ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
That sounds Bad ...
Sorry pal, you have a serious problem. The .51 radio is the culprit. I'm afraid you will have to search this out, but I am unaware of any solutions.
Good luck. Warranty?
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Somebody on this forum already reported about similar problem. I don't remember whether the solution was found.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Why do people not read, you CANNOT FLASH A .51 RADIO ON A T-MOBILE DEVICE. LEARN TO READ AND THIS WON'T HAPPEN.
uniqs said:
Somebody on this forum already reported about similar problem. I don't remember whether the solution was found.
Click to expand...
Click to collapse
Somebody? lol, quite a few people are in that boat actually.
@jswllms3
Try searching for Jtag or .51 radio brick. And maybe post in this thread
warranty will be ok so long as you dont mention flashing.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
How Cute
You flashed a 2.07.51 radio ! ! !
Take your phone back for warranty and never flash a .51 radio again as every one else saying...
Good luck with it.
ok. lol. so its abrick. ill search a little more butthe strange thing is, when i plug it in via usb to my comp it still shows that its searching for new hardware.. i dont think its a total loss. i have the odd feeling i can revive it. but in any case, how do i turn it in for a warranty and what would i say? lol.
jswllms3 said:
ok. lol. so its abrick. ill search a little more butthe strange thing is, when i plug it in via usb to my comp it still shows that its searching for new hardware.. i dont think its a total loss. i have the odd feeling i can revive it. but in any case, how do i turn it in for a warranty and what would i say? lol.
Click to expand...
Click to collapse
You say. I don't know what happen. I was charging it over night...and when I work up it was off. I turn it on and nothing happens.
what i meant to say is, im guessing i turn it into htc for the warranty, but other then flash custm roms and different radios, what other excuse would they take? i mean, they have ways of finding out right?
Maybe HELP YOU
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
I don't know if I can help you But you can enter in bootloader mode and via usb cable connect to your computer? If you can...and have Bepe&Cotulla HARDSPL3... Do a Task29 and when near 100% push volume down to stay in bootloader mode... then... Flash a radio 50 (my sig have a link to my current radio)... and without exit bootloader mode (when near 100% push volume down) Flash a ROM you want in your device...
Sorry... I only try help you... maybe don't have luck or... many luck
ddgarcia05 said:
You say. I don't know what happen. I was charging it over night...and when I work up it was off. I turn it on and nothing happens.
Click to expand...
Click to collapse
Say this ^^^^
Fidalgos said:
I don't know if I can help you But you can enter in bootloader mode and via usb cable connect to your computer? If you can...and have Bepe&Cotulla HARDSPL3... Do a Task29 and when near 100% push volume down to stay in bootloader mode... then... Flash a radio 50 (my sig have a link to my current radio)... and without exit bootloader mode (when near 100% push volume down) Flash a ROM you want in your device...
Sorry... I only try help you... maybe don't have luck or... many luck
Click to expand...
Click to collapse
no. it will not enter bootloader or anything. wont connect via activesync nothing. tried a hard reset, soft reset. every type of reset. nothing works. tried bootloader and.. NOTHING!!!! ah.. but its bugging me out that its trying to install new device driver. i feel like i can fix it... if christ was real i would pray to him!!!!
if you read the dozens of other people that did this, you will see they all say the pc looks for drivers for "qualcomm blah blah blah". don't kid yourself, its gone.
jswllms3 said:
ok. i flashed the hyperrom ultra v15.0 to my tmobile us hd2 and decided i wanted to flash a new radio.. just to see if i was missing the speed and agility that i hear about so much from others. i started off with a 2.10.50.26 i believe. then flashed the 2.08.50.05 with much slower speed than the original. THEN, i flashed the 2.07.51.22_2 and my phone has not powered up since. it will not go into bootloader and when the update util was done, my laptop said it needed to install a new hardware driver for qualcomm cdma. now i now this is bad. but could someone explain why it did this and why my phone isnt powering on and if ill ever be able to use it again??!!?!?! any help would be appreciated.
Click to expand...
Click to collapse
Simple: The .51 radio raped your TMOUS's internals. It will never work again. Play dumb with the warranty people.
haaahha! so i called the warranty people and told them it was dead. asked a few questions, specifically: "what voids the warranty and why would i be charged for any repairs?" i got a number of answers including, "flashing a new os, rom or radio." hahahaha!!! so essentially, im f**ked, right? i mean this is htc, how could they not find out?
so ive read part of three threads where everyone is stating that as long as they cannot get it to go into bootloader, they cannot charge me and theyll repair my phone or send me a new one. though i am worried that i havent read anything about any phones coming back to the peoples having this problem.. i dont have insurance through tmobile so im assuming i cant send it back to them, i am however still under the year manufacturers warranty provided by htc. does it matter who i send it to? and has anyone had experience with this particular problem that can acclaim to or deny me the assurance of me getting my phone back? lol.
Do not lie, as that could bite you in ways you don't want to deal with; as in fraud, etc. Our phones are around $550, a retainer for an Attorney to defend you against criminal charges would be a lot more.
I would go into tmobile, and when you go into store you simply tell them the truth that the phone doesn't work.
Definitely a drag that you bricked the phone. Could have been me, probably will be someday when I get too eager or careless.
Anyhow, let us know what happens.
jswllms3 said:
so ive read part of three threads where everyone is stating that as long as they cannot get it to go into bootloader, they cannot charge me and theyll repair my phone or send me a new one. though i am worried that i havent read anything about any phones coming back to the peoples having this problem.. i dont have insurance through tmobile so im assuming i cant send it back to them, i am however still under the year manufacturers warranty provided by htc. does it matter who i send it to? and has anyone had experience with this particular problem that can acclaim to or deny me the assurance of me getting my phone back? lol.
Click to expand...
Click to collapse
well for a start this is the regular hd2 section, have you read any of the posts in the tmous section? (Well, no, else you would have seen the myrriad warnings about flashing ..51.. radios )
Loads of people have had them repaired after this type of brick, and the only people that haven't have been those that confessed to flashing.
And no, just because it is HTC, they cant see into a broken bootloader. The best they can do is JTAG the phone, and that flashes a new bootloader anyway, wiping out any trace of what you did.
Related
Well, i ****ed up my phone.
Trying to bring it back alive failed, so I'm going to bring it
back to T-Mobile.
Does someone know a very good lie I can tell them, so I don't have to pay for the repair.
When i try to start my phone, i see a HTC splashscreen, and thats it. Normally it start with a T-Mobile splashscreen. Can they see i tried flashing my phone, or is that an assumption they make.
CCRDude said:
I don't think using bold letters and the clear word "lie" will help you a lot... you just highlight that you ask for illegal help
Maybe you should take a look at the bricked-devices topic for a chance to revive it?
Click to expand...
Click to collapse
I have spent the last 3 days 30 hours orso fixing my phone. Revive is something my dead baby won't do.
vayip said:
I have spent the last 3 days 30 hours orso fixing my phone. Revive is something my dead baby won't do.
Click to expand...
Click to collapse
enter the bootloader; try to flash a regular update from your provider to it.
vayip said:
Well, i ****ed up my phone.
Trying to bring it back alive failed, so I'm going to bring it
back to T-Mobile.
Does someone know a very good lie I can tell them, so I don't have to pay for the repair.
When i try to start my phone, i see a HTC splashscreen, and thats it. Normally it start with a T-Mobile splashscreen. Can they see i tried flashing my phone, or is that an assumption they make.
