Related
I am about to hard spl my g4 8125 how do i re lock it in case i have to send it back
dharvey4651 wrote a tutorial for removing the Hard SPL
2 late i got a nice fancy paperweight
We can't say we didn't warn you about upgrading!
its all good i didnt do anythig stupid if ur wonderin
abc12345 said:
its all good i didnt do anythig stupid if ur wonderin
Click to expand...
Click to collapse
I hate seeing paperweights, you have my sympathies
What happened if I may ask?
i was trying to flash back to cing default and it stopped in middle of process and said comm error and it didnt start back up who should i send it back to because i had it exactly one week that is a new brick record
im just praying that when i send it back att doesnt charge me
sad right?
abc12345 said:
i was trying to flash back to cing default and it stopped in middle of process and said comm error and it didnt start back up who should i send it back to because i had it exactly one week that is a new brick record
im just praying that when i send it back att doesnt charge me
sad right?
Click to expand...
Click to collapse
Bummer, comm error in the middle of the process
No three colored screen from which you can work from?
as long as you have three coloured screen, there is a chance to save it..
nope no boot screen
abc12345 said:
nope no boot screen
Click to expand...
Click to collapse
Then, sadly (if the battery is still full) it's a brick..
Bootloaders are being flashed in the first minute or so, so if something goes pear-shaped approx halfway of flashing, only the OS is affected.
Then you can revive the device by flashing while in bootloader.
But since you even haven't got a bootloader, things look bad.
Hey all
i just dit my radio update on my hero and i forget with radio it was but is was for the hero.
now the only thing my hero does is box with arrow for like 4 sec and then it tearns black.....
there is a video on youtube that shows the problem the video is called HTC HERO BRIK by user pcaraujo
sorry cant put link in here XDA wont allow it :S spamming controle
nothing works all the key combo's dont work can;t get in to recovery
the only thing it does is when i power it on with the volume rocker up it will vibrate 3 times and blackscreen with the green led burning
i read a ton of topics about this but found no awnser please help me!
Thanks
Shiva
shivatraaman said:
Hey all
i just dit my radio update on my hero and i forget with radio it was but is was for the hero.
now the only thing my hero does is box with arrow for like 4 sec and then it tearns black.....
there is a video on youtube that shows the problem the video is called HTC HERO BRIK by user pcaraujo
sorry cant put link in here XDA wont allow it :S spamming controle
nothing works all the key combo's dont work can;t get in to recovery
the only thing it does is when i power it on with the volume rocker up it will vibrate 3 times and blackscreen with the green led burning
i read a ton of topics about this but found no awnser please help me!
Thanks
Shiva
Click to expand...
Click to collapse
Anything if you hold Vol. down and Power?
if not, you're out of luck, I think
if i send it back to where i bought it would they see is was rooted or not?
cos i bouhgt is lik 3 monts ago so there is still warenty
anon2122 said:
hold Vol. down and Power
Click to expand...
Click to collapse
What should it do? I somewhere a list of those debug boot combinations?
shivatraaman said:
Hey all
i just dit my radio update on my hero and i forget with radio it was but is was for the hero.
now the only thing my hero does is box with arrow for like 4 sec and then it tearns black.....
there is a video on youtube that shows the problem the video is called HTC HERO BRIK by user pcaraujo
sorry cant put link in here XDA wont allow it :S spamming controle
nothing works all the key combo's dont work can;t get in to recovery
the only thing it does is when i power it on with the volume rocker up it will vibrate 3 times and blackscreen with the green led burning
i read a ton of topics about this but found no awnser please help me!
Thanks
Shiva
Click to expand...
Click to collapse
There are 2 types of radios, 1 for CDMA (Americas) and 1 for GSM (rest of world) if you chose the wrong one, BAD TIMES..... but you should really have researched before flashing
oke its official! i will never root another android mob again!!!!!!!!!
my hero was bricked well now my g1 is to !!!
2 mobiles on one night!!
i think god is trying to ruin me
but i will send my hero to htc for repair thats 50 bucks
and my g1 wil be sold for parts so thats the story or if any one have a salution please say so
The hero is almost impossible to brick fully so if you have done it twice in one night then you are seriously doing something wrong.
