Related
Hi all,
to my great frustration, I've discovered that my SGS2 line-out / headphones jack seems to have a slack joint, i.e. if you turn a connected plug around its long axis, a crackling sound is heared in the speakers and at some angular positions the stereo signal will be reduced to mono (i.e. one speaker gos silent). With one device (mobile outdoor speaker) I even had no sound at all at when inserting the plug with the wrong "orientation".
Did anybody experience the same problem or am I just out of luck here?
I am wondering whether sending back the device to the retailer (Amazon) or directly to Samsung (I'm situated in Germany) will yield the faster round-trip time, any experiences here?
Thanks!
PS: I know this may be a stupid question but can somebody PLEASE tell me how to search for multiple keywords with AND logic in this forum? Tried "+word +word" and "word AND word" (without the quotes) but nothing seems to work.
Are you using the headphones that came with it? My better half went through 4 sets of the stock samsung headphones with her original Galaxy S and all produced the same issue of losing one channel after a matter of days/weeks. having the jack inserted to about 2/3rds is a workaround but not ideal as you still lose some frequencies and it's insecure... They're just a bit pony.
No, I used different kind of headphones, including Sennheiser in-ear headphones and a standard male-male audio jack connected to some bigger hifi system. With some jacks I did not encounter the problem, but most of them lost some part of the signal with some orientations: I persume that the manufacturing tolerance of the jacks also plays a role...
Anyway, it's definitely not a problem of the jacks but of the device since I tried it with the SGS2 of a friend yesterday and it worked with the same jack that made problems with my device.
I will proceed sending my phone to Samsung for repair, I hope that won't take to long *sad looking*, I am so used to it now, it's card to survive to weeks without it.
I had the same problem, all I had to do was insert headphones cable "HARDER" into the audio jack until I herd a "click" sound.
I was way to over protective of this phone when i first had it, and wanted to handle too much with care, forced the dam cable in, and "click", sounded like it snapped into place, the audio worked correctly without cracking noise or without the need to wiggle to cable get clearer sound.
Perhaps your friends SGS2 is already used to headphone being inserted, but yours not. Just add a little pressure until you hear clip into place.
If this doesnt help, then repair or return.
Thanks for the hint, but unfortunately I had the jack inserted to the very end, so this was not the problem... sent in for repair now, let's see what happens.
I have a fix for you i think!!!!!!!!
ok . when i got my s2 like 4 days ago (at&t usa version) i noticed that when i plugged into my aux cable in my car that it was low sound cracking more volume on the left side , very annoying . NOW FOR A SIMPLE FIX FOR SOME TO TRY! PLUG IT IN ALL THE WAY! i noticed when plugging it in i wasnt fully plugging it in . it should go all the way down FULLY! the sound is perfect once this is done . I HOPE THIS HELPS YOU !!!!!! good luck
I'm not sure what's causing this, but I sometimes hook my Xperia Ray up to the line in of my car, and have noticed that when audio is stopped/muted, I get unpleasant clicking and whistling sounds (It's crystal clear when sound is actually playing)
It's almost as if something is shorting out the audio connection when it's not playing (there's a noticably loud click just before it starts playing again when I unpause) - is this just something the xperia does, or is there a fault somewhere, and if it's the former, is there anything I can mod in the software that'll fix it?
(It's not specific to my car, either - I've currently got my phone hooked up to the line in on my PC, and whilst the interference sound is different, it's still there)
This happens with loads of electronic gear.
It is particularly bad with smartphones but sony seems to be the loudest of all...i figure it is some sort of power saving turning the audio off, it is even noticeable with headphones on.
Your PC might not be helping...make sure it is all fully grounded in the case etc.
Full description of the problem:
I just got my EVO 4G LTE the other day, as a replacement to my original EVO 4G. However, I noticed when it was plugged into my car's AUX port, it puts out a high-pitch (like a teapot) noise. This noise happens as long as the headphone jack is powered up (something playing). Even if I turn the phone's volume down all the way, the high pitch is still heard. Otherwise, the audio from the phone can also be heard normally.
Things I've tried:
1. Different cables known to work. All act identically.
2. Headphones. They work fine.
3. Another car's AUX port. Worked fine.
4. Jiggling the jack on either end causes the pitch to change momentarily, but does not go away.
5. Slightly unplugging it from the car side (so one of the channels is not connected) makes it go away, leaving me to believe the high pitch noise is only coming from one channel (I believe the right channel, hard to tell).
Things I don't want to do:
1. Get a new car stereo.
2. Use a Bluetooth adapter. I already have the Stereoclip, and it doesn't do phone calls. Anything else sounds awful with music.
Does anyone have any solutions? I think its some sort of strange feedback/grounding issue, but I have no idea how I would fix this.
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
jasonkc25 said:
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
Click to expand...
Click to collapse
In my experience it has absolutely nothing to do with what app is being used, nor the EQ. It's nothing software as far as I can tell.
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
papadunit said:
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
Click to expand...
Click to collapse
The car charger makes no difference. I have tried using nothing but the audio cable in the phone and still had the static.
I was under the impression that a normal ground loop would require a charger, but...
Modplan: are you sure this will fix it if the noise occurs even without the charger plugged in? The noise is high-pitch, not really a hum, so I'm wary as to whether it will help here.
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
Click to expand...
Click to collapse
I wasn't able to replicate this.
I've had the same issue, but it's only when charging. I figured it had something to do with the aluminum body and, as papadunit said, a problem with grounding and your car's alternator and blah blah blah science.
modplan said:
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
Click to expand...
Click to collapse
I'm happy to report that this actually did solve the problem, amazingly. Thanks!
Actually had same issues this passed weekend but with my asus transformer. Was using it for navigation tethering from evo with both charging from my 400w inverter. Plugged transformer into aux and had same high pitching noise only when inverter was plugged in. Even tried different audio cables, same chit.
Sent from my EVO LTE
Headset Jack's other issues
I can confirm the same behavior with my EVO 4g LTE. My HTC Touch Pro 2 or Iphone 4s never had any of these issues with my vehicle's AUX jack. I also verified that if I turn the volume on the phone all the way down that the noise is audible on the vehicle's sound system. It also doesn't matter what player I use or if I add any equalizer settings to the audio. Finally, the noise is present whether the car is running or not.
Can you guys confirm: If you pause the audio on your player does the whine end about 4 seconds after and startup again if you press play? Or if you shut the player down does the noise go away shortly after?
I did some research and some said it has to do with the AUDIO DAC in the phone turning on and off as audio is played, paused, etc. If the output device has high sensitivity these sounds appear.
I had another issue with my Plantronics wired headset distoring when making phone calls. It did not present the whine but it distorted the callers voice as if the treble or bass was too high. I tried various audio settings but nothing changed. With other headsets the issue does not present itself. I think that the audio DAC is also sending higher/lower frequencies that are greater than some headsets can handle.
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
Click to expand...
Click to collapse
Mine changes pitch according to my cars rpms
Sent from my EVO
I am getting this with headphones, i have used multiple brands and its hit or miss but more hit than miss :laugh:, anyone getting it in there headphone?
I was getting this issue until I installed a custom ROM. Running MeanROM right now with no background noise. Seems counterintuitive to me...but whatever.
J
Sent from my EVO using xda app-developers app
dankorzon said:
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
Click to expand...
Click to collapse
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
SOLVED: I used a ground loop isolator
I posted earlier that I had the whining noise in my car even with the engine off. So it wasn't related to an alternator issue. I use a Blitzsafe (blitzsafe.com) device to add a line level input jack to my Honda Accord's stock radio interface. It works well with all my other devices except the Evo 4g LTE. This past weekend I did a little tinkering and noticed that if I pulled the RCA jack on one channel (left or right) every so slightly so the ground tabs weren't touching the noise disappeared. With only one channel connected the noise is not present. I'm not sure why the noise is present with both channels connected but it definitely pointed to a ground loop problem. I did some research in audio forums and some said that a wire could be jumpered so the RCA ground touches the receiver chassis and that would solve the problem. Unfortunately that did not do anything. I touched several different grounding points near the receiver but the sound was always present.
