Samsung galaxy s3 international will not turn on. - Galaxy S III Q&A, Help & Troubleshooting
So yeah, for some days ago i have installed a custom rom this one : Leaked Android 4.2.2 XXUFME3 ROM for Galaxy S III
it worked fine but i wanted to get back to stock rom.
So i downloaded a stock rom ( for nordic countries )
After this i re partioned my s3, i used a file for 16 gb cause its my model. after this the phone turned on and i saw samsung galaxy s3 logo blincking, nothing else heppend. But i knew i wasnt done and took the battery out and back, and entered download mode.
Now i chosed a rom with PDA button, i unchecked re partion and hited start button. Odin was stuck at "setup connection".
I have installed and reinstalled drivers, installed and uinstalled kies, i have tried this on all of my usb ports, i tried this on my other pc with installed drivers etc. Nothing WORKS!!!! i am a noob with Android and really need a help. i Have working to get it work 4 hours and nothing...
Btw i have no sd card in my s3.
It looks like i dont have any firmware on my phone now, but i can still enter download mod, but not recovery mod.
What can i do??
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
JJEgan said:
Reads as you may have bricked your phone as you have for some unknown reason repartitioned it ..
install stock rom via Odin and post the Odin results .
jje
Click to expand...
Click to collapse
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
kris222 said:
omg... now odin cant see my phone...., but it was always stuck at setup connection, or the odin have stoped working. I will reset my pc and post result.
Click to expand...
Click to collapse
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
sriram231092 said:
no need to reset your pc. change the usb port and check it. there's no need for you to panic.
Click to expand...
Click to collapse
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
kris222 said:
okey i have pluged it to another computer and now it comes up in odin. but it wont install . here
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
and here it ends..... after like 20 min the message comes up and says that 0 complited 1 failed. so what now?
Click to expand...
Click to collapse
did you do everything as mentioned in this site? http://androidromupdate.com/2012/06...ung-galaxy-s3-gt-i9300-stock-rom-i9300xxale8/
i did!
the only thing i did wrong was to re partition it......
now i dont know how to get it work...
Try flashing again but with the newest ROM from NEE, if flash successful, probably will boot loop again, enter to recovery mode and do a factory reset.
http://forum.xda-developers.com/showthread.php?t=1646610 2nd post.
Good luck
Regards
[email protected]
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Ver3go said:
You'll need to re-partition now! You probably screwed pit partition!
Try with another pit file and make sure its a legit one!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
anyone??
kris222 said:
Hi i downloaded pit file for 16 gb model. After instlling it it said pass (green) on odin. After this i i tried to install the stock rom, but it failed....
Here is log of Odin :
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Help???
Click to expand...
Click to collapse
Do all in one thick re-partition! And put the pit. And choose pda with your rom
Sent from my GT-I9300 using xda premium
Pretty fun that non experienced people are flashing stuffs, rooting etc etc without reading two or three times before so they learn about what could happen if anything are done the wrong way..
In worst case, warranty is the only solution to fix this and re-program PIT layering of your phone. It may cost if there is any sign of modifications / flash counter above zero...
Sent from my GT-I9300 using xda app-developers app
Go to http://forum.xda-developers.com/showthread.php?t=1944196 post #6
Regards
[email protected]
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
?????
kris222 said:
So there is nothing i can do? just go to service....?
And because i have installed custom rom i have no waranty.... is it expensiv to fix?
btw i heard of a 3 part rom with mx.pit, would it help or would it make it wors?
Click to expand...
Click to collapse
Your phone is dead sure worst wont do
Sent from my GT-I9300 using xda premium
I think they will repair it for free
Sent from my washing machine using xda premium
Related
[Q] Odin fails at modem.bin
Hi, I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it. I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!! Every time i want to flash with Odin it fails in the beginning of the process, see below: Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version. <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> boot.img <ID:0/005> NAND Write Start!! <ID:0/005> cache.img <ID:0/005> hidden.img <ID:0/005> modem.bin <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason. Any help what is going wrong or what i should try to do? Thanks a lot far any help. Dave
Even it is a generic question you might get an answer if you post it in the correct forum. You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000. davaze said: Hi, I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it. I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!! Every time i want to flash with Odin it fails in the beginning of the process, see below: Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version. <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> boot.img <ID:0/005> NAND Write Start!! <ID:0/005> cache.img <ID:0/005> hidden.img <ID:0/005> modem.bin <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason. Any help what is going wrong or what i should try to do? Thanks a lot far any help. Dave Click to expand... Click to collapse
BeeGee_Tokyo said: Even it is a generic question you might get an answer if you post it in the correct forum. You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000. Click to expand... Click to collapse Ooops, sorry my mistake! Moved it already. Thanks.
