Related
Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.
I noticed that when I use the spen on this protector I can see the traces on it. As a matter of fact I can still see today the traces from the first time I used the pen close to a month ago. Is anyone having the same problem with invisible shield? What screen protector are y'all using that is not having this problem and where you got it?
Thanks!
I was using a BodyGuardz (similar to the Zagg) and was seeing the same thing. That style just isn't made for a precise point pen like the note has.
I've switched over to an SGP Glass-t and could't be happier with the decision. There's a thread in the forum all about it - but it's basically a glass screen protector and after a short while using it - I wish I would have found them years ago.
i had one on mine (which has since been sold for a white one arriving tomorrow) and it does show traces, but only if you look at it from a serious angle with light reflecting off of it.
the zagg's are made to change shape, etc. which is one of the reasons why they are so durable.
i honestly didn't find any fault with the traces, as i had to truly look for them. a cursory glance wouldn't reveal their presence.
that said, i have ordered a glas.t to test it and see how i like it. i'm a huge fan of zagg and i cannot stand any other type of screen protector.
I hated the traces at first as well, but I only see them when the display is off and at an angle. It doesn't affect the function of the S-Pen or visibility at all. I wish it wasn't quite so "tacky" when drawing on it - I really hope it doesn't affect the durability of the pen's nub in the long run. But for me, protecting the display with something so durable and with a lifetime warranty (and free replacement and application through Best Buy) is worth it.
johnus said:
I hated the traces at first as well, but I only see them when the display is off and at an angle. It doesn't affect the function of the S-Pen or visibility at all. I wish it wasn't quite so "tacky" when drawing on it - I really hope it doesn't affect the durability of the pen's nub in the long run. But for me, protecting the display with something so durable and with a lifetime warranty (and free replacement and application through Best Buy) is worth it.
Click to expand...
Click to collapse
for reals. i love the feel *EXCEPT* when using the s-pen. i hope they release the HD and smudge-proof versions as they may help alleviate that (though i don't like either as much).
i've put on untold thousands of them in the past 3 years while working there :]
Fernandq said:
What screen protector are y'all using that is not having this problem and where you got it?
Thanks!
Click to expand...
Click to collapse
Here's what I'm using. Probably the best SP you can buy once you get over the price. There's no feel to it and it doesn't interfere with the S-Pen or touch.
Spigen SGP Ultra Crystal
Absolutely phenomenal.
Click HERE
I want to try the Glas SGP that modmyphone posted, but the "one shot deal" installation scared me. As well as I don't think my case will fit with.
If it protects my phone I won't care if it's $99, lol
I'm quite happy with the one I got from Ebay seller 'rdstore'. Clear as a bell and the pen doesn't leave any marks. Also, $1.49.
Any of the softwer type ones are going to do this. I just peeled off my ArmourSuit to send back for a new one (life time replacements) but dont know if i'll paply it since it'll just happen again. I love the wet type ones bc they are so easy to apply and zero bubbles. Plus I've grown to love the rubbery feel of them. I will continue to use them for the back of the phone as the rubber texture provides a grippy surface to prevent phone from sliding around, but will have to get one of the thinner nonremovable crappy ones as DrawSomething has left my screen saver looking horrid.
I currently have the Galaxy Mega and absolutely love it...that being said when i saw the google play edition of the Z ultra last night I got a bit envious. has anyone come from the mega and if so what are your thoughts? i know there is little size difference but what were your impressions?
obviously, i'm fine with big phones but i'm concerned about the camera since i have an infant and taking pictures is actually important to me now.
also, i am wondering if you can use the Samsung MHL cable on the XZU as i use mhl daily. would be nice not to have to buy another cable.
I have no experience with the Mega, but your MHL cable won't work. Samsung MHL adapters are 11 pins while the rest are 5 pins. Non-Samsung adapters are very cheap though ($10 bucks)
Sent from my C6833 using Tapatalk
I came from a Mega:
This is so much more powerful. Like, crazy powerful. It completely devastates the Mega. It's noticable the second you start using it, its just so fast and smooth.
The second big improvement is the screen. The Mega has an awesome screen for 720p, but the panel in the Ultra is epic.
The third big improvement is surprisingly battery life! The Ultra is considerably better.
Fourth big improvement is in signal quality. I am UK based so don't use LTE currently, but 3G the Ultra gets a stronger signal pretty much everywhere.
It's waterproof, which is never a bad thing.
Oh and I nearly forgot... Roms. There is already an excelent CM10.2 build available for the Ultra, as well as a fair few other roms and obviously the GPE just got announced and that will bring a tidal wave of very high quality roms. The Mega development section on the other hand is virtually a barren wasteland, and being both underpowered and Touchwiz inflicted it is in desperate need of a decent AOSP build. The Ultra is actually fine stock ironically, Sony only lightly skin Android and the stock rom is near-AOSP anyway.
On the downsides:
The Mega did fit in my pocket better, though I still keep my Ultra in the front pocket of my jeans just as I did with my Mega. The angular design looks good, but it is a little impractical on a device this big.
The touchscreen is prone to occasional mistouches, mainly if it's dirty. Not a big issue by any means, but a minus point non the less.
The camera is much better on the Mega, particularly in low light.
The "ASF" screen protection fitted as standard is stupid. It's plastic based, so it will scratch considerably easier than the strengthened glass beneath it and doesn't feel as nice under the finger. If you remove the film, which took me about 3 hours, the glass underneath doesn't have any oleophobic coating and so gets dirty easily. I plan on buying some of the Fusso replacement oleophobic coating on the net soon to resolve this once and for all, but that costs £20 and it shouldn't be necessary.
For me, the Ultra is the MUCH better phone. I'm really happy with mine, probably the best phone I have ever owned. :good:
i just returned my mega to buy a z ultra play edition, the mega wasn't powerful enough and didn't have enough customization options for me.
stiggy2012 said:
I came from a Mega:
This is so much more powerful. Like, crazy powerful. It completely devastates the Mega. It's noticable the second you start using it, its just so fast and smooth.
The second big improvement is the screen. The Mega has an awesome screen for 720p, but the panel in the Ultra is epic.
The third big improvement is surprisingly battery life! The Ultra is considerably better.
Fourth big improvement is in signal quality. I am UK based so don't use LTE currently, but 3G the Ultra gets a stronger signal pretty much everywhere.
It's waterproof, which is never a bad thing.
Oh and I nearly forgot... Roms. There is already an excelent CM10.2 build available for the Ultra, as well as a fair few other roms and obviously the GPE just got announced and that will bring a tidal wave of very high quality roms. The Mega development section on the other hand is virtually a barren wasteland, and being both underpowered and Touchwiz inflicted it is in desperate need of a decent AOSP build. The Ultra is actually fine stock ironically, Sony only lightly skin Android and the stock rom is near-AOSP anyway.
On the downsides:
The Mega did fit in my pocket better, though I still keep my Ultra in the front pocket of my jeans just as I did with my Mega. The angular design looks good, but it is a little impractical on a device this big.
The touchscreen is prone to occasional mistouches, mainly if it's dirty. Not a big issue by any means, but a minus point non the less.
The camera is much better on the Mega, particularly in low light.
The "ASF" screen protection fitted as standard is stupid. It's plastic based, so it will scratch considerably easier than the strengthened glass beneath it and doesn't feel as nice under the finger. If you remove the film, which took me about 3 hours, the glass underneath doesn't have any oleophobic coating and so gets dirty easily. I plan on buying some of the Fusso replacement oleophobic coating on the net soon to resolve this once and for all, but that costs £20 and it shouldn't be necessary.
For me, the Ultra is the MUCH better phone. I'm really happy with mine, probably the best phone I have ever owned. :good:
Click to expand...
Click to collapse
thanks for the help.
some of the things that make me weary of the XZU - i think the sharp pretty much sucks and prefer the rounded corners. i'm not sure if it being a bit bigger will be much of a problem or not. i went to the store to try to find one and its not in stock anywhere yet.
i really want a stock android experience though and i'll never ever get that on the Mega since they'll never get MHL to work and i use mhl daily with my appradio 2 and must have it.
that google play edition is so so tempting...i better not even mention i bought another phone after just getting the mega 6 weeks ago.
is it at all easier to use being so much thinner? i didn't think that would matter though in ease of use but not sure.
It's actually ridiculously thin. I have a hard time picking it up from the table. It's almost like trying to pick something flat off the ground and you can't really get a grip. It would've been brutal for the pockets if it was thicker.
Sent from my C6833 using Tapatalk
LordManhattan said:
It's actually ridiculously thin. I have a hard time picking it up from the table. It's almost like trying to pick something flat off the ground and you can't really get a grip. It would've been brutal for the pockets if it was thicker.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
do you use a case with it?
i am also confused about this screen protector? is it a protector just built onto the phone that most people don't like or remove but its really hard to take off? i haven't seen any reviews mentioning it.
