Related
Hi there... I bought my T-Mobile Touch Plus from UK a year ago, and have been trying to follow this forum ever since... but have had trouble understanding most of it, due to my limited understand of hardspls, roms, and all that stuff.
The phone has been very disappointing, as I had a much faster and reliable experience on my Magician.
Been to lazy to do anything about it until now...
My phone is still 100% stock standard from T-Mobile UK and its model is a NIKI200.
Can someone tell me what I need to do to make it a half decent phone?
I have also tried to get the official 6.1 OS update... but have been unable to due to my serial number not being right or something. Will it matter if I try upgrading it anyway with those files?
Thanks
soggybiscuit said:
Hi there... I bought my T-Mobile Touch Plus from UK a year ago, and have been trying to follow this forum ever since... but have had trouble understanding most of it, due to my limited understand of hardspls, roms, and all that stuff.
The phone has been very disappointing, as I had a much faster and reliable experience on my Magician.
Been to lazy to do anything about it until now...
My phone is still 100% stock standard from T-Mobile UK and its model is a NIKI200.
Can someone tell me what I need to do to make it a half decent phone?
I have also tried to get the official 6.1 OS update... but have been unable to due to my serial number not being right or something. Will it matter if I try upgrading it anyway with those files?
Thanks
Click to expand...
Click to collapse
1. download the spl files (flash-uspl-niki.zip & sspl-1.16-nike).
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the USPL by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the uspl the phone will reboot
10. after that you can flash the new HTC rom update.
Download the HTC rom update from the following location:
http://www.megaupload.com/?d=MX5GHOXC
http://www.filefactory.com/file/a00...831_3_Radio_NikeMR_1_65_29_22_signed_Ship_exe
http://rapidshare.de/files/41219609..._Radio_NikeMR_1.65.29.22_signed_Ship.exe.html
THANKS!! I will give it a go!
Seems a lot better now thanks!
Does that take the network unlock away as well?
Can I now try flashing most of the NIKI100 or NIKI200 roms onto it?
Hello everyone,
i've been reading this forum for one month,
It was the day I decided to upgrade my HTC HD2, and someone disconnected the usb cable during the process.
Don't talk to me about that ;-)
The problem is I can't flash any rom radio into the phone.
OS ROMS work.
I read carefully a lot of posts here, I can say I have exactly the same problems as _Juster_ from this post :
forum.xda-developers.com/showthread.php?t=618084
My phone is a french HTC HD2, Orange branded.
I successfully installed HSPL 2.08
Making upgrades using USB is very difficult, it is very unstable (communication errors, no response from the phone....) .
I tried on windows 7 pro and win xp sp3 and it is the same.
I then created a goldcard, that I'm using to flash directly in the phone. It is stable, but when flashing a radio rom I always get the "ERROR 00018003, RSA FAIL error".
I learned from xda that the issue can be solved by flashing the original stock radio rom from Orange.
I downloaded a lot of shipped roms from Orange, or HTC.
Always RSA_FAIL.
I'm maybe doing something wrong, or this is a hardware problem....
a few questions for you folks :
1/ It seems that the original Orange stock rom is a 1.43
Must I have the 1.42 HSPL to flash it ?
Is the version of your HSPL important, when you want to flash a rom ? can I flash whatever rom with any HSPL ?
2/ using a Glodcard with HSPL already installed.
when you enter on the bootloader (vol down + power) you arrive on the HSPL tri color screen, displaying HSPL 2.08....
Are you sure the Goldcard is being used ?
How to be sure of that ?
I think (I may be wrong) when you enter the bootloader mode You are on HSPL mode.
What I do to enter the goldcard mode :
I just press power,
I have a "Software update failed message"
Then I arrive to the "Loading..." message
With the name of the ROM i'm trying to flash
LEOIMG.nbh
RADIO V2
Press power to start update
Am I right ?
Thanks for reading this and helping me.
is there other Tasks like task 29 you are aware of ?
Task 29 formats the phone ?
is there a way to partition the phone or to diagnose if there's a problem ?
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Robinmasters said:
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Click to expand...
Click to collapse
take a look at this thread, it might help
http://forum.xda-developers.com/showthread.php?t=621930
Thanks for the answers.
R3dox said:
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Click to expand...
