I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Mine too!!!
Did you use the correct version of CF root??? I accidentally flashed the wrong one because it was right next to the correct one. The exact same thing happened to me!!!!!!!!!!!! I think the touch screen controller is dead. I am going to look at the Log to see what's happening. Does yours also take a while to boot or to load recovery?!!
CryptXus said:
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Click to expand...
Click to collapse
Hi
I am also in the same boat, any solution for this problem ?
Best regards
Sounds like u fried ur LCD touch. Hope u have insurance.
Sent from my SCH-I535 using xda app-developers app
Odp: Touchscreen not Working after rooting
I suppose wrong version used.
Sent from my washing machine...straight from the tumbler...
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My working solution
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Sup
lores79 said:
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Click to expand...
Click to collapse
So u must pay to buy a new touch module?
Dewasatya said:
So u must pay to buy a new touch module?
Click to expand...
Click to collapse
Pay yes unless its under warranty and root voids warranty .
OP self inflicted damage nothing to do but pay and learn .
jje
Root your Device
To Reset binary counter when touch is Dead Click here
Now Flash with a Stock Rom
And CLAIM Your Warranty
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
So I had previously rooted my SGSII, and decided to try installing CM7 on it. I used CWM Recovery and ran it off the SD card, and everything appeared to work fine. I think I had a bad/not fully functioning CWM or something, as it didn't list an option to backup anything (I'm guessing because I flashed the stock kernel after rooting?) Anyway, it will no longer boot. I can access download mode, but Odin fails everytime I try to flash anything back on there. When I try to boot my phone, I just get a "Firmware upgrade encountered an issue" error.
EDIT: I just tried again as I was writing this, after rebooting, reinstalling my drivers and rebooting my computer. I was able to get the Firmware to flash properly in Odin. Now I have my phone booting and getting stuck on the "Samsung Galaxy SII GT-I9100 splash screen... Doesn't seem to go any further than that though, unfortunately.
Any ideas what I can do? Is it possible that I need re-flash a bootloader or something ??
Any help would be supremely appreciated!
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
As long as you can get into download-mode, your phone isn't bricked.
If you switch from or to a TouchWiz-based ROM, you have to do a full-wipe in the recovery.
Sent from my GT-I9100 using XDA App
Go back to stock first via download mode via odin
Nah you're good. Similar thing happened to me at my first flashing attempt. Get your stock firmware from Intratech's thread, put the phone into download mode & flash the firmware via Odin.
Then maybe have another go at rooting the phone with the matching CFRoot kernel.
Porkchops said:
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
Click to expand...
Click to collapse
yes, if you can still go in download mode it's no so difficult..this "small brick" it's on of "Android things to do" once in your SGS2 life
Hi guys. I'm in a worst situation. As my phone after a failed ODIN downgrade from Android 2.3.6 to one stock kernel is completelly dead - it doesn't boot anymore - not even managed to put it back into download mode or revert to fact defaults (no keys, no lights not even battery charging displayed when pluged in) - tryed the USB jig also. Nothing worked.
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
This is the short story because I would bore you to discuss all the things I have been through - it was only my faoult out of stupidity
HELP!
I don't see why Samsung wouldn't fix it ? As to how much they'll charge you, I think you'll find that will vary from country to country (labour costs being variable, etc). No, I don't think you'll be able to have it repaired under warranty.
You might want to look at having it JTAG repaired by someone other than Samsung. This will possibly be cheaper than having Samsung repair it. Do a search on here/Google.
alexdonc said:
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
HELP!
Click to expand...
Click to collapse
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
I'm sorry it's going to cost Alex. A difficult thing to happen, I know
Here's a link for a JTAG repairer in the US who is also a member here, tho I see you've already found one. I'm sure doing it this way will be cheaper/probably faster than having Samsung do the repair as well.
alexdonc said:
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
Click to expand...