[Q] Help unbrick my phone (soft brick)
Hi all last week I took my phone out of my pocket and it was turned off, I tried turning it back on and it just freezes on the Galaxy boot screen, my phone was running a stock ROM... Whats happened ???? I've tried flashing via odin I've tried flashing via the MAC version I've tried two or three different stock ROM's downloaded from Sammobile and Samsung updates And all I get is FAIL, FAIL, FAIL...... <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100XWLSW_I9100H3GLS5_I9100NELS1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Can't open the serial(COM) port. <ID:0/005> Added!! <OSM> All threads completed. (succeed 0 / failed 1) <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Can't open the serial(COM) port. <ID:0/005> Added!! <OSM> All threads completed. (succeed 0 / failed 1) <ID:0/005> Removed!! <ID:0/003> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100XWLSW_I9100H3GLS5_I9100NELS1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation.. <ID:0/003> Get PIT for mapping.. <ID:0/003> Firmware update start.. <ID:0/003> cache.img <ID:0/003> NAND Write Start!! <ID:0/003> Complete(Write) operation failed. <ID:0/003> Added!! <OSM> All threads completed. (succeed 0 / failed 1) Please help me
We got tons of threads like this, care to check them out? BTW see that can't open COM port msg? That's kinda the key. Sent from the little guy
gastonw said: We got tons of threads like this, care to check them out? BTW see that can't open COM port msg? That's kinda the key. Sent from the little guy Click to expand... Click to collapse Thats the first time thats come up, it normally says NAND then freezes then comes up fail................ ive read lots of posts and tried lots of things.
<ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100XWLSW_I9100H3GLS5_I9100NELS1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> cache.img <ID:0/005> NAND Write Start!! <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Alright, tell me what and how you are flashing. Also what device you've got. Sent from the little guy
gastonw said: Alright, tell me what and how you are flashing. Also what device you've got. Sent from the little guy Click to expand... Click to collapse GTi9100 UK three network I've tried the latest ROM from sammobile & Samsung update also the ROM before the latest ?
Alright, I wanna know the how. Killed kies and all? Different usb ports, cables? Sent from the little guy
gastonw said: Alright, I wanna know the how. Killed kies and all? Different usb ports, cables? Sent from the little guy Click to expand... Click to collapse Ive uninstalled KIES (tried it before uninstall and same outcome, used different port, laptop, cable...
Alright, flash jb leak. It's around here somewhere. Edit: While you download that you could flash siyah v6. Sent from the little guy
gastonw said: Alright, flash jb leak. It's around here somewhere. Edit: While you download that you could flash siyah v6. Sent from the little guy Click to expand... Click to collapse whats jb leak ive tried Siyah
It's a samsung test firmware. Google it & download it. Are you sure you went over hopper's troubleshooting thread? Sent from...this is not even my S2
gastonw said: It's a samsung test firmware. Google it & download it. Are you sure you went over hopper's troubleshooting thread? Sent from...this is not even my S2 Click to expand... Click to collapse Which post are you referring to
This one : http://forum.xda-developers.com/showthread.php?p=43179020#post43179020 Sent from a galaxy far, far away
Cheers... is this the leaked ROM http://forum.xda-developers.com/showthread.php?t=1995767 just downloading it now to try it
Hopper8 said: This one : http://forum.xda-developers.com/showthread.php?p=43179020#post43179020 Sent from a galaxy far, far away Click to expand... Click to collapse Good god, where did you come from? You're like a ninja. Sent from...this is not even my S2
Red_Stafford said: Cheers... is this the leaked ROM http://forum.xda-developers.com/showthread.php?t=1995767 just downloading it now to try it Click to expand... Click to collapse Yep that'll do it. We usually download our firmware from Samfirmware around here, but that's the guy. gastonw said: Good god, where did you come from? You're like a ninja. Sent from...this is not even my S2 Click to expand... Click to collapse ... I think I take that as a good thing?.... Sent from a galaxy far, far away
Just tried this 10. Press "PDA" and select the "CODE_I9100XXLSJ.tar file". Press "Phone" and select the MODEM_I9100XXLS6.tar file". Press "CSC" and select the CSC_HOME_OXX_I9100OXXLS1.tar file". and got this <ID:0/005> Added!! <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> boot.bin <ID:0/005> NAND Write Start!! <ID:0/005> Complete(Write) operation failed. <ID:0/005> Added!! <OSM> All threads completed. (succeed 0 / failed 1)
Try another odin version. I still think this is a driver conflict. Sent from the little guy
Hopper8 said: Yep that'll do it. We usually download our firmware from Samfirmware around here, but that's the guy. ... I think I take that as a good thing?.... Sent from a galaxy far, far away Click to expand... Click to collapse being a ninja is always a good thing Sent from the little guy
<ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> zImage <ID:0/005> NAND Write Start!! <ID:0/005> Complete(Write) operation failed. <ID:0/005> Added!! <OSM> All threads completed. (succeed 0 / failed 1) Thats what I get when I try and flash Siyah-s2-v6.0b5.tar Is my nand corrupt do I need to re-partition using PIT file ?