Tell us exactly what you have done and we might be able to help you.
... and so the rest of us know what NOT to do?.....
Pitel said:
What should it do? I somewhere a list of those debug boot combinations?
Click to expand...
Click to collapse
Take a look here http://forum.xda-developers.com/showthread.php?t=559806
Try flashing a stock rom... it alsways seems to work for me...
after that you can always reroot your phone..
Ps. is you phone still rootet?
If so you can enable usb-ms toggle and put a different radio on you sd, and flash from there??
he can't flash anything anymore since he didn't even know what he did
he ****ed up his hero with a probably not for gsm phone radio
Any Body Recomend a good repair Place i have Bricked my Hero after flashing radio
Will Not power on know ..
Thanks
Guys, this is the DEVELOPMENT section, not the Q & A!
i'm just getting tired of people posting in development. why can't people use the right sections!!!
as for your help, try download the RUU file from htc's suport. if you have sync'd your phone with htc sync before, try running the ruu file and see if it boots into fastboot and tries re-flash your phone to factory settings
El_Nino9 said:
as for your help, try download the RUU file from htc's suport. if you have sync'd your phone with htc sync before, try running the ruu file and see if it boots into fastboot and tries re-flash your phone to factory settings
Click to expand...
Click to collapse
if it doesn't power up at all the RUU won't be of any help... and the thread was moved already.
bigguy said:
Any Body Recomend a good repair Place i have Bricked my Hero after flashing radio
Will Not power on know ..
Thanks
Click to expand...
Click to collapse
there is a really good place, go out your door, make a left turn, then go down the street to the next crossing, it is the third house on the left after you make a right turn...
you notice something? you didn't even tell us the country you live in, you want me to suggest my local phones dealer here in germany?
kendong2 said:
you notice something? you didn't even tell us the country you live in, you want me to suggest my local phones dealer here in germany?
Click to expand...
Click to collapse
LOL, nicely put
sorry about stating it was in the wrong section. it was under development section at the time i send the post.
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
That sounds Bad ...
Sorry pal, you have a serious problem. The .51 radio is the culprit. I'm afraid you will have to search this out, but I am unaware of any solutions.
Good luck. Warranty?
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Somebody on this forum already reported about similar problem. I don't remember whether the solution was found.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Why do people not read, you CANNOT FLASH A .51 RADIO ON A T-MOBILE DEVICE. LEARN TO READ AND THIS WON'T HAPPEN.
uniqs said:
Somebody on this forum already reported about similar problem. I don't remember whether the solution was found.
Click to expand...
Click to collapse
Somebody? lol, quite a few people are in that boat actually.
@jswllms3
Try searching for Jtag or .51 radio brick. And maybe post in this thread
warranty will be ok so long as you dont mention flashing.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
How Cute
You flashed a 2.07.51 radio ! ! !
Take your phone back for warranty and never flash a .51 radio again as every one else saying...
Good luck with it.
ok. lol. so its abrick. ill search a little more butthe strange thing is, when i plug it in via usb to my comp it still shows that its searching for new hardware.. i dont think its a total loss. i have the odd feeling i can revive it. but in any case, how do i turn it in for a warranty and what would i say? lol.
jswllms3 said:
ok. lol. so its abrick. ill search a little more butthe strange thing is, when i plug it in via usb to my comp it still shows that its searching for new hardware.. i dont think its a total loss. i have the odd feeling i can revive it. but in any case, how do i turn it in for a warranty and what would i say? lol.
Click to expand...
Click to collapse
You say. I don't know what happen. I was charging it over night...and when I work up it was off. I turn it on and nothing happens.
what i meant to say is, im guessing i turn it into htc for the warranty, but other then flash custm roms and different radios, what other excuse would they take? i mean, they have ways of finding out right?
Maybe HELP YOU
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
I don't know if I can help you But you can enter in bootloader mode and via usb cable connect to your computer? If you can...and have Bepe&Cotulla HARDSPL3... Do a Task29 and when near 100% push volume down to stay in bootloader mode... then... Flash a radio 50 (my sig have a link to my current radio)... and without exit bootloader mode (when near 100% push volume down) Flash a ROM you want in your device...
