Hello,
Hope you guys can help me. I'm lost right now. (COMPLETE NOOB)
Yesterday I rooted my htc amaze 4g with Hasoon's tool and it worked. Then I installed the Speed 8.0 rom on my phone and everything worked except that it did not recognized my mobile data. I could not even see the 4g in the corner next to the signal symbol.
After that I thought my Wind phone might not be 100% compatible with that ROM (since the rom might be for tmobile phones or something) so I tried the FastAmaze rom but the same. Now I'm trying to go back to the Stock rom, but I cant.
I tried downloading the RUU but once I start the process, it can not be completed. I don't get an exact error it only tells me that the usb might not be connected to the phone or to check the battery. I tried the same thing many times.
I really need data on my phone (Plus I'm paying for it). Can someone help me to restore the STOCK rom or to get data in the Speed or Fast Amaze rom? To avoid future problems I would prefer to just stick to the Stock rom, but if is not possible then as long as I can get data on my phone I'm happy.
A 1000 thank you to all of you.
PLEASE HELP!!!! (Again, I'm desperate)
Try flashing NRGz Rom and see if you have data. If not we can go from there
sent from my
NRGized amaze
powered by Faux
This is one thing I will never understand. When you unlock your bootloader and are ready to flash a new rom, why not DO A BACKUP!
Good luck with getting your data to work, you most likely will have to set up an APN from scratch, with your wind info.
And to get the RUU's to work, you need to reinstall the stock recovery.
andy55 said:
This is one thing I will never understand. When you unlock your bootloader and are ready to flash a new rom, why not DO A BACKUP!
Good luck with getting your data to work, you most likely will have to set up an APN from scratch, with your wind info.
And to get the RUU's to work, you need to reinstall the stock recovery.
Click to expand...
Click to collapse
Thanks was just coming in here to mention the apn.
Did you make sure the apn settings were set to your carrier?
sent from my
NRGized amaze
powered by Faux
I have a wind amaze.. I flashed the tmobile ruu a long time ago and had to set my apn's.. All works fine now but it took the jelly beans MMS app to get picture messaging working right.. Regular texts worked fine.. They try the tmobile Ics release and kernel.. I'm waiting on cm10 and debating the touch wiz or sense 4 roms as they are tmo based.. Which fixes the data roaming BS
e-Sex.. All of the carpral none of the tunnel
---------- Post added at 07:43 PM ---------- Previous post was at 07:34 PM ----------
I use 4ext recovery to flash and stock tmobile.. soff.. Rooted..
e-Sex.. All of the carpral none of the tunnel
Related
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
debinnv said:
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
Click to expand...
Click to collapse
What is the status of your Photon currently? Assuming it is rooted and unlocked, running what rom? Please provide info on what rom you are on now, which one you flashed from, and what process you used to get where you are. The more info provided the easier it will be to help.
Well lets see, currently I am back on stock, but here is what I did. I rooted, unlocked, installed CWM 5.0.2.7 I also flashed jokers recoveryv3 ( I follow QB's videos) So then I installed the gummy rom using this process. Format system, format data, format cache, wipe cache then dalvik cache. flash rom, flash rom again ( now I did not reboot into recovery after I flashed the rom the first time) I just went straight to install rom again. flash gapps, fix permissions. Reboot up and good loving it all. Waited 15 min then rebooted again. That's it. So I am at a loss. Thanks for help if you need any other info please let me know.
Oh I am on 2.3.4 with 198_7 also
In your system settings did you have "home only" or "automatic" selected for your roaming settings? For a lot of these roms, "automatic" is forced roam. And then if you didn't have roaming data enabled, that would explain why you were constantly roaming with no data.
Sent from my MB855 using XDA
Thanks so much .
I did have automatic checked but I did have roaming data enabled also. I flipped it around too with home only. I am truly beginning to think my phone is just plain "off " who knows. It's a shame though, I mean not that stock is bad on this phone but the custom roms are so much better imo. This is the first phone I have ever had a problem with. I have been flashing phones for years. Think I started with a HTC Mogul. That was a solid phone LOL
Does CM7 work for you? If it does then I reckon flashing that and setting it up, then instead of doing a full wipe keep your data and flash CM9 based rom over it, fix permissions and take it from there.
I have not tried CM7 but I can, sure can't hurt to try at this point. Thanks, I will give that a try tomorrow.
Have you tried *#*#4636#*#*? Sometimes flashing changes the radio in that menu. Be careful though, changing something can really Bork your phone. It should be on cdma prl I think
sent from my CM7 MoPho
Deb, my photon has never been kind to me with the 'flash twice' method. It always results in no data. Try cm9 again, but this time wipe cache, system, data, and dalvik, install version 3.1 of cm9, boot into it, reboot to recovery, wipe cache and dalv, then install the latest cm9 version. Always works for me. Good luck
Sent from my MB855 using XDA
Morning all, your all are great. Okay so I am ready to start again. I'm at stock right now so I need to get her all set up again. (Yes my phone is a she) Acvice, I am going to try your method first will let you know in a bit.
Looks like joker's site may be down so I need to try and find the 2 cm9 roms
I have this rom saved already on my computer
beta-0.6.9.1-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed.zip
Wonder if I should try that one or just wait
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
debinnv said:
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
Click to expand...
Click to collapse
You don't have to, but I recommend it.
Sent from my MB855 using XDA
I think th3bill has 0.3.1 in his fixes thread
http://www.mediafire.com/?y7no1r460d4o8zf
sent from my CM7 MoPho
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
debinnv said:
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
Click to expand...
Click to collapse
Glad someone provided you with that 3.1 link. Looking forward to see if it works out for ya.
By the way, you will know it worked if when you boot up in 3.1 you have working data. Flashing the newer version after that will essentially just update everything.
Deb, I take it the flash of 0.3.1 didn't work? Did you have data and then lose it when you flashed 0.6.9.3? What were your exact steps. I just rooted/unlocked and flashed my f-in-law's new photon and it worked just fine. Lemme know what you did and maybe I can help more
sent from my CM7 MoPho
Thanks bullfrog that's nice of you but honestly I'm good now As you know.
I didn't even try to install 0.3.1. I kept thinking about it, seeing I had no luck with 2 others previously so I decided to go the MIUI route and I'm a happy camper with that one. I am a flashaholic for sure, as we all are here. I am thinking though, I am gonna just be happy with where I am at for now. Of course I will most likely decide to give another rom a try at some point.
Of course I am already eyeing a few Samsung Epic touch's on ebay. I hear that one can be a brick just waiting to happen....weeeee I am having way too much fun
I'm glad you made it to MIUI. if you ever want to try cm9 or and of the similar ones (aokp, gummy, paranoid) I would suggest flashing that 0.3.1 first, then updating to the latest cm9, then flashing the variant
sent from my CM7 MoPho
I seem to have an issue with the radio/antenna on my EVO LTE- I am surrounded by towers that have LTE service but rarely ever get it and my 3G speeds avg between 8kpbs-250kbps.
I've updated profiles, reset msids, factory reset..etc etc ..to no avail.
So here is my question.
I'm Rooted and running Viper4G_2+- I have a nadroid backup with everything set just the way i like it. If I unroot my phone, flash a stock rom and exchange for a new device, can I root my new device, flash the Viper ROM and then nan restore? Or will it not work because its a new phone alltogether?
I want to do this ASAP cuz im sick and tired of not having any service but need to get anwers first. Thanks a million!
jkdkaliman said:
I seem to have an issue with the radio/antenna on my EVO LTE- I am surrounded by towers that have LTE service but rarely ever get it and my 3G speeds avg between 8kpbs-250kbps.
I've updated profiles, reset msids, factory reset..etc etc ..to no avail.
So here is my question.
I'm Rooted and running Viper4G_2+- I have a nadroid backup with everything set just the way i like it. If I unroot my phone, flash a stock rom and exchange for a new device, can I root my new device, flash the Viper ROM and then nan restore? Or will it not work because its a new phone alltogether?
I want to do this ASAP cuz im sick and tired of not having any service but need to get anwers first. Thanks a million!
Click to expand...
Click to collapse
It won't work, New phone Id...will cause a ton of problems
Sent from my EVO using xda premium
Hey guys, I'm an AT&T subscriber on an AT&T phone, and I can't get service after flashing a ROM in CWM.
This morning I flashed my G~Note i717 to Padawan 7. I noticed I could make calls and text, but all of my cellular data would not work. After a quick google, I assumed that I needed to reflash a modem, so I downloaded a UCLF6 modem and flashed it in CWM. My data still did not work, so I reverted to a stock android 4.0.4 ROM. Now, not even my SIM card is recognized. Cannot call, text, or data (wifi is still functional). It isn't an issue with the SIM, as it works in my iPhone 3GS, and my friend said it worked in his Galaxy SIII (LTE included).
Any suggestions?
PS: I've tried finding similar topics. Most of it was people on T-mobile trying to get their service to work on an AT&T phone. Still, I tried their fixes and no luck.
If you have voice and text, but no data, the modem is ok. The base rom you had is from Asia so it doesn't have the at&t data settings. You have to manually input the APN in the wireless settings.
I don't have any advice about the stock rom and your sim card issue, except to do a factory reset and re flash the rom.
rangercaptain said:
If you have voice and text, but no data, the modem is ok. The base rom you had is from Asia so it doesn't have the at&t data settings. You have to manually input the APN in the wireless settings.
I don't have any advice about the stock rom and your sim card issue, except to do a factory reset and re flash the rom.
Click to expand...
Click to collapse
Tried this, but still no luck. Thanks for the info though, I didn't know that about the modems. Anyone else have any ideas? I really don't want to go back to my iPhone on this one, even for a little bit...
Check the apn settings very closely..
Upper and lower cases, spaces and periods etc.
Even one small error will fail the data connection.
Could you show us the APN you have now please ?...g
gregsarg said:
Check the apn settings very closely..
Upper and lower cases, spaces and periods etc.
Even one small error will fail the data connection.
Could you show us the APN you have now please ?...g
Click to expand...
Click to collapse
I can't open the APN settings. It's under Mobile Networks, right? It says I must insert a SIM card to access those features. (SIM card is in, btw).
Understood ...
If you reverted to a stock rom then yes, that field is likely locked.
But you can add new APN'S with a rooted stock rom.
And I'm sure the problem lies there....g
Double check you have the card in the slot correctly. Its not hard to mess that up. Possibly borrow a sim card from anyone else (doesn't have to be at&t) and check that. Sim cards do get fried.
gregsarg said:
Understood ...
If you reverted to a stock rom then yes, that field is likely locked.
But you can add new APN'S with a rooted stock rom.
And I'm sure the problem lies there....g
Click to expand...
Click to collapse
Any pro-tips/linkies on how to do this? Can't find anything that involves bypassing that little "Insert a SIM card to access these features" warning.
If it helps, my rooted ROM is 4.0.3 stock now, UCLD3.
Also, yeah, double and triple checked my SIM. It works just fine in my iPhone, and my friends' SIMs aren't recognized by the GNote.
No tricks I'm afraid .
If the "no sim" error persists, no APN additions can be made.
At this point, I would factory reset the device and try setting up again.
If that fails, I would Odin back to stock GB 2.3.6 and test again.
If you elect to Odin back, you must fully wipe the device first....or it won't be happy ...g
---------- Post added at 10:41 AM ---------- Previous post was at 10:35 AM ----------
UCLD3 rom???
That's either Rogers , bell , or telus ..
I'm thinking you have the wrong rom ???
You should have the latest UCLF6 for ATT if wanting ICS
full wipe and flash the link I'm gonna post for you, along with the correct baseband.
Stand by ...g
---------- Post added at 10:45 AM ---------- Previous post was at 10:41 AM ----------
http://d-h.st/Shk
Rom is UCLF6 rooted, pure stock .zip
---------- Post added at 10:49 AM ---------- Previous post was at 10:45 AM ----------
http://rootdev.org/i717/TU2/OTA/Apps/i717-ICS-UCLF6-Modem.zip
Here's the radio ...baseband
Flash both in CWM after "FULL" wipe ..
Hopefully that will help .....if not ...ugh
It would not be the first device failure, but lets try this first ....g
no Sim
I just went through the same thing had to take it to stock them wipe the flash data and sent it back for mechanical failure, got the new one overnight.
billwtsn said:
I just went through the same thing had to take it to stock them wipe the flash data and sent it back for mechanical failure, got the new one overnight.
Click to expand...
Click to collapse
Yes ....the Odin to stock method will repair the damage on occasion, but not always, as in the case of your device.
I'm hoping we get lucky on this one, but I'm not holding my breath.
OP ....I feel you should try the .zip method first, then Odin back second if it fails.
You may also have mechanical damage, but we need to exhaust our other options first ....g
The sim slot does fail occasionally, so get it stock and eliminate that.
*Used the search tool first - no joy*
Running CM10 Stable - current config:
UNLOCKED (HTD Dev)
S-ON
HBOOT-1.19.000
RADIO-1.12.11.0809
Since flashing CM10 this weekend, my mobile data has gone in the toilet. Network/"no connection" errors and gray bars way more often, despite not changing a thing about my radios. Weirdly, if I turn on wifi, it seems to improve my reception as well (as in, I'm not on a wifi network - just the act of switching on wifi somehow gooses network performance, but only a little.) I haven't done better than two blue bars since I did this, and I've only seen "4G" once. I used to get far better than that.