Click to expand...
Click to collapse
I did the same with my Vodafone (UK). I just told them I'd hard reset and this is all I can see on the screen (don't get stroppy etc).
Mine will be back Tuesday, warranty repaired.
Vod UK use an outside repair centre so will probably be the same as T-Mobile if you are in UK. Mine needed a new motherboard, but there is a bit of a shortage in the UK (too many bricks???). I guess it depends on the outside service centre contract whether they charge you or T-mobile (and maybe also because I had warranty and Insurance)..
Just go in and plead ignorance, but if they want to charge you, ultimately it was you that ****ed it and not them
Toast it in the microwave for 5 seconds!
boz said:
Toast it in the microwave for 5 seconds!
Click to expand...
Click to collapse
That's a new one - when car radio codes first came out they always said to put them in the freezer then stroke the chips legs to erase the cmos... never worked for me, but I'd probably get away with the microwave thing with 3 kids at home!!!
@ Olipro
If you mean the SD-card flashing, T-Mobile Holland doesn't have an update available. There is an T-Mobile Holland ROM available, but the image is older than the image installed on my phone. When checking the ROM in the white screen, it says not allow. I think i need ROM 1.21.114.3 from T-Mobile if I want to do the SD-card flash.
I only have access to the bootloader, I have bootloader 1.04, and I have access to KITL mode, but the Windows CE Platform Builder fix also doesn't work
@ ach2
I was thinking also something like that. That I hard reset my phone and now it's broke. I was also thinking something like I left my phone on the charger for the weekend, and when I came back I did a soft reset because it wouldn't go on and know I only see a HTC splash screen.
vayip said:
When i try to start my phone, i see a HTC splashscreen, and thats it. Normally it start with a T-Mobile splashscreen. Can they see i tried flashing my phone, or is that an assumption they make.
Click to expand...
Click to collapse
Can you think of a good reason whey the boot screen has changed from the normal T-Mobile one... just hope they don't turn on the phone. Did you try Olipro's suggestion?
@ Wam7
The T-Mobile splash screen is in the extended ROM. If the extended ROM is ****ed up like mine is, it probably goes back to its embedded splash screen, and that's the one from HTC. But thats not what I'm going to say, I'm going to say how should I know.
If I remember correctly a guy has managed to dump the ROM from a Hermes and flash it to the phone... saw a thread somewhere here. If that's the case then you should just need a ROM from a fellow dutch T-Mobile owner with the newer ROM. I take it your phone is not SuperCID
vayip said:
@ Olipro
If you mean the SD-card flashing, T-Mobile Holland doesn't have an update available. There is an T-Mobile Holland ROM available, but the image is older than the image installed on my phone. When checking the ROM in the white screen, it says not allow. I think i need ROM 1.21.114.3 from T-Mobile if I want to do the SD-card flash.
I only have access to the bootloader, I have bootloader 1.04, and I have access to KITL mode, but the Windows CE Platform Builder fix also doesn't work
Click to expand...
Click to collapse
if you have 1.04; run the RUU on your computer; you will get a "Vender ID Error" immediately ignore this and run the updater AGAIN (do not touch or unplug your PDA) after doing this a second time it will begin to flash
vayip said:
Well, i ****ed up my phone.
Trying to bring it back alive failed, so I'm going to bring it
back to T-Mobile.
Does someone know a very good lie I can tell them, so I don't have to pay for the repair.
When i try to start my phone, i see a HTC splashscreen, and thats it. Normally it start with a T-Mobile splashscreen. Can they see i tried flashing my phone, or is that an assumption they make.
Click to expand...
Click to collapse
seriously this is why MS and Carriers HATE us
Olipro said:
if you have 1.04; run the RUU on your computer; you will get a "Vender ID Error" immediately ignore this and run the updater AGAIN (do not touch or unplug your PDA) after doing this a second time it will begin to flash
Click to expand...
Click to collapse
I did what you said. I connected the phone to my laptop in bootloader. I started the RUU from WMXL 0.20. My phone goes to the white screen and at 0% i get a message on my laptop the connection got disconnected. So i start the RUU again, but again the message my connection got disconnected.
So still working on a good lie.
@vayip: sounds like a problem with the USB on your laptop. Try using a different computer. BL1.04 will let you flash any OS provided your NAND isn't full of bad blocks. You're a long way away from returning your device to Tmo IMO.
On the new computer:
direct USB connect to rear port only no usb hubs
pc running windows XP
turn off screensaver/Powersave mode
close all other apps
hands off the computer for the 25 minutes or so that it takes
Sleuth255 said:
@vayip: sounds like a problem with the USB on your laptop. Try using a different computer. BL1.04 will let you flash any OS provided your NAND isn't full of bad blocks. You're a long way away from returning your device to Tmo IMO.[/list]
Click to expand...
Click to collapse
Does it matter if the phone is simlocked or not. My phone is not SuperCID.
The strange thing than is, i have 2 laptops. Doing the upgrade don't work on both.
Will try a normal pc then. Maybe more luck.
Follow Oli's advice about retrying the update if you get an initial vendor ID error. BL1.04 will flash any rom without SuperCID due to a bug.
You might want to jump in with mtty first to see if your NAND is full of bad blocks. If it is then your device is toast fttb.....
spiritofseth said:
seriously this is why MS and Carriers HATE us
Click to expand...
Click to collapse
I completely agree! If you ****ed up your device, than you should have the courage to stand up for it and if it was not your fault, than just tell them the truth! But suggestions like "put it in the microwave for 5secs".... come on
And just a small hint: If you (for example) really put it in the microwave, than you'll better pray that no technician ever analyses your device - if so you could get into serious trouble, mate.
Btw, if you microwave it, you probalby need a new microwave too.
Edit: And i dont think its warranty would cover "I just put my Phone in there"
"So still working on a good lie."
Doesn't breaking your phone through your own actions and then getting it repaired/ replaced for free by telling lies make you a liar and a thief?
I trashed 8525, and that sucks, but it was my fault so I have to pay for it.
In my adventures flashing Roms, I've only bricked 1 Hermes (Cingular 8525). I actually told the local Cingular shop that I broke it 2 weeks after I bought it. The manager told me to bring it in and she replaced it under the 30 day in-store return policy. I was suprised because I had caused the bad NAND Block problem on the device but she said that since I was able to get an official Cingular Rom flashed onto it and it booted into WM5 (just wouldn't do anything because of memory errors).
Now I also have a very good working relationship with this store. I've gotten a phone about every 6 months from them over tha past 2 years and have given them some great info regarding WM5 devices (reccomendations on screen protectors, software & cases etc). I have 3 lines (2 with Data) and even if they don't know me by name eveyone in the store knows me by reputation.
Tomorrow I will have my spare Hermes (also 8525) so we can begin experimenting with getting some additional storage memory without risking bricking my primary phone.
The way I see it, we are taking a chance when we modify our devices.
I've had to return 2 Wizards for Warranty replacement to Cingular, both were CID Unlocked but the problems were unrelated to flashing Roms (One was because the touch screen developed a dead spot the other was because of Radio hardware issues).
So one of the 5 pins in the mini-usb connection is missing. This disables any sort of data connection through usb, however I'm still able to charge the phone. Now I think I can get my phone replaced by Verizon but as it is right now I have dcd's 3.2.0 rom and the 3.42.30 radio. I have no problem flashing through my sd card as far as roms and radios go, but can the bootloader be relocked in the same fashion? I know the procedure for relocking is in the wiki but it relies on an activesync connection, which I cannot make. Am I proper f*cked or can I do this relocking?
So one of the 5 pins in the mini-usb connection is missing. This disables any sort of data connection through usb, however I'm still able to charge the phone. Now I think I can get my phone replaced by Verizon but as it is right now I have dcd's 3.2.0 rom and the 3.42.30 radio. I have no problem flashing through my sd card as far as roms and radios go, but can the bootloader be relocked in the same fashion? I know the procedure for relocking is in the wiki but it relies on an activesync connection, which I cannot make. Am I proper f*cked or can I do this relocking?
Click to expand...
Click to collapse
You can't relock unless you have an activesync connection. You can relock using nuespl, but it will relock to 2.07 which is the GPS rom stock bootloader...something that doesn't exist yet for Verizon.
I think ImCoKeMaN @ PPCGeeks has a relocker for the 1.06 bootloader that can be run from SD. It's not recommended for use after running a GPS ROM/Radio, but I've heard of a few success stories. Of course, I've also heard of a number of devices becoming completely and utterly useless after trying this. I don't think he made the version that can run from SD publicly available, but you could try shooting him a PM. He'd be able to give you all the details as well. Might be worth a shot as a last resort.
I might give that a try. If I recall, I can set up an activesync through bluetooth, which is what I'm goin to try first. If that's impossible I'll be pming ImCoKeMaN. Thanks
If you have the insurance it would be unfournate when it takes a trip in to the Shower or Tub.
Big Dawg 23 said:
If you have the insurance it would be unfournate when it takes a trip in to the Shower or Tub.
Click to expand...
Click to collapse
Or even better, falls down into the toilet. Chances are the people at Verizon won't want to poke around with it in that case.
Before I go through relocking or flushing my phone I thought I'd try to bluetooth connect it to try activesync. Well, it seems that the only connect I can make is to use it as a dial-up modem, a serial connection isn't possible. Has anyone else with dcd's rom tried to connect to a pc for file transfers and succeeded?
Honestly, I think the flashing / locking software relies on the USB connection. If I remember correctly, once the connection is made through Activesync... it disconnect Activesync. I'm not sure if this connection stays available for the flashing / locking. I personally don't want to try and brick my phone. LOL
Nitro is correct. The unlockers/relockers that run from your PC place your phone in bootloader mode, and at that point your bluetooth connection would drop.
The real issue isn't the broken USB port. There are ways to relock from SD. Your main problem is that going from a GPS ROM/Radio/SPL to a non-GPS version has been known to brick devices. You could always try and hold out until VZW releases an official GPS ROM, then you wouldn't have to worry about going back to a 1.x SPL. From what I've seen, gc14 may have some insight into when that ROM will actually be released.
I had a similar issue happen to my sprint mogul, I was able to charge but the mini-usb connector was messed up so I could not get a data connection.
I re-flashed the latest stock rom and radio from the sd card and took it in. Both the service reps and the technicians did not notice the bootloader version, and I got a replacement for free within 30 minutes or so. I would think that with all the devices they work with, the vast majority of people do not have unsupported software versions and the techs most likely do not check every time (or just do not care all that much).
Just my thoughts and experience though, yours with Verizon could obviously differ.
EDIT:
Ahh yeah I forgot that Verizon has not released their gps radio yet and that downgrading can be problematic... Best of luck to you.
VerusMaya said:
I had a similar issue happen to my sprint mogul, I was able to charge but the mini-usb connector was messed up so I could not get a data connection.
I re-flashed the latest stock rom and radio from the sd card and took it in. Both the service reps and the technicians did not notice the bootloader version, and I got a replacement for free within 30 minutes or so. I would think that with all the devices they work with, the vast majority of people do not have unsupported software versions and the techs most likely do not check every time (or just do not care all that much).
Just my thoughts and experience though, yours with Verizon could obviously differ.
Click to expand...
Click to collapse
Same exact issue here, except I did go ahead and put the 2.07 SPL back on. They are wanting to charge me $35 though. How long ago did you get your phone? I might try a few other shops and see if they'll swap me a new phone for free.
I'm going to try and make it as stock as possible and go for the return. I've found what seems to be a lot of conflicting procedures for returning to Verizon stock roms and radios, is there a 'best' one?
egrzelak said:
I'm going to try and make it as stock as possible and go for the return. I've found what seems to be a lot of conflicting procedures for returning to Verizon stock roms and radios, is there a 'best' one?
Click to expand...
Click to collapse
Yeah, this one here.
bedoig said:
Same exact issue here, except I did go ahead and put the 2.07 SPL back on. They are wanting to charge me $35 though. How long ago did you get your phone? I might try a few other shops and see if they'll swap me a new phone for free.
Click to expand...
Click to collapse
I got the original one in late December and got them swapped about two months ago. I was actually rather surprised I got it so hassle-free and without paying anything, I expected to have to pay some warranty fee or something.
I ran into this situation about a month ago, except the data port was hosed enough I couldn't charge or sync. After stressing about it I contacted a major contributor to the board and he said not to worry about it.
So I took the phone in (@ 3 mos. old) and the vzw sales guy was pretty cool about it (I didn't mention anything about flashing the software). He got on the phone with someone else at vzw tech and did some kind of exchange program. A few days later I had a new 6800 and instructions to send the old phone back.
I probably should have secured the phone better in the box when returning, but oh well. I seriously doubt anyone even looked at the rom, since it was a hardware issue.
why not just get a new cable?
deeznuts2 said:
why not just get a new cable?
Click to expand...
Click to collapse
The cable isn't the problem as the pin is missing from the phone.
Alright, so the only way to relock back to Verizon's original SPL is with a working USB. Over on ppcgeeks there seem to be some people who've flashed back to the stock radio and rom without relocking the phone. They only problem they've experienced is it being unable to wake up when it's been put in sleep mode. I think this is what I'm going to do to do the return.
egrzelak said:
I'm going to try and make it as stock as possible and go for the return. I've found what seems to be a lot of conflicting procedures for returning to Verizon stock roms and radios, is there a 'best' one?
Click to expand...
Click to collapse
Look at it this way if you brick it who cares....you are trying to get it replaced.....
i try, realy i do. have done all with no help (not that i haven't asked) but i can only get so far. really kills me to read signatures of others bragging how they have their titan going with gps,mms,net (everything including kitchen sink) on cricket. yet i get nowhere, even when 3 ask. i know that ppcgeeks is almost a mirror of this site, and i don't mean to ruffle feathers, but ppc only seems to be a good place to SEARCH, i'm having no luck with forum.ppcgeeks.com/forumdisplay.php?f=48
jpwhre said:
i try, realy i do. have done all with no help (not that i haven't asked) but i can only get so far. really kills me to read signatures of others bragging how they have their titan going with gps,mms,net (everything including kitchen sink) on cricket. yet i get nowhere, even when 3 ask. i know that ppcgeeks is almost a mirror of this site, and i don't mean to ruffle feathers, but ppc only seems to be a good place to SEARCH, i'm having no luck with forum.ppcgeeks.com/forumdisplay.php?f=48
Click to expand...