I went to Best Buy and purchased this: http://www.bestbuy.com/site/Fierce+...36.p?id=1218186610567&skuId=9855136&st=ground loop&cp=1&lp=1 It works great. For whatever reason the EVO 4g LTE's DAC must be sensitive or not have the right filter to block the ground signal. This explains why the Kensington product also works.
I also solved my headset issue. I can confirm that older corded Plantronic headsets will not work well with the EVO. The EVO distorts the speaker in the headset. I'm pretty sure it's because it sends lower bass frequencies than the speaker can handle. Only solution was to use a newer headset.
Thanks all for your help.
phiphiJR said:
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
Click to expand...
Click to collapse
That is what he is talking about, but that is NOT what the kennsington device is. Google "ground loop isolator" for info on what the kennsington is, it is NOT simply an aux cord with ferrite beads on it.
I've got the same problem in my car. This only happens when plugged into the charger. I'm going to try a ground loop isolation device which will arrive sometime next week.
I guess I don't understand why the phone would only do this when no music is playing though. It makes me think maybe a patch could solve the issue if HTC knew what the issue was.
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
geetee360 said:
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
Click to expand...
Click to collapse
I recall having an issue with my samsung headphones. They didn't work at one point, I rebooted and they were fine. The phone didn't even detect them for some reason. I've had no issues with aux in my car (aside from needing a new cable), however I thought it would be worth mentioning that my Note 2 had an issue with aux when it is on any AOSP ROMs. Selecting any app, even swiping the notification window down, sometimes even just leaving the music app and going back will stop the music from playing. The only solution for this was to go to the home screen unplug the aux start music playing and plug the cable back in and touch no other app. Again, it never did this with stock. I even went back to stock briefly because of this. AOSP seems to throw a fit with the aux cables.
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
infernosoft said:
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
Click to expand...
Click to collapse
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Click to expand...
Click to collapse
I just want my G3 to work as it should for such a simple function as the headphone jack/aux port.
I want to listen to music in my car without fannying around with different cables etc etc.
I had a Galaxy Note and S4, both played fine in the same car with the same cabling.
Shame on LG for releasing us a substandard product that cannot perform the most basic of tasks correctly.
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
R2DeeTard said:
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
Click to expand...
Click to collapse
My first feeling was confusion. I was also worried my headphones wouldn't work. But I was able to watch a beautiful high def video on my phone last night with my headphones on
Sent from my LGLS990
I just got this phone too, and although I love it, I was very sad to have this issue! I haven't had it on any other phone I have owned, so I certainly hope it is fixed in a future update. That and the video force close bug, but that is for another thread!
Guys, there is nothing wrong with the AUX port on your cars -- and they don't trigger via sound. They trigger via either conductive circuitry or via ohm load. Can you test if you are still seeing these problems when *not* charging? This issue is typically related to bad grounds. This happens to me at work when my phone is charging and I plug my headphones directly into my G3. If I pass the audio to my PC first (to the line-in,) and THEN to my headphones, the static is mostly gone.
So try unplugging the power source, and using different aux cables. Another factor is try plugging the power source into the same feed as the stereo. Sometimes this isn't that easy though.
What's happening on the back end with the sound changing between songs, etc, is that the audio codec, (the chipset,) is turning off to conserve battery. For me, when the chip turns on, it grounds the 3.5mm port just fine, and when it's off, AND I have power connected with headphones, I can get that whine -- depending on the scenario. So basically, this is by design -- an energy conservation tactic. I would be okay with them leaving the audio chip on the entire time headphones are connected.
Had this problem too and found that as long as I was charging the phone it would play like it should.
Yep, grounding issue. At work, routing the aux signal through my PC works just fine WHILE charging -- if I unplug, then I get all the machine noise.