Sorry... I only try help you... maybe don't have luck or... many luck
ddgarcia05 said:
You say. I don't know what happen. I was charging it over night...and when I work up it was off. I turn it on and nothing happens.
Click to expand...
Click to collapse
Say this ^^^^
Fidalgos said:
I don't know if I can help you But you can enter in bootloader mode and via usb cable connect to your computer? If you can...and have Bepe&Cotulla HARDSPL3... Do a Task29 and when near 100% push volume down to stay in bootloader mode... then... Flash a radio 50 (my sig have a link to my current radio)... and without exit bootloader mode (when near 100% push volume down) Flash a ROM you want in your device...
Sorry... I only try help you... maybe don't have luck or... many luck
Click to expand...
Click to collapse
no. it will not enter bootloader or anything. wont connect via activesync nothing. tried a hard reset, soft reset. every type of reset. nothing works. tried bootloader and.. NOTHING!!!! ah.. but its bugging me out that its trying to install new device driver. i feel like i can fix it... if christ was real i would pray to him!!!!
if you read the dozens of other people that did this, you will see they all say the pc looks for drivers for "qualcomm blah blah blah". don't kid yourself, its gone.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Simple: The .51 radio raped your TMOUS's internals. It will never work again. Play dumb with the warranty people.
haaahha! so i called the warranty people and told them it was dead. asked a few questions, specifically: "what voids the warranty and why would i be charged for any repairs?" i got a number of answers including, "flashing a new os, rom or radio." hahahaha!!! so essentially, im f**ked, right? i mean this is htc, how could they not find out?
so ive read part of three threads where everyone is stating that as long as they cannot get it to go into bootloader, they cannot charge me and theyll repair my phone or send me a new one. though i am worried that i havent read anything about any phones coming back to the peoples having this problem.. i dont have insurance through tmobile so im assuming i cant send it back to them, i am however still under the year manufacturers warranty provided by htc. does it matter who i send it to? and has anyone had experience with this particular problem that can acclaim to or deny me the assurance of me getting my phone back? lol.
Do not lie, as that could bite you in ways you don't want to deal with; as in fraud, etc. Our phones are around $550, a retainer for an Attorney to defend you against criminal charges would be a lot more.
I would go into tmobile, and when you go into store you simply tell them the truth that the phone doesn't work.
Definitely a drag that you bricked the phone. Could have been me, probably will be someday when I get too eager or careless.
Anyhow, let us know what happens.
jswllms3 said:
so ive read part of three threads where everyone is stating that as long as they cannot get it to go into bootloader, they cannot charge me and theyll repair my phone or send me a new one. though i am worried that i havent read anything about any phones coming back to the peoples having this problem.. i dont have insurance through tmobile so im assuming i cant send it back to them, i am however still under the year manufacturers warranty provided by htc. does it matter who i send it to? and has anyone had experience with this particular problem that can acclaim to or deny me the assurance of me getting my phone back? lol.
Click to expand...
Click to collapse
well for a start this is the regular hd2 section, have you read any of the posts in the tmous section? (Well, no, else you would have seen the myrriad warnings about flashing ..51.. radios )
Loads of people have had them repaired after this type of brick, and the only people that haven't have been those that confessed to flashing.
And no, just because it is HTC, they cant see into a broken bootloader. The best they can do is JTAG the phone, and that flashes a new bootloader anyway, wiping out any trace of what you did.
Alright so long story short I tried to rush through rooting my new phone here without checking everything out too much (complete fail on my part...but I wanted it rooted before I went out to the bars to save some battery life haha...ironic, now I'll have no phone tonight).
I went to root it and it somehow got screwed up...the sense launcher wasn't showing up along with the fact that when I pulled down the notification bar and hit settings, it crashed, so I went to unroot it with the RUU 1.13.651.1 and when I got to the comparison screen it said I had 1.13.651.1_R2...and being already frustraited at this point, decided how worse could it get? Tried it out, not my brand new phone is stuck at the black htc screen....fail.