Click to collapse
I already flashed 22 radio roms and a dozen of full roms (os + radio) using SD CARD.
As the usb is very unstable I'm using the sd card method to flash, which is also a goldcard.
the problem is I ALWAYS get the RSA FAIL message (error 00018003) at the end of the radio flashing process.
This guy : forum.xda-developers.com/showthread.php?t=618084
had the same problem but with un unbranded phone and had it solved by flashing a cooked rom he randomly choosed.
To understand the situation,
my phone is an Orange branded one, what is the difference between a branded and an unbranded phone, assuming they both have the same HSPL ?
thx
Just sold my HD2.
Seems like some questions don't have answers....
what was the problem? íf i understand you right, it even worked..but you couldnt flash another radio...
why dont you use it further?
DN41
The phone wasn't able to boot
It was stuck at the white HTC logo,
After the failure of a radio flash, I was not able to flash it again. (RSA FAIL)
I read all the posts about this problem in xda, tried everything, nothing worked.
sorry...
so who bought it? how much did you get?
someone who needed a new lcd or so?
DN41
150€ , it was in a very good condition
RSA FAIL
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
i've same problem, anybody know how to solve this problem?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
You don't just rename the whole update,you extract the ruu_signed.nbh file and rename that.
RSA FAIL
I had the same problem with my polaris (htc touch cruise - pola160). I managed to get rid of the problem by downgrading the radio rom.
I couldn't find my old one, but I was able to find the highest version older than my old one in the forum. So I first downgraded the radio using the sd card, after that the rom I was trying to install in the first place worked.
Thx to pcarvalho for this "fix" : http://forum.xda-developers.com/showpost.php?p=3645124&postcount=1 - the "Important Note:" section (always read the small print ).
Hope this helpes.
PS: Sorry if this is too late for some...
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
Fz.hary said:
i've same problem, anybody know how to solve this problem?
Click to expand...
Click to collapse
jasonlee90210 said:
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
Click to expand...
Click to collapse
Put the back of the phone in front of an AC in cold for 5 minutes, and keeping it always in front of the AC try to install.
If you are able to do that, send it back to the warranty.
Hello,
I have the same problem!
long time ago I had HTC devices, but few days ago I bought HD2 and it was installed android. Is unable to start or when they try to load a ROM eror occurs.
phone has only a white scrin.
error occurs mostly when upgrade Radio ver. I somehow managed NRGZ image but again not boot system.
Task 29 also comes to 19% and stops with the error.
I have a feeling that the real problem is the radio version. (00,018,003 Radio Fail)
I do not know what is the original ROM.
IMEI: 3526 6604 8712 295
SPL 2.08.HSPL
any help came good
Hi all. Just wanted to let everyone know: NEVER GIVE UP. I task2a my htc leo twice (different times) and "BRICKED" it in that I could not flash any rom back to it. It has HSPL3 and trying everything including removing HSPL and going back to SSPL (HSPL 2.08.0000) I got nowhere. NO ship/stock or custom roms would flash at all by USB and when done by LEOIMG.NBH I'd get RADIO_V2 RSA FAIL etc. I tried using the various RUU executable: Romupdateutility.exe, CustomRUU.exe, ruu.exe (dexter series), and still had problems. I never lost HSPL or bootloader however... In the end I solved it like this:
1) CRITICAL YOU HAVE A FULL BATTERY FIRST AND FOREMOST ELSE IT DOESNT WORK OR UPDATE AT ALL. USE EXTERNAL CHARGER/OTER PHONE.
2) I connected by MTTY and re-did Task 2a, and a Task 28, Task 28 55 aa, and then a task 29.
3) I kept trying various different LEOIMG.NBH files including RADIOs, Custom roms with only OS.NB inside, etc etc etc.
4) In the END:
You will have to use your LEOIMG.NBH on <4gb SD CARD from the STOCK default rom the phone came with....
But: It will probably not (for some reason) work first TEN or so times !!! (weird?)
I kept trying doing ruu.exe in between each SD card attempt and also kept removing/swapping HSPL/2.08.0000 and going in and out of MTTY doing 2a, 28, and 29 OVER AND OVER AND OVER. Ultimately I know this is confusing (my explanation) but I am simpy saying my leo was gone and I did not give up so DO NOT GIVE UP. I sat there 12 hours+ doing this over and over and GOT IT BACK TWICE NOW (yes - I did 2a task twice for certain reasons)... USEFUL ROMS/APPS:
Task29.exe (containg single checksum-ok but BLANK - ruu_signed.nbh)
Telstra Stock ROM
Telstra (HTC website) signed update ROM.
