Related
Hi, I have some problems restoring and setting my my APNs up.
I have tried so many AOKP ROMs and in every and each ROM, there are no APNs in the list, i tried Reset to Default, fixing permissions, creating a new APN but when saving, nothing happens.
Can anyone please help me out?
Thank you!!!
opticon107 said:
Hi, I have some problems restoring and setting my my APNs up.
I have tried so many AOKP ROMs and in every and each ROM, there are no APNs in the list, i tried Reset to Default, fixing permissions, creating a new APN but when saving, nothing happens.
Can anyone please help me out?
Thank you!!!
Click to expand...
Click to collapse
I've had this issue before, after flashing ROMs I could not get the APN's.
What I did was Manually select the Network then select the Carrier.
After that I would reboot the phone and walla it works
Thank you for replying hing98, but I did what you said and it didn't work!
I've installed the latest CM9 and it didn't work neither ... im desperate now
Reboot
Sent from my GT-I9100 using xda premium
opticon107 said:
Thank you for replying hing98, but I did what you said and it didn't work!
I've installed the latest CM9 and it didn't work neither ... im desperate now
Click to expand...
Click to collapse
Reboot 2-3 times it should definitely show up now.
I rebooted my phone like hundred times.
I've just flash Lite'ning rom thru odin, I seemed to work (I saved an APN) but I didn't have internet so I modified my MNC in the APN pressed save and then the APN disappeared
Pull battery...
Pull battery and your APN should be restored. With Hydrog3n ICS, I'd never get signal or data when flashing but after pulling battery and removing and replacing the SIM, I get coverage back.
Download an app call hiapn from play.
Might need to use TB to make it a system app.
It can automatically set your apns based on your sim.
It works 100% for me.
----------------------
GTI9100
Hydra H2O 1.2.1
fluxi xx.01_rc5
I have different behavior on different ROMs. Sometimes phone needs to be rebooted to restore APNs. Sometimes it is simply needed to wait for a while.
I have installed ROM in the evening and after hours of tries I simply went to sleep completely disappointed. In the morning internet was online
charleypark said:
Pull battery and your APN should be restored. With Hydrog3n ICS, I'd never get signal or data when flashing but after pulling battery and removing and replacing the SIM, I get coverage back.
Click to expand...
Click to collapse
Didn't work
kubics said:
I have different behavior on different ROMs. Sometimes phone needs to be rebooted to restore APNs. Sometimes it is simply needed to wait for a while.
I have installed ROM in the evening and after hours of tries I simply went to sleep completely disappointed. In the morning internet was online
Click to expand...
Click to collapse
I rebooted my phone several times, I installed Dragon ICS ROM last night and I let it rest all night... no APNs yet .
Is your phone working, i.e. carrier is detected and voice services are working?
WINNER!
aceofclubs said:
Download an app call hiapn from play.
Might need to use TB to make it a system app.
It can automatically set your apns based on your sim.
It works 100% for me.
Click to expand...
Click to collapse
Now the APNs appear but internet isn't working and when I edit the MNC field and save the APN, the APN disappears from the list
Any idea?
kubics said:
Is your phone working, i.e. carrier is detected and voice services are working?
Click to expand...
Click to collapse
Yes, actually I got a brand new SIM card last Thursday. I can make phone calls, send and receive SMS, connect to WiFi. I don't know what you mean,exactly, with voice services.
opticon107 said:
...so I modified my MNC in the APN pressed save and then the APN disappeared
Click to expand...
Click to collapse
I know, this is probably stupid question, but is your mobile data enabled? I am asking because I noticed that ROM behaves exactly as you wrote here. When mobile data toggle is off and you edit some APN, edited APN disappears…
kubics said:
I know, this is probably stupid question, but is your mobile data enabled? I am asking because I noticed that ROM behaves exactly as you wrote here. When mobile data toggle is off and you edit some APN, edited APN disappears…
Click to expand...
Click to collapse
Yes mobile data is enabled actually it doesn't matter if it's enabled or disabled, always delete the APN when I attempt to modify and save it.
Is it working with samsung stock rom? Have you used some kernel cleaning scripts?
kubics said:
Is it working with samsung stock rom? Have you used some kernel cleaning scripts?
Click to expand...
Click to collapse
DragonICS-25-05-2012-SGS2 Kernel: 3.0.32-FLUXI-XXetc...
But I have also tried: litening ROM, CM9, MIUI, Resurection Remix, Omega...etc..and even tried CM7 just to verify if it was ICS related issue.
But was the Internet working on original Samsung ROM?
I am asking this because when I first time tested Fluxi kernel, I lost WiFi functionality because of kernel cleaning script I have used. I had to return back to Samsung ROM, root again and install AOKP ROM to fix it.
Sometimes are these issues related to kernel cleaning or another possibility is, that you did not wipe phone correctly between different ROMs.
I would recommend to return back to original Samsung ROM (using Odin) and then to root and instal AOKP ROM exactly according to instructions.
kubics said:
But was the Internet working on original Samsung ROM?
I am asking this because when I first time tested Fluxi kernel, I lost WiFi functionality because of kernel cleaning script I have used. I had to return back to Samsung ROM, root again and install AOKP ROM to fix it.
Sometimes are these issues related to kernel cleaning or another possibility is, that you did not wipe phone correctly between different ROMs.
I would recommend to return back to original Samsung ROM (using Odin) and then to root and instal AOKP ROM exactly according to instructions.
Click to expand...
Click to collapse
Internet was working on every ROM I used BEFORE this happened, this problem came from nowhere , I always do the proper wipes/cleanings between ROMs. I have tried with Siyah Kernel, and others. I'll try the Original ROM and I'll let you know what happen, ok? Thank you.
If you have more ideas please post them
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
alchemist83 said:
All i can suggest is your apn settings?
Can try Offline SIM APN Database (get on Google Play) to insert the correct apn settings.
Click to expand...
Click to collapse
Thank you for the suggestion. The APN settings on a fresh install, all wiped, are correct and the same as in a working setup.
Any other ideas? Am I really the only one with that problem?
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
JJEgan said:
Modem tried APN correct .
Suggest next step is factory reset ..
Step after that is to install an official stock rom .
Others who may have a problem post in the roms thread .
jje
Click to expand...
Click to collapse
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
DF5JT said:
Did a factory reset, totally clean install with everything wiped.
Also, did a clean wipe and installed official stock ROM. Lost root, started from scratch and still didn't work.
I'd love to post in the ROM forums, but haven't yet posted my mandatory 10 postings.. Maybe this thread helps me to reach that limit
Click to expand...
Click to collapse
Possible hardware problem then .
jje
JJEgan said:
Possible hardware problem then .
jje
Click to expand...
Click to collapse
Very unlikely since it works on stock ROMs and [email protected] 0.6.
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
d4fseeker said:
Uhm you just said that it still did not work on Stock?
What error message does the deviche present in *#4636#* -> phone info under Gprs?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No, that's not what I said. Stock ROMs work just fine; I actually just flashed the latest leak (DLI5) and had no problems with the network. The problem hasn't changed, so it's what I wrote in the OP: Only JB to work ist latest leak and [email protected] 0.6. All others can be installed but have not network connection other than WiFi.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
EDIT: If it helps, I speak/write fluent german ('Cause I live in germany ^^)
familyguy59 said:
Have you tried flashing a new baseband? i had the same problem, when flashing the franco. Kernel..
or, go back stock, then reflash the desired ROM
Click to expand...
Click to collapse
Thanks for trying to help.
Yes, I have been playing around with all kinds of basebands, trying to flash modems etc. but that does not seem to be the reason for it. I have had different modems working and the very same modems simply did not work with PA at all. Best example ist yesterday's leak DLI5 which I flashed and had a virgin like system working just fine with my network. I then flashed the PA ROM, which then had the same baseband as the latest stock ROM, but, alas, same story: No network.
The weird thing is the brief connect it always shows in the status bar. It lasts roughly 4-5 seconds and then disconnects again, only showing the empty network status display.
