watched the whole process up til the point where it wont turn on anymore. So I doubt it lost all that battery in that brief 5 minute time.
Its been plugged in since still and no response from power button.
Everything was completely stock when I started.
Update: I just noticed when I take out my battery and plug in the charger I do get a green light as long as battery is out. When I put it in and plug in I get no lights. Not sure if thats helpful or means anything... (Just noticed its only with the USB charger I get the green light and not AC charger. The battery must be out)
I couldnt post this there, so im posting it here
I've flashed 2 other versions of this rom successfully in the past. The only difference is this time is factory reset it first. Then attempted to flash the rom. the Rom gave me an error, and thats when the bootlooping started.
I tried factory resetting, deleting cache, leaving battery out for 30 seconds.
Im stuck at the Moto screen
SO, what do i do? is there any pertinent information im leaving out?
Your going to want to flash the sbf, full instructions are in a thread in the development section, don't have access to the link at the moment I'm mobile, sorry mate.
Sent from my DROID X2 using XDA App
ok.
Is there any way to make sure this doesnt happen again? This is such a process
You could also try plugging the phone into a wall when its off to see if you can get into BSR and either restore a backup or try to flash again.
Sent from my DROID X2
lacross said:
Is there any way to make sure this doesnt happen again? This is such a process
Click to expand...
Click to collapse
It IS a bit of a process to go thorough. Part of the price to pay if you're gonna modify, I guess. If the suggestion above about trying the BSR program (Bootstrap Recovery program, also called "System Recovery" in app drawer) doesn't work for you, then SBF to stock, which should get you back live, then flash P3 rooted Gingerbread, then Eclipse. That will work. All the links with instructions and downloads have been graciously provided here by our Moderator, The Clown.
As you already know, Eclipse has loaded fairly easily in the past, and wiping data is the recommended procedure. While not absolutly necessary, it has helped others resolve problems they had after loading Eclipse in the past, so I wouldn't be afraid to do it. It's hard for anyone to say for sure why this happened to you this time. The process is a bit touchy, reqireing you to follow the instructions exactly - including, for example, plugging in the phone to a wall charger while using the System Recovery program. Perhaps you inadvertently left out some step along the way.
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Robin M said:
...the links with instructions and downloads have been graciously provided here by our Moderator, The Clown.
Click to expand...
Click to collapse
Thats MR. Clown to you!
lacross said:
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Click to expand...
Click to collapse
Whenever I have had to sbf back to froyo, I have always done the *228 before I installed the GB update.
nitwit said:
Thats MR. Clown to you!
Click to expand...
Click to collapse
Opps.
lacross said:
I dont THINK i did, but hey, i wouldnt doubt it.
Anywho, just for an update, im now pre-rooted GB, waiting for nitro to update the eclipse rom.
Problem is now, i dont have 3g. i tried *228 multiple times
Click to expand...
Click to collapse
Reflash the sbf, activate the phone, reflash P3Droids update, wipe data/cache/dalvik from custom recovery, flash Eclipse v0.3/4 wichever now that he has a newer release.... I had to do this yesterday as I wiped when I didnt get a homescreen after flashing Eclipse.
After I flashed the atrix alien port to my X2 my phone no longer recognizes my battery and will not charge it. Is anyone else having this problem? Are there any fixes to address this problem? If this has been addressed somewhere else I apologize I couldnt find it. Any help is appreciated, dont want to have to sbf back to stock.
Thanks
AW
atcbrownie said:
After I flashed the atrix alien port to my X2 my phone no longer recognizes my battery and will not charge it. Is anyone else having this problem? Are there any fixes to address this problem? If this has been addressed somewhere else I apologize I couldnt find it. Any help is appreciated, dont want to have to sbf back to stock.
Thanks
AW
Click to expand...
Click to collapse
Are you on v0.2 or v0.2.2?
when it happened to me I'd made the mistake of installing the rom over froyo
dragonzkiller said:
Are you on v0.2 or v0.2.2?
Click to expand...
Click to collapse
using v0.2.2. I just sbf'ed to 2.3.3 and am letting the batt charge again and am going to try to wipe the battery stats and see if that works. Thanks for the help, I will post my results.
Well just finished sbf'ing and flashing v0.2.2 again making sure to wipe dalvik, battery, cache, and data factory reset. Still get the battery message that says battery not recognized wil not charge.
If there are not any other ideas by tomorrow morning when I get up I will sbf again and try to download again and re-flash v0.2.2. Maybe a file was corrupt or something, I dunno.
Has anyone else had this problem?
Are you using a Motorola battery? Sometimes generics don't play well with custom roms.
Sent from my DROID X2 using xda premium
yep stock battery.
Well i have other issues other than the battery. The phone randomly goes crazy and just starts acting like I am hitting buttons, opening programs and typing random letters. I tried re-downloading the rom and re-flashing but still the same issues with the battery. I guess I will sbf back to stock and wait for another update. who knows it may be an issue with my phone since no one else seems to have this problem.
Thanks
AW
I've been using this ROM version since I released it and have yet to run into any problems you described. Is there any other information you can give me?
Sent from my DROID X2 using XDA App
Yes this happend to me. What you did was probally flashed oved 2.2. Thats a no.no. Heres the fix. RSD flash the official verizon 2.2. then root with gingerbreak. Then install custom recovery. Enter recovery mode. Wipe all. You must do this for it to work.Flash P3's pre rooted gingerbread. After install then go into recovery, wipe again then flash alien rom. It worked for me. You cant cross flash roms, they have to go into this order. 2.2, 2.3.3, 2.3.4.
Sent from my DROID X2 using, wait is that a Gorilla?
Furioustylez said:
Yes this happend to me. What you did was probally flashed oved 2.2. Thats a no.no. Heres the fix. RSD flash the official verizon 2.2. then root with gingerbreak. Then install custom recovery. Enter recovery mode. Wipe all. You must do this for it to work.Flash P3's pre rooted gingerbread. After install then go into recovery, wipe again then flash alien rom. It worked for me. You cant cross flash roms, they have to go into this order. 2.2, 2.3.3, 2.3.4.
Sent from my DROID X2 using, wait is that a Gorilla?
Click to expand...
Click to collapse
I appreciate your effort to help but this is not what happened. I flashed from the official Verizon 2.3.3, then used red lite to she back and tried again. I have tried this rom at least 4 times now everytime I get the same results.
Dragon, thanks for your willingness to help. Basically what happens is the rom v0.2.2 flashes with no errors. When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
atcbrownie said:
When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
Click to expand...
Click to collapse
I have seen videos of x2s doing this on youtube, probably need a new phone
Sent from my DROID X2 using XDA App
atcbrownie said:
I appreciate your effort to help but this is not what happened. I flashed from the official Verizon 2.3.3, then used red lite to she back and tried again. I have tried this rom at least 4 times now everytime I get the same results.
Dragon, thanks for your willingness to help. Basically what happens is the rom v0.2.2 flashes with no errors. When the phone boots I immediately get a message saying that my battery is not recognized and that I need to install a moto battery. After I hit the ok button the phone acts like a pc when you mash on the keyboard all different apps open up, random keys get typed, when I hit the home button the programs just open back up like ten at a time. Its kinda hard to explain. When I get off work tomorrow I will try to reflash ATRIX alien and post a video of what is going on.
Click to expand...
Click to collapse
Unfortunately, there appears to be no real solution to this. I hate to say that, but no one else is having these issues, then it must simply be a problem with your phone. I wish you luck, but there's not much I can do if your phone is acting up. I wish there was more I could do to help.
dragonzkiller said:
Unfortunately, there appears to be no real solution to this. I hate to say that, but no one else is having these issues, then it must simply be a problem with your phone. I wish you luck, but there's not much I can do if your phone is acting up. I wish there was more I could do to help.
Click to expand...
Click to collapse
Thanks for your help I don't know what the issue is, it doesn't happen on stock gingerbread just on the ATRIX rom. Thanks anyway. I will keep an eye on your dev thread and will try again when the next patch comes out.
when i was on the alien port i did not have any battery problems. did the same thing as you sbf'ed to the official verizon 2.3.3 rooted and then onto the alien rom. my friend was having some issues however and what helped him was sbf'ing to 2.2.2, then rooting, then flashing p3's pre-root gingerbread onto that. after that his phone accepted the alien rom just fine. not sure what if any difference there is between the methods but it helped him.
Yeah like I said you cAnt do that . You have to flash 2.2 first
Sent from my DROID X2 using XDA Premium App
When I am flashing eclipse for some reason I am getting a abort error for line 294?? I have downloaded the zip file twice and same problem. Any ideas??
Edit. Something is wrong Liberty X3 is showing same thing. failure at line 398 set_perm_recursive 0 0 0755 system
This sucks so bad. I can restore back to my stock 2.3.4 nano backup. Shouldn't that be as good as a fresh start like a sbf? Or will I need to try a sbf to fix what I have going on here? Ah man stock sucks!!
I was able to flash the sd flip flop and battery fix with no issues to the stock 2.3.4 But when I try to flash a rom I get errors.
I would just SBF (no biggie) unless someone with more experience with this issue replies.
X0dus said:
I would just SBF (no biggie) unless someone with more experience with this issue replies.
Click to expand...
Click to collapse
If I dont get a answer I will sbf tomorrow morning. I have a stock back up I always save. I was on Eclipse and also had back up of liberty and eclipse. However I was reading the post about custom roms do not need v6 supercharge. So I deleted my recovery of elipse and liberty and went back to stock. When I went to try and flash the roms I get errors. I can flash other things but not the rom.
I will probably sbf later tonight or first thing in the morning. Weird I swap between roms all the time never had this issue.
So did you try flashing Eclipse and/or Liberty after flashing your stock backup?
X0dus said:
So did you try flashing Eclipse and/or Liberty after flashing your stock backup?
Click to expand...
Click to collapse
Ya I tried both eclipse and liberty and they both get line errors. Hopefully the sbf does it I will have to do it tonight. I am missing eclipse with ics theme.
FIXED... I SBF to stock 2.3.4 and rooted again. Flashed the same Eclipse 1.3 zip and everything is good again. Thanks Xodus for your help!
Travisdroidx2 said:
FIXED... I SBF to stock 2.3.4 and rooted again. Flashed the same Eclipse 1.3 zip and everything is good again. Thanks Xodus for your help!
Click to expand...
Click to collapse
Good deal. np (really didn't do much)
Not the best solution, but fixed nonetheless. I tried to Google those errors and unfortunately this thread was the first to show up. Not much luck with following results given. Say, you wanna add [Solved] to the title? Helps with others with a similar issue..assuming they search and read first.
Sent from my DROID X2 using xda premium
X0dus said:
Good deal. np (really didn't do much)
Not the best solution, but fixed nonetheless. I tried to Google those errors and unfortunately this thread was the first to show up. Not much luck with following results given. Say, you wanna add [Solved] to the title? Helps with others with a similar issue..assuming they search and read first.
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Got it thanks. Sorry for freaking out. I hope this can help someone else.
Still having this issue!!
So after last time I did a sbf I was able to flash Eclipse 1.3 and also Liberty X3 both and was smart enough to get them nano back up saved. Today I wanted to try another rom and had the line error again. So I went ahead and did a sbf again. After that I rooted again and then had a clean start to flash Molten 2.1 It did the same thing again. I am not sure why this is happening but luckily my back up that I saved work still. So I am going back to stock then going back to eclipse. I am puzzled now I thought the fact that I sbf and also wiped data 3 times with cache I would be good to go but not the case. I am getting scared that I will not be able to flash future roms.. I removed solved from the title since I still have the problem even after I sbf this time.
I made it back to my saved eclipse 1.3 but I really wish I knew what was going on.
So I flashed CM9. On the main screen. Go to touch the little android dude and it says "unfortunately setup Wizard has stopped" and now idk how to get around or fix it?
can anyone shed any light on the subject?
Thanks in advanced
-35se
Tried to re-install but its not letting me. Guess that S3 is gonna come earlier than I expected... Which means missing out on the quadzillas coming later this year :/
What was your process of doing things? Start from the beginning. Just simply saying it didnt work doesnt help. Where you coming from a different ROM? Did you make sure you were on android 2.3.4? Did you wipe data, cache and dalvik cache before flashing? Let us know the steps you took.
Re download cm9 and gapps, sbf and try again and follow the directions word for word, don't just think you got it, follow the steps
Sent from my MB870 using xda app-developers app
Came from CM7. I ended up just clicking the screen like mad in frustration and somehow it went to home screen....
I think maybe Gapps didnt install correctly bc im getting error messages about gapps. But when i went to re-install it, it just freezes the phone in recovery and i have to pull the battery.
35se said:
Came from CM7. I ended up just clicking the screen like mad in frustration and somehow it went to home screen....
I think maybe Gapps didnt install correctly bc im getting error messages about gapps. But when i went to re-install it, it just freezes the phone in recovery and i have to pull the battery.
Click to expand...
Click to collapse
You are using the ICS gapps right? Not the Same gapps file you used for CM7?
jsgraphicart said:
You are using the ICS gapps right? Not the Same gapps file you used for CM7?
Click to expand...
Click to collapse
Yes the gapps off this site. Every time i go to re-install them it just gets stuck. Any suggestions? should i just wipe everything and try again?
Im not to worried about messing it up again bc im getting an S3 today. I would just like to figure it out so i can do it for my brothers X2.
LordRalh3 said:
Re download cm9 and gapps, sbf and try again and follow the directions word for word, don't just think you got it, follow the steps
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
+1