Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Odin and Kies don't play well together. Uninstall Kies and try Odin again.
****Non of this is of any importance. Just chill the f**k out and relax****
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
ilovecheesypuffs said:
Keis removed ands still no joy from Odin - Wife getting a bit paniky now
Click to expand...
Click to collapse
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
ilovecheesypuffs said:
Right
I attempted to upgrade to ics last night through Kies, operation failed and phone locked at screen advising need to be redone, have done research and downloaded odin and UK version of firmware but odin keeps failing
Phone is registered with T-mobile in UK
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am becoming rather irritated as dont see any other way of getting phone working again
Any help would be appreciated
Click to expand...
Click to collapse
When you flash via PC odin don't use .pit file and don't tick repartition (leave all options in odin default). Rom file open as PDA. It should work.
Regards
Sun90 said:
try with a different USB port/cable and see ma8 if the same doesnt wrk then try with a diff computer and check.
Click to expand...
Click to collapse
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
ilovecheesypuffs said:
3 different cables and 5 different ports tried, no other pc in house .
is there nothing else or am i buggered and forever frowned at by my wife for breaking her phone
Click to expand...
Click to collapse
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
preseodymium said:
If you can go into download mode, you can flash another firmware from other regions.
Sent from my potato.
Click to expand...
Click to collapse
ok bit noobish, i can use say USA i9100 firmware and try that?
ilovecheesypuffs said:
ok bit noobish, i can use say USA i9100 firmware and try that?
Click to expand...
Click to collapse
Yes. So long as it is for your firmware.
Sent from my potato.
Related
Hi Guys
I was having some trouble connecting my Galaxy S2 to my comp this evening to transfer some photos. Downloaded and installed Kies and it said there was a software update. Went through with it, upgrading to Icecream Sandwich (or w/e its called) but during the installation process it failed (can't remember the exact error message).
My phone is now unable to switch on, just showing the error message:
"Firmware upgraded encountered an issue. Please select recovery mode in Kies and try again."
Unfortunately, Kies will not locate my device and will not go through with recovery.
After some searching I came accross this forum, and specifically http://forum.xda-developers.com/showthread.php?t=1449771]this thread.
I've worked my way through that. I can flash the kernel succesfully through Odin (says pass) but when I try and flash the firmware it fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_NEW_BOOTLOADER.tar.md5 is valid.
<OSM> I9100PBVKL2_I9100PORALB1_I9100PBVKL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Get the same trying to use Bootloader aswell.
Now I'm guessing my warranty is now voided, so is there anything I can do to save my phone or is it completely b0rked?
Help much appreciated.
Some details from under my battery
Model GT-I9100P
SSN: I9100PGSMH
Any other details you need?
Bare in mind i cannot get into the phone at all.
Is it possible that I need to use the ICS recovery package rather than the Gingerbread?
i think u need full rom with pit and ur phone will work
Hi, thanks for your reply.
Unfortunately I'm in work and don't have a comp with full access. Any chance you could possibly link the files I need or at least point me in the right direction.
Many thanks.
So yeah, for some days ago i have installed a custom rom this one : Leaked Android 4.2.2 XXUFME3 ROM for Galaxy S III
it worked fine but i wanted to get back to stock rom.
So i downloaded a stock rom ( for nordic countries )
After this i re partioned my s3, i used a file for 16 gb cause its my model. after this the phone turned on and i saw samsung galaxy s3 logo blincking, nothing else heppend. But i knew i wasnt done and took the battery out and back, and entered download mode.
Now i chosed a rom with PDA button, i unchecked re partion and hited start button. Odin was stuck at "setup connection".
I have installed and reinstalled drivers, installed and uinstalled kies, i have tried this on all of my usb ports, i tried this on my other pc with installed drivers etc. Nothing WORKS!!!! i am a noob with Android and really need a help. i Have working to get it work 4 hours and nothing...
Btw i have no sd card in my s3.
It looks like i dont have any firmware on my phone now, but i can still enter download mod, but not recovery mod.
What can i do??
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
JJEgan said:
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
Click to expand...
Click to collapse
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
kris222 said:
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
Click to expand...
Click to collapse
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
sriram231092 said:
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
Click to expand...
Click to collapse
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
kris222 said:
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
Click to expand...