In general, though, the headphone output is pretty crappy on this device. Even when it's "working great," there is still a faint amount of white noise that can be heard. Much higher than my HTC M7. The S5 had similar performance as the G3 though.
I just bought:
http://www.amazon.com/gp/product/B00ANDHBNS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And plugged it into:
http://www.amazon.com/gp/product/B00F474DVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So when I get in my car, it connects to the dongle for music and the car's blue tooth for phone.
It's not perfect, but gets the job done.
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
Click to expand...
Click to collapse
I just purchased this:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/ref=sr_1_1?ie=UTF8&qid=1406313911&sr=8-1&keywords=kensington+noise+reducing+car+audio+aux+cable
Working pretty well. Mainly solves the connectivity issues.
Still have the pop between tracks but it's much better.
Still have the "computer talk" garbage noise related to the display coming through the left channel.
I can live with this until LG or Android comes up with a fix.
aux problem
I guess I lucked out with my phone but then again maybe not. First off I will describe my setup, I have a 05 Subaru WRX with stock 6cd changer head unit ( no aux port ) I installed a Harmon Kardon Drive + Play iPod dock. This allows me to remote control my iPod and comes with a display that shows tracks and such. It works by FM transmitter but has an optional wire which I have that connects directly between the antenna and the stereo so you get little to no loss of signal. Between the AUX and my phone I connected a PAC SNI-1/3.5 3.5-mm Ground Loop Noise device. My previous phone was an LG Optimus G which I loved, when I hooked this phone up I could listen to Pandora/TuneinRadio through my car speakers and upon making/receiving a call I would hear the call through the car speakers and when I talked the phone mic. would pick up my voice. When I attempt this with the G3 I get no popping between tracks but the phone mutes the mic and when I say mute I don't mean the mute button comes on I mean the other person can't hear me. I found if I unplug and plug the phone in during the call eventually the mic works again, but to do this while driving defeats the purpose of hands free calling. Does anyone else have this problem? (or a solution).
Click to open expanded view
gorillaz1 said:
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
Click to expand...
Click to collapse
Works for me, thank you.
Mines does not work at all, with headphones or aux Jack, now I have to get Bluetooth headphones and bluetooth radio for car
Sent from my LGLS990 using XDA Free mobile app
Do we know if LG is working on this issue? Or if it is something that can even be fixed with an update? I'm getting tired of messing with the cable just to play music in my car, and I don't want to have to buy extra accessories to get the job done.
Sent from my LGLS990 using XDA Free mobile app
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Srambo217 said:
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Click to expand...
Click to collapse
They fixed it with ZV6. If you're already on ZV6 then I have no idea.
Sent from my LGLS990 using XDA Free mobile app
I've been using my Xperia Z5 for roughly 2 years without problems, but lately I've experienced a rather annoying issue regarding headphone use and the microphone (the one built into the phone, NOT one attached to a headphone):
After using the headphones to for example listen to music, the microphone will stop working, unless the headphones are plugged in. This is regardless of app (I've tested: sound recorder app, Google Assistant and phone call). It doesn't seem to be because the phone thinks the headphones are connected because: (I) it uses the built in microphone when the headphones are connected, (II) the speakers function as normal without headphones.
The only way to fix this, seems to be a reboot. After that the microphone works until headphones are used again.
Sony support suggested resetting the phone, however this didn't help. I've also tried searching both Google and XDA, but haven't found anyone else with the same problem.
The only thing that's changed since the issue started appearing, is that I janked on the connector on my headphone cable, which meant it got a bit loose. This in turn means it can disconnect if the connector or cable is moved in a certain way (though I haven't yet been able to figure out the exact movement or if it's the connector or the cable). I've already ordered a replacement cable.
I think the problem may be related to this disconnect that happens when the headphones are still plugged in. However, after this occurs, it doesn't matter what headphone/set is used, and plugging in a headphone WITH a microphone will function without issues (though disconnecting will still make the built in mic stop working).