Anyone have any suggestions on what to do? I tried running it again to no avail...I'm about to try the other RUU to just see if it works, but I'm running out of other ideas. Anyone that can help, it would be greatly appreciated.
Thanks!
awesome first post and congrats on your new paperweight
How do you brick a phone using one click root?
shook187 said:
How do you brick a phone using one click root?
Click to expand...
Click to collapse
Sent from my EVO using xda premium
just smashed on the floor and go the Sprint store and pay $100.00 with the insurance.
But, how did you bricked? is only one click!!
shook187 said:
How do you brick a phone using one click root?
Click to expand...
Click to collapse
sorry i dont mean to laugh
but hahahahaha lol
i couldnt help it lol
one click root bricking. im sorry man
tough luck and congrats on your first post
will it turn on, what can you get it to do?... geez guy at least attempt to help evern though this was an idiot move to rush thru it...
he could try to unlock his bootloader, manually flash the recovery and flash a rom thru there ^_^
but since he even failed at one click root, how will he do all that?
can u get to the bootloader?
does ur comp recognize it when u plug it in? even if it's still stuck
flex360 said:
he could try to unlock his bootloader, manually flash the recovery and flash a rom thru there ^_^
but since he even failed at one click root, how will he do all that?
Click to expand...
Click to collapse
Not that hard if he actually takes his time and reads before doing anything. If he can unlock the bootloader with htcdev and flash a recovery he should be ok
Albaholic said:
Not that hard if he actually takes his time and reads before doing anything. If he can unlock the bootloader with htcdev and flash a recovery he should be ok
Click to expand...
Click to collapse
you quoted me and repeated the same thing i said lol
Easy. Hold the volume buttons down while you turn the phone on then choose to reformat or restore or whatever the option is.
Sent from my EVO using xda premium
Weird, my HTC screen is white
Sent from my EVO using xda premium
HixVAC said:
Alright so long story short I tried to rush through rooting my new phone here without checking everything out too much (complete fail on my part...but I wanted it rooted before I went out to the bars to save some battery life haha...ironic, now I'll have no phone tonight).
I went to root it and it somehow got screwed up...the sense launcher wasn't showing up along with the fact that when I pulled down the notification bar and hit settings, it crashed, so I went to unroot it with the RUU 1.13.651.1 and when I got to the comparison screen it said I had 1.13.651.1_R2...and being already frustraited at this point, decided how worse could it get? Tried it out, not my brand new phone is stuck at the black htc screen....fail.
Anyone have any suggestions on what to do? I tried running it again to no avail...I'm about to try the other RUU to just see if it works, but I'm running out of other ideas. Anyone that can help, it would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Well, the good news is the phone is not hard bricked, it has a soft brick and is recoverable. Redownload the RUU and try again, but make sure you have the correct one. If that doesn't work you'll have to unlock with htcdev, flash a recovery and flash a ROM. Then try the RUU again if you no longer want root.
Like others have said...it sounds like there is hope for your phone yet. Take your time and CAREFULLY follow instructions for whichever process you choose. Hopefully you post again later saying you were able to fix it.
apparently he doesn't care that much... he hasn't checked back recently...
ticklemepinks said:
apparently he doesn't care that much... he hasn't checked back recently...
Click to expand...
Click to collapse
I think he was going out to the bars...without a phone
Come on guys you scared him away. We were all noobies at one point. I done stupid moves and spent countless hours fixing my mess with the help on here. Give the guy a break. Op if u want hit me with pm and we can work together on this I am welling to help
Sent from my EVO using XDA
HixVAC said:
Alright so long story short I tried to rush through rooting my new phone here without checking everything out too much (complete fail on my part...but I wanted it rooted before I went out to the bars to save some battery life haha...ironic, now I'll have no phone tonight).
I went to root it and it somehow got screwed up...the sense launcher wasn't showing up along with the fact that when I pulled down the notification bar and hit settings, it crashed, so I went to unroot it with the RUU 1.13.651.1 and when I got to the comparison screen it said I had 1.13.651.1_R2...and being already frustraited at this point, decided how worse could it get? Tried it out, not my brand new phone is stuck at the black htc screen....fail.