Click to collapse
did you do everything as mentioned in this site? http://androidromupdate.com/2012/06...ung-galaxy-s3-gt-i9300-stock-rom-i9300xxale8/
i did!
the only thing i did wrong was to re partition it......
now i dont know how to get it work...
Try flashing again but with the newest ROM from NEE, if flash successful, probably will boot loop again, enter to recovery mode and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=1646610 2nd post.
Good luck
Regards
[email protected]
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Ver3go said:
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
anyone??
kris222 said:
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
Click to expand...
Click to collapse
Do all in one thick re-partition! And put the pit. And choose pda with your rom
Sent from my GT-I9300 using xda premium
Pretty fun that non experienced people are flashing stuffs, rooting etc etc without reading two or three times before so they learn about what could happen if anything are done the wrong way..
In worst case, warranty is the only solution to fix this and re-program PIT layering of your phone. It may cost if there is any sign of modifications / flash counter above zero...
Sent from my GT-I9300 using xda app-developers app
Go to http://forum.xda-developers.com/showthread.php?t=1944196 post #6
Regards
[email protected]
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
?????
kris222 said:
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
Click to expand...
Click to collapse
Your phone is dead sure worst wont do
Sent from my GT-I9300 using xda premium
I think they will repair it for free
Sent from my washing machine using xda premium
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Look for @Hopper8 thread. Great thread lots of info on Odin problems
No Luck!
andrewwright said:
Look for @Hopper8 thread. Great thread lots of info on Odin problems
Click to expand...
Click to collapse
Hi,
I read through and tried flashing with siyah v6 but even that failed.
Not really sure what the issue is!
mosesadarsh said:
I am from India, and I was using the Galaxy s2 with Jelly Bean 4.1.2(installed from KIES). The phone suddenly crashed and only download mode is accessible. I downloaded the stock firmware from sammobile and tried odin3 v3.07, but it isnt working and the 0:[com3] background is blue.
The firmware i tried booting it with is I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md5
i uploaded this by clicking on the PDA button and this how far it got to:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSK_I9100ODDLSA_I9100DDLS9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've run out of ideas and forums that I've gone through ! Some one please help!
Click to expand...
Click to collapse
Doesnt seem like the phone is charging either!!
Flash philz kernel and then you should be able to get to recovery then flash a custom Rom
Read this bro
http://forum.xda-developers.com/showthread.php?t=2101610&page=2
Hope it helps !!
I tried everything possible but nothing worked. . I got stuck at factoryffs every time then hit xmit data failure. . M sure I hard bricked it now! ! Must be the motherboard. .
can someone please post links to the philz kernel and a stable india version JB firmware !! Please please ... im desperate!!
Search!! Dont be lazy its not hidden or hard to find.
seriously bro?? I found the thread to that kernel but that list is never ending.. God knows which kernel is for my phone!!
Only comment if you have answers please !!!!
All the videos that i watched online show how to install philz kernel on a working phone.
My phone is kinda dead... so what needs to be done after flashing philz kernel? Tell me the next steps please..
Does it still go to download mode? Does odin still see it?
I tried flashing my phone with philz kernel but even that failed...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSK-ODD-4.92.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<OSM> All threads completed. (succeed 0 / failed 1)
Make is easy on your self and flash lss firmwear and flash lss kernel "near the top of download list" chances are you dont have an os now odin has failed to flash. Hooper8 thread has good info on flashing problems! Read that before you try.
Pics clicked a minute back... does this help...
Pls read hooper8 thrsad
Any joy now op?
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
mosesadarsh said:
Nope.. No luck... nothing goes beyond the nand write start! message.. Im done trying stock rom from sammobile, siyah v6, philz kernel.. nothing succeeded
Click to expand...
Click to collapse
Same problem here, my phone was working fine then all of a sudden i noticed it was dead, tried rebooting it, nothing happened, boot loop, tried to access CWM, i got the lower section menu of CWM but nothing else, a black screen with the buttons.
So next i said, let me use odin to flash a new kernel. That failed and ever since that failed, i cannot do anything except enter download mode. If i power the phone on, i get a [phone-problem-computer] image in yellow with text that says somehting like problem loading software, please conntect to kies recovery mode. of course that never works.