[Q] no download mode and cant flash .tar firmware
hello my friends i have galaxy s2 i9100g and whener i try to inter the download mode it says recover with kies but kies doesnt recognise it i tried to reflash ics rom and used .bit file but it fails everytime here is my odin diplay cache please help me if u can MY Regards <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100GJPLP6_I9100GOJPLP5_I9100GXXLPR_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Set PIT file.. <ID:0/005> DO NOT TURN OFF TARGET!! <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> Sbl.bin <ID:0/005> NAND Write Start!! <ID:0/005> cache.img <ID:0/005> factoryfs.img <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Advanced search Hopper8's threads to find his 'Odin doesn't flash successfully' thread. There's a bunch of stuff you can try in there. The only way you're fixing this is if you get the phone to successfully take an Odin flash, unless you want to take it to a service centre where they'll flash the most recent firmware they have to the phone.
Firmware update failed through Odin
I tried to flash a fresh Samsung firmware for my device [GT-5830i] I get the firmware from sammobile [tried more than one ] yet i get the same message from odin [1.87 - 3.04 - 3.07 - 3.09] on each of them <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> S5830iXXLK3_S5830iDBTLK1_S5830iXXLK1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> sbl.bin <ID:0/005> NAND Write Start!! <ID:0/005> BcmCP.img <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) Click to expand... Click to collapse Kindly ... Give me any ideas to fix this problem ........Thanks
Use your telephone's original cable.
@Dr AMD, Assuming you have s5830i/c/m/s5839i known as cooperVe,, you got the proper drivers installed , no faulty cable ,, you can follow the same instruction i did recommend @ post#6 . Edit: Before proceeding with my advice, turn off Kies, disable AV's and Firewalls or any kind of protection, which might interfere with flashing process (for PC connectivity issue , if involved here > my comments here might be useful ) .
Use splitted firmware...and ,then flash ..
amolgosavi said: Use splitted firmware...and ,then flash .. Click to expand... Click to collapse That worked for me Solved
S6 edge G925F 6.0 downgrade brick?
I tried newest uk beta (BTU) recently and i wasn't happy about the battery etc. Flashed newest lollipop firmware for NEE csc. I have tried so many firmwares and no luck .. :crying: Do i miss something big time? and i am 100% sure about that firmware is right. <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar .md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Added!! <ID:0/005> Odin engine v(ID:3.1005).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> SingleDownload. <ID:0/005> sboot.bin <ID:0/005> NAND Write Start!! <ID:0/005> FAIL! <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) <ID:0/005> Removed!! Getting this kind of log from odin. note this is copy from another thread, otherwise same but buildnumber is different.. I can't even flash twrp/philz recovery. without getting some error, PIT related. I can't access recovery by anymeans as it wil boot up to that ''smart switch blablabla'' and pc will say it is not supported etc. I only can access download-mode. I have tried flash stock 5.1.1 PIT but it makes no difference. This is 32gb model. How deep i'm in brown?
Got this working! First i used odin 3.10.7 -> all fails Then tried 3.10.6 -> first try successfully only that hidden.img was failed but i extracted from firmware and and flashed it after that. Hope this helps someone.
if you had used smart switch on your pc, it was a lot easier............:good:
lambik333 said: if you had used smart switch on your pc, it was a lot easier............:good: Click to expand... Click to collapse Maybe if i would done it in first place, but i didnt. Used odin as it usually will do job. And this case smart switch didnt reconized phone at all. :good: