[Q] Need some help Unbranded UK S3 - Galaxy S III Q&A, Help & Troubleshooting

Hi all wondering if anyone can help, by telling me wich version of 4.1.2 I can use to reflash my phone.
I am currently running 4.1.1 on an unbranded S3 that I bought from Amazon.
Details are as follows:
AP: I9300XXDLJ4
CP: I9300XXDLID
CSC: Unknown
Would I use the BTU version that is available on Sammobile?
I know how to flash using Odin, but am unsure as to which file I need with my phone being Unbranded. I prefer using Odin so I can factory reset first and start clean with an update.
Thanks in advance

YesEvil said:
Hi all wondering if anyone can help, by telling me wich version of 4.1.2 I can use to reflash my phone.
I am currently running 4.1.1 on an unbranded S3 that I bought from Amazon.
Details are as follows:
AP: I9300XXDLJ4
CP: I9300XXDLID
CSC: Unknown
Would I use the BTU version that is available on Sammobile?
I know how to flash using Odin, but am unsure as to which file I need with my phone being Unbranded. I prefer using Odin so I can factory reset first and start clean with an update.
Thanks in advance
Click to expand...
Click to collapse
Yes use the 4.1.2 BTU version from sammobile.
I9300XXELL4
Your phone will stay unbranded.

Related

[Q] CSC issue after ROM upgrade

Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Thanks in advance for your help.
nicolas2011 said:
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
Depends upon what CSC flashed their is no generic CSC .
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
Debranding is not unlocking .
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Kies updates branded phones .
CSC
http://forum.xda-developers.com/showthread.php?t=1075278
Spoof FW
http://forum.xda-developers.com/showthread.php?t=1110160
jje
Click to expand...
Click to collapse
Thanks very much for this info. At the end I did a factory reset after updating and now phone shows XEU as expected.

[Q] GT-I9100 does not support firmware upgrade.

Hello!
I just bought the S2 White, and it's on 2.3.3.
I tried to update the software from phone, but it says, "No new updates".
I connected the phone to KIES (Windows 7 Home Premium x64),
& it says, "GT-I9100 does not support firmware upgrade."
PDA: KE7
PHONE: KE4
CSC: KD1(H3G)
Can someone help me please to update it ???
(I don't understand why KIES says that my phone does not support firmware upgrade :S)
Maybe it has been flashed an unsupported version firmware.
Anyway you can upgrade to any firmware you want throught odin.
Look in the forum for a guide how to flash with odin
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
mustafa.millwala said:
"GT-I9100 does not support firmware upgrade."
PDA: KE7
PHONE: KE4
CSC: KD1(H3G)
Click to expand...
Click to collapse
It says it cannot be updated because your firmware is mixed for some reason, latest H3G is:-
PDA: I9100XWKI4
PHONE: I9100NEKI1
CSC: I9100H3GKI1
faill debrand!!flash again!
Inviato dal mio GT-I9100 usando Tapatalk
I had a similar problem. Then updated Kies and it said that it's not possible to update my firmware!
I went to the thread with the stock firmwares. Chose the current UK 2.3.4 firmware and flashed via Odin. Totally painless and very straightforward. Then checked on my phone for software updates, non available and checked via Kies and says my firmware is up to date.
This seems to have corrected the problem.
People still use Kies?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Odia said:
It says it cannot be updated because your firmware is mixed for some reason, latest H3G is:-
PDA: I9100XWKI4
PHONE: I9100NEKI1
CSC: I9100H3GKI1
Click to expand...
Click to collapse
Just looked through the guides for doing this and I can only seem to see stuff for Vodafone, 3, O2 etc. I've got an unlocked S2 that I think is running out of date software and thought I would try updating manually as Kies is telling me my phone does not support updates lol. Mine is running:
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?
chanandler;18142028
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?[/QUOTE said:
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
OK so I have found the custom ROM for my S2 but what is the point of putting the same one back on there that is already running? The question I had was 'what is the latest version and how do I install that?'
The reason for all this by the way is that I am sick of the poor battery life of the phone and have been told that the latest version of the software improves it but unfortunately Kies seems to think that my phone is not able to be upgraded!
Are you on OS X by any chance?
chanandler said:
Just looked through the guides for doing this and I can only seem to see stuff for Vodafone, 3, O2 etc. I've got an unlocked S2 that I think is running out of date software and thought I would try updating manually as Kies is telling me my phone does not support updates lol. Mine is running:
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?
Click to expand...
Click to collapse
Your versions are valid XWKF3 XEU, and it should update to:-
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100XEUKH2
If Kies says it cannot be updated your product code is probably wrong.
Hello,
Kies give me the same message "GT-I9100 does not support firmware upgrade."
and shows these versions on my S2,
PDA: KF3
PHONE: KE4
CSC: KF3(INU)
It shows the same as the latest firmware versions just below.
Does anyone know when these above versions were released ?
lol I know its possible to update, but whats wrong with kies
scottishlad80 said:
People still use Kies?
Click to expand...
Click to collapse
I always use Odin to flash firmwares, but on one occasion I used Kies
but that takes too long
Won't be doing that again in a rush!

[Q] CSC question

Hi all like many I am waiting for the Official BTU update however after checking I am sure I am running on the correct stock ROM for UK. I am trying to get to a position where I have the latest unbranded ICS 4.0.4 so when the 4.1.1 BTU version is released I can update OTA
Could someone please help? My results from *#1234# are posted below
AP : I9300XXBLG8
CP : I9300XXLH1
CSC: I9300OXABLG8
Anyone?
That is the stock UK non branded rom which is correct at present the same as I have
Thank you I woulda clicked the thanks button but on my phone. Can't see why they don't have it on the app
Sent from my GT-I9300 using xda premium

CSC

Hello,
i just got my Sgs3 and i flashed the latest official firmware from here: http://forum.xda-developers.com/showthread.php?t=1646610
also rooted and flashed CWM.
I would like to change my CSC but all CSCs included in the rom are meant for Asia.
Where can i download the EUR csc ?
Then i guess the process remains the same : flash via odin and it will wipe my device.
My phone had these before flashing:
ap: i9300xxella
cp: i9300bolk3
csc: i9300cosll1
Thanks in advance.

return to all stock?

hi guys i want to return to all stock. i have found good tutorials in the forum and found all the firmwares. i am in the UK. i used galaxy_simunlock from the market and network unlocked the phone some time ago. i was hoping someone could tell me where to find a S2 unbranded JB stock rom.
The one i have downloaded is:
Firmware Version Info:
I9100XWLSW
(PDA: CSC: MODEM: CHANGELIST: 1211311 BUILD DATE: 16.05.2013)
http://samsung-updates.com/device/?id=GT-I9100
can anyone tell me if this one is fine and will work in the UK and is unbranded, also will flashing stock undo my network unlock?
thanks
Yes that firmware is OK to flash.
I guess you are rooted ATM.
Get mobile Odin from play and triangle away also from play. Reset counter with triangle away and then flash the firmware through mobile Odin and untick everoot. Once done you're phone will be bk to stock carrier free. Don't forget to bk up any data you want to keep. Or use PC Odin.

Categories

Resources