And everytime i try to flash absolutely anything on this device, Odin DOES see the device, and the second i press flash/start, when it reacher nand write start, it hangs there, stuck doing nothing.
I took the phone to a friend who has an Riff jtag box, he soldered his jtag to the phone and said the memory chip is not dead, i can read its capacity normally. But when he tried to write to it, it did not work, kept giving him errors, he said he has never encountered such a behavior before. And then i had to leave.
Up to now, my phone is still dead and i have no idea what to do. It only enters download mode, but at the same time, this is useless since flashing anything simply does not work. Anyone knows what the reason could be?
FYI, i was on NeatROM 5.5, which comes with Philz Kernel.
NAND is stuffed/corrupted. How/why - who knows ? Motherboard replacement if you've already tried JTAG. Could be something hardware going on that caused the chip to become 'damaged'.
I made the mistake of trading phones with a guy whose GS4 was rooted with SS recovery and there were no MSD in it when we traded. I brought it home, restarted it. And it began to get stuck on the "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN." which I know to not use Kies as it was useless to me when I had my first GS4 at time of launch. I am fairly new at this with a gs4. I have tried and tried with ODIN v3.07. I have been on here and looking through forums and I went to other forums besides xda with countless different trials. NONE have been even the slightest bit helpful...
I was wondering since it was stuck on the devilish yellow triangle screen. I can not even get past this to get the launcher... could ADB be the problem since I can't get it to even boot up to enable it?
before anyone asks, to which will waste both our time....
yes, i have used the stock vz firmware and placed it in the PDA section in ODIN
THIS IS WHAT I GET EVERY TIME.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
ALL HELP IS MUCH APPRECIATED!!:good:
Are you sure you were on ME7? You might need to flash a newer firmware.
Sent from my NCC-1701 using Tapatalk.
Definitely need to flash newer firmware
degradedtree69 said:
I made the mistake of trading phones with a guy whose GS4 was rooted with SS recovery and there were no MSD in it when we traded. I brought it home, restarted it. And it began to get stuck on the "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN." which I know to not use Kies as it was useless to me when I had my first GS4 at time of launch. I am fairly new at this with a gs4. I have tried and tried with ODIN v3.07. I have been on here and looking through forums and I went to other forums besides xda with countless different trials. NONE have been even the slightest bit helpful...
I was wondering since it was stuck on the devilish yellow triangle screen. I can not even get past this to get the launcher... could ADB be the problem since I can't get it to even boot up to enable it?
before anyone asks, to which will waste both our time....
yes, i have used the stock vz firmware and placed it in the PDA section in ODIN
THIS IS WHAT I GET EVERY TIME.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
ALL HELP IS MUCH APPRECIATED!!:good:
Click to expand...
Click to collapse
This has happened to me about four times with my phone. I was able to fix through a process of Kies and Odin. It seems that if you do all that you can in Kies, as far as attempting to re-install the stock firmware. Kies has the drivers you need in order for Odin to work. You will need to run through the Kies process (it will fail), but you will get the drivers you need. You will then need to boot into download mode and do the Odin flash process. This is all assuming you have the correct files for Odin. You will need to flash the stock build afterwards unless you have a backup and are able to access safestrap which i doubt you will have.
i have galaxy s3 the international model
right now it stucks on the logo. i can get into download mod, but not into recovery.
i've tried to flash stock version. i used first the one file method . didn't work, then i tried the 4 files method
with bootloader etc... but it failed again.
i changed cables, usb ports, nothing!
here's the odin log.
___________________
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMG4_I9300ITVEML2_I9300XXEMG4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
could it be an hardware issue. or theres still chance
thanks..
Check if it says "Custom" on "Current Binary"
This is probably a cause of half SDS(Sudden Death Syndrome),basically your device is dead
Dinkec27 said:
Check if it says "Custom" on "Current Binary"
This is probably a cause of half SDS(Sudden Death Syndrome),basically your device is dead[/Q
in download mode it says:
custom binary download: no
currnet binary: samsung official
system status: official
so maybe its not??
Click to expand...
Click to collapse
I think your device is dead
tyler6389 said:
I think your device is dead
Click to expand...
Click to collapse
i think too, but is there any last options i could try.. like flash it with pit files???