Click to collapse
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Yeah I've seen a report or two on here from people who have used his service & have been happy. Must admit I found his page when thought I'd bricked my phone after my first flash attempt messed up. Yeah you might be able to get it done cheaper somewhere local, and that will mean less time without the phone for you without the phone in mail from you to the US & back again.
Let us know how you get on, your experience will be a good guide for people in future who have the same problems as you.
No probs man, happy to give you the little help I did. You too Alex Hope you have a great year & you get your phone back & working soon
alexdonc said:
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Click to expand...
Click to collapse
Hello again. Solved right now. The service didn't charged me at all - I was kind of lucky after all. Unfortunately there are still some issues I have from the start. I'll keep on digging - software related.
I punched in this code: *#*#2663#*#* to update the firmware for my touch-screen and touch-key.
When I hit "Touch Key FW update" it updated really fast and everything was great!
When I hit "TSO FW update" is said "Now Updating... Warning! Do not turn off!" And it STAYED THERE FROZEN...
It said "Do not turn off!" So I left it until the battery died!
Then I plugged it in to charge it, and now the back button and menu button BOTH don't work at all! I tried two more times to "TSP FW Update" but it's totally permenantly frozen!
I tried flashing the stock firmware!
I can't get to the menu to do "factory reset!"
What do I do??
Have you tried using a USB jig and reloading firmware using Odin?
Sent from my GT-I9100 using Tapatalk
mrm1 said:
Have you tried using a USB jig and reloading firmware using Odin?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I have completely reloaded the firmware twice since then from a stock rom. I used Odin for it. My operating system works fine, generally, but the menu and back keys will not work.
But, are you saying that I can use Odin to specifically reload the TSP firmware? Because I haven't done that. If that's what you're saying, do you know where I can get TSP firmware?
But, are you saying that I can use Odin to specifically reload the TSP firmware? Because I haven't done that. If that's what you're saying, do you know where I can get TSP firmware?
Never heard of that and you dont need a uSB jig anyway as you are loading firmware ok .
I would download correct stock firmware .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Still problems use usb jig to set rom counter to zero if rooted or custom roms used ..
Return to service centre .
jje
Hi,
So this issue has been fixed??
Hi all. Well... It happened to me too. I followed an advice to remove 4.3 lag by updating this, and lost all touch.
The screen won't even turn on now, but I know the phone is powered up because when I plug in a usb cable I get the windows popup.
Wow this sucks so much and I'd like to ask for any advice if there's a fix for this. I'll try to check if I can enter recovery and reflash the rom, but I think all my buttons are dead.
---------- Post added at 06:38 PM ---------- Previous post was at 05:59 PM ----------
Update: after maybe an hour it came back to life. I had good battery so I guess it was downloading/updating stuff, during which I had no control of the phone.
As far as the experience enjoyment, I give it a 2/10, would not do again.
So it was in that "Now Updating... Warning! Do not turn off!" mode for a hour and after that all was normal again? Is the wakeup problem solved with that?
Solved - gt-i9000m *#2663# tsp fw update glitch
pattmayne said:
I punched in this code: *#*#2663#*#* to update the firmware for my touch-screen and touch-key.
When I hit "Touch Key FW update" it updated really fast and everything was great!
When I hit "TSO FW update" is said "Now Updating... Warning! Do not turn off!" And it STAYED THERE FROZEN...
It said "Do not turn off!" So I left it until the battery died!
Then I plugged it in to charge it, and now the back button and menu button BOTH don't work at all! I tried two more times to "TSP FW Update" but it's totally permenantly frozen!
I tried flashing the stock firmware!
I can't get to the menu to do "factory reset!"
What do I do??
Click to expand...
Click to collapse
Hi there pattmayne and particularly anyone still getting mileage from their GT-I9000M,
I had this issue with Galaxy S Vibrant (North America) - GT-I9000M (the M is significant). I thought I would explore the *#2663# option and hey, why not update everything while I am there. I lost the use of my Menu and Back soft buttons and no amount of flashing or factory resetting seemed to help.
