Related
hi all, i would like to ask you for a help with my vibrant. I just purchased it and successfully made the root and unlock. I managed to do both even tho my hardware button keys does not support the recovery mode. Any holding of the buttons will not allow the phone to go to recovery mode, this is not working even with an odin. After i did the root and unlock i downloaded the rom manager, created a clockwork image and back up i tried to make the partition of my 16gb SD card using the rom manager. After this my phone restarted but after t mobile logo and galaxy s logo the phone screen stays black. Tried all thee methods to go into the recovery mode but was not able to do it. i searched this forum also but was not able to find similar case to this one. i would be very thankful for any advice.
You'll have to get T-Mo to exchange it.
http://forum.xda-developers.com/showpost.php?p=8149673&postcount=15
thanks to this instructions i was able to use odin but this did not change the satus of my phone?????
unfortunately cant i did not buy it in the store
NEVER use rom manager to partition your SD card. Try the steps in this thread
thank you, trying to do it now
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
thank you, unfotunatelly i am stuck with HW keys problem againm!!!!
i follow the steps from the post 4 from @Alkaloid and now from dead i am at froyo and will hang here for a while cause at least for a week dont want to flash nothing. Boy what a day, 12 hours fixing this samsung!!!
Ivuso, how did you get in to download mode? I tried everything from every single thread here that mentions how to get in to download mode..
Odin is the way to go..it saved me too
DJ! said:
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
Click to expand...
Click to collapse
how did u manage to do that
You do not have to exchange it the same thing happened to me. You just need to use odin to flash the stock rom onto it. Its really easy. Youtube it
Sent from my SGH-T959 using XDA App
if you have the hardware keys lock the only way to get to download modwe is through odin. For me worked this.
start odin, fil pit and pda
remove battery
usb in the computer
hold volume buttons
put battery in - phone is showing just the battery charging status
disconnect usb and than fast connect back
now you are able to flash froyo from the the 4th post in this thread, once finished you will be in download mode but need to reboot with adb cause hardwate "enter" button will not work
GOODLUCK
Hi there, i finally got round to trying to root my galaxy s2 having put it off for a while due to the fear of it all! I only really wanted to root it to move the games over to my sd card since they were taking up all the room on my internal memory!
Anyway now that i have done it, i have really messed up my fone. My fone will not boot anymore, it will only go into download mode. It won't go in recovery or boot at all. It goes to the galaxy s2 logo and displays a yellow sign at the bottom of the screen. I have tried numerous tutorials online to try and fix this problem. I have tried 'Phistachio's guide on this forum and i still couldn't get it to work. It just comes up 'Fail' when i try to flash everything. It flashes the kernal fine, and it also flashes the pit file fine, but the rest it just fails on.
I really need my phone up and running again through any means! If anyone has the time to help me, that would be fantastic! I just need it fixed, and it feels like i am running out of ideas on what to do next.
Im sure i was on ice cream sandwich when i tried to flash the device so i followed this tutorial on galaxys2root....com (i can't post the link)
But it after this, it never booted.
Please help!
Thanks
coldjim said:
Hi there, i finally got round to trying to root my galaxy s2 having put it off for a while due to the fear of it all! I only really wanted to root it to move the games over to my sd card since they were taking up all the room on my internal memory!
Anyway now that i have done it, i have really messed up my fone. My fone will not boot anymore, it will only go into download mode. It won't go in recovery or boot at all. It goes to the galaxy s2 logo and displays a yellow sign at the bottom of the screen. I have tried numerous tutorials online to try and fix this problem. I have tried 'Phistachio's guide on this forum and i still couldn't get it to work. It just comes up 'Fail' when i try to flash everything. It flashes the kernal fine, and it also flashes the pit file fine, but the rest it just fails on.
I really need my phone up and running again through any means! If anyone has the time to help me, that would be fantastic! I just need it fixed, and it feels like i am running out of ideas on what to do next.
Im sure i was on ice cream sandwich when i tried to flash the device so i followed this tutorial on galaxys2root....com (i can't post the link)
But it after this, it never booted.
Please help!
Thanks
Click to expand...
Click to collapse
http://galaxys2root.com/ only links to the whole website, post the link to the tutorial you followed (add spaces).
What's your phone Model no?
were you on Gingerbread or ICS before trying to root?
If you can get in download mode, then just flash a stock rom
coldjim said:
Hi there, i finally got round to trying to root my galaxy s2 having put it off for a while due to the fear of it all! I only really wanted to root it to move the games over to my sd card since they were taking up all the room on my internal memory!