Click to collapse
The difficultly with Cricket is there is no "stock" Rom for this phone. I had the same problem with a Palm Treo, it worked great until I ported my home phone number to the phone and I lost internet. I could only find the same instructions that I have and must have punched it in a thousand times, called Cricket a couple to have my data package removed and added and nothing. When I swapped out for a Cricket Motorola K1m KRZR everything worked just fine. So something happened to the phone and I wasn't going to fix it as there was no stock rom to go to. You might try buying a cheap real Cricket phone off ebay, changing to that phone and then change back to the Titan and see if that changes something. $15 per swap though, maybe find a friend that can do it for free. Hope this helps.
I have other phones, even an other titan, same rom and everything. It has been my test phone for flashing. I didn't want to boar group with story. I ordered one from fundevices and after 6 weeks of waiting and calling, I ordered on off evilbay and it showed in two days. Ran it for a bit the way it came with 6.0 and would send pic but not recieve. Fathers day wife, kids and I went camping and my phone got soaked with soda (floated in it for while on car charger before I found it). Sunday we got home and I took phone apart and cleaned screen side best I could, but mother board and key board got most damage. It would come on, then off, and on, and off........
anyway I washed the mother board in hot water and dish soap in big bowl for about 15 minutes. Put all back together making sure everything was 100% dry. Turned it on, nothing. But it would charge battery. Monday the first one oredered (after 10 weeks) was at my door after work. I didn't activate it knowing I was going to change the rom, and just used wifi for about 5 days. Still using damaged one as a charger and backup battery. I sent both phones to to0 (mike cooper) and had him flash the to0v3 rom on one, but he couldn't get wet phone to come on. When I got phones back, it still had 1.20 bootloader and his rom. No gps, and it took me a week to get the net to work and mms never worked. Sent it to him under the impression that his rom posted on ppc, hofo and cricket phone talk saying everything worked, was what I was getting him to do. When I got it back, activated it, and made a call, no mic. It's not broken. Missing driver, missing patch? Don't know, I know it works. Make a call (not activated) and blow in mic. Get static. Do a video, and it records and plays back sound, but to do a voice command, or record a voice memo nothing. After a few days the battery was low, but not dead. I took backup off damaged phone and put in low battery and turned on (constant on and off would kill it for sure) and it came on. I mean it is the phone I use everyday, flashing, no luck, this post. Been going for about 6 weeks. Still untouched, 2.09 sprint rom with 1.32.00 radio, and it had a dcd hack since windows media player said dcd rom in back ground. How it came working on cricket. While flashing phone with no mic, I hooked up good phone and did unlocker on it without really knowing what I was doing. Of course it stuck in bootloader and I had no clue what to do. By now I have flashed, and flashed, and flashed. Even ripping apart roms posted to put together some things. E.G. dcd 1.6.0 to get stock 1.06 spl and putting it in 2.09 rom that was on phone ruu folder to get phone locked to do hard spl 2.40 Original rom had 1.20 and every time i relocker, it would get stuck in bootloader and then I would flash original rom, thus completing a circle.
How I got to where I'm at now. With 2.09 rom, use relocker, then rom I pieced up to get out of bootloader. Then run hard spl 2.40 since unlocker doesn't, and flashing 2.47 from card always gets me stuck in 2.07 bootloader. Once done hard spl, it's stuck in 1.20 bootloader, flash sprint 3.56, half way thru it stops and wants to recover (don't). remove battery and turn back on and force phone into bootloader and it is 2.40, flash vCBU and when done it gets stuck in boot screen and only thing in red letters is "no radio". Force in bootloader and flash 3.56 and not let customize. Then back to bootloader and flash over vCBU again. Then flash vboots. Then go thru and do reg hacks and fill in stuff for modem. And that is where I am. And yes, that is only way I could get everything flashed. 4 diff attempts on 2 phones, all left same path. Still have my nokia 6265 but wife uses for backup charger for her 6275 and some old dot matrix green screen cricket phones. I was hoping for an easier resilution. Since on phone was almost 4 bills, one was almost 3 bills, and sending to to0 to flashed was 70, pluse switching back and forth at cricket.
jpwhre said:
i try, realy i do. have done all with no help (not that i haven't asked) but i can only get so far. really kills me to read signatures of others bragging how they have their titan going with gps,mms,net (everything including kitchen sink) on cricket. yet i get nowhere, even when 3 ask. i know that ppcgeeks is almost a mirror of this site, and i don't mean to ruffle feathers, but ppc only seems to be a good place to SEARCH, i'm having no luck with forum.ppcgeeks.com/forumdisplay.php?f=48
Click to expand...
Click to collapse
Was there a question in there?
How far did you get? where are you stuck? what part do you need help with?
Can you not flash 3.2.6 and run the cricket carrier cab to get all this working..? (I have VZW.. so I'm not sure about cricket)
Question is fairly clear. I posted link to ppcgeeks where my origanl question was, and when I said something about ruffling featers. Will I get anywhere asking this group to help me since it is a near perfect mirror of ppc geeks as for as stickies, threads, even what is in the threads word for word, bashing ppc for not having the backbone to answer my request for help and trying to get it here? If you read my post at ppc showing that my mms kinda works, my net does work my gps doesn't work, dialing *228 after going thru a list of prls. I guess it would be obvious of the whole, is there a question here?
How come my gps don't work after filling all appropriate fields in?
What the hell is up with my mms?
Why can't I get *228 to program my phone after changing prls
Why does the evdo change to 1x when in call and on net?
--------------------------------------------------------------------
..................IS IT WORTH ASKING HERE IF PPCGEEKS HAS GOTTEN ME NOWHERE (XDA MIRROR BULLETIN BOARD)?................................
--------------------------------------------------------------------
Why hasn't cricket mofia chirped in?
And, isn't the process I went thru supposed to give me evdo rev a? To0's rom didn't, even after boasting it did. I have done dcd roms, but they seem to be too blahh for me. In my post at ppc it shows my pc is junk (ibm). Figuring out my build os to come up with with my own rom is a joke, it took me 2 hours to do first post here. (really) and ended up having to do it on my titan. Only thing I would trade on the vito rom is the feedback in exchange for windows update.
Sorry, but you asked.
Wow that seems like a lot of frustration, I am sorry to hear that. Have you tried to bring the phone back to its original carrier like Verizon or Sprint and then started over with the latest Radio and DCD Rom? The reason I ask is it seems that you might need to start from a known point to "clean" out all the "custom" stuff. You also might want to contact Bunvilla as he PMed me with Cricket info and has he Mogul working on Cricket:
well i bought a qwest mogul which was configured for qwest network. It took a few day to find a way to get the SPC or MSL code as they call it which allows me to go into the settings and change it from qwest to cricket settings. Once the settings have been changed then u will be able to gain access on crickets network. There is a very important file called a PRL which u need to load onto the phone but can only do it if u have the SPC code. good news i can tell u how to get any carries SPC code for the mogul/ its a piece of cake to switch and way cheaper of a bill and u will have access to all the features internet and everything. hope this has helped " cricket rules"
Forward Message
Click to expand...
Click to collapse
I unfortunately am not on Cricket with my Titan. I am getting ready to flash a Verizon Motorola K1m KRZR over to Cricket but it seems way different process. I hope you do figure it out and some one on Cricket here can help you get past this ugly mess. Hopefully Bunvilla can help. I will PM him now and ask him to get in touch with you.
jpwhre said:
Question is fairly clear. I posted link to ppcgeeks where my origanl question was, and when I said something about ruffling featers. Will I get anywhere asking this group to help me since it is a near perfect mirror of ppc geeks as for as stickies, threads, even what is in the threads word for word, bashing ppc for not having the backbone to answer my request for help and trying to get it here? If you read my post at ppc showing that my mms kinda works, my net does work my gps doesn't work, dialing *228 after going thru a list of prls. I guess it would be obvious of the whole, is there a question here?