Checked Settings, everything seems fine. Thoughts? More data needed?
Try flashing back to sense and reprovision the phone
##786# menu/reset
Password is msl
om4 said:
Try flashing back to sense and reprovision the phone
##786# menu/reset
Password is msl
Click to expand...
Click to collapse
Thanks - do I need to re-lock as part of this, or simply flash Sense, re-provision, re-flash CM? Just want to keep this painless.
You don't relock
(n00bish question alert) Is there a way to re-flash Sense from a .zip with TWRP? Trying an ICS RUU executable linked elsewhere in this forum and I keep getting "Error 155". Will anything Sense-like work, or does it have to be stock?
Any sense-based rom will work...and you're exactly right: grab the zip and flash through twrp. Make sure to do a nandroid of your current rom first so you can restore after you're done.
Sent from my EVO LTE
Took me a while to find a ROM with a kernel installer (my sticking point) - MeanBean plus the reset did it. Thanks, gents.
takeout said:
Took me a while to find a ROM with a kernel installer (my sticking point) - MeanBean plus the reset did it. Thanks, gents.
Click to expand...
Click to collapse
Are you back on CM10 again withOUT network issues now? I loved CM10 but had the same issue and jumped on another ROM. Might wanna go back.
Like a dummy I think I deleted something I wasnt suppose to. I tried flashing artmod using philztouh recovery (latest). when I went to flash artmod it was giving me a status 7 installation fail and was talking about needing 5 args but only having 4. so I went back to the mounts/storage and started formating everything except the sdcard and sns but I formated /firmware and tried formatting /persist. Now my phone only boots a few roms IE>...CM 11 M4 and Mokee but the wifi is not turning on at all and there are no sim apn's....I cant use mobile data or wifi whatsoever...I have tried manually entering any apn's I can find to no avail. I should of never used philztouch when I have no idea what formatting /firmware would of actually done to the device....Im guessing I need to return to stock using LGPNT (which is another thing I hope the file itself isnt huge b/c I have a ****ty ass wifi connection that im pulling from air)...I have done just about everything I can possibly think about doing to include trying to restore TWRP roms I had previously back-uped.....Just sat on the vanir boot screen carbon rom doesnt boot whatsoever either nor do PACMan....Im now back with TWRP with efs/sdcard/KK support. I havent changed radios or anything....Can someone please give me a hand so I dont have anice shiny brick
I believe my phone has been N4 Converted...here is what bootloader tells me
Fastboot Mode
Product_Name-Mako
Variant-Make 16GB
HW version-rev-10
Bootloader version-MAKOZ10f
Baseband Version- N/A
Carrier Info- None
Serial Number - Im leaving this blank
Signing- Production
Secure Boot- Enabled
Lock State- Unlocked
jxcorex28 said:
I believe my phone has been N4 Converted...here is what bootloader tells me
Fastboot Mode
Product_Name-Mako
Variant-Make 16GB
HW version-rev-10
Bootloader version-MAKOZ10f
Baseband Version- N/A
Carrier Info- None
Serial Number - Im leaving this blank
Signing- Production
Secure Boot- Enabled
Lock State- Unlocked
Click to expand...
Click to collapse
I think that just means you have the mako bootloader. Mine says the same thing and I've never converted.
Have you tried restoring your efs partitions? You can if you have an old TWRP backup, or freegee, or they might be sitting on your sdcard.
Maybe flash the at&t jb radio after restoring efs.
brothaedhung said:
I think that just means you have the mako bootloader. Mine says the same thing and I've never converted.
Have you tried restoring your efs partitions? You can if you have an old TWRP backup, or freegee, or they might be sitting on your sdcard.
Maybe flash the at&t jb radio after restoring efs.
Click to expand...
Click to collapse
Ive looked into the EFS back up folder and I see three of em but how can I restore an efs ? I have an old back up of vanir but it never booted and I have two twrp back up's of carbon but they were failed back-ups....I really have no idea how any of this happened ? Its like the phone doesnt even recognize the sim card and wifi wont even turn on whatsoever (3 hours ago everything was working perfectly). It wasnt til I formatted /firmware with philztouch recovery that all of these problems occured....
well i tried finding a copy of the at&t jb radio on your rom thread but codefire.re has told me file not found on mozzila and chrome
.. thanked by mistake
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
Just use lgnpst to return to stock? If WiFi sucks, just calm down, go to a library tomorrow to download. Learn from this experience, ask questions before you try stuff, and you won't be in this situation again.
optimusv45 said:
.. thanked by mistake
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
Just use lgnpst to return to stock? If WiFi sucks, just calm down, go to a library tomorrow to download.