Anyway now that i have done it, i have really messed up my fone. My fone will not boot anymore, it will only go into download mode. It won't go in recovery or boot at all. It goes to the galaxy s2 logo and displays a yellow sign at the bottom of the screen. I have tried numerous tutorials online to try and fix this problem. I have tried 'Phistachio's guide on this forum and i still couldn't get it to work. It just comes up 'Fail' when i try to flash everything. It flashes the kernal fine, and it also flashes the pit file fine, but the rest it just fails on.
I really need my phone up and running again through any means! If anyone has the time to help me, that would be fantastic! I just need it fixed, and it feels like i am running out of ideas on what to do next.
Im sure i was on ice cream sandwich when i tried to flash the device so i followed this tutorial on galaxys2root....com (i can't post the link)
But it after this, it never booted.
Please help!
Thanks
Click to expand...
Click to collapse
Hi!
I can see that you are stuck on bootloop. There are a lot of options to get you started on fixing this.
If you can go to download mode, you can just flash a stock rom/firmware via odin..
If you can't go to download mode, you use a usb jig to get you to download mode (if you don't have a usb jig, you can borrow one near you.. the link is on my signature).. and once you get to download mode, you can flash a stock firmware/ rom..
you can get/ download stock firmwares on sammobile.com but you have to have an account there. don't worry it's free
I hope this helped
Cheers!
usb jig n flashing stock rom over pc odin the best way
coldjim said:
Hi there, i finally got round to trying to root my galaxy s2 having put it off for a while due to the fear of it all! I only really wanted to root it to move the games over to my sd card since they were taking up all the room on my internal memory!
Anyway now that i have done it, i have really messed up my fone. My fone will not boot anymore, it will only go into download mode. It won't go in recovery or boot at all. It goes to the galaxy s2 logo and displays a yellow sign at the bottom of the screen. I have tried numerous tutorials online to try and fix this problem. I have tried 'Phistachio's guide on this forum and i still couldn't get it to work. It just comes up 'Fail' when i try to flash everything. It flashes the kernal fine, and it also flashes the pit file fine, but the rest it just fails on.
I really need my phone up and running again through any means! If anyone has the time to help me, that would be fantastic! I just need it fixed, and it feels like i am running out of ideas on what to do next.
Im sure i was on ice cream sandwich when i tried to flash the device so i followed this tutorial on galaxys2root....com (i can't post the link)
But it after this, it never booted.
Please help!
Thanks
Click to expand...
Click to collapse
Hi.
Firstly take out the fear in you n then try out anything with yr phone for wat u need.
Now find a jig which will reset yr binary count to Zero.
Find your countries latest stock rom on xda or sammobile.
Odin v 1.85
Stock rom tar file (which u get after extracting downloaded rom )
Install samsung mobile drivers on yr pc.
Put yr phone to download mode manually (vol down +centre+power)
Then open odin n don touch anything other than pda.
In pda select the md5sum tar file.
Then connect yr phone with usb cable to odin n after u find an yellow vom port u ve to start n wait for stock rom to get
Flashed n with fear don remove cable in the midfle of flash n once done it will restart n work the way it was before.
guys im managed to do it!! I was up all last night trying to figure it out and ive done it! WOOP! My fone is now rooted but the only downside is that i lost all my contacts, apps and messages in the process Fresh start it seems then..
but thanks for all ur help!!
share it! !!
coldjim said:
guys im managed to do it!! I was up all last night trying to figure it out and ive done it! WOOP! My fone is now rooted but the only downside is that i lost all my contacts, apps and messages in the process Fresh start it seems then..
but thanks for all ur help!!
Click to expand...
Click to collapse
Hey friend.
Congrats! !!
Kindly spare sometime on sharing what you did to get yr phone back to work.
It might help some1 who faces same situation lik you came across.
Hello good people from xdadevelopers,
PREREQUISITES:
I come to you as a noob seaking some answers. Somewhere in November I bought a Samsung Galaxy S2 from Orange that came with the Orange Branded software. Because the phone kept switching off (the Sleep of death bug, i think) I sent it in for service and it came back with the same problem.
Seeing that Samsung Keys does not have an option to restore the phone (as I could do from iTunes for my iPhone) I reflashed the phone with 4.0.4 Android XXLQ5 osing ODIN. The phone works better now, still get the SOD, but not as frequently.