Click to expand...
Click to collapse
Well, first I would like to help you… but you posted a link that does not take me to a post.. it takes me to a general forum.. And it’s the Vogue Forum at that. I’m not searching another board for your question. So Excuse me for not knowing your question.
Second, While I have not read your post there.. If you posted with anywhere near the lack of information or general attitude (as if you are entitled to be helped) as you did here.. I can see why nobody helped you. (edit I see more info in your second post but you are all over the place and filled with irrelevant info it's hardly readable)
jpwhre said:
-------------------------------------------------------------------- ..................IS IT WORTH ASKING HERE IF PPCGEEKS HAS GOTTEN ME NOWHERE (XDA MIRROR BULLETIN BOARD)?................................ ------------------------------------------------------------------
Click to expand...
Click to collapse
Yes, a proper post with a well phrased question, information on what rom / radio / and steps you’ve taken.. and a proper post title will almost always get a response and the help you need to get you on the right track. The post title is important because people see those and decide.. “Hey I know how to fix that” (MMS and GPS on Cricket Help) would be a good one. Your title “Will this work” will be skipped by most people. So… if you don’t follow those steps.. NO it’s not worth asking here.
jpwhre said:
-- Why hasn't cricket mofia chirped in? And, isn't the process I went thru supposed to give me evdo rev a?
Click to expand...
Click to collapse
Cant tell ya.. don’t know what process you went through. Don’t know what cricket mofia is?
jpwhre said:
To0's rom didn't, even after boasting it did.
Click to expand...
Click to collapse
It’s possible you did something wrong… Because a rom does not work for you, you cant go blaming the rom.. unless everyone or most people have the problem. (I’m not familiar with that rom) If many people use it, and it works for most.. then the problem is probably you.. Bashing the rom will get you nowhere fast.
** Edit** Didn't realize To0's Rom was installed for you for $$.. odd?
jpwhre said:
I have done dcd roms, but they seem to be too blahh for me. In my post at ppc it shows my pc is junk (ibm).
Click to expand...
Click to collapse
DCD is what I use… Not sure I can help you with another rom… I cant fix your PC either. Whats blahh about a DCD rom.. Can you tell me what makes another rom better. They are all about the same except the performance tweaks and stability. DCD is stable and performs well.. everything else is an app that can be installed on any rom.
jpwhre said:
Figuring out my build os to come up with with my own rom is a joke, it took me 2 hours to do first post here. (really) and ended up having to do it on my titan. Only thing I would trade on the vito rom is the feedback in exchange for windows update. Sorry, but you asked.
Click to expand...
Click to collapse
You obviously have a lot of problems….
If you want help.. you need to run something most users can support.. you say DCD roms are blahh.. But that’s where you’ll get the best support.
jpwhre said:
How I got to where I'm at now. With 2.09 rom, use relocker, then rom I pieced up to get out of bootloader. Then run hard spl 2.40 since unlocker doesn't, and flashing 2.47 from card always gets me stuck in 2.07 bootloader. Once done hard spl, it's stuck in 1.20 bootloader, flash sprint 3.56, half way thru it stops and wants to recover (don't). remove battery and turn back on and force phone into bootloader and it is 2.40, flash vCBU and when done it gets stuck in boot screen and only thing in red letters is "no radio". Force in bootloader and flash 3.56 and not let customize. Then back to bootloader and flash over vCBU again. Then flash vboots. Then go thru and do reg hacks and fill in stuff for modem. And that is where I am. And yes, that is only way I could get everything flashed. 4 diff attempts on 2 phones, all left same path. Still have my nokia 6265 but wife uses for backup charger for her 6275 and some old dot matrix green screen cricket phones. I was hoping for an easier resilution. Since on phone was almost 4 bills, one was almost 3 bills, and sending to to0 to flashed was 70, pluse switching back and forth at cricket.
Click to expand...
Click to collapse
This whole process is wierd....
So I think I understand.. you are at SPL 2.40? Because 2.47 would not work? You put a sprint rom on it, but it says no radio?
Are you against DCD 3.2.6? I'll cook you a rom with the features you want and put it on my FTP if your computer is too slow to do it.
Do you have an SD card thats less than 2GB and formatted with Fat 32?
If so.. I should be able to help you get working.
--------------------------------------------------------------------
..................IS IT WORTH ASKING HERE IF PPCGEEKS HAS GOTTEN ME NOWHERE (XDA MIRROR BULLETIN BOARD)?................................
--------------------------------------------------------------------
Why hasn't cricket mofia chirped in?
wow!!!! Its gonna be ok lil buddy. hang in there and have some patients ( i know your patients has been depleted) and i will try and help u to get answers and your phone working properly again.
I personally have so much on my plate that i dont get to "ppc geekout" as much as i used to.
1) How come my gps don't work after filling all appropriate fields in?
well the answer is that u shouldnt really have to enter anything in any field/ just make sure that the radio and the rom are both of the GPS rom release. cant have a pregps radio with a gps enabled rom, this is not good.
2)What the hell is up with my mms?
mms is a fickled thing , especially for us cricket people/ the problem is the wap settings and some wierd issue in the reg where a certain setting would basically block our phones from recieving the mms message.
Long story short is that with the updating of roms (from wm5 to wm6 to wm6.1) the mms seems to also have changed and just when we figure out what the problem is , it gets changed. and also cricket service doesnt use as sophisticated servers for handling mms as lets say "sprint" so we cricket people have to make changes to get our mms to work . BUT in a nut shell i have successfully got mms to work with the latest PPCKITCHEN rom release.
It took me 5 1/2 hours to figure out y i couldnt get PPCKITCHEN to work on my computer./ had to use a utility to remove netframe work and then download a 200mbsfile of netframe 3.5 and that did the trick.
3)Why can't I get *228 to program my phone after changing prls?
BECAUSE U DONT HAVE YOUR SPC or MSL CODE SET TO 000000!
PERIOD!!!! im not yelling just letting u know exactly y/ ive done this successfully twice to my current titan/ cricket sets its SPC code for all its phones to 000000/ so when it trys to access your phone it cant get pass the code/ i have the modem drivers and program u will need (which i dont know if we are aloud to mention it here) but i have it and will pass it on to u/
4)Why does the evdo change to 1x when in call and on net?
now naturally your phone will switch betwwen evdo and 1x /1x when you recieve or make a call send a text msg etc, and evdo when using data/
connection/ Now i also expierenced a couple months back when my phone all of a sudden would not stay in evdo mode no matter what i did/ i think it was a certain rom and radio combo which fixed it, but anyhow first things first.
