Hi,
I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it.
I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!!
Every time i want to flash with Odin it fails in the beginning of the process, see below:
Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason.
Any help what is going wrong or what i should try to do?
Thanks a lot far any help.
Dave
Even it is a generic question you might get an answer if you post it in the correct forum.
You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000.
davaze said:
Hi,
I'm trying to flash another firmware for my GIalaxy Note 10.1 N8000. I have read all tutorials etc. and prepared all according to it.
I was able to succesfully root to Clockwork Recovery so i though flashing another firmware to turn the Note into a European one instead of Chinese would be easy too. WRONG!!
Every time i want to flash with Odin it fails in the beginning of the process, see below:
Is there anyone who could comment me on what to do? I was able to recover from the failed flash attempt but i really want to flash another firmware from Europe for this Chinese version.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCLL3_N8000OXECLL1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried already two different Firmwares but both seem to fail at the same point. I only installed the USB drivers not KIES so i guess it is not the reason.
Any help what is going wrong or what i should try to do?
Thanks a lot far any help.
Dave
Click to expand...
Click to collapse
BeeGee_Tokyo said:
Even it is a generic question you might get an answer if you post it in the correct forum.
You are here in the Galaxy Tab 10.1 P7500/7501/7510/7511 forum! This is not for Galaxy Note 10.1 N8000.
Click to expand...
Click to collapse
Ooops, sorry my mistake! Moved it already.
Thanks.
Related
Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Reply
gadelhasss said:
Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Click to expand...
Click to collapse
Hello there!
I am knew to the android stuff, but I have flashed a new rom to my Galaxy Ace S5839i and now in the log screen appears S5830i. But it works so it's good for now.
Answering to your question I got that error too, I've downloaded a new Odin and a new rom to flash (like I said, know Appears S5830i on log screen) and it worked.
I know it's not much of an answer but I'm just trying to help, I wish you can sort it out.
All the best to you.
Hi to all! First of all, I am sorry if I put my problem in wrong forum. I'm new here...
I was trying to install Android Jelly Bean 4.2.2 firmware (I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5) on my Galaxy SII Plus via Odin_v3.09. Unfortunately, I put firmware file in field BL (in previous versions of Odin it was Bootloader) instead of AP. Odin finishes with status FAIL. Complete log is below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that, phone is stuck in Download mode. I can't restart it, turn it off or boot it in recovery mode. All I can do is to boot it in download mode again or I get message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" (which, by the way, doesn't work because it Kies cannot see the phone in this state).
Any help would be much appreciated! Thanks guys!
I really could use some help. I've been doing this for over five years and have never run into a problem like this. My dad was having some problems with his note 2 (Verizon) so he ask me to do a factory reset and either root it or put cyanogen on it. I tried using the new cyanogen installer but it said that SCH-I605 isn't supported. So I figured "whatever I'll just root it!" Well I went to root it using"NoYouVerizon-Note2" and it got halfway thru before it got stuck. I let it sit for few hours but nothing happened. So I unplug the phone and rebooted it. Then I got: "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". Now at this point I just want to get my dad's phone working again so I tried everything I can possibly think of. I downloaded Kies (which all the forums promise will fix it). But Kies says that it doesn't support the SCH-I605 Note 2. I tried it on two different computers (one Windows and one Mac) and I even tried older versions of Kies. Now forums I've read have said that if you cant use Kies then Odin will 100% fix it. I have Odin 3.09 and the bright side is that it sees the phone and I'm able to get the phone in download mode. But everything I try to flash fails. I tried flashing a recovery and it failed. So I tried flashing two different stock roms (from stockroms.net) and both failed. They'd get to the very end of flashing and fail. I've read every forum I can find and tried everything I can think of for the past two days. But no luck. I though I'd ask and see if anyone else had any ideas because my dad needs this phone for work. I know that since Odin can see it and I can get it in download mode there has to be some way to force feed the OS down its throat but so far, no luck. Any help is greatly appreciated. Thanks in advance.
Here is what ODIN 3.09 says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello I have a Galaxy s6 edge from videotron SM-G925W8 I've try to rooted it today , but now I'm cought in a bootloop , I've try to flash it back with the original Videotron firmware but Odin give me this error at the beggening
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know what should be my next step ?
imanu said:
Hello I have a Galaxy s6 edge from videotron SM-G925W8 I've try to rooted it today , but now I'm cought in a bootloop , I've try to flash it back with the original Videotron firmware but Odin give me this error at the beggening
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does anyone know what should be my next step ?
Click to expand...
Click to collapse
Did you try wiping the cache partition?
Snowby123 said:
Did you try wiping the cache partition?
Click to expand...
Click to collapse
yes and its not working
http://forum.xda-developers.com/galaxy-s6-edge/help/5-1-1-manual-update-stuck-g925f-t3173112
This thread describes a similar issue.
The user tried flashing the stock firmware through Odin; it bricked the phone.
If you read through it you will see how the issue was resolved.
Thanks , but its for G925F version ? what do I need to do since its not the same version?
Now that is another conundrum I wasn't prepared for. I know that half of the tutorial on that thread is compatible with your phone; half is exclusive to G925F.
---------- Post added 13th August 2015 at 12:06 AM ---------- Previous post was 12th August 2015 at 11:50 PM ----------
I found another thread that explains how to troubleshoot a failed Odin attempt.
It is written for the Galaxy S2, but sounds generalized for all Samsung Galaxies.
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If you have access to download mode, you're ok but in order to reduce to a minimum the things that might go wrong, you should:
1- Use odin 3.10.6
2- verify the integrity of the firmware downloaded on sammobile. It should be roughly 3,402,561 kb in size
3- make sure you have Samsung Android drivers installed
4- If all above fails, switch USB cable, and then USB port
If you still have an issue, try downloading the odin flashable TWRP and try to flash it, if it passes, try wiping everything on the phone in TWRP and try the process again
As a last resort, you can try to see if KIES emergency firmware installation will work. If after doing all this you're not back up and running, you're screwed but i doubt you will have failed all of the above.
at first.. you need a custom kernel to root 5.1.1 because of the new system write protection..the second i think you are on reactivation look..look in my twrp thread for more
You got error on sboot.bin due to your flashing bootloader version lower than your device bootloader try to get the latest firmware or flash a custom firmware
If you need further assistance contact me via pm
Sent from my SM-G925F using XDA Free mobile app
I tried newest uk beta (BTU) recently and i wasn't happy about the battery etc.
Flashed newest lollipop firmware for NEE csc. I have tried so many firmwares and no luck .. :crying:
Do i miss something big time? and i am 100% sure about that firmware is right.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Getting this kind of log from odin. note this is copy from another thread, otherwise same but buildnumber is different..
I can't even flash twrp/philz recovery. without getting some error, PIT related.
I can't access recovery by anymeans as it wil boot up to that ''smart switch blablabla'' and pc will say it is not supported etc.
I only can access download-mode.
I have tried flash stock 5.1.1 PIT but it makes no difference.
This is 32gb model. How deep i'm in brown?
Got this working!
First i used odin 3.10.7 -> all fails
Then tried 3.10.6 -> first try successfully only that hidden.img was failed but i extracted from firmware and and flashed it after that.
Hope this helps someone.
if you had used smart switch on your pc, it was a lot easier............:good:
lambik333 said:
if you had used smart switch on your pc, it was a lot easier............:good:
Click to expand...
Click to collapse
Maybe if i would done it in first place, but i didnt. Used odin as it usually will do job. And this case smart switch didnt reconized phone at all. :good: