Hello everyone
I've flashed FXP146 CM9.1 on my Neo (MT15) and after that USB doesn't work. The phone will charge normally (except maybe it takes about 5secs to recognize it's charging) but when I plug to the computer it won't recognize there's a USB device connected (not even a bleep or a unknown hardware message) and the phone will charge but still no mass storage/MTP message. I've already:
- Enabed/disabed USB debug
- Rebooted the phone several times
- Wiped data / deleted cache/dalvik
- Reinstaled the ROM (I've also pushed FXP145 through WiFi ADB and installed it - obviously I couldn't flash a new kernel)
- Bought a new USB cable
- Plugged in another PC
There's the chance of phone's USB malfunctioning, but it would be a great coincidence it starts right after the kernel flashing/rom installing (both processes went ok, I've flashed through flashtool in less than 2secs without errors).
My question is: there's someone else with this problem? If that's the case has someone managed to fix it?
Thanks for your time
@edit
I've noticed the system is a bit laggish too, FXP145 was very smooth
I'm still the only one facing this issue?
Yup, it seems you're the only one.....
Maybe you can try and see if Windows device manager detects the device, in control panel....
Do you mean to say you can't connect even in flash mode/ fastboot mode?
" Always forgive your enemy, nothing will ever annoy him more. "
DeathCzar said:
Yup, it seems you're the only one.....
Maybe you can try and see if Windows device manager detects the device, in control panel....
Do you mean to say you can't connect even in flash mode/ fastboot mode?
Click to expand...
Click to collapse
Yes, when I try to enter flashmode/fastboot the led just flashes then turn off again and the phone starts to boot. I've checked Windows' device manager (in both PCs) and there's no new device there. I know it all points to hardware failure, it just seems hard to believe the perfect timing.
Try a different ROM, or download the same ROM again. Unlikely, but something may have been corrupted in the zip. Try the new JB ROMs. They're extremely fast and stable. Personal opinion of course
Jass5991 said:
Try a different ROM, or download the same ROM again. Unlikely, but something may have been corrupted in the zip. Try the new JB ROMs. They're extremely fast and stable. Personal opinion of course
Click to expand...
Click to collapse
Will the JB ROM work with ICS's kernel?
Roth_D said:
Will the JB ROM work with ICS's kernel?
Click to expand...
Click to collapse
Obviously not!
Sent from my MT11i using xda premium
Neo V not detected in PC
Hi. My Neo V is not getting detected in PC as a Drive. USB Mass Storage option is missing when I connect my phone to PC.
Using CM10 FXP148 ROM, Lupus Kernel.
Will this thing work with my phone?
http://forum.xda-developers.com/showpost.php?p=34956370&postcount=4174
Any help?
EDIT1: This works : http://forum.xda-developers.com/showpost.php?p=34956370&postcount=4174&nocache=1
EDIT2: This didn't work with CM10 FXP152 ROM, Lupus Kernel.
Same issue with my Xperia GO
I had CM9 running on my Xperia GO. I installed FXP 216 CM9 from FreeXperia project. Everything was running properly. USB drivers never posed any problem. Then I tried installing CM10 FXP225 and it was stuck on boot loop. So what I did was that I rebooted phone into fastboot and flashed CM9 boot.img. then installed and wiped data.
and then this problem occurred. My laptop (running on windows 7) won't recognize it anymore. I tried to uninstall and install drivers (even fastboot and flashboot ones) but still I am not able to get it recognized. I heard the CM10 FXP 226 has fix for bootloop and i am dying to try it on my phone, so if anyone can help, it would be a great help.
Thanks a lot in advance.
I had CM9 running on my Xperia GO. I installed FXP 216 CM9 from FreeXperia project. Everything was running properly. USB drivers never posed any problem. Then I tried installing CM10 FXP225 and it was stuck on boot loop. So what I did was that I rebooted phone into fastboot and flashed CM9 boot.img. then installed and wiped data. <br />
<br />
and then this problem occurred. My laptop (running on windows 7) won't recognize it anymore. I tried to uninstall and install drivers (even fastboot and flashboot ones) but still I am not able to get it recognized. I heard the CM10 FXP 226 has fix for bootloop and i am dying to try it on my phone, so if anyone can help, it would be a great help. <br />
<br />
<br />
Thanks a lot in advance.
Click to expand...
Click to collapse
You expect solutions for Xperia go problems from neo forum? come on mate post in correct forums....
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
You expect solutions for Xperia go problems from neo forum? come on mate post in correct forums....
Click to expand...
Click to collapse
xperia u, go users posting here that's funny ...
Related
Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Soulfl said:
Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Click to expand...
Click to collapse
Hi,
Somebody posted in Dooms thread yesterday with the same issue...
http://forum.xda-developers.com/showpost.php?p=17678186&postcount=580
read through the thread to see if he managed a fix or contact the member with a pm.
http://forum.xda-developers.com/showthread.php?t=1253853
i tried a full wipe with a wolfbreak 6.0.0g it started to install then i got a
E:Cant symlink /system/bin/dumpcrash
E:Failure at line 10:
systemling dumpstate SYSTEM:bindumpcrash
Install aborted.
Here try this ...
http://forum.xda-developers.com/showthread.php?p=9561575
Sent from my X10_AOSP using xda premium
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Soulfl said:
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Click to expand...
Click to collapse
Try this.....
http://forum.xda-developers.com/showpost.php?p=17690089&postcount=595
Mainly try the last part first.
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Soulfl said:
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Click to expand...
Click to collapse
What other kernels have you tried?
Can you use flashtool?
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Soulfl said:
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Click to expand...
Click to collapse
Flash this with xrecovery then see.
http://doomlord.sylvester20007.com/x10/x10_gb/dk/v04-FS/dk-v04-FS-modfxp_with_xrec.zip
You have bin amazing today but still no luck...
I saw that zip was v4 when i go into about phone it still says v5.
Thank you,
Sorry my mistake, you need to go back to stock kernel first, it is in one of Dooms thread somewhere, sorry i am not on pc now.
Sent from my X10_AOSP using xda premium
Thank you for the help today i will see what i can find to get back to stock kernal...
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Soulfl said:
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Click to expand...
Click to collapse
could your USB port be dammaged??? just a thought. maybe get a magnifying galss and have a look to make sure all the pins are ok.
Pvy.
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Soulfl said:
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Have you had any luck mate?
If not try these drivers on your pc and then connect your phone.
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
rotundo said:
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
Click to expand...
Click to collapse
Yes i thought my port was on its way out but tried a new cable and everything is fine now.
I don't think its my port but at the moment its ask I can think.
The drivers won't help my phone is not even sending the info to say a USB is plugged in.
Sent from my X10i using XDA App
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Reply
TheViperCE said:
Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Click to expand...
Click to collapse
Hmm, Interesting problem. Are you sure you have checked Your device manager when you turned off your phone and pressed Back button and USB connected? Like this thing shows?
View attachment 1129524
If not, either these two ways:
1)Download These ADB driver here for X10i and look how they installed. See is it solved?"
2)Are you sure how to use flashmode?? Power off button, don't connect your USB to computer yet. Then press and hold Back button and connect the USB to your PC. The green light will retain and screen will be black all the time
3)If not, Try reinstall SONY PCC / Or try email SONY
AND!!!! BEFORE You do anything like installing custom rom or stock rom from XDA here, your X10 must BE ROOTED my friend??Or not, custom roms cannot be installed into your phones? and The link you pasted methods only worked after you rooted your X10+r installed recovery.
AND, back to your problem. Sorry but No. for 2.3.3official X10, rooting must be done via flashtool. And it's considered MI5 for installing ROMs without rooting!! Plus, ICS roms or CM9 only can be flashed after your phone's bootloaded is unlocked..and of course after rooting!!
Hope this helps.
whitefang
Thank you very much on your reply whitefang! Your help is very much appreciated. Will try to test those things and will keep you posted ASAP.
Hi to all!
Since yesterday, my PC which is running W8 gave an error whenever i tried to connect my xperia mini to my PC. 'USB device not recognized'. I was running CM 10.1 and a new update was available so i tried to flash it. Flashed it successfully and then the network was gone so, what i did was flash back to CM 9.1. Here the problem occurred. My PC is not recognizing my phone. I tried flashing the kernel with flash tool and followed this :- http://forum.xda-developers.com/showthread.php?t=2095087 Still nothing. Connected it to another laptop running windows 8. Even that didn't work so i connected my phone to my dad's laptop running windows 7. I was somehow able to flash kernel at first but then the same error there too! Tried 3 different PC's and i'm not able to solve this issue! Please help!
as you have a custom kernel on device,try accessing CWM and installing the stock ROM,then install CM again..
btw did you check the CM10.1 page for any bugs..?
a|\|droid_user said:
as you have a kernel on device,access CWM and try installing the stock ROM,then install CWM again..
Click to expand...
Click to collapse
Tried 2 different ROM's on the same kernel. Nothing happens. I get the same error each time! Also now my ear-piece won't work too (In both the ROM's i flashed) :'(
I also noticed that using Win XP, i can connect MSC to my PC and copy/paste items. But as soon i go into fastboot mode, it gives me the error!
Edit: I have used CM 10.1 before with no bugs. This started happening only yesterday!
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Gamertroid said:
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Click to expand...
Click to collapse
I have everything installed! Right now i'm on XP. Even it doesn't recognize my phone in fastboot mode!
check device manager..
when you connect your xperia..what does it show ?
try updating the driver by manual selection...
if that doesnt work..
open flashtool..
check the logs when you connect your xperia..
-DELETE-
I somehow managed to connect it to flashhtool in flash mode! Now i'm flashing .42 ftf file to use my device somehow with 0 bugs/glitches. It is taking forever to do so! See the attachment!
Any other way to flash ftf file?
Thank you
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Is your computer detecting any other xperia device,or an iphone...?
check if your micro usb port is damaged...
Sent from my WT19i using xda app-developers app
ishanbhatnagr96 said:
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Click to expand...
Click to collapse
Goto flashtool/drivers/ and install drivers and check...
a|\|droid_user said:
Is your computer detecting any other xperia device,or an iphone...?
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
It is detecting my pendrive, my hard-drive and my nexus!
Edit: Tested on 3 laptops each running:- Win8 and other two Win7. Also, tested on 1 PC (dual-booted with XP and Win8) Same result in all of them.
Is SEUS detecting the phone?
Try changing connection modes on the phone...
if not..flash stock kernel
get me a screenshot of flashtool logs for check drivers option..
its here help->check drivers..
Solved (I guess)
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
Maybe its the prob with ports, others reported it not working with usb3.
Regards
-N
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
well,why dont try reinstalling your usb controller drivers to see if the front port is workin?...
otherwise if you are done with this problem...change the topic to RESOLVED..
I've been checking many roms for last few weeks. Installed stock based MIUI v4 by devswift1 yesterday. It's definitely unlike other roms. Sometimes it looks cheap but it has many added feature that makes it unique. But I faced a major problem. After flashing the Rom my windows 8 pc doesn't recognize the phone at all. Tough it make sound when I plug and unplug the phone but nothing shows on my computer. Any miui user here?
S.Nahid said:
I've been checking many roms for last few weeks. Installed stock based MIUI v4 by devswift1 yesterday. It's definitely unlike other roms. Sometimes it looks cheap but it has many added feature that makes it unique. But I faced a major problem. After flashing the Rom my windows 8 pc doesn't recognize the phone at all. Tough it make sound when I plug and unplug the phone but nothing shows on my computer. Any miui user here?
Click to expand...
Click to collapse
Google for Xperia u usb drivers... Ull find it... Download n install..
Sent from my ST27i using xda app-developers app
S.Nahid said:
I've been checking many roms for last few weeks. Installed stock based MIUI v4 by devswift1 yesterday. It's definitely unlike other roms. Sometimes it looks cheap but it has many added feature that makes it unique. But I faced a major problem. After flashing the Rom my windows 8 pc doesn't recognize the phone at all. Tough it make sound when I plug and unplug the phone but nothing shows on my computer. Any miui user here?
Click to expand...
Click to collapse
Try to change usb conectivity mode from MTP to MSC and MTP again. Or uninstall your old phone driver from device manager.
Nakulkhanna said:
Google for Xperia u usb drivers... Ull find it... Download n install..
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
Thanks so much but I think the drivers are properly installed cause as soon as I reflashed stock browser the pc found the phone instantly?
sihe said:
Try to change usb conectivity mode from MTP to MSC and MTP again. Or uninstall your old phone driver from device manager.
Click to expand...
Click to collapse
Where is the option MTP/MSC inn miui?
S.Nahid said:
Where is the option MTP/MSC inn miui?
Click to expand...
Click to collapse
Go to storage, then options key and select the usb computer connection!
Good luck