PS by the way, these 2 files have gotten me unstuck from the boot loader mode a bunch of times and i would say the most valuable files to have are these two/
i will PM u ok , lets just take it slow k, your situation sounds like a bunch of software issues which is ALOT better than defective hardware issues
JPWHRE
sorry if my spelling suks im a lil tired/ I did get a PM from jambrose/ So just to let u know, that u should give him a big thanks/ not that i wouldnt of helped u if i came across your post but to be honest i dont read alot of the posts anymore/
And by the way jambrose, its good to hear from u. Im glad u r out there helping these guys, and keeping the support going.
hey JPWHRE
for some reason i cant send u an attachment in a PM so i guess ill post the files and info here ok
1)First run the "titan RELOCKER" file with your
phone connected to active
sync, it should return your
phone to the stock
bootloader/
2)Next run the "titan unlocker"
next , this will allow u to
install olipro 1.20/ after
running the unlocker and
following its instructions u
might be in bootloader mode
if i remember right
3) your phone should be in
bootloader mode now,(if it
aint, put it in boot mode) so
just run the "ROM update
utility" in the "olipro 1.20
unlocker" folder im sending u
k/
** u may still be in
bootloader mode when u r done
installing the 1.20 BL, NO
PROBLEM, just run the
DisconnectActiveSync.exe file
first in the "Unlockboot
folder" i have included, THEN
the "titan_exitbl.exe"/
THIS should cause your phone
to reboot.
4)next i believe we r ready
to load radio ( for some
reason the radios can only be
installed using olipro 1.20)
in the folder i have the
radio in, u will run the ROM
update utility and install
the radio.
5) Next u will need to update
your bootloader to 2.40, so
that u can load a custom rom.
Just run the
"Hard-240SPL-MFG.exe" file
ive included and it should
update u with no problems,
Once this has been done u can
now go and install ROM of
your choice/ *** PPCKITCHEN latest rom release allows MMS for us cricket folks**** and if u installed the ROM and cant get the MMS to work just PM me and ill give u the instructions to enable it, there is some adjustment that will need to be made first , so dont worry , we will get it working k**
6) well my friend this has
taken alot out of me/ i will
post these instructions im
giving u under your thread
that way incase i have missed
something, somebody can
inform us/
PS GOOD LUCK MY FRIEND, and
if u get stuck or have a
question, just PM me, but if
i dont get back to u right
away, be patient, k
heres a link to all the neccessary files, its to big to add as an attachement:
http://rs568tg.rapidshare.com/files/143162512/LOCK_un_LOCK_files.rar
bunvilla
jpwhre said:
i try, realy i do. have done all with no help (not that i haven't asked) but i can only get so far. really kills me to read signatures of others bragging how they have their titan going with gps,mms,net (everything including kitchen sink) on cricket. yet i get nowhere, even when 3 ask. i know that ppcgeeks is almost a mirror of this site, and i don't mean to ruffle feathers, but ppc only seems to be a good place to SEARCH, i'm having no luck with forum.ppcgeeks.com/forumdisplay.php?f=48
Click to expand...
Click to collapse
DID THIS HELP U???? I havent heard one way or the other from u so i am wondering if this worked for u ??
Just looking for a place to start...
I have Cricket on my PoS Cricket phone. Unlimited mobile web on my account. I also have an originally T-mobile Wizard which I've been using just as a mini-laptop and to learn to cook, flash, etc on...
I'm about to buy a Mogul which is supposedly Cricket flashed and/or a Sprint phone originally. As I understand it, either of these should be qualifiers for a fully functional Cricket Smartphone, yes? I want my voicemail, text messages, to surf the web via my cell connection as well as wifi. Bluetooth, gps, and just about anything else are icing that isn't -truly- a requisite for me. What thread should I start reading for -any- Rom that will accomplish the above. I don't mind if the rom is "too blahh". If you are opposed to singling out a specific rom that you (as a cricket customer with a running mogul) like...You could always post a few that you know work. I understand how the "best rom" politics go.
Also, if there are any other considerations I should keep in mind, please reply!
The problem: I flashed a radio to my device that is (obviously) incompatible with my device (if you really want the details, its embarassing, but I'll post if necessary). My phone freezes on bootup, and never initializes the Radio/ROM (and for good reason).
This is what happens now: If my phone is off, I can turn it on, but I only get the first boot up screen, and the red numbers in the bottom right-hand corner never appear. At that point, I cannot turn off my phone without taking out the battery. If I take out the battery and put it back in, and attach the phone to a charger (or USB cable), the light on the phone will "breathe", as if its charging. However, if I then disconnect the phone, the light will CONTINUE breathing.
I also cannot turn on the phone while its connected to either the charger or USB cable.
My phone is Hard-SPL'ed and Security Unlocked. But the real issue I'm having is that I can't get into Bootloader to flash something else. Apparently, I've corrupted the Bootloader. When I turn the phone on, and press the reset button while holding Vol-down, the phone just goes black.
I might be okay getting a warranty exchange if not for this: I can still hard reset my phone. It doesn't make any sense to me, but when I turn it on, I can do the soft-reset-button, Vol-down, Action button combo, and my phone flashes through Bootloader to give the the hard reset menu. It flashes that screen just long enough to see that my phone has 1.90Olinex as the SPL. So, I think I may be screwed, unless someone here can help.
My wife is very . . . upset . . . about this, and is worried that we'll have to spend money because of my continuous "tinkering" with my phone.
Any help anyone can offer is greatly appreciated.
I know this is my own stupid fault, and I should've known better, but it would be nice to get confirmation from the experts here that I'm just going to have to chalk one up in the "L" column at this point.
Q
Have you tried to flash from the SD card?
Hi Captain_Throwback,
Try copying Raph Radio 1.11.25.01 to the root of a FAT32 SD Card ... you'll need to rename the .NBH to RAPHIMG.NBH.
Pull the SIM out of the phone and power it back on as per usual; I've noticed that the phone "blacks out" for a bit but then switches to flash mode.
Good luck.
PS: suggest getting the large carry-on with the wheels for the guilt trip - heaven knows it's come in handy for me
That's a bummer, man. You gotta at least 'fess up part of the story to prevent someone else from falling into the same trap (however unlikely that may be). And maybe, just maybe, it will help someone else figure out how to fix your problem.
What radio did you try and flash.
Hopefully it wasn't the new Rhodium radio? Or a Rose radio?
I have done this a few times on my tilt, all I did was put it into the boot loader, it worked from hard reset screen as well, and flashed the rom via activesync. I am assuming that you are not able to get a sync, or have you tried yet? I know my fize will also sync [to flash] from bootloadr.
Captain_Throwback said:
The problem: I flashed a radio to my device that is (obviously) incompatible with my device (if you really want the details, its embarassing, but I'll post if necessary). My phone freezes on bootup, and never initializes the Radio/ROM (and for good reason).
This is what happens now: If my phone is off, I can turn it on, but I only get the first boot up screen, and the red numbers in the bottom right-hand corner never appear. At that point, I cannot turn off my phone without taking out the battery. If I take out the battery and put it back in, and attach the phone to a charger (or USB cable), the light on the phone will "breathe", as if its charging. However, if I then disconnect the phone, the light will CONTINUE breathing.
I also cannot turn on the phone while its connected to either the charger or USB cable.
My phone is Hard-SPL'ed and Security Unlocked. But the real issue I'm having is that I can't get into Bootloader to flash something else. Apparently, I've corrupted the Bootloader. When I turn the phone on, and press the reset button while holding Vol-down, the phone just goes black.
I might be okay getting a warranty exchange if not for this: I can still hard reset my phone. It doesn't make any sense to me, but when I turn it on, I can do the soft-reset-button, Vol-down, Action button combo, and my phone flashes through Bootloader to give the the hard reset menu. It flashes that screen just long enough to see that my phone has 1.90Olinex as the SPL. So, I think I may be screwed, unless someone here can help.
My wife is very . . . upset . . . about this, and is worried that we'll have to spend money because of my continuous "tinkering" with my phone.
Any help anyone can offer is greatly appreciated.
I know this is my own stupid fault, and I should've known better, but it would be nice to get confirmation from the experts here that I'm just going to have to chalk one up in the "L" column at this point.
Click to expand...
Click to collapse
Damn I'm sorry to hear about your issue and i feel for ya because I did some stupid **** myself a lil' while back if you remember. Your advice to reflash the oem rom worked for me 100%. Have you tried hard resetting and then trying to get into bootloader mode?
AllTheWay said:
What radio did you try and flash.
Hopefully it wasn't the new Rhodium radio? Or a Rose radio?
Click to expand...
Click to collapse
Ok, I'll tell you . . . it wasn't a Rose radio (I know P1Tater bricked his phone that way) . . . but I figured, the Rhodium, its got the same hardware, right? I mean, T-Mobile is a GSM carrier . . . If I patch it for Raph, it may work . . . even though the radio number is so much different . . . I should still be able to get into Bootloader if it doesn't work, because I'm HardSPL'ed . . .
But no. I can't get into Bootloader. Believe me, I've tried. Every time I try, the phone just goes black. And I have a nice stock AT&T ROM on my Storage Card ready to flash, if only I could get it onto the phone.
I tried plugging into the computer, but it won't recognize the phone at all.
I wish it was REALLY bricked, but the fact that I can still hard reset it is very disappointing.
Captain_Throwback said:
Ok, I'll tell you . . . it wasn't a Rose radio (I know P1Tater bricked his phone that way) . . . but I figured, the Rhodium, its got the same hardware, right? I mean, T-Mobile is a GSM carrier . . . If I patch it for Raph, it may work . . . even though the radio number is so much different . . . I should still be able to get into Bootloader if it doesn't work, because I'm HardSPL'ed . . .
But no. I can't get into Bootloader. Believe me, I've tried. Every time I try, the phone just goes black. And I have a nice stock AT&T ROM on my Storage Card ready to flash, if only I could get it onto the phone.
I tried plugging into the computer, but it won't recognize the phone at all.
I wish it was REALLY bricked, but the fact that I can still hard reset it is very disappointing.
Click to expand...
Click to collapse
This happened to me (sort of.) I flashed a diamond radio to my fuze... without security unlocking it first. Symptom wise, Exact same thing happened. I was able to (after days of tinkering) get it into bootloader from the hard reset screen. I just kept pressing the Hard rest sequence over and over while connected to USB. I noticed, one time, I got the USB at the bottom. Don't know how, don't know why, it just happened, I was then able to flash the Stock Cing ROM. Wierd stuff, But lucky. Hope you get it back on board. Is it insured? Because it would really suck if someone stole your bricked fuze.
Intertrochanterica said:
This happened to me (sort of.) I flashed a diamond radio to my fuze... without security unlocking it first. Symptom wise, Exact same thing happened. I was able to (after days of tinkering) get it into bootloader from the hard reset screen. I just kept pressing the Hard rest sequence over and over while connected to USB. I noticed, one time, I got the USB at the bottom. Don't know how, don't know why, it just happened, I was then able to flash the Stock Cing ROM. Wierd stuff, But lucky. Hope you get it back on board. Is it insured? Because it would really suck if someone stole your bricked fuze.
Click to expand...
Click to collapse
It is insured, and paying $125 is better than having to buy a brand new phone, but if I can avoid spending money, my wife would be much happier .
I can hard reset just fine . . . if only the phone would stay on the bootloader screen when doing that . . . but it doesn't. I assume the bootloader has been corrupted, which is why the phone blacks out when trying to enter bootloader mode. I'll keep trying, I guess. I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Captain_Throwback said:
I can hard reset just fine . . . if only the phone would stay on the bootloader screen when doing that . . . but it doesn't. I assume the bootloader has been corrupted, which is why the phone blacks out when trying to enter bootloader mode. I'll keep trying, I guess. I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Click to expand...
Click to collapse
Try plugging it into a car battery, or something like that, and fry the sucker. That's my only piece of advice.
Captain_Throwback said:
I can't make it any worse. Actually, if I could, I'd be better off, so that way they can't find out my phone is Hard-SPL'ed.
Click to expand...
Click to collapse
You could make it worse if you get the white sticker wet and make it turn pink, but that would be very bad for you.
You are at the point to where you cant move beyond your current predicament in wither way. Im afraid I see no other alternative than to pay the $125.
Maybe you could sell your Fuze on Ebay for 125 to cover your insurance cost and you could make a notation on the Ebay site saying something like 'PARTIALLY USED FUZE' like that Carfax commercial does.
update
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Keep us updated dude. Also, if you slip the guy $50 he may do the free warranty replacement for you... it might save you $75 and you wont have to use up one of your insurance claims.
Captain_Throwback said:
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Click to expand...
Click to collapse
Crap, sorry to hear that. HAAH, just walk into the ATT store and say," I tried turning the phone on and this is what happened." And that you have never heard of XDA forums, roms, and though a radio was only for people in trucks or that wear camo.
iceman4357 said:
Crap, sorry to hear that. HAAH, just walk into the ATT store and say," I tried turning the phone on and this is what happened." And that you have never heard of XDA forums, roms, and though a radio was only for people in trucks or that wear camo.
Click to expand...
Click to collapse
That might work, if I hadn't bought the phone from my best friend, who just happens to manage an AT&T store. He actually knows that I had a custom ROM on my phone, and called ahead to the repair shop to let them know I was coming, and he said hopefully they won't notice the SPL in my bootloader if they try and hard reset it. So it is possible they'll just give the phone a cursory look to make sure its really not working, and then go ahead with a warranty replacement. I'll be sure to let everyone know what happens. In the meantime, the word of the day is "dumbass", LOL.
Farmer Ted said:
Try plugging it into a car battery, or something like that, and fry the sucker. That's my only piece of advice.
Click to expand...
Click to collapse
That's what I would do.
Captain_Throwback said:
My phone is still bricked, but I'm taking it to a repair shop after work, where I'll find out whether I'll be getting a free warranty replacement, or paying $125 for an insurance replacement. At least I've been able to successfully determine that a Rhodium radio cannot be flashed to a Raphael. So no one else has to try it .
Click to expand...
Click to collapse
Honestly I would not take it to the repair shop.
Here is what I would do. Call the warranty replacement department at AT&T. 1-800-801-1101. Tell them that you woke up and now your phone won't turn on. Once you go through all the steps they have to do to fix it, then they will ship you a replacement Fuze right away. The refurbished Fuze will have everything except for a battery and a back cover. Typically when I did this I received a new one the next day that I called.
Now take your battery out of your phone and your SIM card and microSD card. Put your phone in the microwave for 2 seconds. Walla. Now it's bricked and AT&T will have no way to tell if you have HardSPL or a cooked ROM on your phone. Trust me. It will work.
When you get your new phone just send the phone back in packing material that they provide to you and you won't have to spend any money to get a new phone or spend money to fix a phone.
Just do what I told you about. I promise it will work. Just trust me. I've done it before and it worked like a charm. No worries. Trust me, I'm not trying to lead you down the wrong path. I'm trying to get you a replacement just like I got when I bricked my last fuze trying out different radios. And use the phone number that AllTheWay posted just above me once you do what I told you.
P1Tater said:
Just do what I told you about. I promise it will work. Just trust me. I've done it before and it worked like a charm. No worries. Trust me, I'm not trying to lead you down the wrong path. I'm trying to get you a replacement just like I got when I bricked my last fuze trying out different radios. And use the phone number that AllTheWay posted just above me once you do what I told you.
Click to expand...
Click to collapse
I'm curious what it is you told him, in case i'm in a similar position at any point !!
Lemme kno please here or PM is cool!
Thx
JFlitt
AllTheWay said:
That's what I would do.
Honestly I would not take it to the repair shop.
Here is what I would do. Call the warranty replacement department at AT&T. 1-800-801-1101. Tell them that you woke up and now your phone won't turn on. Once you go through all the steps they have to do to fix it, then they will ship you a replacement Fuze right away. The refurbished Fuze will have everything except for a battery and a back cover. Typically when I did this I received a new one the next day that I called.
Now take your battery out of your phone and your SIM card and microSD card. Put your phone in the microwave for 2 seconds. Walla. Now it's bricked and AT&T will have no way to tell if you have HardSPL or a cooked ROM on your phone. Trust me. It will work.
When you get your new phone just send the phone back in packing material that they provide to you and you won't have to spend any money to get a new phone or spend money to fix a phone.
Click to expand...
Click to collapse
Agree with this. If your friend works at the store and knows what you have done, I wouldnt go there. Call the number, fry the damn phone and get a new one. We need you back on your feet to help solve ROM issues my friend.
Ok guys, yes...I'm a noob...
I did a master reset on the phone and now I get nothing...
It won't turn on unless I plug it in to the charger.
When it does turn on, all I get is a few vibrations, and
the icons at the bottom light up.
I can get windows to see the two "drives" of the phone,
but they are empty (have 0 bytes if you right click and check properties. If you left click, it says please insert disc).
I've tried a new battery and my battery turns another phone on...
I've also tried two cables and two PCs.
It hasn't been rooted or messed with, the battery died and I went to charge
it and nothing...I left it on charge overnight and at least see a bit life.
Any ideas, or should I just send it on to HTC??
So that others have a better idea... can you get into hboot or fastboot?
try a nwe battery
xboarder56 said:
try a nwe battery
Click to expand...
Click to collapse
he said he already tried a new charged battery, so it can't be that. I'm thinking his phone's OS might be gone so he should probably installed a RUU or something.
In the dark...
Can't see anything come up on screen...
no idea what mode it's in, hboot, fastboot or anything ??!?!!
Think it might be possible to install just a stock (Tmobile) RUU?? If so, how ?????
karaokekarnival said:
Can't see anything come up on screen...
no idea what mode it's in, hboot, fastboot or anything ??!?!!
Think it might be possible to install just a stock (Tmobile) RUU?? If so, how ?????
Click to expand...
Click to collapse
if you can't get into hboot/fastboot (totally forgot which, basically same thing) then you can't do the RUU
Hmmm, OK
Do you think there is anything that I can do to get it running ??
And where do I find the thanks button ???
karaokekarnival said:
Do you think there is anything that I can do to get it running ??
And where do If ind the thanks button ???
Click to expand...
Click to collapse
if you rooted and custom recovery you could but right now you out of luck you gonna have to return
Duh, I found the thanks button !!!
I was afraid of that...guess I'll ship it off Monday. If anyone knows a way before then, let me know...can't hurt to try, eh ??
karaokekarnival said:
Duh, I found the thanks button !!!
I was afraid of that...guess I'll ship it off Monday. If anyone knows a way before then, let me know...can't hurt to try, eh ??
Click to expand...
Click to collapse
There isn't a way if your phone isn't detected or you can't get into hboot. Meaning you have no control over your phone to do anything.
Anyways, for htc warranty exchanges that is done with tmobile... they usually send you the phone first and then you send one back in return. Unless your policy is different. So i suggest you calling them immediately.
Update
I can go into control panel and "see" the phone listed in device manager under portable devices as "F" and "G". Click properties and they are found as HTC devices. Does this mean I can do anything to it? I just want my phone back working as fast as I can. Sending it in will take a while. I bought this phone for the camera. We have a 1 yr old and don't wanna miss the Christmas pics...
karaokekarnival said:
I can go into control panel and "see" the phone listed in device manager under portable devices as "F" and "G". Click properties and they are found as HTC devices. Does this mean I can do anything to it? I just want my phone back working as fast as I can. Sending it in will take a while. I bought this phone for the camera. We have a 1 yr old and don't wanna miss the Christmas pics...
Click to expand...
Click to collapse
are you on tmobile? they usually send within 2 days, their distribution center is in texas or something. I usually get it next day.
You said your screen doesn't turn on or doesn't show anything. It's gonna be hard to determine what you're doing even if you can run ADB to put it in oem fastboot and to flash a RUU that way. But it sounds like your display might be a problem too then. It'll be quicker to do an exchange. If you call in today, they'll probably ship it on monday and you'll get it wednesday latest. unless you have tmobile insurance plan. it should be next day and you'll get it tuesday.
Thanks
Well that might work for me then...can't hurt to give it a try.
Thanks a bunch for letting me know !!!
No problem, I had my fair share dealing with tmobile exchanges lol.
If you purchased directly from tmobile it should be very easy to do an exchange because your warranty is verified.
If you bought it off craigslist/ebay. sometimes the previous users used a different carriers that makes the warranty no longer verified. HOWEVER many customer reps will still try to process the exchange (you can determine by their upbeat personalities lol).
If you run into someone who won't do it, just call again and talk to another rep. Most of the time they will push it through because it's still a newly released phone.
Have you already contacted T-Mobile support? You'll have to talk to them anyway before they agree to replace your phone.
The reason I am asking this is because there might be an unpublished backdoor way to restore your device if your device is not completely (hardware-wise) dead. For example, Dell Streak has a complete firmware image on its internal SD card and you needed to somehow trigger an IPL routine to restore the device to its original condition.
I haven't heard of anything similar on HTC devices yet, but hey, it's just a thought. And if there actually is a way, and you are the first one to post it here, you'll be a hero!
ringochan said:
Have you already contacted T-Mobile support? You'll have to talk to them anyway before they agree to replace your phone.
The reason I am asking this is because there might be an unpublished backdoor way to restore your device if your device is not completely (hardware-wise) dead. For example, Dell Streak has a complete firmware image on its internal SD card and you needed to somehow trigger an IPL routine to restore the device to its original condition.
I haven't heard of anything similar on HTC devices yet, but hey, it's just a thought. And if there actually is a way, and you are the first one to post it here, you'll be a hero!
Click to expand...
Click to collapse
yeah we normally just flash a RUU, but you can't even see the screen, so we can't even be certain that we're in the correct modes to be flashing and stuff. because we require to ADB it to restart in fastboot, but we can't even see if its going to fastboot. or if it already is in fastboot to begin with, so we're not certain which commands to run with the screen being off. Well you can always try commands and it should only work in certain modes, but do you really want to do it blindly? I would rather just exchange the thing.
Not afraid to try....
Well, I can't use it as it is...exchange is a hassle even in 2-3 days. Can't do anything until tomorrow anyway. I was thinking today, I've heard they can port Android to iPhone...there's no fastboot there, is there ??? Soooooo, if it's turning on, I should be able to do something...I want my phone back !!!
Edit: I misunderstood the issue
Sent from my HTC Ruby using xda premium
Please share....
Snargaflab, please share, it might help me or others to think !!
Flashing green light ???
It is now turning on and has a flashing green light, does that mean anything??