The problem that I am facing now is that I cannot use keys anymore to update and since the 4.1.2 Update should start shortly I don't know what I can do to pass to the new version.
QUESTIONS:
1. How can I do a software restore from keys to the new Android version once an update is available?
2. Are there any precautions that I have to keep in mind since I have the LLQ5 version installed (I used the emmc checker from the store and my chip is "sane")?
3. If I flash the Orange version back from Sammobile, will I be able to use Keys again?
I have also added a screenshot of how the phone battery stats looked after recovering from a sleep of death issue just in case you know if it's another problem and I missed the diagnostic.
Link for screenshot: http://dl.xda-developers.com/attach.../3/5/4/7/5/Screenshot_2012-12-03-16-46-42.jpg
Thank you for your time,
Andrei Doru Tudose
download your branded stock firmware from sammobile...:good: when 4.1.2 rolls out:fingers-crossed:, flash downloaded stock firmware via odin n then connect to kies n you will be able to get official update...:laugh:
Peaceful Droid said:
download your branded stock firmware from sammobile...:good: when 4.1.2 rolls out:fingers-crossed:, flash downloaded stock firmware via odin n then connect to kies n you will be able to get official update...:laugh:
Click to expand...
Click to collapse
Hi Peaceful Droid,
Thank you for your answer. Could it really be that simple as flashing the official ROM and then the phone is yet again accessible through Keys?
If this is the only thing I have to do than thank you :laugh:
This phone has been a pest since I bought it. I don't know why Keys doesn't let you to simply make a restore to get a stock phone as you could in iTunes. There it was that easy, just connect the phone and click restore then set-up as new iPhone and problem solved. Back to stock in 30 minutes.
Thank you,
Andrei Doru Tudose
Yes. remember always read the instructions carefully and do it step by step and you will never face any issues...
and my dear friend if samsung also do as apple did then apple will knock doors of courts again...
nvingme bordars
Peaceful Droid said:
Yes. remember always read the instructions carefully and do it step by step and you will never face any issues...
and my dear friend if samsung also do as apple did then apple will knock doors of courts again...
Click to expand...
Click to collapse
Thank you once again, I just hope this solves the sleep of death issues this phone has All my faith in the JB update.
I still have 22 months of warranty left and if the phone keeps turning off I will send it back to them
Thank you,
Andrei - Doru Tudose
Uploading....Coming soon
Hello everyone this is the official odin package for the galaxy mega ATT version. With this you can get your phone back working if you get the "This phone is not running authorized software crap. " etc . Also hope it encourages more people to find a root method without the fear of having a brick. As many of you know this package was nowhere to be found so I had to bribe a Samsung employee to give it to me which means it wasn't free for me but I'm sharing it with you guys so if you send me a beer my way i'll be happy not mandatory.
This package is in multiple parts:
I527UCUBNE7
AP: Must be flashed under PDA in Odin. This is the biggest file and contains your system,recovery and kernel partition Download
BL: This is the bootloader. If you already took the update ignore this but if you want to upgrade your phone you must flash this Download
CP: This is the modem and other network related partitions. You must flash this under Phone in odin Download
CSC: This contains carrier related settings for our firmare. Flash this under CSC in odin. Download
Highly Recommended to perform a factory reset after the flashing is completed. Let me know your results
Omg !! Super thanks bro !!!! =))))))))
So good !!!!! update successfully
Thanks again !!!
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
latinohot said:
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
Click to expand...
Click to collapse
Garack has been working on it and has actually posted a file to flash in Odin I beleive. He say that if it boots up, then root should be obtainable.
Not sure anyone has tried it yet.
It is in the "root bounty for 4.4.2 update" thread
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
im getting error last stage on system upload any advised ?
@ Sunderwear Thank you very much for the great post and instructions. I'm currently testing it out with my i527 AT&T with ODIN 3.09... will post results in a few minutes. My phone was stuck in reboot after official 4.4.2 AT&T update left it in loop mode... give me a few minuytes and I'll post my results!
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Yeah, the screen was replaced a while ago. The phone went bad once it installed the 4.4.2 official update. I will try use some other usb cable. I have plenty of microusb wires. Do you think the screen has something to do with it?
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
I haven't tried this yet...but I will back up tomorrow and report back how it goes with my unit...I still have my factory with no knox bootloader so far..and was debating if I want to even try really...
alex852 said:
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
Click to expand...
Click to collapse
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Sunderwear said:
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Click to expand...
Click to collapse
Yes Sunderwear that will happen because there is 3rd parties making aftermarket screens and people were buying them as replacements...If you don't have the OEM screen the driver in the firmware won't work and it will hang...I run in to something like this on a Galaxy S4 I repaired...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
I ran it as instructed and it worked flawlessly. tHANKS [email protected]
Help!
Every time I try to use the PDA and PHONE files, it says they have an invalid md5 hash. I've tried re-downloading them, but to no avail. Could anyone help with this?
thanks.it works fine...
I did all the stepa and finally I have K.K. Just wanted to say- thank you.
USMAN_ZEESHAN said:
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
Click to expand...
Click to collapse
Sorry for the long delay. I think I found the full issue with the Samsung Glaxy Mega boot loop on 4.4.2
My phone is till not working. We own four 6.3 Megas (1 my wife, 1 daughter, 1 son, and mine).
Officially I have 2 that are not working properly and stuck on boot loop. My wife and daughter are working properly on 4.4.2 my son's now and mine are stuck in boot loop. Wife's phone has original screen and it's working properly, my daughter has a replacement screen I bought on ebay for about $160.00 on January. My son's I've replaced the screens about 3-5 times already (a ton of money wasted), and mine, recently I did replaced it on May (before the 4.4.2 update on June). Here goes the issue:
My son's phone updated today about 2 hours ago while we were visiting the AT&T store for U-Verse Quote. Did not know it updated until we got home... Sons' phone is stuck in boot loop also now!!!!!!!!!!!! What I did was I took my daughters phone apart (with expensive replacement screen and currently running 4.4.2), and installed the screen on my sons and then mine, and each phone would work flawlessly with that screen, so I took the current replacement screens I had from my phone and my son to install them on my daughter's and each one would go into boot loop.
After that, I re installed the good screen on my daughters back, and daughters work properly again. I guess the generic OEM screens from eBay I've been buying for $50 bucks are not compatible with 4.4.2 Kitkat, they are only compatible with 4.2.2 Jelly bean.
Anyone knows where I can buy original screens? I've contacted several sellers on eBay to see if the screens work on 4.4.2 because I don't want to spend more money on screens. I just got 1 from China 2 days ago, and that one also gets stuck in boot loop... so frustrated with screens. All my OT from work goes to pay for these issues... Help anyone? Anyone sells working 4.4.2 compatible screens?
Also, I will buy a broken ORIGINAL screens from ebay (like $7-$10) to test it out and verify. I will post results. Hope this experiment (and my sadness) will help you guys out if stuck in boot loop.
P.S. Oh yeah, I did do both phones on PDA, then all BL,PDA, etc... and I still get boot looped. I have to say THANK YOU to the original autheor because it does work! It's just my screens that doesn't work!!!!! HELP GUYS!!!!!:crying:
Is there a certian order u need to flash these in?
Any short tutorials..
Ive flashed odin pda only b4..
Have to factory reset first?
Thanks guys.
Hi there,
After two days of continuous efforts to resolve the issue and reading hundreds of articles and forum threads, I have tried everything to fix the problem to no avail.
I have just recently started using Android (Samsung Galaxy S3 I900T) It was purchased in New Zealand. When my iPhone died, I decided to try Android as I was getting a little sick of iOS. Anyway, since I am a total noob, I followed a great guide here on XDA forums to install a custom ROM. I installed Paranoid following step by step instructions and LOVED it. Everything was working well and I was happy with the "lollipop" as Jellybean was laggy and slow.
I then tried a couple of apps for various tasks that asked me to 'root' the device. I did not really care for it until Cleanmaster asked me to. So I installed an app (can't even remember the name) and it rebooted the phone. Now it is just stuck at "Samsung Galaxy SIII" white logo.
I tried to go into recovery mode by pressing Volume up + Home button + power and it simply won't work. Pressing volume down button however does bring the "Download mode".
According to many articles I have read, it seems my phone is soft bricked. Is there anyone who could help me to fix my phone? I am desperate and would highly appreciate any assistance! Please be kind as I am new to Android OS and pretty much a noob.
I will be checking for replies every 30 minutes in anticipation there might be someone knowledgable here to help me out.
Please feel free to ask any questions you may need to assist me and I will try my best to answer them as technically as possible.
Thank you in advance! :angel:
PS- I beg your pardon if I posted this in the wrong section or if I have not given enough information.
ZLestat86 said:
Hi there,
After two days of continuous efforts to resolve the issue and reading hundreds of articles and forum threads, I have tried everything to fix the problem to no avail.
