Hello everyone
I already have a custom 4.1.1 rom on my s3. Is it possible to downgrade to another rom which is 4.0.4? And if possible how? May i directly flash the custom 4.0.4 to the 4.1.1?
Thanx in advance
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
you want downgrade to stock 1 or custom 1 ?
custom just use cwm, stock then odin
*both normally need to wipe after flash ICS
XeactorZ said:
you want downgrade to stock 1 or custom 1 ?
custom just use cwm, stock then odin
*both normally need to wipe after flash ICS
Click to expand...
Click to collapse
I want downgrade from custom 4.1.1 to custom 4.0.4 but not sure that flash from cwm works. May i flash directly 4.0.4 custom onto 4.1.1 custom?
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
pitbull112233 said:
Hello everyone
I already have a custom 4.1.1 rom on my s3. Is it possible to downgrade to another rom which is 4.0.4? And if possible how? May i directly flash the custom 4.0.4 to the 4.1.1?
Thanx in advance
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
I did it many times. switching between 4.0.4 to 4.1.1 back and forth no problem. Just do the normal process of wiping everything first and flashing the new ROM in CWM.
Kremata said:
I did it many times. switching between 4.0.4 to 4.1.1 back and forth no problem. Just do the normal process of wiping everything first and flashing the new ROM in CWM.
Click to expand...
Click to collapse
like flashing any rom right?
pitbull112233 said:
like flashing any rom right?
Click to expand...
Click to collapse
A roms a rom regardless if its ICS, JB or even a rom based on Gingerbread!! - As said above you flash the same way regardless.:good:
Just use CWM like previously started. Just do a full wipe of everything after you back up both internal and external SD cards, then flash.
Sent from my GT-I9300 using Tapatalk 2
downgrading
Can I used the data restored from a Jellybean back up to system,boot and cache restored with an ICS back up?
shaunyx said:
Can I used the data restored from a Jellybean back up to system,boot and cache restored with an ICS back up?
Click to expand...
Click to collapse
which data is it? apps data so far so good, i used titanium backup.
Related
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
jaazii said:
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
Click to expand...
Click to collapse
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
how to flash a stock 2.3.6??? i don't know. am new to it
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Download Odin (can be found in this forum)
Download your stock firmware 2.3.6 (I dont know about the CHN_CHN Version)
Put your phone into Download Mode. (Power Off, Hold volume down+home+power button)
Run Odin
Choose PDA file which is your stock firmware.
Flash
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Use search.. You will find lots of topics,, Anyways, following link will guide you :
http://forum.xda-developers.com/showthread.php?t=1110160
IMPORTANT : While choosing model from the dropdown on Checkfusdownloader, choose "GT-I9100G"... Do not choose "GT-I9100".
相信你是个中国人，要不然应该不能买到中国版的9100G。
用Odin刷5文件包吧…………
can any one please give me the link of android 2.3.6 rom for i9100G ???
jaazii said:
can any one please give me the link of android 2.3.6 rom for i9100G ???
Click to expand...
Click to collapse
try this..http://forum.xda-developers.com/showthread.php?t=1533091
..and try to find ur needs..
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
I tried this before when I first flashed to CM9, I get bootloops. Since then, I forever stick to ICS and never trying to convert back to GB although I wish to do so. I dare not and i'm lazy to deal with the bootloops.. I not sure why I get bootloops btw, some other ppl faced that as well. So I hope this brother able to convert back to GB successfully. Good luck.
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
GoZoU1 said:
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
Click to expand...
Click to collapse
So end up you success? Would you mind to share the old GB bootloader? Not the stock rom. Is the particular bootloader. Thanks!!
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
GoZoU1 said:
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
Click to expand...
Click to collapse
I can flash GB stock GDZKL3 after flashing this bootloader right? bootloader should flash before flashing rom, or after flashing the rom? Thanks.
I tried both options. Try flashing the bootloader at first but don't forget to uncheck "Auto-Reboot" in odin. After that you should be able to flash the stock GB ROM. Do you have a jig just in case of any problems? I remember I used my jig, but don't really know why.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A
Hi guys,
quick question - I'm currently running real ICS 5.2, want to upgrade to 6 - can I just boot into CWM and install the rom following the installation instructions or do I have to flash it back to stock rom first?
No need flash stock rom.
Sent from my Nokia 3310 using Tapatalk 2
Thanks
rashal said:
Hi guys,
quick question - I'm currently running real ICS 5.2, want to upgrade to 6 - can I just boot into CWM and install the rom following the installation instructions or do I have to flash it back to stock rom first?
Click to expand...
Click to collapse
Quick follow-up question: Updating PACman Rom, can I just update it without wiping anything? (which would be nice! )
tux-root said:
Quick follow-up question: Updating PACman Rom, can I just update it without wiping anything? (which would be nice! )
Click to expand...
Click to collapse
While you can boot and use the rom without wiping, some users found that a couple bugs appeared, and then after a factory reset they got it working. So I guess it won't hurt to try, right?
Updating from what to pacman? If it's another rom you need to do full wipe and format /system
No, just updating from pacman alpha 11 r2 to alpha 12. I think I will try later on after doing a backup and then see if everything works well.
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
mohitgalaxy3 said:
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
Click to expand...
Click to collapse
I changed my kernal via CWM to Jeboo.
SUPERSTARDJ01 said:
I changed my kernal via CWM to Jeboo.
Click to expand...
Click to collapse
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Can I flash in CWM Siyah kernal?
Mr.KiLLeR said:
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Do you have a link?
is this it? http://forum.xda-developers.com/showthread.php?t=1901191 or this http://www.galaxys2roms.com/details/?r=1194
Sorry to be a pain but do I use XXLPQ-OXX ICS 4.0.3 or XXLSJ-OXX (Jellybean leak) i'm on i9100xxlq6
Or you can try flashing to a stock rom first and then retry flashing the custom rom
wishmas7er said:
Or you can try flashing to a stock rom first and then retry flashing the custom rom
Click to expand...
Click to collapse
Tried flashing Philz kernel and it still failed to install the rom saying installation aborted.
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
wishmas7er said:
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
Click to expand...
Click to collapse
Oh ok, where can I download it?
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
wishmas7er said:
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
Click to expand...
Click to collapse
Do I need to do anything with my kernel?
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
theunderling said:
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
TBH we all have to find out the info at some point and this is my time to find out.
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
theunderling said:
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
I have a nand backup of which I've been using, I've also made backup using mybackup so all covered, I've flashed several roms previously with no issues.
SUPERSTARDJ01 said:
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
Click to expand...
Click to collapse
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
TheATHEiST said:
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
Click to expand...
Click to collapse
Tried that and it aborted.
SUPERSTARDJ01 said:
Tried that and it aborted.
Click to expand...
Click to collapse
What aborted? Flashing the newly downloaded rom or flashing Siyah via ODIN and then trying to flash rom again?
If you cant flash rom after you have Siyah kernel installed then as mentioned above you will need to try and restock via ODIN.
Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
xdadfm said:
Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
Click to expand...
Click to collapse
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Gil81 said:
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Click to expand...
Click to collapse
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
xdadfm said:
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Click to expand...
Click to collapse
Just as eushaun99 said...flash ICS with Odin..
eushaun99 said:
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Gil81 said:
Just as eushaun99 said...flash ICS with Odin..
Click to expand...
Click to collapse
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
xdadfm said:
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
Click to expand...
Click to collapse
No. Just flash it with Odin. Don't use that ROM. That is a modified version. Download the stock ROMs at www.sammobile.com.
Sent from my GT-P7500 using Tapatalk HD
Take a look at the One Stop FAQ and I've got links and stuff for flashing stock ICS
http://forum.xda-developers.com/showthread.php?t=2458846
Sent from my GT-P7510 using Tapatalk HD
I have upgraded my device from stock ICS to stock Jelly Bean, after that to Cyanogenmod 11 Nightly, and I want to try new roms and try the stock JB some more (I only tried it for half a day or so), so I'm wondering if the downgrading process is the same as the upgrading process ? Do I just have to transfer the rom+gapps to SD card, clear cash and flash or there's something to do before that ?
NOTE : I don't wanna use ODIN .... It doesn't get along with my device
zedex39zeo said:
I have upgraded my device from stock ICS to stock Jelly Bean, after that to Cyanogenmod 11 Nightly, and I want to try new roms and try the stock JB some more (I only tried it for half a day or so), so I'm wondering if the downgrading process is the same as the upgrading process ? Do I just have to transfer the rom+gapps to SD card, clear cash and flash or there's something to do before that ?
NOTE : I don't wanna use ODIN .... It doesn't get along with my device
Click to expand...
Click to collapse
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Jeetu said:
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
So for the stock jellybean all I need is Odin ? No Philz or anything else ?
zedex39zeo said:
So for the stock jellybean all I need is Odin ? No Philz or anything else ?
Click to expand...
Click to collapse
No,you don't need anything,as @Jeetu explained,if you want to go completely stock,Odin is the way to go.
Jeetu said:
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
TheImpossibleEnemy said:
No,you don't need anything,as @Jeetu explained,if you want to go completely stock,Odin is the way to go.
Click to expand...
Click to collapse
Thank you guys