I'm not using a case. I like to use my devices naked. The screen protector is an "Anti shatter film" that's preventing glass from shattering once you break it. You may remove it if you want to, but I've heard that it takes like three hours to do it since it's really thin and it breaks into tiny pieces. It's not a good protector, so the oleophobic layer (anti smudge) layer will start to come of after some use. Also, since it's a plastic sheet, using pens on it to take notes or draw isn't recommended since it will naturally scratch it. Sony sure employed a brainiac to do this job, and I can't understand why they would do this.
Either way, that's just how it is. You won't notice or even see the protector, and if you get scratches, you can remove it and use your own protector. It just takes a lot of time. You can read all about it in a thread that's lying around here some place.
Sent from my C6833 using Tapatalk
knives of ice said:
do you use a case with it?
i am also confused about this screen protector? is it a protector just built onto the phone that most people don't like or remove but its really hard to take off? i haven't seen any reviews mentioning it.
Click to expand...
Click to collapse
I'm using a black TPU case I got off ebay for £3, it doesn't add hadly any bulk but ofers decent protection.
I bought the Mega for the mrs. She wanted a large screen but doesn't need all the bells and whistles and see loves it and is used to TW having come from a note 2.
Honestly I like both devices, but for a hardcore tinkerer like me I had to have the Ultra.
baileyjr said:
I'm using a black TPU case I got off ebay for £3, it doesn't add hadly any bulk but ofers decent protection.
I bought the Mega for the mrs. She wanted a large screen but doesn't need all the bells and whistles and see loves it and is used to TW having come from a note 2.
Honestly I like both devices, but for a hardcore tinkerer like me I had to have the Ultra.
Click to expand...
Click to collapse
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
knives of ice said:
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
Click to expand...
Click to collapse
Give them a call and ask if they have it before you go out the door
knives of ice said:
yes, i just wish there was somewhere i could go check out the device before buying it.
the biggest thing i think i will hate is that screen protector on the phone. that seems like the dumbest decision ever to put that on out of the factory.
there is a sony outlet store about 40min from me i wonder if they would have one, surely they would
Click to expand...
Click to collapse
You can't see the factory fitted screen protector. I have a normal screen protector on top as well and its invisable if you take your time to install it carefully :thumbup:
Sent from my C6833 using Tapatalk 4
Yeah, you won't notice it at all unless you get some bad scratches. Just treat it as a gadget, and not a piece of meat, and you probably won't get any.
If you have an infant and pictures are key for you then avoid this phone like the plague. I have young kids also and this camera sucks. However otherwise the phone is very good in every other aspect.
knives of ice said:
I currently have the Galaxy Mega and absolutely love it...that being said when i saw the google play edition of the Z ultra last night I got a bit envious. has anyone come from the mega and if so what are your thoughts? i know there is little size difference but what were your impressions?
obviously, i'm fine with big phones but i'm concerned about the camera since i have an infant and taking pictures is actually important to me now.
also, i am wondering if you can use the Samsung MHL cable on the XZU as i use mhl daily. would be nice not to have to buy another cable.
Click to expand...
Click to collapse
I dont like Samsung products, bcuz they all look like sanitary napkins.
I'm waiting for my ZU to come in the mail I'm so excited coming from a Mega 6.3!
After playing with a friends ZU, the thing that I will appreciate most on the ZU is the faster processor and larger RAM, although I must admit I do wish the camera on it was a bit better with flash!! I'm a girl and I like to take selfies geez... :silly:
LordManhattan said:
I'm not using a case. I like to use my devices naked. The screen protector is an "Anti shatter film" that's preventing glass from shattering once you break it. You may remove it if you want to, but I've heard that it takes like three hours to do it since it's really thin and it breaks into tiny pieces. It's not a good protector, so the oleophobic layer (anti smudge) layer will start to come of after some use. Also, since it's a plastic sheet, using pens on it to take notes or draw isn't recommended since it will naturally scratch it. Sony sure employed a brainiac to do this job, and I can't understand why they would do this.
Either way, that's just how it is. You won't notice or even see the protector, and if you get scratches, you can remove it and use your own protector. It just takes a lot of time. You can read all about it in a thread that's lying around here some place.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I owned the original Xperia Z and loved the mobile. Reviewers all gave it some negative feedback as when they sat in the kitchen they could not see the screen from the living room due to what they called "Poor viewing angles". I found this odd and got into all sorts of trouble on one review site, Trusted reviews, where they are anything but' trusted'.
I digress. The Z came with this new 'anti shatter film' Point is within only a few days of very respectful use I could actually see tiny marks on this laminate membrane. I spoke with the Sony importer here who advised me to fit a screen protector, in some countries they where sold with the screen protectors in the box. At that time this confused me as I thought both one and the other where the same thing? Not the case at all.
The anti shatter film is fitted as when the water resistant idea was in development the designers realised that customers would use them by a pool or near water like a beach. This caused some concern as if the phone got wet it became slippery and if dropped the screen could shatter and leave shards of glass all over the place where people could cut themselves (not to mention the cost of emptying and refilling a pool). To prevent any such problem and, I guess, avoid legal action? Sony fitted the new range of water resistant devices with these anti shatter films. Great idea.............
IN PRACTCE they have proved so soft they scratch far to readily and in terms of the Ultra it would be suicide to use a pencil on that anti shatter film.
here again is Sony being innovators of great new developments yet so often dropping the ball at the last hurdle!
I have a very decent screen protector fitted on my Ultra that I always order the same time I purchase any phone, phablet or tablet. I also always purchase a decent cover to further protect the device. I would like to use them without a cover but just cannot bare to think of scratching my devices. So good looking yet the cases do hide their good looks also add greatly to the bulk.
Life is all about compromise though.
I suggest comparing the Samsung mega against the Ultra is an unfair test to start with. Size being the only common denominator. With the exception of the camera, so I am told, the Ultra is made to a higher standard in terms of materials used in construction also the other operational hardware is more advanced. I am a Samsung fan but have never been a fan boy of any brand. Its a question of purchase what satisfies ones needs and requirements. I also own the SG Note 3 and gear, they are both now boxed and in a draw ready to sell.
Ryland
i used a bodyguardz pure tempered glass on my S6 and it was pretty awesome...
i got the same brand and model for my new S7 and i noticed the very edges of the screen protector dont seal down all the way (probably because slightly more curve on the screen for S7?)
but my biggest issue is it appears to be messing with the touch sensitivity.. i find myself have to touch more than once or press harder to get it to register my finger touch..
anyone else experiencing similar?
Yea I experienced this with xtremeguard's Spartan glass.
Tried a few unbranded protectors and have the same problem.
Apparently the S7 is the first time Samsung made their own touchscreen digitizer, and hopefully this is the last time too.
No screen sentivitity issues here
I have taken a look at this tempered glass screen protector and can personally say that there are no sensitivity issues with it. When using the, Galaxy s7 remained as responsive as ever. It's pretty durable as well which really surprised me. I have tried a few brands for screen protectors to see which I like best and the Coral brand comes in high for me. If your looking for full screen coverage but don't want to impact your phone, then you may want to give it a try. You can checkout their website. Coralguard.
I've read that many people are having issues with the Samsung panel and hoping that it's not hardware related and can be fixed with some sort of software update. The only problem there is that carriers take so long to distribute.
Good luck.
emcdow said:
I have taken a look at this tempered glass screen protector and can personally say that there are no sensitivity issues with it. When using the, Galaxy s7 remained as responsive as ever. It's pretty durable as well which really surprised me. I have tried a few brands for screen protectors to see which I like best and the Coral brand comes in high for me. If your looking for full screen coverage but don't want to impact your phone, then you may want to give it a try. You can checkout their website. Coralguard.
I've read that many people are having issues with the Samsung panel and hoping that it's not hardware related and can be fixed with some sort of software update. The only problem there is that carriers take so long to distribute.
Good luck.
Click to expand...
Click to collapse
This one !
https://www.youtube.com/watch?v=qL-9u0dnzuk
I feel like I have a Nexus one s7 touchscreen very bad...
Luthein1 said:
I feel like I have a Nexus one s7 touchscreen very bad...
Click to expand...
Click to collapse
Dude i really hope this isn't an actual thing, please call samsung and see if they can do anything about it.
Cuz we got a few devices as a family and my sister was complaining about her screen as well. She said its better now though and she's coming from APPLE so i thought it was just that apple to samsung touch response difference which made her thing it was not working properly.
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Warning: As seen in the video at the 10:26 mark it is very important as a beginner that you make sure the surface is level (Use a physical bubble level and have business cards nearby) and leave the alignment bars (Plastic L Shapes) on during the curing process with the UV light, otherwise the screen protector may slide off of the phone. I was doing this for a friend at his house with the table he had, therefor as you saw at the 10:26 mark it began to slide away. Me doing so many installations I was use to this sort of thing happening, and quickly corrected the issue. I find the alignment bars to get in my way when moving the screen to the most case friendly position. However when I started out I did use these alignment bars, think of them as training wheels. Just be sure when you manually align the screen protector that the alignment bars are not lifting out of their 3 bumps and that they are not lifting your screen. Make sure your surface is level otherwise the adhesive could pour over the edges of the phone. Business cards help immensely, along with not working on installation in the middle of a 2 piece table.
Review
Before I continue please keep the "It's too expensive" posts out of here. Other glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Confirmed List
Commuter
Symmetry
UAG
https://youtu.be/sScL3ZyGTgI
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Here's a review of the Mophie case with the Whitestone:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
TheGame7 said:
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Review
Before I continue please keep the "It's too expensive" posts out of here. Other screen glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Click to expand...
Click to collapse
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
reyals1 said:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Click to expand...
Click to collapse
Thank you for the info! I am one guy so testing that many cases would have proved to be difficult for me. I have added your confirmed case along with a link to the video in the original post.
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
I'm sure all will go smoothly, don't be nervous, I was at first, but there absolutely is no reason to.
yoyoche01 said:
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Happy to assist. My failures are your success
Whitestone Dome Glass said:
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
Click to expand...
Click to collapse
Wow I can say I am pleasantly surprised. I didn't think that I would catch the attention of Whitestone themselves. Absolutely brilliant idea with the screen protector I must say! I really appreciate the positive feedback and will make note of your feedback in the topic and video! I do typically remove the alignment bars pre-cure as they get in my way for aligning below the camera. They tend to lift up and sometimes lift the screen protector up while I adjust towards the edge of the camera. My video is the perfect example of making sure you have a level surface and I will make a note in the video and in this topic that newer purchasers of Whitestone will want to have a physical bubble level nearby to complete the task or potentially have level issues as shown in the video or to be sure and keep the alignment bars installed and make sure to keep an eye on the edges for any possible lifting.
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
reyals1 said:
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
Click to expand...
Click to collapse
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Please can you give a link to buy?. I bought in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some scratch that I can't explain but I don't want buy full package
raimondomartire said:
Please can you give a link to buy?. I buy in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some damage but I don't want buy full package
Click to expand...
Click to collapse
Since the replacement kit is only 5$ cheaper than a new kit (on amazon) it might be easier to buy a complete kit and sell the uv light to a woman who wants to use it for her nails.
The replacement kit should not cost more than about 10$, imho
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
faybarn said:
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
Click to expand...
Click to collapse
Hello faybarn, its Whitestone.
We currently do not sell on Amazon UK, we are still working on expanding our market! We may be able to sell on Amazon UK in the future. If you are still interested in buying our product, you can purchase it from Mobilefun.
If there are any further questions or feedback please let us know!
Thank you!
To anyone wanting to know the Mophie S8 and S8+ cases work great with this screen protector! I'll make a review video soon for it. The top of the case separates and you slide your phone in (no more plopping it in and out of a case hoping it doesn't touch the screen protector) then you slide the top down and it fits perfect. It's a 3300 MAH battery pack and from 25% with the phone on, it got me to 90% while I was using the phone. It also feels like it matches with the curvature of the phone. I recommend trying it out in store, as it is a bit heavier, but no where near as heavy as a ZeroLemon 10,000 MAH battery I had for the Note 4. Attached are some screenshots with the case and screen protector. Oh the speaker redirect to front is really nice too!
Here's a review of the Mophie case with the Whitestone:
Hi
I've bought one, but I mixed two align bars and now I don't know which align bar is for top and which is for the bottom. They are a little different. as you can see in pictures one has a small sticker attached to it at 45 degree angle while in the other one it is attached straight.
can anyone help to place these correctly?
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
andrewilley said:
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
Click to expand...
Click to collapse
Look at this video, this will answer your questions, it's very clear
It does seem to stick very well to your phone so that's good, I hate the usual (crappy) tempered glass protectors that only have glue on the sides... 1 "wrong" case and *pop* there it goes :/
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
pan_zhengwei said:
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
Click to expand...
Click to collapse
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Proday said:
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
do you mind sharing how's the alignment of your protector? mine doesn't seems to fit along with the case