Click to expand...
Click to collapse
I dont think the file exists thru codefire.re anymore, unless something is messing up on my end...yeah about that LPGNST, Ive seen a few different threads about that ordeal and really not sure which one to follow...
http://forum.xda-developers.com/showthread.php?t=2230994 follow this, read carefully, this tells you everything you need to know. You need to understand the steps before you use it. Ask questions if unsure
yeah I followed that link but it doesnt seem to really be the problem Im having. My phone's not bricked (soft or hard bricked)....a few roms are having a hard time boot (which Im not sure why considering Ive completely wiped the entire phone)...Right now the phone's booting with cm11 M4...The only problem Im having is inability to connect to wife and missing apn list...the phone isnt recognizing the sim card...If I can grab that att jb radio and see if that's the culprit and it doesnt work...Ill give that link a try....Really not sure i the local library allows downloadable content or not...Might be just for surfting...B&N as well as Panera Bread all block downloads, purely net surfing only...
jxcorex28 said:
yeah I followed that link but it doesnt seem to really be the problem Im having. My phone's not bricked (soft or hard bricked)....a few roms are having a hard time boot (which Im not sure why considering Ive completely wiped the entire phone)...Right now the phone's booting with cm11 M4...The only problem Im having is inability to connect to wife and missing apn list...the phone isnt recognizing the sim card...If I can grab that att jb radio and see if that's the culprit and it doesnt work...Ill give that link a try....Really not sure i the local library allows downloadable content or not...Might be just for surfting...B&N as well as Panera Bread all block downloads, purely net surfing only...
Click to expand...
Click to collapse
If your phone doesn't even see the SIM card, it may be more than a radio issue. Your library don't give a **** what you download, they are paid too little to care.
optimusv45 said:
If your phone doesn't even see the SIM card, it may be more than a radio issue. Your library don't give a **** what you download, they are paid too little to care.
Click to expand...
Click to collapse
yeah that's what I was thinking as well....just gotta get the phone up and running, expecting calls and what not...Didnt expect all of this to happen....guess you gotta learn one way or another....if i could flash that radio tonight, reboot and see if that's been causing the problems..tomorrow id get started on that LG program...If used something similiar with the LG OpT about 5 years ago (different scenario)
jxcorex28 said:
yeah that's what I was thinking as well....just gotta get the phone up and running, expecting calls and what not...Didnt expect all of this to happen....guess you gotta learn one way or another....if i could flash that radio tonight, reboot and see if that's been causing the problems..tomorrow id get started on that LG program...If used something similiar with the LG OpT about 5 years ago (different scenario)
Click to expand...
Click to collapse
I updated the link in my thread. Should work now.
well sound doesnt work now, nor does voice commands or any type of voice anything....so voice, sound, wifi, data....all of this from formating /firmware using philztouch recovery....
brotha you the man....that fixed everything.....it's back up and running again....optimusv (thank you as well for the assistance)....I still dont know what made the phone act that way aftering formatting /firmware....kinda curious
I had a similar problem trying to install Art Mod rom on my LG OG using Philz touch CWM recovery!!! I switched to TWRP 2.6.3.0 and have not had any problems... Just something about the newer version that don't mingle well with the rom.. if I'm not mistaken CWM 6.0.3.8 works well with the rom also..
I had a problem just a few moments ago trying to use the efs supported/kk TWRP & also philztouch...PT recovery gave me a status 7 and kk supported TWRP gave me an error on mounting /system...I have not used CWM or official TWRP...I'd like to try artmod but I'm still hooked on xposed framework and cm ROMs
Sent from my LG-E970 using XDA Premium 4 mobile app
jxcorex28 said:
I had a problem just a few moments ago trying to use the efs supported/kk TWRP & also philztouch...PT recovery gave me a status 7 and kk supported TWRP gave me an error on mounting /system...I have not used CWM or official TWRP...I'd like to try artmod but I'm still hooked on xposed framework and cm ROMs
Sent from my LG-E970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What is an efs supported/kk twrp and phil... if you're using the right recovery l, flashing the right rom, and still encountering issues. I would recommend just lgnpst back to stock to have a fresh start since the process of going back to stock, rooting and installing recovery for this phone is quite simple
Recovery modified by brothedhung...I just used cwm 6.0.3.8 to try artmod. I wasn't to crazy about the stock experience. Switched back to pa beta...
Sent from my LG Optimus G using XDA Premium 4 mobile app