Related
Hi all. i'm having trouble finding a specific thread to help me solve my problem. (I'm not too good with rooting, and should have not messed with it in the first place!)
Anyways let's get to my problems:
So I needed to take my phone to the Verizon Store, and without thinking went straight to the Factory Reset thing. Now everytime I try booting up my phone it gets stuck on the custom bootup screen and freezes during part of the animation and just stays there.
I have read things that say try going into hboot and doing recovery, but all's it asks me to do is update, then has me reboot. It doesn't update anything as it still does the same exact thing.
My question is, can someone please help guide me through the process of returning my Thunderbolt back to STOCK. I really am unsure of what I need to download, and where I need to put things, and what I need to name them etc: Clearly I need to think twice before rooting my phone again.
Also when I go to plug my Thunderbolt into my computer via USB my computer cannot recognize the device, any suggestions why?
Thanks so much! Really really need help!
First off all it sounds like you have a pg05img.zip file on the root of the sdcard. Only way to remove it now is pulling the sdcard out and putting it in a conputer and deleting that file. Then you should be able to boot and/or get into recovery.
If that's not the case then i don't know what's preventing you from getting into recovery. Although, just a factory reset should not have caused this anyway.
Sent from my ADR6400L using Tapatalk
mini2215 said:
Hi all. i'm having trouble finding a specific thread to help me solve my problem. (I'm not too good with rooting, and should have not messed with it in the first place!)
Anyways let's get to my problems:
So I needed to take my phone to the Verizon Store, and without thinking went straight to the Factory Reset thing. Now everytime I try booting up my phone it gets stuck on the custom bootup screen and freezes during part of the animation and just stays there.
I have read things that say try going into hboot and doing recovery, but all's it asks me to do is update, then has me reboot. It doesn't update anything as it still does the same exact thing.
My question is, can someone please help guide me through the process of returning my Thunderbolt back to STOCK. I really am unsure of what I need to download, and where I need to put things, and what I need to name them etc: Clearly I need to think twice before rooting my phone again.
Also when I go to plug my Thunderbolt into my computer via USB my computer cannot recognize the device, any suggestions why?
Thanks so much! Really really need help!
Click to expand...
Click to collapse
How did you initially Root your device? I assume revo since so many have now. Like mentioned above make sure you check your sdcard and ensure there is no PG05IMG.zip on it. After you have checked your sdcard for that file and deleted it, or maybe it is not there try to get into recovery.
Pull your battery out and then hold Volume down + power. Where does that get you? Hopefully you made a nandroid of your device after you rooted. If you followed a guide that was most definitely recommended. If this takes you to recovery just do a restore.
If you get restored there are some very good guides that Google will lead you to on how to unroot and return to stock.
1Sorry for the super late response, I'm going to try everyone's advice now, thanks so much for the help!
a factory reset will not unroot the phone. If your going back to stock, you have to unroot it. If you bring it to verizon rooted, they may deny you service...
as stated above, just search google or here for instructions how to return to full stock
I've been trying to root my wife's HTC Rhyme and in my efforts, something hosed the WiFi. All I get is "ERROR" under WiFi in the wireless network settings menu. This happened to me once or twice on my incredible and a kernel re-flash fixed it. I really want to root it so that she can have the benefit of being able to completely backup everything. I've tried ZergRush, TocoRoot, SuperTool, OneClick, SuperOneClick... none of it worked. The only thing that I've been able to do successfully is unlock/re-lock the bootloader.
Is it possible to extract the ROM and/or all critical system files from a stock rooted phone and use them to restore another phone that is malfunctioning? I was thinking that if I found someone with a rooted HTC Rhyme who would be willing, they could send me whatever files I would need to completely restore the phone, WiFi and all.
Any help with at least the WiFi issue wold be appreciated. Rooting would be nice too but I don't want to be greedy.
Thanks.
I was able to install an RUU which fixed the WiFi issue, but now the phone is stuck in a boot-loop. I've flashed it three times (doing it twice each attempt) but its the same result every time. The phone boots normally the first time, then goes into loop on the next restart. Could be the wrong RUU, could be corrupted or maybe I'm doing it wrong. I don't know.
Please... Any suggestions would be most appreciated.
I fixed it.