Latest LEO radio
Dexter-with CHT2 and companion ruu.exe (used with dexter and other .nbh)
Xanny-Tech-Evolution via SD Card.
HSPL3_PKG.EXE
magldr 1.11 (by RUU and SD).
In the end YOU WILL FIX IT OK. I'm pretty tired now so I will go over this and clean it up later but KEEP PERSISTING AND HAVE FAITH: if you have HSPL and MTTY and SD you can and you will fix it.
---
edit:
OK, after stock telstra LEOIMG.NBH ok... wanted magldr back... did hspl3... fine... then did Task29.EXE(for radio rom 2.08 576 ram ok) by the EXE/RUU: DO NOT DO THIS... it fails and you have to start again:
after task29.exe (radio 2.08 not-MTTY) with FAILURE - I put the ruu_signd.nbh for this onto SD card and flash - fine. Then did MAGLDR.NBH the same (LEOIMG.NBH) and all OK. Then clockwork and update.zip for PPC-Windows7-Android.
----
Thanks DFT and Cotulla.
Hurry up and release NAND WP6 and WP7 NAND boot
Making donation $.
Cool that it works for you. But the steps in your description does not give me enough confidence that it will work for anyone else.
Or maybe someone else can verify this method?
Nice!
This was very inspiring! I hope it does work for everyone. As for me I did try for the nth time and well no luck for me, tried a lot of variations, roms, task29, radios but still unsuccessful. Guess for me customer service is the only way. Good luck to the others!
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
shah_vm said:
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
Click to expand...
Click to collapse
Just send it through tmo repair center, its gonna cost $120-$170
Hi guys, i'm stuck on:
PB81100 HX-BC
SPL-2.0.8.HSPL 8G XE
RIFFBOX 0x05
and white screen without htc logo, can i solve this? or it is bricked up?
Thanks in advance
the same here
I got out of bricked situation by extracting only the SPL file from the stock rom using OS builder.Renamed it leoimg.nbh and flashed it using SD card 2 GB /sandisk/.It appeared stuck on the "loading" screen and I had to remove the battery not sure if I'd succeeded.The first sign that something might have gone right was the green light showing fully charged battery,cause despite "common sense" I put the battery back in and put the phone to charge.After taht I used the RUU_signed file from the same stock rom I took the SPL from.
i must try harder...
i spend already to much hour on this pr ...i dont give up
i connect MTTY via USB button in win 7 i make this command task 2a , task 28 ,29
i want to find a STOCK ROM for my phone but i can't find a good one CID is HTC___001
i need a GOLD card i think... to unlock
after i make the info 8 cmd in MTTY window last line say OS not FOUND ...
Ok, half bricked it while trying to update SPL to 2.05 with goldcard...
I understand that a half brick is when you hold both volume buttons down on boot and neither serial nor usb show up in the spl screen. Between this and my inability to flash the SPL 2.05 (gets stuck at "Loading..." and takes several minutes to even get past "Load USB Host". I've left it at "Loading..." for an hour, no progess...)... I'm stuck and need help.
When I hold the volume down button at boot and connect to Zune, I get this error: c101002e
I've read that this can be solved with the windows phone support tools... but MS's page also says not to use this on versions higher than 7.0.7something. Unfortunately I forced the update to 8107, so I don't want to find out what happens when you ignore the warning.
Basically everything is stock ATT except the forced update;
Radio:16.23.02.26_A_16.27.00.23U
SPL 1.10
Is there anything I can do to fix this? Please help
Update 1;
Tried to flash the SPL2.6 update from HTC using goldcard, no dice, gets stuck at "Loading..."
Tried to flash the Eternity cingular stock rom, once again, stuck at "Loading..."
I think I'm beginning to see a pattern; USB host works as far as reading the SD card, but beyond that it fails...
Update 2;
I wonder if I can reapply the firmware through cab sender? I would need firmware cabs for the htc titan, preferably ones that are compatible with the new hspl! I can't find any, been searching for hours...
