Still didnt get my Jelly Bean update yet!! - Galaxy S III Q&A, Help & Troubleshooting

Hello,
I have SGSIII and I still didnt get the JB update. I tried KIES and OTA but still giving "No update available"
Whats wrong? Here is my data:
AP: I9300XXBLFB
CP: I9300XXLFB
CSC: I9300JVBLF3
and on Kies:
Current firmware version: PDA:LFB / PHONE:LFB / CSC:LF3 (AFR)
Please how can I know to which country does my SIII belong? and when my update will be available?
Any help would be highly appreciated.

It's already out
It's already out but i use custom rom.

casperove said:
Hello,
I have SGSIII and I still didnt get the JB update. I tried KIES and OTA but still giving "No update available"
Whats wrong? Here is my data:
AP: I9300XXBLFB
CP: I9300XXLFB
CSC: I9300JVBLF3
and on Kies:
Current firmware version: PDA:LFB / PHONE:LFB / CSC:LF3 (AFR)
Please how can I know to which country does my SIII belong? and when my update will be available?
Any help would be highly appreciated.
Click to expand...
Click to collapse
As per thousands of identical posts updates are nothing to do with XDA ask Samsung or your phone supplier .
jje

You're from United Arabs Emirates. Download this samsung stock jelly bean rom and also odin and flash it in download mode. After that do all wipes from recovery and install csc select in your phone from Google Play and just check you're in AFR.
http://www.sammobile.com/firmware/?page=8&view=7532
Instructions For Flashing Firmware:
Extract the firmware
Open Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
In ODIN Click PDA and select *.tar.md5
Then finally click START!
Instructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)

Thank you huskysdg. Why do i need to change CSC? is this ROM arabic enabled? and is it confirmed that the update wont happen through Kies since I have many data that cant be baked up?

This rom is the csc AFR, in Samsung codes means that's for arabics. This rom is official and stock, you shouldn't have any problem.
You need to back up your data with kies or with titanium backup always before flashing new roms just in case. For titanium backup you need to be rooted, look for cf-root v.6.4 for sgs3 here at xda. After rooting just buy and use triangle away from CF to keep your recovery binary counter to 0 and not loosing your samsung warranty.
If the csc enabled corresponds to the same region of the rom you've flashed in your device then kies will recognized your rom as offcial and will offer you the update option through OTA or through kies itself. That's the reason to check with app csc select if you're in the right csc choice. The app offers you to change csc but if you change csc there's always an automatic wipe from android itself.
Dude, if you don't feel capable of flashing the new rom look for more info at the sgs3 threads here in xda and how to do everything is explained several times by different people. I don't have more time for this.
Enviado desde mi MZ601 usando XDA Premium HD app

Related

[Q] Help! The confuzed relation between 'sale code' and firmware!

My S2 came from 'expansys online' and had the information below and no update in KIES.
PDA: XWKI4
Modem: XXKI1
CSC: OXAKI2 (SEB)
I changed the sales code to NEE by '*#272*IMEI#' and then KIES asked me to update to the following version.
PDA: XWKI8
Modem: XXKI4
CSC: OXAKI2(NEE)
Then I flashed stock firmware from Intratech's thred. But KIES said my phone cannot be updated by it. I check the information by '*#272*IMEI#' and there is just one work 'NEE' after 'sales code' and NOTHING SHOWN BELOW(before there were a list i can select). I thought I should have one 'XEN' to select at least but nothing.
The flashing should be successful because there were some apps with Dutch language.
PDA: XWKJ3
Modem: XXKI4
CSC: XENKJ1
At latst yesterday I flashed KK5 combination from Intratech's thred and succeed (with special apps like bbc i-player) but problem is still there. I cannot see any CSC to select by '*#272*IMEI#'.
KIES says the firmware 'I9100XWKK5/I9100XEUKH2/I9100XXKI3/I9100XWKK5' cannot be updated by it.
So anybody know how to solve it or who know which combination can be updated by KIES?
Anyone can give a help?
I dont really understand what you are trying to achieve .
Kies looks at Product Code and a few other codes .These are then matched against firmware on the Kies server . No match = no download .
Why vendor not updated
product Codes do not match any firmware .
Kies may not be able to match up the current codes on your phone .
You have a phone you changed its sales code
you updated then you flashed stock firmware then you flashed stock firmware again .
You want latest firmware then flash stock rom and flash relevant CSC to your location .
jje
JJEgan said:
I dont really understand what you are trying to achieve .
Kies looks at Product Code and a few other codes .These are then matched against firmware on the Kies server . No match = no download .
Why vendor not updated
product Codes do not match any firmware .
Kies may not be able to match up the current codes on your phone .
You have a phone you changed its sales code
you updated then you flashed stock firmware then you flashed stock firmware again .
You want latest firmware then flash stock rom and flash relevant CSC to your location .
jje
Click to expand...
Click to collapse
My question is why there is no CSC which I can select after I call '*#272*IMEI#'. There is just one word 'NEE'. No CSC list.
I flash XEU so I think at least there should be XEU CSC and the word should be changed from NEE to XEU. But the fact is not so.
And how to change product code?
You flashed the Frankenstein version of KK5 which is a combination that Intratech put together, and he placed it in the FRANKENSTEIN section, Kies will not recognize it, in order to flash with Kies, stay with stock roms/combinations.
The biggest question is why do you want to flash with Kies and with ODIN, pick one and stick with it, flash the CSC separately if you do not see it, or download CSC select from the market.
achillies400 said:
You flashed the Frankenstein version of KK5 which is a combination that Intratech put together, and he placed it in the FRANKENSTEIN section, Kies will not recognize it, in order to flash with Kies, stay with stock roms/combinations.
The biggest question is why do you want to flash with Kies and with ODIN, pick one and stick with it, flash the CSC separately if you do not see it, or download CSC select from the market.
Click to expand...
Click to collapse
what I most warry about is why there is no XEU displayed. After calling *#272*IMEI# just 'Sales Code : NEE' is displayed (sorry no image). Anyone whose phone just has non-multi CSC can show me your infromation after calling.
NYHGai said:
what I most warry about is why there is no XEU displayed. After calling *#272*IMEI# just 'Sales Code : NEE' is displayed (sorry no image). Anyone whose phone just has non-multi CSC can show me your infromation after calling.
Click to expand...
Click to collapse
Flash the CSC separately, then use the market app to select it, will reset your device though...