I found a promising solution on an obscure board (to me : forums.whirlpool.net.au/archive/2181386) as follows :
- Run the TSP FW update,
- Although it may appear to be stuck, wait a good number of minutes to be sure it has done what it needs to do,
- Interrupt the « update » specifically by removing the battery,
- [wait a few seconds for memory to discharge],
- Insert the battery, start up again, and run the other update, TS FW,
- Voila !
In order to access the special code, I had to flash back to stock and for some reason, I decided to flash back to Froyo instead of Gingerbread. The result being that from 2.2-Froyo, the TSP FW update actually worked, so I did not have to bother with pulling the battery. I am very happy to have my phone back in one piece !
I much prefer Heimdall over Odin, however I did have to do some research to find a decent Heimdall tutorial.
You should be able to find the stock files for Froyo by searching for GT_I9000M_UGJK3_UGJK3_BMCJK3.
If you can't, ping me and I will get around to providing a full write-up on how to mod your GT-I9000M (with many thanks to those that have gone before me).
Hi, i have more or less the same problem with my Galaxy S4 GT I9505. After updating to lollipop (5.0.1) the back and menu buttons were not working anymore so i started searching for some solutions, and i saw the updating touchscreen firmware option and now the fit touch is not working anymore as the buttons. I read that making that i could have fried the LCD Touchscreen. I dont hope so, the LCD is new, I've re-flashed to 5.0.1 as a reinstall. And theres no solution. I need help, i cant afford another 65€ in other LCD
Luisao10 said:
Hi, i have more or less the same problem with my Galaxy S4 GT I9505. After updating to lollipop (5.0.1) the back and menu buttons were not working anymore so i started searching for some solutions, and i saw the updating touchscreen firmware option and now the fit touch is not working anymore as the buttons. I read that making that i could have fried the LCD Touchscreen. I dont hope so, the LCD is new, I've re-flashed to 5.0.1 as a reinstall. And theres no solution. I need help, i cant afford another 65€ in other LCD
Click to expand...
Click to collapse
There is a 26 page long thread over on the S4 forum about exactly this problem.
http://forum.xda-developers.com/showthread.php?t=3250132
It is doubtful that anybody on the S2 forum will be able to help you as anything that works for the S2 probably won't work on the S4......
Sorry fella, your best bet is to post in the thread I linked you to.....
Good luck.
http://i.imgur.com/rVnFwJM.jpg
I've installed a couple of different roms (custom en stock) and suddenly my touch screen isn't working anymore.
I'm sure it's not a physical problem (didn't drop), is it possible a rom messed up my touch screen drivers or something like that?
Download mode is working fine, installation of any rom without any problem but at the language selection screen my touch screen doesn't respond.
Does anyone got more options I can try before I send it to a Samsung Service Center.
Angelofmusic seems to have a similar problem, but no response yet. http://forum.xda-developers.com/showthread.php?t=1671969&page=119
beka66 said:
I've installed a couple of different roms (custom en stock) and suddenly my touch screen isn't working anymore.
I'm sure it's not a physical problem (didn't drop), is it possible a rom messed up my touch screen drivers or something like that?
Download mode is working fine, installation of any rom without any problem but at the language selection screen my touch screen doesn't respond.
Does anyone got more options I can try before I send it to a Samsung Service Center.
Angelofmusic seems to have a similar problem, but no response yet. http://forum.xda-developers.com/showthread.php?t=1671969&page=119
Click to expand...
Click to collapse
Thread moved to proper forum.
Nobody got any clue how to fix this?
beka66 said:
Nobody got any clue how to fix this?
Click to expand...
Click to collapse
right, to start off remove your sim/sd card (if you have one)
next format the internel sd card, or dlete EVERYTHING on it
wipe the phone in recovery
download the latest Samsung firmware and flash that in odin (instructions on the thread) then after you see the samsung logo pop back up enter stock recovery mode. then wipe everything there. boot up and touch screen SHOULD work. If it doesn't send it into Samsung. Little more i can do.... good luck
I have had the exact same thing happen to me - and have found one other user with the same issue as well - seems like too much of a coincidence that it happened after a rom upgrade for it to be hardware - even more of a coincidence for the same thing to happen to three different people
part of me refuses to accept that its a hardware issue - I am trying all sorts of rom and kernel (stock and modded ) solutions to see if that resolves it
I tried the same things, tried a lot of roms but all the same the touch screen didn't work.
On another forum a guy advised to install the CWM touch and see if that works, but after the install I couldn't got to the recovery mode.
So I couldn't test it.
An other thing Im going to test is attaching a usb OTG cable and attach a mouse. Im curious if the mouse will work and if it's possible to recalibrate the touch screen......
If you have a solution I would be very happy.
thejoose said:
I have had the exact same thing happen to me - and have found one other user with the same issue as well - seems like too much of a coincidence that it happened after a rom upgrade for it to be hardware - even more of a coincidence for the same thing to happen to three different people
part of me refuses to accept that its a hardware issue - I am trying all sorts of rom and kernel (stock and modded ) solutions to see if that resolves it
Click to expand...
Click to collapse
I tried a few roms that use Aroma to install and the touchscreen doesn't work in that either
I have also just noticed that when ever i try to install any CWM touch version - i am unable to boot to recovery - regular cwm recovery and the stock recovery will work
is that linked maybe?
I've attached a mouse with the OTG cable but still wasn't able to reconfigure/calibrate the touch screen.
So installed triangleaway, back to the original rom and to the repair center
How did you install Triangle away without being able to get into a rom?
at the moment my rom count is 27 and i didnt realise i could get triangle away on there without a rom to load it into - is there a .zip update that will do it from the stock recovery?
Hi guys. I have seen and read through plenty of the same problems regarding the bootloop issue on the forum. I seem to be stuck somewhere different so I post this question. I hope someone can help.
I have a standard S3 I-9305 LTE in South Africa. Not rooted before or any mods. But somehow it started bootlooping a couple of weeks ago. I read and implemented the Recovery Mode- Cleared the cache and then rebooted, and it worked, plenty of times.
But now it has gone into a solid bootloop and i cannot access recovery mode. So read up about Download mode and installed Odin, Kies and the Cf Root file on my PC.
Now when I enter Download mode on the phone, and continue( press Volume Up) after the warning, the device restarts again. This I have done a hundred times and each time removing battery and waiting a couple of minutes. So essentially I cannot get Download mode to function but I do have access to it.
So this I know, this is a software , possible ROM problem, NOT hardware as the device worked perfectly after bootloop issue started.
I did the latest Firmware Upgrade to Android 4.2( i think, i r noob in this) yesterday. This was done on the phone itself under About-check-firmware. The Phone worked fine afterwards but then went into this never ending tormenting bootloop without yielding.
I live far from a proper service centre and I need my phone for work, thus very urgent.
I also have checked if the power button is stuck but it is not.
I am prepared to root the device and install any other ROM, Flash anything that can get me back on.
Any advice please?
Thanks in advance
Report your own post and ask a moderator to move it to the i9305 q&a forum.
Sounds like the emmc chip is corrupt or damaged, you may require a new motherboard.
Try plugging your phone into pc before you access download mode, remove the battery before you press volume up.
Sent from my GT-I9300 using Tapatalk
Caution and thanks
boomboomer said:
Report your own post and ask a moderator to move it to the i9305 q&a forum.
Sounds like the emmc chip is corrupt or damaged, you may require a new motherboard.
Try plugging your phone into pc before you access download mode, remove the battery before you press volume up.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Hi Boom,
I have seen you have diligently answered many queries, please to be cautious saying it is a motherboard or hardware issue, it makes peoples heart sink before trying other avenues first. But don't get me wrong, the fact that you took the time to answer me makes you my hero. :good: And thanks.
I will try the other option you gave as I know the phone is fine the answer is just a few tries away.