Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
xdadfm said:
Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
Click to expand...
Click to collapse
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Gil81 said:
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Click to expand...
Click to collapse
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
xdadfm said:
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Click to expand...
Click to collapse
Just as eushaun99 said...flash ICS with Odin..
eushaun99 said:
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Gil81 said:
Just as eushaun99 said...flash ICS with Odin..
Click to expand...
Click to collapse
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
xdadfm said:
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
Click to expand...
Click to collapse
No. Just flash it with Odin. Don't use that ROM. That is a modified version. Download the stock ROMs at www.sammobile.com.
Sent from my GT-P7500 using Tapatalk HD
Take a look at the One Stop FAQ and I've got links and stuff for flashing stock ICS
http://forum.xda-developers.com/showthread.php?t=2458846
Sent from my GT-P7510 using Tapatalk HD
Related
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Gab! said:
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Click to expand...
Click to collapse
Cool as in not overheating ???
a wipe and flash of stock rom will remove custom rom .
Root and custom roms void warranty and have a slight risk of bricking the phone .
But are usually recoverable .
You need to read the faqs and guides and understand the CM9 instuctions first .
jje
Gab! said:
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Click to expand...
Click to collapse
to flash cynogen rom first u have 2 root ur phone please find the thread in original devlopment section regarding the same
u can reflash ur stock rom by dwnld the releavant .tar file adn flash the same thru odin
You can re-flash the stock rom, but just be sure to know which one is your stock rom. Go to settings, about phone and record the info there to be safe. Also back up your current rom using CWM.
There are always some risk in flashing a rom. Some people dont read instructions and cause problems on their phone, some people flash a rom not built for their phone (i9100 VS i9100G), etc.
Yeah i have rooted my device with cf-root. Thanks guys , i'll read some guides about cyanogenmod and flash it.
If your are currently on GB stock rom, Cyanogenmod developer recommends to install ICS bootloaded first,
You should be able to reflash your Stock ROM veriosn from ODIN, as well as custom roms from CWM...
What is bootload? o.o
My current firmware is ICS LP7
ZACQ8 said:
If your are currently on GB stock rom, Cyanogenmod developer recommends to install ICS bootloaded first,
You should be able to reflash your Stock ROM veriosn from ODIN, as well as custom roms from CWM...
Click to expand...
Click to collapse
No they say to have below some specific ics boot loader, no mention of upgrading your gb boot loader, unless they changed it.
Plus I yet to had any issues with the latest ics or gb bootloaders..
Sent from my GT-I9100 using Tapatalk 2
I think he meant boot loader.
But since you already have ICS, you won't need it. Just take the latest CM9 nightly (or ROM based off it), and flash (you'll have to wipe cache data and dalvik too eventually). Make sure you make a full backup of your current stock ROM through CWM as well.
Sent from my GT-I9100
Gab! said:
What is bootload? o.o
My current firmware is ICS LP7
Click to expand...
Click to collapse
I refer this guide actually : http://forum.xda-developers.com/showpost.php?p=20841817&postcount=1
I dont know its outdated,
as others are sharing their experiance that you could flash CM9 straight away from your CWM since you are already on LP7 with ICS Bootloader.....
I don't get it... What is a bootloader?. I mean when i flashed with ICS LP7 i didn't put a file on bootloader. I just loaded the PDA .tar file and flashed it..
Soo that means that i have to reflash the stock rom with bootloader?
Gab! said:
I don't get it... What is a bootloader?. I mean when i flashed with ICS LP7 i didn't put a file on bootloader. I just loaded the PDA .tar file and flashed it..
Soo that means that i have to reflash the stock rom with bootloader?
Click to expand...
Click to collapse
I dont know the ICS package you flashed had an ICS Bootloader already...
I just gave you the link for Original CM9 developers guide...
Just wait for others recommendation who have already flsahed CM9 from CWM....
Hmm thanks . But i have read in the guide that i can flash it with odin , do i still need the bootloader?
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
jaazii said:
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
Click to expand...
Click to collapse
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
how to flash a stock 2.3.6??? i don't know. am new to it
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Download Odin (can be found in this forum)
Download your stock firmware 2.3.6 (I dont know about the CHN_CHN Version)
Put your phone into Download Mode. (Power Off, Hold volume down+home+power button)
Run Odin
Choose PDA file which is your stock firmware.
Flash
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Use search.. You will find lots of topics,, Anyways, following link will guide you :
http://forum.xda-developers.com/showthread.php?t=1110160
IMPORTANT : While choosing model from the dropdown on Checkfusdownloader, choose "GT-I9100G"... Do not choose "GT-I9100".
相信你是个中国人，要不然应该不能买到中国版的9100G。
用Odin刷5文件包吧…………
can any one please give me the link of android 2.3.6 rom for i9100G ???
jaazii said:
can any one please give me the link of android 2.3.6 rom for i9100G ???
Click to expand...
Click to collapse
try this..http://forum.xda-developers.com/showthread.php?t=1533091
..and try to find ur needs..
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
I tried this before when I first flashed to CM9, I get bootloops. Since then, I forever stick to ICS and never trying to convert back to GB although I wish to do so. I dare not and i'm lazy to deal with the bootloops.. I not sure why I get bootloops btw, some other ppl faced that as well. So I hope this brother able to convert back to GB successfully. Good luck.
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
GoZoU1 said:
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
Click to expand...
Click to collapse
So end up you success? Would you mind to share the old GB bootloader? Not the stock rom. Is the particular bootloader. Thanks!!
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
GoZoU1 said:
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
Click to expand...
Click to collapse
I can flash GB stock GDZKL3 after flashing this bootloader right? bootloader should flash before flashing rom, or after flashing the rom? Thanks.
I tried both options. Try flashing the bootloader at first but don't forget to uncheck "Auto-Reboot" in odin. After that you should be able to flash the stock GB ROM. Do you have a jig just in case of any problems? I remember I used my jig, but don't really know why.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A
Another Beginner here
I was wondering suppose I rooted my S II and installed a Custom ROM And wiped the stock Samsung ROM that came with my phone.
Is it possible for me to return my phone to it's original ROM completely stock as I received it from the store ?
Thanks
P.S : Sorry if this question has already been asked.
Mysterious99 said:
Another Beginner here
I was wondering suppose I rooted my S II and installed a Custom ROM And wiped the stock Samsung ROM that came with my phone.
Is it possible for me to return my phone to it's original ROM completely stock as I received it from the store ?
Thanks
P.S : Sorry if this question has already been asked.
Click to expand...
Click to collapse
Yes when u install a Custom ROM ur stock (original ROM ), is automatically removed unless u dual boot it.. And u can go back to ur stock rom anytime
Sent from my GT-I9100 using Tapatalk 2
neerajganga said:
Yes when u install a Custom ROM ur stock (original ROM ), is automatically removed unless u dual boot it.. And u can go back to ur stock rom anytime
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
So Suppose in the future i just have a custom ROM.Then can I use any samsung based firmwares available in the forum to make my phone stock ?
Mysterious99 said:
So Suppose in the future i just have a custom ROM.Then can I use any samsung based firmwares available in the forum to make my phone stock ?
Click to expand...
Click to collapse
yes u can download ur stock rom and just flash through odin
Mysterious99 said:
So Suppose in the future i just have a custom ROM.Then can I use any samsung based firmwares available in the forum to make my phone stock ?
Click to expand...
Click to collapse
Yeah, just go to www.sammobile.com and download a stock firmware and flash through odin
Sent from my GT-I9100 using xda premium
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
I have upgraded my device from stock ICS to stock Jelly Bean, after that to Cyanogenmod 11 Nightly, and I want to try new roms and try the stock JB some more (I only tried it for half a day or so), so I'm wondering if the downgrading process is the same as the upgrading process ? Do I just have to transfer the rom+gapps to SD card, clear cash and flash or there's something to do before that ?
NOTE : I don't wanna use ODIN .... It doesn't get along with my device
zedex39zeo said:
I have upgraded my device from stock ICS to stock Jelly Bean, after that to Cyanogenmod 11 Nightly, and I want to try new roms and try the stock JB some more (I only tried it for half a day or so), so I'm wondering if the downgrading process is the same as the upgrading process ? Do I just have to transfer the rom+gapps to SD card, clear cash and flash or there's something to do before that ?
NOTE : I don't wanna use ODIN .... It doesn't get along with my device
Click to expand...
Click to collapse
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Jeetu said:
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
So for the stock jellybean all I need is Odin ? No Philz or anything else ?
zedex39zeo said:
So for the stock jellybean all I need is Odin ? No Philz or anything else ?
Click to expand...
Click to collapse
No,you don't need anything,as @Jeetu explained,if you want to go completely stock,Odin is the way to go.
Jeetu said:
Use any latest Philz Kernel flash it from recovery and then flash any custom jb rom.
If you want stock jb for that you have to use Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
TheImpossibleEnemy said:
No,you don't need anything,as @Jeetu explained,if you want to go completely stock,Odin is the way to go.
Click to expand...
Click to collapse
Thank you guys