Upgrading to latest ICS failes

Hello,
Trying to upgrade my Galaxy S II to latest ICS builde that came out today. I got a message on my phone that there is a new version. Tried upgrading through mobile data, WLAN and through KIES, but it wont upgrade. Through mobile and WLAN it fails after downloaded, reboot and installing 5%. With Kies it says that the phone is not supported in this recovery mode, something like that.
I have rooted my phone back in the days but I loaded original firmware back on it.
Model: GT-I9100
Android version: 2.3.5
Baseband version: I9100XXKI4
Kernel version: 2.6.35.7-I9100XWKI8-CL616395 [email protected] #2
Build number: GINGERBREAD.XWKI8
Any sugestions?
Kies says: Your device does not support software upgrading via Kies.
Current firmware version: I9100XWKI8/I9100XXKI2/I9100XXKI4/I9100XWKI8 (ODK)
Just a guess.. But you have to change your CSC back to NEE if that is what it came with
mljjlm said:
Just a guess.. But you have to change your CSC back to NEE if that is what it came with
Click to expand...
Click to collapse
What do you mean about CSC?
larsen82 said:
What do you mean about CSC?
Click to expand...
Click to collapse
It is some software and settings that are different from place to place. The generic one in the nordic countries is called NEE. Kies will only recognize your software and offer an upgrade if all the software-versions represents one in their database.
Sometimes when flashing roms your CSC can change, and then you will have to change it back in order to be able to upgrade using Kies or Softwareupdate
mljjlm said:
It is some software and settings that are different from place to place. The generic one in the nordic countries is called NEE. Kies will only recognize your software and offer an upgrade if all the software-versions represents one in their database.
Sometimes when flashing roms your CSC can change, and then you will have to change it back in order to be able to upgrade using Kies or Softwareupdate
Click to expand...
Click to collapse
And where can I find this CSC for Norway?
If your phone is branded, you will have to get that CSC, if not you will probably have to look for NEE
I have now rooted my phone with following firmware:
GT-I9100_NEE_I9100XWKI8_I9100OXXKI2_I9100XXKI4
It's got NEE, but still getting errors in kies: your device doest not support software upgrading via kies
I think I have found right kernel and firmware for my phone thanx to these sites:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_II_Series
http://www.samfirmware.com/
Flashing the firmware (rom) now. Hoping this will help get kies working again as it should be working.
If it doesn't you should manually change your CSC
I gave up upgrading through kies or phone. Rooted my phone and loaded an official rom (4.0.3) on it. Works like a charm
My problem now is restoring apps and data from my Titanum backup.. I have forgotten the Titanum armored passphrase
Hello,
I upgraded my galaxy S2 to the SFR (France) ICS firmware I9100SFRLP7 by using CheckFusDownloader. It works but unfortunately my mobile is still not recognized by Kies. The message "your device does not support software upgrading via kies" is displayed on the screen.
Phone Info:
PDA: I9100BULPC
PHONE: I9100BULP6
CSC: I9100SFRLP7
Any idea ? If the CSC is not correct, what is the correct one and how to change it ?
Thanks for your help.
larsen82 said:
I gave up upgrading through kies or phone. Rooted my phone and loaded an official rom (4.0.3) on it. Works like a charm
My problem now is restoring apps and data from my Titanum backup.. I have forgotten the Titanum armored passphrase
Click to expand...
Click to collapse
Blessing in disguise..... Restores from GB to ICS is not recommended
Sent from my GT-I9100 using Tapatalk 2
fredsc said:
Hello,
I upgraded my galaxy S2 to the SFR (France) ICS firmware I9100SFRLP7 by using CheckFusDownloader. It works but unfortunately my mobile is still not recognized by Kies. The message "your device does not support software upgrading via kies" is displayed on the screen.
Phone Info:
PDA: I9100BULPC
PHONE: I9100BULP6
CSC: I9100SFRLP7
Any idea ? If the CSC is not correct, what is the correct one and how to change it ?
Thanks for your help.
Click to expand...
Click to collapse
reinstall kies to correct region or flash correct region to phone according to kies
Sent from my GT-I9100 using Tapatalk 2

CSC AUT (switzerland) please help

Hi all,
Sorry for my bad English but I will try to communicate.
I bought a samsung S3 naked in Switzerland.
I flashed a custom rom and then install.
I wanted to return to the original rom that is on the site Samefrimwares
The problem is that on your website, in the CSC section, I did not find the CSC "AUT" of the Swiss rom. I remain blocked on "KOR".
Does anyone by chance have the CSC "AUT" I could flash ? Or should I wait it out?
Thank you in advance for your reply.
nstructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
OK, I do a mistake when I fash fresh stock rom. Forget to full wipe before new Flash.
Hello,
I have the same issues. I try to have my s3 stock.
What I do for that is Flash via odin single file official firmware and csc stay OTA
I also try to install omega firmware and no luck AUT is not inside
Now I try to get AUT file to Flash in cwm recovery
Or somebody can give me official Switzerland firmware in 3 parts?
The firmware and csc I try to have is :
GT-I9300 Galaxy S III
PDA: I9300XXEMG4
CSC: I9300AUTEMG2
MODEM: I9300XXEMG4
Br

how to get back on the kies updates track

Hi there,
I have a phone bought an unlocked phone from Romania, and I've tried various roms and kernels for 1 year.
Now I want to sell my phone to a friend, but he wants to have the device being able to be updated through kies (he doesn't want custom roms, stock will do for him)
The problem is that I can't get it to be recognized by Kies.
What are the prerequisites to make a firmware to be recognized by Kies as an official stock rom, and after that to be able to update the phone via Kies?
I've tried different firmwares from sammobile, but didn't get neither to be Kies compatible, so please help me.
Thanks in advance!
valentinv said:
Hi there,
I have a phone bought an unlocked phone from Romania, and I've tried various roms and kernels for 1 year.
Now I want to sell my phone to a friend, but he wants to have the device being able to be updated through kies (he doesn't want custom roms, stock will do for him)
The problem is that I can't get it to be recognized by Kies.
What are the prerequisites to make a firmware to be recognized by Kies as an official stock rom, and after that to be able to update the phone via Kies?
I've tried different firmwares from sammobile, but didn't get neither to be Kies compatible, so please help me.
Thanks in advance!
Click to expand...
Click to collapse
first, do u know the firmware u had on ur phone when u bought it. since that would be a very usefull info to proceed
second try downloading a firmware from sammobile pertained to Romania flash the same thro ODIN and see
Unfortunatley not, when I've used the phone for myself, I didn't plan to use Kies ever (useless bloatware) and I've flashed so many kernels and roms that I forgot about
Now I can't get it to be an unlocked international version. I will try right now an Orange firmware from sammobile, but I was wondering...do I need to flash a diffrent CSC or stuff like that? I don't know at what Kies looks to validate a phone being eligible for update or not.
Sun90 said:
first, do u know the firmware u had on ur phone when u bought it. since that would be a very usefull info to proceed
second try downloading a firmware from sammobile pertained to Romania flash the same thro ODIN and see
Click to expand...
Click to collapse
valentinv said:
Unfortunatley not, when I've used the phone for myself, I didn't plan to use Kies ever (useless bloatware) and I've flashed so many kernels and roms that I forgot about
Now I can't get it to be an unlocked international version. I will try right now an Orange firmware from sammobile, but I was wondering...do I need to flash a diffrent CSC or stuff like that? I don't know at what Kies loook to validate a phone being eligible for update or not.
Click to expand...
Click to collapse
its the CSC which makes the diff, when KIES tries to recognise the phone
so after flashing any stock rom u can always change the CSC pertained to ur region, so that u will not have issues with KIES
I've flashed an Orange Romania firmware and the *#1234# command returns this:
PDA: I9100BVLPB
PHONE: I91000BVLPB
CSC: unknown
How can I get the correct CSC for Orange Romania? I've understand that its code is named ORO.
Help on this is really appreciated
Sun90 said:
its the CSC which makes the diff, when KIES tries to recognise the phone
so after flashing any stock rom u can always change the CSC pertained to ur region, so that u will not have issues with KIES
Click to expand...
Click to collapse
After reading and trying diffrent firmwares flashed with Odin, I've found that all the files that I've needed pda, kernel, csc were inside the damn filme I've downloaded from sammobile Luckly I also had a linux virtual machine to cread some separate flashable odin packages for each component, pda, kernel and csc. I've learned this from this thread: http://forum.xda-developers.com/showthread.php?t=1082288
Hope this info helps others in my previous situation
Now the phone is recognized by Kies and just updated to the latest firmware available for ORA (although a few reboots and wipe were needed before Kies actually recognized this device)
valentinv said:
I've flashed an Orange Romania firmware and the *#1234# command returns this:
PDA: I9100BVLPB
PHONE: I91000BVLPB
CSC: unknown
How can I get the correct CSC for Orange Romania? I've understand that its code is named ORO.
Help on this is really appreciated
Click to expand...
Click to collapse
The reason why kies is not recognising your device is because the CSC code is unknown.
Use this app to change the CSC code to your country/region : https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Note that the process will wipe your phone so please backup your important data.
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II

[Q] Need some help Unbranded UK S3

Hi all wondering if anyone can help, by telling me wich version of 4.1.2 I can use to reflash my phone.
I am currently running 4.1.1 on an unbranded S3 that I bought from Amazon.
Details are as follows:
AP: I9300XXDLJ4
CP: I9300XXDLID
CSC: Unknown
Would I use the BTU version that is available on Sammobile?
I know how to flash using Odin, but am unsure as to which file I need with my phone being Unbranded. I prefer using Odin so I can factory reset first and start clean with an update.
Thanks in advance
YesEvil said:
Hi all wondering if anyone can help, by telling me wich version of 4.1.2 I can use to reflash my phone.
I am currently running 4.1.1 on an unbranded S3 that I bought from Amazon.
Details are as follows:
AP: I9300XXDLJ4
CP: I9300XXDLID
CSC: Unknown
Would I use the BTU version that is available on Sammobile?
I know how to flash using Odin, but am unsure as to which file I need with my phone being Unbranded. I prefer using Odin so I can factory reset first and start clean with an update.
Thanks in advance
Click to expand...
Click to collapse
Yes use the 4.1.2 BTU version from sammobile.
I9300XXELL4
Your phone will stay unbranded.

Categories

Resources