RuLEoF2 said:
I fixed it.
Click to expand...
Click to collapse
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks!
itandy said:
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks![/QUOTE No root, but it's working and back to No root, but it's working and back to factory condition. factory condition.
I used CWM recovery to format all partitions I used CWM recovery to format all partitions (data, system, cache, devlog, etc.) as well as (data, system, cache, devlog, etc.) as well as the sdcard. the sdcard. Once that was done, I relocked the Once that was done, I relocked the bootloader and ran the RUU. bootloader and ran the RUU. This time I went This time I went through the entire setup process for the phone through the entire setup process for the phone (activation, market account, WiFi and so on) (activation, market account, WiFi and so on) without rebooting first. without rebooting first. After the setup, I After the setup, I rebooted and I started normally. rebooted and I started normally. About 20 About 20 minutes later, I got an android OTA update of minutes later, I got an android OTA update of some kind and now its fine. some kind and now its fine.
Not sure why setting up the phone would make Not sure why setting up the phone would make a difference, but formatting the partitions and a difference, but formatting the partitions and going completely clean-slate is probably what going completely clean-slate is probably what did the trick. did the trick. Something must have been stuck Something must have been stuck in memory from the first failed attempt and it in memory from the first failed attempt and it was corrupting the following attempts in some was corrupting the following attempts in some way. way.
I'd still like to root it, but anyway... it's fixed and I'd still like to root it, but anyway... it's fixed and my wife's is glad to get her phone back. my wife's is glad to get her phone back. Happy Happy ending. ending.
Thanks to all for your assistance.
Click to expand...
Click to collapse
RuLEoF2 said:
itandy said:
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks![/QUOTE No root, but it's working and back to No root, but it's working and back to factory condition. factory condition.
I used CWM recovery to format all partitions I used CWM recovery to format all partitions (data, system, cache, devlog, etc.) as well as (data, system, cache, devlog, etc.) as well as the sdcard. the sdcard. Once that was done, I relocked the Once that was done, I relocked the bootloader and ran the RUU. bootloader and ran the RUU. This time I went This time I went through the entire setup process for the phone through the entire setup process for the phone (activation, market account, WiFi and so on) (activation, market account, WiFi and so on) without rebooting first. without rebooting first. After the setup, I After the setup, I rebooted and I started normally. rebooted and I started normally. About 20 About 20 minutes later, I got an android OTA update of minutes later, I got an android OTA update of some kind and now its fine. some kind and now its fine.
Not sure why setting up the phone would make Not sure why setting up the phone would make a difference, but formatting the partitions and a difference, but formatting the partitions and going completely clean-slate is probably what going completely clean-slate is probably what did the trick. did the trick. Something must have been stuck Something must have been stuck in memory from the first failed attempt and it in memory from the first failed attempt and it was corrupting the following attempts in some was corrupting the following attempts in some way. way.
I'd still like to root it, but anyway... it's fixed and I'd still like to root it, but anyway... it's fixed and my wife's is glad to get her phone back. my wife's is glad to get her phone back. Happy Happy ending. ending.
Thanks to all for your assistance.
Click to expand...
Click to collapse
How did you get the ruu to run i keep getting a error 140 wrong bootloader version i tried ruu 1.26.605.11 and 1.26.605.6 i attempted to flash a ics rom and the phone got stuck on the splash screen so then i used my backup i made before i flash the ics rom and wouldnt boot so i extracted the boot.img from the ruu and flashed it to get the phone back up and running the phone is still rooted but i have no wifi no bluetooth no cam i been searching everywhere for a rhyme kernel bt no luck if anyone could help that would great
Click to expand...
Click to collapse
OK so let me start off with, great site. I have read a ton of information.
First: Siyah 4.3.3 (Latest) Kernel which now has been put to AJK v1.48s
ROM; SHOstock3 v2.5.9
PreMod Settings: SGS2 AT&T SGH-i777. Started with GB > AT&T OTA (KIES) 4.0.3 > AT&T OTA WIFI 4.0.4 (caused huge freaking headaches with battery, charging, turn off the phone loop, battery draining, etc.)
Issues:
Original Issue posted in this thread (viewing Single Post) http://forum.xda-developers.com/showpost.php?p=39350619&postcount=18
Creepy offered something to try. That never worked as all I was able to do was download mode or stare at the Samsung Galaxy S2 Splash Screen. Well, I took to his download repository and other links and used his One-Click Recovery to stock GB Rom to make part of my phone usable, using this link here: http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
While it is Gingerbread at least my phone is usable. I want to try his STOCK ICS method but that mentions the eMMC super-brick bug.
So this is what I have tried so far. I have tried installing Siyah 4.3.3 nomswap for my kernel using Mobil-Odin Lite. That works but it never reboots or actually says finished. What it does do is stay at the wicked purple splash with the yin yang symbol. I left it like that last night until I woke up this morning and it never changed. So I rebooted the phone and the Kernel is on there. I reboot into recovery so that I can install SHOstock3 v2.5.9. That goes off flawlessly except here the last few times it won't reboot when I go to the GO BACK. It sticks and doesn't do anything. Rebooting shows the SHOstock3 Engine Boot Animation. Once it stops it goes to ask me for the encryption password. Well I put in my password (was the same one to the unlock screen) and it reboots and you see the nifty Samsung animation logo and then goes to the Samsung Galaxy S2 Animation Logo and then just stays there. It really pisses me off.
So after all that I finally put a new Kernel on there,AJK 1,48s. Pretty cool it loads up and then reboots. Well AJK shows up after the light-blue bar fills up and then goes black and the 4 touch sensitive row keys are lit up for a bit before going dark but the phone is still on. So I rebooted to recovery (CWM now with the Kernel) fixed tweaks, went to advanced and saw all sorts of options. Tried clearing caches for ROM 2 and restarting,no effect. I removed ROM 2 and went through reboot and nothing. Restored ROM 2 and nothing. Re installed SHOstock3 v2.5.9. Did the same thing after install and not backing out when I hit GO BACK. Rebooted, same scenario that happened before with requiring password. Entering password does the same thing with a reboot and then staying on Samsung Splash Screen. If I Don't enter the password and reboot,same thing happens. So after being irritated and pissed off I ran Creepy's One-Click Fix again and paid attention to the phone and noticed it mentioned not being able to access the AT&T section or partition or something like that. So while part of my phone works under normal circumstances I want to figure out how to remove that encryption part of the phone and get full access (even though full memory and space are shown under Windows 7 and the files on the phone). The password I put on there isn't taking and I don't know if using PC methods for removing encryption (which could take awhile I know) needs to be employed (and if so which methods) or if that part is just screwed and I can't put on any other kernels or custom ROMs. Perhaps tell me where I messed up. Should I try swapping the ROMs from Advanced setting in CWM Recovery? Can I try a different ROM (kernel didn't seem to help)? I have done several factory resets dalvik cache wipes cache wipes formats,etc. and it is still there. I can say that before the whole encryption debacle (even though I was encrypted I did get in my phone after encrypting it) my pin unlock for my SIM wouldn't work and I actually SIM locked my phone. Had to go to AT&T and get a new SIM and was up and running. I put a 4 digit pin lock for the SIM (it let me do it) and when I went to unlock it after a reboot, it wanted an 8 pin for the PUK and wouldn't take what I put. I tried to change the PIN but to no avail. Once that happened I guess it snowballed. Any help is appreciated. I have searched and tried some things that looked to match my issue but none have totally helped. I do have ADB set up on my wife's laptop which I use to restore my phone to GB Stock ROM. I haven't been able to reboot the phone into Bootloader to do any fastboot commands as when I tried to do it the commands just sent the phone into normal reboot (though adb reboot recovery does boot to recovery). I Haven't tried booting to the bootloader using the new Kernel though so I will wait for confirmation or additional information before I try. Thanks guys.
Eagle
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Thank you so much creepy. I will give that a try later and see how it goes. I hope the information I gave actually gives enough info. I know folks usually want enough. Ill post back my findings.
Eagle
quick follow up and what I tried
creepyncrawly said:
Couple of comments. Siyah 4.3.3 (and ajk) kernels are for 4.x ICS and JB so that explains why your stock Gingerbread system would not flash after you installed it. If you flash back to stock Gingerbread again, and then flash a custom kernel, use a kernel that is compatible with Gingerbread if you want to boot the system.
After doing a little research, it seems that a wipe data/factory reset will not clear the encryption, but a format data will. This information is not from a Samsung forum; it's from the Droid DNA forum. I'm thinking that the same thing may apply to the I777. See the thread here.
It might be worth a try anyway. Flash stock plus root Gingerbread, install mobile odin or mobile odin lite, and use it to flash Siyah 2.6.14. Boot into recovery and go to the Mounts and Storage section. There you can format data, (and all the other partitions, separately.)
Click to expand...
Click to collapse
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
WarEagleUS said:
Hey Creepy, I have a quick follow up and want to tell you what I have tried.
So I had already used Kies to move to AT&T v 4.0.4 ICS on my phone when I read your post. Rather than flashback again to GB I went ahead and put Siyah 4.3.3 on my phone. Went great, rebooted and installed quick and everything. Well I rebooted into recovery and went to mounts and storage and formatted the data and all that there and even formatted the secondrom data and all that. Did it a couple times to make sure everything was clean and good to go. Even put AJKs kernel on there after I ran the cleanrom script and it went flawlessly. I did factory resets and wipes and all that and installed SHOstock3 v2.5.9 and started up great. Well it got past the animation and the damn Password for encryption popped up. Well I put the wrong password in and it rebooted without the SAMSUNG screen and went through the boot ani and back to the password for encryption screen. I put the right password in, it reboots and you see the Samsung logo flash quickly and then it sticks on the Samsung Galaxy S2 Splash screen. I don't know what is holding it up from going forward unless when I messed up the first go around and it deleted everything if it didn't take out the bootload command or what have you. So I don't know if this idea will work but I am going to flashback to GB and put the siyah version on there that you linked and see if that will work.
One tihng, when Iencrypted the device the first go round, I onlydid the used data and area not the whole thing. Is this affecting it somehow? Any other ideas to try? I figured a full data format would remove the encryption but it never pops up saying all encryption will be removed. What I need is access to that area of the phone if I could just mount it on the computer. Is it possible after formatting the data, or before, that I should mount internal USB, DATA, etc and try another format/wipe or at least mount them to see if they can be used? Thanks for the help. For anyone else viewing this post (which actually is a lot) any help or ideas are appreciated. I am thinking I may need to format everything and get ahold of Samsung to see if they will reset my phone for me. I just wonder if the PIN lock on my SIM card that got locked when it wouldn't take my PIN didn't mess something up as well.
Eagle
Click to expand...
Click to collapse
Should I try TWRP instead of CWM and if so where should I grab it from?
Status Update
So this is what I have tried so far as of this moment.
I reflashed using your Stock + Root Gingerbread ROM.
Wiped DATA and everything in recovery menu several times.
Used Kernel Wipe and ROM Nuke for extra cleaning power.
Reinstalled the Kernel AJK and SHOstock3 ROM
Haven't installed any themes though I had Johns Blue and Villians Poison Base Theme (I believe that is what it is) on there when this all went down. Should I put them back on there?
Password still pops up. So what it looks like is that unless I stick with the unencrypted portion of the phone, I am screwed with any custom ROMs as the correct password has the phone restart and then stick at the Samsung Galaxy S2 Splash Screen. Apparently I still cannot access that area of the phones memory to wipe it at all no matter what I do. I need to access it somehow. Really driving me crazy and thinking I may need to talk with AT&T(as Samsung told me to earlier this morning lol) and see what they can do.
One thing I do notice is when I use your stock root program it actually removes the encryption or decrypts the section of the phone for the stock ROM to go on the phone which is cool.
Eagle
Any other things to try from anyone is greatly appreciated.
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
WarEagleUS said:
would restoring my original EFS before this whole process help or is the encryption section totally blocked off?
Click to expand...
Click to collapse
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
creepyncrawly said:
Been away all day. Sorry, I can't offer any other suggestions, but I have no experience with encryption. As you said, what you need to know is where the encryption is stored in memory so you can wipe or format that and restore it to original. If you can get to the right person, probably not level 1 tech support, then maybe you can find out. Somebody somewhere knows the answer to this.
Click to expand...
Click to collapse
Thx bro. yeah I need to run some forensic tools and see if I can mount the whole phone system on my PC and run the tools.
creepyncrawly said:
I have no idea whether the encryption is stored there. What kind of efs backup did you take?
Click to expand...
Click to collapse
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
WarEagleUS said:
a full efs backup. I made two or three actuakky using advanced efs, nitrality, and recovery.
Click to expand...
Click to collapse
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
creepyncrawly said:
A little research indicates that there is quite a bit of stuff stored in efs besides carrier specific data. So maybe encryption could be in there. Of those tools, nitrality for sure and maybe advanced efs should be able to restore the entire efs partition. If you are comfortable with the risk - a damaged efs would render the phone useless - then you might try this to see if it clears up the encryption issue. BTW, you should learn how to back up the efs partition yourself using terminal and linux commands.
Click to expand...
Click to collapse
Yeah I should have used ADB to do that from the get go. I should have used the wife's laptop like I started to instead of my WIN 8 machine has it seems to be finicky with Android SDK (the portion at least needed to run ADB). Linux commands really aren't much different than terminal and I have done both. I was actually trying to get fastboot commands to work but my bootloader wasn't cooperating and for the life of me I couldn't find how to unlock it. I may try restoring that EFS. If nothing else I would love to be able to format that EFS and replace it with my original copy though as you said a damaged EFS may actually cause issues (who knows if it is damaged). I do know that I am fixing to chat with AT&T support. I hope I don't have to drive down to Hoover, AL to the repair facility. I would rather them send me a phone and send this one back. I am on stock 4.0.4 ICS from AT&T and any root that may be on there (though I doubt there is now) I can remove and what not
Thanks for the advice and insight Creepy. I know you tried like hell to get me an answer but in doing research on here with other problems I found out some useful information going forward my friend.
Eagle
Well, looks like I will be getting a special early upgrade and the wife will as well. I will be keeping this phone, however, to mess with this and see if I cannot get this problem fixed. Thanks Creepy so much. I appreciate your research and help more than you know. If possible I would love to keep this thread open for a while just in case I figure this out and fix the issue. It may take me a week or so but I will get back to messing with it again.
A side note. You don't need the whole sdk to get adb. You can download just the files you need from my signature.
Sent from my SGH-I777 using xda premium
I have a s4 schi545 and used the all in one tool for rooting my phone. It worked successfully, so I ran the install twrp 2.5.0.2 I then went to the cyanogen website and put a rom on my phone in a folder and tried to load it onto my phone. The cm loading screen just loops endlessly and I cannot get my phone back on, can someone please help me I am starting to freak out a bit.
edit:
I got it to open with recovery mode, now is there a way I can have it boot into the 'default os' ?
You flashed cyanogenmod in, so the stock rom is gone (unless you actually performed a nandroid backup which you could restore if you did). You are going to have to mount your phone to a PC and load a different rom to flash.
bhellings said:
I have a s4 schi545 and used the all in one tool for rooting my phone. It worked successfully, so I ran the install twrp 2.5.0.2 I then went to the cyanogen website and put a rom on my phone in a folder and tried to load it onto my phone. The cm loading screen just loops endlessly and I cannot get my phone back on, can someone please help me I am starting to freak out a bit.
edit:
I got it to open with recovery mode, now is there a way I can have it boot into the 'default os' ?
Click to expand...
Click to collapse
Did you do a factory reset when loading the new ROM? You can't carry data from one ROM to another. If you really want to go back, as stated above you'll need to use Odin to flash the stock firmware.
You may have to go back to stock if you didn't make the backup and start over.
You can restore your phone to factory here
http://forum.xda-developers.com/showthread.php?t=2301259
Just make sure you follow the Op's directions carefully...
He didn't wipe ..
Sent from my SCH-I545 using Tapatalk 4 Beta
Thanks alot.
Before I went to sleep last night I rebooted in recovery and did a data wipe, I had no idea you had to clear the entire os and am happy to know the stock os is now gone, I was going to ask that today. What do you guys think of CM 10?
Thank you all so much.
Hi, guys
my phone is Huawei p10 Lite (WAS-LX2)
Note: if you have a bricked huawei p10 lite of any kind (incl WAS-LX2) (or a NZ model)
and you want to know how i finally fixed mine, jump down to the end where it says
GOOD NEWS
quick synopsis: unlocked bootloader, flashed twrp, now i get an error (255) when trying to create backup using twrp..
you can read the rest if you want but the above basically covers it please help
so i have unlocked my bootloader and flashed twrp, before i did this i did a factory reset through androids settings, the phone is also only two months old.. but i cannot create a backup using twrp, it always fails in the same place when backing up data, does this mean my stock rom that has never been altered in anyway ect is somehow corrupt? wtf? i havnt even rooted it yet, i was going to make a backup first (of a known good rom.. lol)
i am assuming the data files are part of the rom? not something you can ignore.. they were one of the few things selected by default.. i have tried rebooting phone a few times, formatting sd card etc (64gb) so there is plenty of space...
any help would be much appreciated
the tutorial i was following is here: https://forum.xda-developers.com/p10/how-to/twrp-how-to-root-p10-lite-t3617418
my phones full build (or do i mean firmware number?..) number: WAS-LX2C706B170
android version 7.0
emui 5.1
any more info, just ask..
also, ive heard that once you have installed twrp/ unlocked bootloader you cannot use system update or androids factory reset without bricking your phone? is that true? otherwise i want to try that, i just want to root my damn phone already... or... its been a long time since i last rooted a phone... you dont need root to make a twrp rom backup do you? nah, surely not..?
or could my twrp install be corrupt? the tutorial said to drag and drop the downloaded file into cmd, but that wasnt working so i entered the location manually, it still appeared to install fine that way though so surely thats not it. i dont know
ok, i just bricked my phone... i did a factory reset in twrp, thinking it was... a factory reset... i googled whether it was safe first and everything came up clean... but it is not it wiped the os or something and now i just get a boot loop... what the hell? how could i be so stupid?! and how could twrp not warn me.. it was just a factory reset? and i havnt even rooted it yet, at this point i would probably prefer it was rooted in the hope their would be more options available to me to un brick it.. ok now i really need someones help.. why am i drinking and trying to watch tv while doing this, i am so stupid, this is the best and most expensive phone ive ever owned, what have i done?! sorry sorry ill calm down...
so if my firmware number is: WAS-LX2C706B170 then can i use one of these (also for huawei p10 lite) and if so what would be the difference? why are the numbers slightly different? same phone model, different firmware/ slightly...
here they are:
WAS-LX2C706B120
WAS-LX2C185B121
and they each had a OTA and a full firmware version too.
here is the link: https://romfirmware.com/2017/08/04/huawei-p10-lite-was-lx2/
but before i try these things, is there any saving my current stock rom? i dont understand how a factory reset could prevent it from booting properly..? its not actually bootlooping, it either gets stuck on logo, or goes to black screen but you can still see the volume slider when pressing volume buttons, see the home and back buttons (which do nothing) and hear the lock sound when you press the power button... still always a black screen though.. i guess its possible i knocked the format data button in twrp but im 95% sure i didnt. if i remove twrp and install stock recovery would i be able to get the stock rom working that way? or is there any way to do an OTA update/ fix as i havnt rooted it yet so it should be capable (except i cant boot to rom..) if i hold down all buttons it seems to try to do something... it says emui then goes to 4% then says software install failed: the update package does not exsist. please download the package again... reboot system now..? whats that all about?
ok, so i have found a possible solution but would like confirmation from someone who knows these things first...
i found this tool: Huawei Firmware Finder (Team MT)
link: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
and using this i have found my exact firmware, apparently straight from the official huawei update servers. the firmware number matches exactly, but there is no mention of it being for a huawei p10 lite so not 100% sure its a good idea, but if the whole firmware number matches perfectly and its the only one of its kind it must be the right one surely? and the size is the same as other huawei p10 lite firmwares..
here is the direct link:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1514/g104/v89953/f2/full/update.zip
please someone else chime in to give me some advice...
is there any risk with flashing roms, or can i always still access twrp recovery to flash a new rom if i brick the phone?
cheers all
ok UPDATE:
i tried the repair file system option in twrp on the data partition just for fun (wrong word, im not having fun..) because i thought this rom was a lost cause..
upon reboot a huawei warning pops up saying the data partition has some serious damage and offers to try a low level format, it finishes successfully then restarts.