I have just recently started using Android (Samsung Galaxy S3 I900T) It was purchased in New Zealand. When my iPhone died, I decided to try Android as I was getting a little sick of iOS. Anyway, since I am a total noob, I followed a great guide here on XDA forums to install a custom ROM. I installed Paranoid following step by step instructions and LOVED it. Everything was working well and I was happy with the "lollipop" as Jellybean was laggy and slow.
I then tried a couple of apps for various tasks that asked me to 'root' the device. I did not really care for it until Cleanmaster asked me to. So I installed an app (can't even remember the name) and it rebooted the phone. Now it is just stuck at "Samsung Galaxy SIII" white logo.
I tried to go into recovery mode by pressing Volume up + Home button + power and it simply won't work. Pressing volume down button however does bring the "Download mode".
According to many articles I have read, it seems my phone is soft bricked. Is there anyone who could help me to fix my phone? I am desperate and would highly appreciate any assistance! Please be kind as I am new to Android OS and pretty much a noob.
I will be checking for replies every 30 minutes in anticipation there might be someone knowledgable here to help me out.
Please feel free to ask any questions you may need to assist me and I will try my best to answer them as technically as possible.
Thank you in advance! :angel:
PS- I beg your pardon if I posted this in the wrong section or if I have not given enough information.
Click to expand...
Click to collapse
Flasback to stock with Odin using firmware from Sammobile here >> http://www.sammobile.com/firmwares/database/GT-I9300T/ << don't forget that if you get a bootloop after flashing to do a factory reset.
tallman43 said:
Flasback to stock with Odin using firmware from Sammobile here >> Link hidden << don't forget that if you get a bootloop after flashing to do a factory reset.
Click to expand...
Click to collapse
Hi Tallman, thank you for your response. I am currently downloading the recommended firmware (916 MB, 2 days left till completion )
While its being downloaded, I have another question: whenever I connect my phone in "Downloading mode" by pressing volume down + home + power, Odin does not even pickup on the device. It is almost like nothing is even connected. I have installed the latest Samsung driver on my PC.
Would the flashing work if Odin is not even recognizing or acknowledging my device?
Thanks
ZLestat86 said:
Hi Tallman, thank you for your response. I am currently downloading the recommended firmware (916 MB, 2 days left till completion )
While its being downloaded, I have another question: whenever I connect my phone in "Downloading mode" by pressing volume down + home + power, Odin does not even pickup on the device. It is almost like nothing is even connected. I have installed the latest Samsung driver on my PC.
Would the flashing work if Odin is not even recognizing or acknowledging my device?
Thanks
Click to expand...
Click to collapse
You have to wait while your stock rom is checked and in the pda box then it should recognize it look here for guides >> http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969 << Also I noticed in your first post you put Galaxy S3 I900T did you miss spell S3 I900 because it should be S3 I9300
tallman43 said:
You have to wait while your stock rom is checked and in the pda box then it should recognize it look here for guides >> << Also I noticed in your first post you put Galaxy S3 I900T did you miss spell S3 I900 because it should be S3 I9300
Click to expand...
Click to collapse
Indeed, that was my bad. That is why I am so glad I have finally found someone like an expert yourself. The model is GT-I9300T. I missed the 3 in the original post. I believe (I might be wrong) the 'T' is for all the phone sets issued by Telecom (now rebranded as Spark) in Australia and New Zealand.
I have managed to download around 16 MBs lol.
Once again, appreciated your help dude :good:
My suggestion is connect your phone and keep it with Samsung kies for recovery. It would bring your phone back to purchased state.
Sent from my LG-D855 using XDA Free mobile app
ganesh81289 said:
My suggestion is connect your phone and keep it with Samsung kies for recovery. It would bring your phone back to purchased state.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the response.
Kies does not detect any phone. Could it be due to the fact that the bootscreen is stuck in loop? I was loving my Custom paranoid ROM until some motherlicking app forced booted the phone in order to "root it".
I do not want to switch back to iOS and thats why I am so desperate to get my S3 fixed. I have put my SIM in my iPhone until Galaxy gets fixed.
Its strange how much I supported everything Apple back in the and how I much I dislike it now. It's like I have divorced Apple and now my Android mistress is acting up too. :silly:
Odin is too sensitive i guess i too have a s3 GT-I9300 and i have noticed that all usb cords dont work on odin. Try to change the cord it works. The shorter the better. It will surely detect just change the usb cord or try to connect to another usb port.
Sent from my HTC One_M8 using XDA Free mobile app