Anyone have any suggestions on what to do? I tried running it again to no avail...I'm about to try the other RUU to just see if it works, but I'm running out of other ideas. Anyone that can help, it would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
First off don't feel too bad, No matter how sure you know what your doing we all make mistakes. I paperweighted mine while manually installing some mods last night. If you would of watched the how to RUU the evo lte you would of seen that that the black HTC screen is perfectly normal. The phone will sit on that screen for like 10 minutes sometimes it will reboot and sometimes you will get differnt screens. The key is to have the drivers handy and install them if ur PC ever calls the device android 1.0.
The RUU version 1.13.651.1_R2 is the one you should be using. As scary as it is you just need to be patient, and let the RUU run it may look like nothing is happening but something is.
fearbasel04 said:
Come on guys you scared him away. We were all noobies at one point. I done stupid moves and spent countless hours fixing my mess with the help on here. Give the guy a break. Op if u want hit me with pm and we can work together on this I am welling to help
Sent from my EVO using XDA
Click to expand...
Click to collapse
Nice! Who said there are no more Good Samaritans?
Props,
Doc
I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Does the small led come on when plugged into a charger? Have you tried to hold down the volume down button and power button down at the same time to access the bootloader, also please specify if your phone is gsm or cdma.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
flashallthetime said:
Does the small led come on when plugged into a charger? Have you tried to hold down the volume down button and power button down at the same time to access the bootloader, also please specify if your phone is gsm or cdma.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
Click to expand...
Click to collapse
the small led light does not turn on when pressing the power button (no signs of life at all!), i tried to reset (power button+volume down) it but nothing happens and it is a GSM phone.
Looks like your friend hoodwinked you bro. It sounds like he gave you a bricked phone. Unfortunately if your not able to access bootloader then its a paper weight now.
Jsparta26 said:
Looks like your friend hoodwinked you bro. It sounds like he gave you a bricked phone. Unfortunately if your not able to access bootloader then its a paper weight now.
Click to expand...
Click to collapse
Can't i just install another firmware using my pc? using something like flashtool for Xperia, for HTC?
looooboooo said:
Can't i just install another firmware using my pc? using something like flashtool for Xperia, for HTC?
Click to expand...
Click to collapse
As I have said, you need to be able to boot into bootloader mode to flash firmware. Whoever sold you that phone didn't tell you he hard bricked the phone in the process. The hboot had to have gottened corrupted. That's why you can't turn it on.
Jsparta26 said:
As I have said, you need to be able to boot into bootloader mode to flash firmware. Whoever sold you that phone didn't tell you he hard bricked the phone in the process. The hboot had to have gottened corrupted. That's why you can't turn it on.
Click to expand...
Click to collapse
How can i get it to boot into bootloader using adb reboot?
looooboooo said:
How can i get it to boot into bootloader using adb reboot?
Click to expand...
Click to collapse
Go ahead and give it a shot. Try adb reboot bootoader.
Jsparta26 said:
Go ahead and give it a shot. Try adb reboot bootoader.
Click to expand...
Click to collapse
How do i do that exactely? plz help me
looooboooo said:
How do i do that exactely? plz help me
Click to expand...
Click to collapse
Here's a tutorial that you might find useful in helping you set up adb http://forum.xda-developers.com/showthread.php?t=1751439.
Now do not take this the wrong way, you should listen to what I'm telling about your phone instead of ignoring me and trying to prove me wrong. Especially since I'm educating you on adb. I gave you that link so I dont have to explain how to set adb up. You have to be able to access bootloader, recovery or have phone completely on to run adb. In the end you will realize what I have told you. The person who sold it to you screwed you over. Your phone is completely bricked. Truly bricked. Please correct me if I'm wrong. I'm always open to learn new things.
I would definitely concur with Jsparta26, you unfortunately bought your phone from a unscrupulous, deceitful azz wipe.
(Don't ask me for help as I couldn't care if your phone explodes, eh!
looooboooo said:
I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Click to expand...