no change, still broken, but it offers to do a full format of data due to serious damage.
after restart phone boots fine, and enters setup wizard for first boot etc... perfect.
problem is, i still cant backup the data partition in twrp, still get same error:
createTarFork() process ended with ERROR: 255
bacjup failed..??
did i somehow get a brand new phone with a bad flash of a stock rom straight from the manuafacturer? with a slightly corrupted data partition... is there anyway to fix this? or can i assume the rom i downloaded from huaweis servers for my exact firmware is correct and i can use that as a backup in case i need it?
or in case my data is corrupt should i try to install that rom now?
or should i try to reflash twrp first and see if i can get a successful backup?
or should i just forget all this crap now my phone works and go straight to rooting it?
i really need some professional advice here.. lol
clearly i aint no expert
ok, so i noticed the frp was still locked for some reason so using adb, i relocked and unlocked bootloader, now frp is unlocked too, reflashed twrp, wiped dalvik cach/ cache, tried backup again...
no change, still fails on data partition, same error 255...?!
im lost,
close to trying to flash that rom i found...
or at least just rooting already..
OK UPDATE: first the bad news, then the good news:
so i gave up on backing up my data partition, as it was clearly somehow corrupt?...
so i went ahead and rooted my phone, everything was more or less working untill i used apps2sd...
that required several reboots and partitioning my sd card etc, then it said something about needing systemless root and a reboot, i went ahead with that and then my phone started bootlooping again, this time there was no fixing it, i of course tried removing sd card too.. nothing..
so i tried restoring to the rom i found using huawei firmware finder tool, that didnt work, using twrp to install zip, i got error -9? (couldnt find that one on the net..)
tried unzipping and putting update.app in dload folder on root of sd card, then booting to erecovery pressing vol- vol+ and power button, that also failed. now i was stressed near tears, this was the third day of research and trying to fix this... so i searche dhigh and wide, and gave up on stock roms, i figured that a custom rom designed for my chipset (hi6250)
and said to work on a huawei p10 lite then it should at least semi work on my phone, i did more research and the rom creator said to only use his version of TWRP to flash their ROM, so i reflashed to theirs... BIG mistake, if the custom recovery is the only thing you can boot into and the only way to access boot loader, do NOT risk losing it.. i did.. i lost my recovery..
so there for i lost my bootloader, so therefore i lost my ability to use ADB, or connect to pc in any way. i wanted to step in front of a bus at this point... but then there was:
GOOD news:
so i resorted to trying the official recovery roms on XDA for p10 lites, only i had been avoiding them as none of the build/ firmware numbers matched mine at all.. but i went ahead and clicked on the first download, (here is the link to post: https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097) - you might find a few comments from me near the end there, lol..
anyway , once downloaded i unzipped and just pasted the dload folder straight to sd card and rebooted phone with all three buttons depressed. to my amazement when the huaei erecovery came up it started installing!!!? wow, i tried not to get my hopes up though..
first boot restarted after blue huawei splash logo, second boot went back to erecovery, offered factory reset and wipe cache(so i did), now it boots up perfectly every time like new, everything works! even gave me NZ language options etc, even though my build number didnt match any of those above, its still worked and even better it still shows all the correct information under about phone.
my build number was: WAS-LX2C706B170
so i can confirm it works for nz huawei p10 lites with 4gb ram and dual sim and WAS-LX2 builds
hope this helps someone else out there like me
tags: all official huawei rom,stock rom,twrp.stock,backup,official,rom finder,nandroid,back up, save,solution,fix,help,stuck,advice,simple,easy,guide,tutorial,root,huawei,p10,p10 lite,huawei p10 lite,was-lx1,was-lx2,firmware,iso,image,zip,file,download,error 255,255,error,createTarFork(),
Hey, just wanted to say thank you for posting this!
I'm from New Zealand, and have the exact same phone and the exact same issue.
Your "good news" section was exactly what I was looking for, and helped me fix my phone.
Cheers, George
update copy
Hi was wondering if you have a copy of the update you used as it is near impossible to get from the link on the other thread. Another Kiwi with a bricked phone.
All good, after 4 hours it finally downloaded. I will keep a copy in case anyone needs it. WAS-LX2