Was the HSPL process successfully completed? Have you tried to put the phone back into USB com mode (camera + vol down + power) and putting the OSPL back on?
You're the first I've heard having this problem. Since you're using the Gold Card Method, I assume that your phone is a US AT&T Titan.
I hope you get it going.
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
Not sure if you visited this page or not, but here are the instructions for flashing the HSPL. Further down the 1st post you'll find how to un-install it. I would try that since it doesn't sound as if your flash was successful.
Here is the link to the actual gold card method, if you haven't seen that as well.
No, didn't even get to HSPL. The instructions say to flash SPL 2.05 first, which isn't working. I'm stuck on the stock 1.10 SPL.
No matter what I try, any combination of flashing the original stock ROM, the HTC SPL update, etc, goldcard always gets stuck at "Loading..." so I think it's safe to say goldcard is broken as well, unless someone knows a foolproof fix.
Camera + Volume Down + Power... I assume you mean USB Host mode which is just Camera + Volume Down at bootup (holding the power button causes the phone to reboot). USB Host mode is how you use gold card, and like I said, it gets stuck at "Loading...". It does in fact read my SD cards because I saw the blinking LED that signals activity on one of the USB to microSD readers I tried.
Moreover there is nothing to uninstall since I am unable to install anything. I can use the WP7 cab sender, if I could just get the bootloader in cab form I think this would solve my problems; I think the stock SPL became corrupted somehow and needs to be reflashed... and I do not know anything about JTAG
When you made your Gold Card, did it say success or give you a problem?
Are you using a multi card reader or a single card reader for your gold card?
it says success.
I've tried two microSD cards, and three different card readers. I have gotten the CID for each card and properly applied the CID to each card, and properly formatted each in fat32 several times...
I've tried using the HD2 in Magldr usb mass storage mode, HD2 in android mass storage mode, HD2 in windows mobile mass storage mode... they all appear to work as it gets as far as "Loading..."
Moreover I have a single card reader and a multi card reader.. each making no difference; stuck at "Loading..."
I have tried a hundred different combinations which all appear to be successful if not for the fact that I'm pretty sure my SPL is corrupted.
Wow, that really sucks! Sorry I can't help. I haven't even done it myself yet. My y-cable will be here hopefully Friday.
The only other thing I would make sure of if I were in your situation is looking at the pics in gold card method post, I see that the gold card is to be placed in the female end at the bottom of the Y. You never said whether you made your own cables or not, but if you did, maybe make certain that it is correctly done.
Damn, while I'm sorry for your situation, I sure hope that I'm not right there with ya when I attempt it. Keep us up-to-date and good luck.
Yeah I bought a new Titan off ebay already XD
However before I open it I'm going to see if I can convince HTC that it was pre existing (it probably was) and that I found out while I was trying to do the official SPL update from HTC using the tool on HTC's site (which is more or less true as well XD). I think I'm still under warranty.
And I was using this Y cable http://www.amazon.com/gp/product/B000JIOHDE/ref=oh_details_o03_s00_i01
It works, I've tried it in various setups. It's actually really nice; the grey cable doesn't carry data so you can use your computer or laptop for power without worry. But I did in fact use a wall USB charger for goldcard, just in case.
But don't worry, I'm almost sure that this was pre existing; gold card/USB host mode behaved exactly the same from the start, the only thing that has changed is the fact that I can't get Serial / USB connections to show up in SPL anymore (nor can I hard reset from SPL). It worked correctly at least twice...
hey everyone, I fixed it.
USB host mode / gold card works; if you're stuck at "Loading" then your SD card is no good. I went around and tried every mass storage device in my house and found one that works, use the generic goldcard image from here http://forum.xda-developers.com/showthread.php?p=24809318#post24809318
To get rid of f400 error you need to flash cotulla's ROM, the cingular stock rom did not fix it.
Goldcard SPL up to 2.05, USB worked.
Install HSPL via USB, if that doesn't work, install the stock ROM via USB and start over.
Once HSPL'd at 2.05 USB will NOT work, so you'll need to goldcard cotulla's ROM (remember to rename it from FINAL.nbh to ETERIMG.nbh)
profit.
link68759 said:
hey everyone, I fixed it.