Click to collapse
I read your problem and read through the other suggestions, It does sound bricked but have you tried a different battery?, I had a battery one time that once it went completly dead the phone would not charge it, I had to charge it though an external charger, once it had some juice in it it would charge fine with the phone. All i am saying is make sure it is not something as simple as a bad battery before you decide to use it as a paperweight. If you do get it to turn on, let me know and I can help you get it working again.
mcerk02 said:
I read your problem and read through the other suggestions, It does sound bricked but have you tried a different battery?, I had a battery one time that once it went completly dead the phone would not charge it, I had to charge it though an external charger, once it had some juice in it it would charge fine with the phone. All i am saying is make sure it is not something as simple as a bad battery before you decide to use it as a paperweight. If you do get it to turn on, let me know and I can help you get it working again.[/
God I'm catching one of my migraines again ugh
Edit: my bad I guess you read the posts. He wouldn't need anymore help seeing how his main concern was getting his phone turned on.
Click to expand...
Click to collapse
Yeaa ur phones bricked lol....I bought a faulty HTC sensation 4G off of eBay nd when it came it would not charge ....then I connected it to my laptop nd came up as qhsusb_dload soo yea haha -_-...I would just return it to the seller as theres nothin u can do. Best of luck man hope they return ur money :thumbup::thumbup:
Sent from my LG-P925 using xda premium
Thanks everyone wholeheartedly! i was abale to pay a guy 40 bucks to fix it using his jtag Apparentely he only had to rewrite the boot.
So for everyone having the same problem, JTag is your solution nothing else
Juste a small question, i have viper 3d rom on it and i was wondering is it the best ?
looooboooo said:
Thanks everyone wholeheartedly! i was abale to pay a guy 40 bucks to fix it using his jtag Apparentely he only had to rewrite the boot.
So for everyone having the same problem, JTag is your solution nothing else
Juste a small question, i have viper 3d rom on it and i was wondering is it the best ?
Click to expand...
Click to collapse
Its like I said. Your hboot was corrupted. That's great you got your phone booted back up.
Now as for viper 3d there's no "best" ROM. Its a subjective topic so its basically not allowed. I can tell you its very stable, has lots of tweaks, and highly customizable. Only thing is that is doesn't have 4g or 3d. And it works on any hboot.
Jsparta26 said:
Its like I said. Your hboot was corrupted. That's great you got your phone booted back up.
Now as for viper 3d there's no "best" ROM. Its a subjective topic so its basically not allowed. I can tell you its very stable, has lots of tweaks, and highly customizable. Only thing is that is doesn't have 4g or 3d. And it works on any hboot.
Click to expand...
Click to collapse
here we go again! the phone is rebooting periodically now... wth do i do? as for viper , i want a rom that has 3d and is as good as viper, thank u!
The only roms with fully working 3d camera are sense 3.6 roms
(Don't ask me for help as I couldn't care if your phone explodes, eh!
brick fixable
I had the same thing going on w/my phone. Problem was: the hboot was corrupted.. The only way to fix this is with linux.. I don't recall the exact files or command that I ran but if you search you will find them and it will bring your phone back to life.. NOTE: every thread i found had old information with older hboots which have different filenames.. Once you find the information on how to fix your hboot aka "brick" you simply need to get your exact hboot file and replace (flash) it through linux.. there is even an ubuntu cd you can download and boot into so that you don't have to install Linux.. I'd give you more info, but I'm at work right now and don't have time to research it. Good luck..!!
looooboooo said:
I just bought an HTC 3D evo off craigslist, the seller said that he loaded the wrong ROM into it, he had android 4.0, tried to upgrade to 4.1.
I don't know if it is rooted or not, doesn't turn on at all (nothing happens, light, vibration, etc), i tried removing-the-battery trick, didn't work. I just want to load a new ROM into it so i can get it working again..
How do i do that?
Thanks.
Click to expand...
Click to collapse
today i have a problem with my evo. i loss my phone in my car, and at night was frost, - 20 C.
half of day phone dosnt power on. my first opinion was that the battery died, but when i measured voltage, i see 3.75V, thats normal for X-Polimer Battery. after i Inserting the battery at her place, and press power button, phone turn on
i dont know, may be i had to remove the battery for a long time, or during this time dry condensate, after frost.