It really sucks, because I find the idea of hybrid ROMs really appealing, in fact, this seems to me as a truly superior way of making use of the 720p display.
Need to try logcat next to see whether the connect/disconnect somehow can be monitored from there. Will report on that.
DF5JT said:
I can't post to the dev forum, so maybe someone over here can help:
I tried the PA ROM, because I really love the hybrid mode. The ROM has worked fine and looks great, but whatever version I flash, the mobile network, both data and phone, simply doesn't work.
It briefly connects to my provider (drei.at) and immediately disconnects, no matter whether I have data connection enabled or not.
Have tried this with all available versions of PA and did the usual routine: wipe, format system, wipe data. I even went totally back to a stock ROM, tried various modems, the current one being XXDLH9, which works just fine on [email protected] 0.6 ROM.
Had the same problem with Omega, FoxHound, and god knows what other ROMs I tried. No matter what, the only JB ROM actually working is [email protected] 0.6, that's it.
Is this a known phenomenon or have I overlooked something obvious?
The phone used to be a branded and simlocked Austrian T-Mobile, but ever since it has been debranded and SIM unlocked.
Any ideas?
Click to expand...
Click to collapse
Bump.
Nearly the same prob to me! I loose data if I change my location, also provider "3" in Austria! Stock is working, CM10 nightly also. I tried different Modems tomorrow the ODIN Leak.
Andi
me too
no data network after flash on two diffrent galaxy s2's
kaos7 said:
no data network after flash on two diffrent galaxy s2's
Click to expand...
Click to collapse
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
WiFi works, Mobile Networks do not
2Fast 2Low Customs said:
I was having the same issue, I pulled the SIM and wiped it down, blew off the contactors, seems to of solved the problem for the time being.
Click to expand...
Click to collapse
I just installed ParanoidAndroid. I'm kind of a noob to all of this.
I understand some, but not all.
My mobile networks are not working.
I don't get any notification at the top of the screen either saying I'm on a mobile network.
I've messed around with the APN settings. It seems that every now and then it'll connect for a brief moment, but I can't really do anything unless I'm connected to WiFi.
Any help would be appreciated.
I came from a stock phone rooted.
Installed this and now I'm here.
Please HELP!!
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
BHARGAV33 said:
Had this problem with stock roms..
The network is fine but doesn't exchange data correctly.. AOSP worked fine for me.. PA= flawless
Click to expand...
Click to collapse
Turns out I just had crappy reception at home.
I wanted to get 3+ but something got in the way and had to go with the 2.+
Sorry for not understanding, but what is AOSP? I see that, but I don't get what is what.
ASOP = Android Open Source Project.. They are best but not that much good at battery
Spend some time on xda and Google your doubts.. You'll surely understand everything from android
Due to instability issues in the latest nightlies, I clean flashed and reverted back to CM11 milestone 5. After doing this, I haven't been able to get mobile data. Voice and sms work fine, just "mobile network state disconnected" and no data connectivity. Also after flashing back to M5, "Phone" seems to prevent the device from sleeping. In battery stats, the device is always awake, with "Phone" using the majority of the batter.
I've tried re-flashing CM11 M5 multiple times, I've also flashed different modems, and I've also called AT&T to reset my internet connectivity. Nothing has worked thus far. Any suggestions? :good:
UPDATE/SOLUTION:
I got mobile data back by going back to stock, clean flashing AOKP (which works with mobile data), then dirty flash to CM11. Quite unorthodox, probably not the best solution, but it's the only 'fix' that has worked!!
I've tried many other suggestions, such as the "patched" modems & kernels, to no avail. Finally this works, dreams do come true
UPDATE: I tried ODINing back to stop 4.3 ROM, on which data was working again. However, upon flashing back to CM11, data stopped working once again. I tried flashing AOKP, which *did* get data back, so I'm assuming this is a CM11-exclusive problem.
I really don't know how the CM11 data problem persisted even after flashing back to stock and then re-flashing CM11. What could've gone wrong? Anyways, I guess I'm sticking to AOKP for the time being.
n0stalgia said:
UPDATE: I tried ODINing back to stop 4.3 ROM, on which data was working again. However, upon flashing back to CM11, data stopped working once again. I tried flashing AOKP, which *did* get data back, so I'm assuming this is a CM11-exclusive problem.
I really don't know how the CM11 data problem persisted even after flashing back to stock and then re-flashing CM11. What could've gone wrong? Anyways, I guess I'm sticking to AOKP for the time being.
Click to expand...
Click to collapse
Which AOKP rom you using? Is it for Kit Kat 4.4.2?
LAD2012 said:
Which AOKP rom you using? Is it for Kit Kat 4.4.2?
Click to expand...
Click to collapse
yep, latest AOKP nightly
check out this thread
http://forum.xda-developers.com/galaxy-s3/help/major-problem-s3-network-t2748246/page2
and this one too
http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289
n0stalgia said:
yep, latest AOKP nightly
Click to expand...
Click to collapse
Have you got a link to the rom - any issues with Wi-Fi or 3G/Mobile Data? This CM 11 rom I have is awesome but it's a pain that the 3G/Mobile data just doesn't work at all.
LAD2012 said:
Have you got a link to the rom - any issues with Wi-Fi or 3G/Mobile Data? This CM 11 rom I have is awesome but it's a pain that the 3G/Mobile data just doesn't work at all.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-aokp-kitkat-i9300-t2597838
I had a problem connecting to the network with all ROMs
http://forum.xda-developers.com/galaxy-s3/help/emergency-calls-t2748393
If you look on that thread, try installing the specified modem and kernel. Hope this helps.
lukeg26 said:
I had a problem connecting to the network with all ROMs
http://forum.xda-developers.com/galaxy-s3/help/emergency-calls-t2748393
If you look on that thread, try installing the specified modem and kernel. Hope this helps.
Click to expand...
Click to collapse
Did you install the patched kernel/modem while on stock ROM or on a custom ROM?
n0stalgia said:
Did you install the patched kernel/modem while on stock ROM or on a custom ROM?
Click to expand...
Click to collapse
Got the 4.3 stock ROM from sammobile then installed the kernel and modem from TWRP recovery - haven't tried a custom ROM yet but I presume it'd work in the same way
UPDATE:
I got mobile data back by going back to stock, clean flashing AOKP (which works with mobile data), then dirty flash to CM11. Quite unorthodox, probably not the best solution, but it works!
I've tried many other suggestions, such as the "patched" modems & kernels, to no avail. Finally this works, dreams do come true
I've been having some issues with WiFi connecting using Dirty Unicorns, as well as random reboots. And i know several other people have too, from looking through that thread. I even posted a bug report on their Jira bug tracking system.
The jewel maintainer for DU spoke with another maintainer of the ROM for a different device (who also runs it on a Jewel) and neither one of them is having the same problems, so it seems like it's probably something on my end. The one thing that we noticed was different was the radios.
I ran the RUU to get my new partitions, which updated me to the latest radios. Apparently Mazda (as he's known here) used a different method, And still had older radios. His radio is 1.12.11.1119 and he has not experienced any issues.
I'm on 1.13.11.1105 and get random reboots and occasional inability to attach to my home WiFi until I reboot, after which it immediately connects.
I guess I'm wondering, is it advisable to change radios back to an older version, if it had the possibility of correcting my issues? And if so, how do I do it? And if I do it and it doesn't help, can I easily go back to the most recent radio, or do I have to go through the RUU again?
I don't have any experience flashing radios, so if it's different than just flashing a zip, perhaps a tip on how to do it would also be appropriate.
Thanks for any and all advice, I really would appreciate some feedback.
I have ran into a similar wifi problem on the new build posted today. The wifi wont turn at all on this build v7.8
Anyone have better luck with dirty flashing the ROM over top of DU 7.7? Sometimes that helps.
fizbanrapper said:
Anyone have better luck with dirty flashing the ROM over top of DU 7.7? Sometimes that helps.
Click to expand...
Click to collapse
I'm willing to be a guinea pig. I'll do a nandroid of my current setup and do a dirty Flash. I'll let you know how it goes.
Well, I did it. I dirty flashed and I have Wi-Fi. Now, since I have my backup, I think I'm going to do a clean flash and see what happens.
rck77 said:
I have ran into a similar wifi problem on the new build posted today. The wifi wont turn at all on this build v7.8
Click to expand...
Click to collapse
I just did a clean install of 7.8 and still have Wi-Fi. What did you wipe before installing?
bpaulien said:
I just did a clean install of 7.8 and still have Wi-Fi. What did you wipe before installing?
Click to expand...
Click to collapse
Yup did wiped data and cache. Flashed back to 7/7 build and wifi turns on. Tried to again and got the same result. weird...
rck77 said:
Yup did wiped data and cache. Flashed back to 7/7 build and wifi turns on. Tried to again and got the same result. weird...
Click to expand...
Click to collapse
Try wiping system and data too (like it says in the Dirty Unicorn ROM's OP.) That's what I did. It might make a difference.
Sent from my Nook HD+ with official CM11 on emmc using Tapatalk pro
My WiFi died kind of randomly, so I dirty flashed a custom kernel. WiFi is back now.
no wifi
WiFi stopped working in version 7.8. I wouldn't care so much if Sprint had decent LTE coverage and speeds.
[ROM] Dirty Unicorns 4.4.4 {Jewel} v7.8 & v7.9 [Both New/Old Partition] no wifi
fizbanrapper said:
My WiFi died kind of randomly, so I dirty flashed a custom kernel. WiFi is back now.
Click to expand...
Click to collapse
What kernel are you using? I had been using Bubba, but recently I was reading that WiFi doesn't work at all on it, and since it's no longer being supported, i don't think there's much hope of getting it working again.
hey im not sure why but when i call some one while having the pac man rom or any of the aosp roms i cant get my screen to turn back on while in a phone call and wanted to know if theres any one that knows whats wrong with it
epicdumdum said:
hey im not sure why but when i call some one while having the pac man rom or any of the aosp roms i cant get my screen to turn back on while in a phone call and wanted to know if theres any one that knows whats wrong with it
Click to expand...
Click to collapse
Hey if you might try this. Go to settings/device/call and uncheck " Turn off screen during calls" the screen will stay on during calls, or is supposed to. You might test your proximity sensor, here is a link to Galaxy Tools app http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 the download is a zip file so put it on your PC desktop. Just change it to an apk file (bring it up with 7zip or WinRAR and rename it) and in stall on your device. Now click Testing/Phone Info then test the proximity sensor, if ok then something in the rom, if not, the phone screen will not turn on and off during calls.
No issues here
I've been running Pac-Man 4.4.4 pretty much since it was made available.
I haven't had that issue.
Make sure you're wiping everything and not restoring any data. Except maybe texts and like call logs.
normally i dont have issues but its just been with the aosp roms that it wont work right im not sure if i should clear oout my dalvik and everything as well and the reinstall the rom
epicdumdum said:
normally i dont have issues but its just been with the aosp roms that it wont work right im not sure if i should clear oout my dalvik and everything as well and the reinstall the rom
Click to expand...
Click to collapse
Yes, when you flash a ROM you should wipe partition and dalvik cache. As well as doing a factory data reset.
Also, are you running the latest version? There was a version during its beta process where that issue did come up. Since pretty much all AOSP ROMs are based on CM11 they'd all exhibit the same issue being that CM11 is upstream.
Good luck
yeah i am running the latest version of it but it just doesnt seem to work properly also would the recovery mess with the ROM at all??
epicdumdum said:
yeah i am running the latest version of it but it just doesnt seem to work properly also would the recovery mess with the ROM at all??
Click to expand...
Click to collapse
It has been known that some recoveries work better for some roms. I'd check around and see what others may be using. See what the rom developer recommends for flashing the rom . Also maybe try an older more stable version of the rom your running.
Yeah I'd love to but I c can't post on that website