USB host mode / gold card works; if you're stuck at "Loading" then your SD card is no good. I went around and tried every mass storage device in my house and found one that works, use the generic goldcard image from here http://forum.xda-developers.com/showthread.php?p=24809318#post24809318
To get rid of f400 error you need to flash cotulla's ROM, the cingular stock rom did not fix it.
Goldcard SPL up to 2.05, USB worked.
Install HSPL via USB, if that doesn't work, install the stock ROM via USB and start over.
Once HSPL'd at 2.05 USB will NOT work, so you'll need to goldcard cotulla's ROM (remember to rename it from FINAL.nbh to ETERIMG.nbh)
profit.
Click to expand...
Click to collapse
Hi, I'm stuck with f400, running official eu rom with spl 2.5 . no HSPL , no downgrade , no nothing...
Which cotulla's rom are you reffering to?
Please help. (ATT HTC Titan)
spyros_tazz said:
Hi, I'm stuck with f400, running official eu rom with spl 2.5 . no HSPL , no downgrade , no nothing...
Which cotulla's rom are you reffering to?
Please help. (ATT HTC Titan)
Click to expand...
Click to collapse
It's been months since anybody has posted on this thread. There are two ROMs that set this process up. Depending on whether you have the x310a (American brand) or x310e (European). When this process is all said and done it reads x310e regardless where it came from. There is a Cingular 1.09 and an European 1.10...the key here is to downgrade the SPL from 2.05 to 1.09/1.10. Some Titans have lower SPLs depending where you're at. HTC's SPL update to 2.6 complicates this process. Think of as 3 major steps...one, downgrade to one of these ROMs, two, return to SPL205 via Goldcard and then apply DFT's HSPL. Step 2 took me forever to get right and the process is sneaky long...you think you failed but patience will be rewarded. There has been quite a lot of discussion in regards to "newer" Titan (Eternity) which the internal drive is set up in such a way that one is lead to believe it is corrupted or they've been setup like the Titan II (Radiant) which to date remains impossible to HSPL. You're better off using one of the older Titans (Eternity). A few of the links no longer get you the files you need and if they do I would encourage you to download everything that is there and read every tutorial carefully and then again; this isn't for the faint of heart. It's way, way harder than the HD2 or older HTC devices. Nor am I aware any device since the Eternities is HSPL capable other than maybe the Nokia Lumia 920 Developer Edition.
berrywr said:
It's been months since anybody has posted on this thread. There are two ROMs that set this process up. Depending on whether you have the x310a (American brand) or x310e (European). When this process is all said and done it reads x310e regardless where it came from. There is a Cingular 1.09 and an European 1.10...the key here is to downgrade the SPL from 2.05 to 1.09/1.10. Some Titans have lower SPLs depending where you're at. HTC's SPL update to 2.6 complicates this process. Think of as 3 major steps...one, downgrade to one of these ROMs, two, return to SPL205 via Goldcard and then apply DFT's HSPL. Step 2 took me forever to get right and the process is sneaky long...you think you failed but patience will be rewarded. There has been quite a lot of discussion in regards to "newer" Titan (Eternity) which the internal drive is set up in such a way that one is lead to believe it is corrupted or they've been setup like the Titan II (Radiant) which to date remains impossible to HSPL. You're better off using one of the older Titans (Eternity). A few of the links no longer get you the files you need and if they do I would encourage you to download everything that is there and read every tutorial carefully and then again; this isn't for the faint of heart. It's way, way harder than the HD2 or older HTC devices. Nor am I aware any device since the Eternities is HSPL capable other than maybe the Nokia Lumia 920 Developer Edition.
Click to expand...
Click to collapse
i managed to downgrade to official att rom,and got rid of f400 error, but the spl didn't downgrade...
I installed the rom 3 times with no luck with the spl...
Afterwards i renamed the eu rom from ETERNIMG to ETERDIAG and it installed.
but still the spl is :
PI39100 MFG
SPL-2.5.160015.3(137079)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1,V11,B:F8)
Radio-16.23.02.09_A
I tried to install spl2.05 again (I don't remember but I think it failed), then spl2.6 with no luck, then hspl without results...
Finally I upgraded to 7.8 via cab installer and thats the best I managed to accomplish...
So I can't install any spl or hspl...
when I bought the device ,it had spl 1.09, not 2.6, so I think it's possible to hspl...
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain