Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Soulfl said:
Hello,
I am a avid flasher and i ran into a problem today i pluged in my X10 into my computer and all it will do is charge.
I have tried 3 Different cable on 3 Different computers.
I am currently running wolfbreak v5.0.0c with doom v5 Dev.
I have tried loading and old backup of wolf v4 - Nothing
I have tried wiping data and re loading wolf v5 - Nothing
I have tried using SEUS - Nothing
I have tried Flash Tools - Nothing
Its like my phone does not see the data steam and only sees the power any ideas?
Thanks,
Soulflyz
Click to expand...
Click to collapse
Hi,
Somebody posted in Dooms thread yesterday with the same issue...
http://forum.xda-developers.com/showpost.php?p=17678186&postcount=580
read through the thread to see if he managed a fix or contact the member with a pm.
http://forum.xda-developers.com/showthread.php?t=1253853
i tried a full wipe with a wolfbreak 6.0.0g it started to install then i got a
E:Cant symlink /system/bin/dumpcrash
E:Failure at line 10:
systemling dumpstate SYSTEM:bindumpcrash
Install aborted.
Here try this ...
http://forum.xda-developers.com/showthread.php?p=9561575
Sent from my X10_AOSP using xda premium
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Soulfl said:
Thank you for trying but another miss...
Still no go...
I wish i had more ideas
Click to expand...
Click to collapse
Try this.....
http://forum.xda-developers.com/showpost.php?p=17690089&postcount=595
Mainly try the last part first.
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Soulfl said:
thank you again but no go...
I tried with no luck,
The memory card mounts into the phone fine and i can use xrec.
What i cant do is when i plug the usb into the computer it does nothing.
All i get is a marker that says charging.
I have even bin able to install through xrec, wolf v4, v5, and currently running v6 with no usb support to flash tif files, SEUS, or transfer stuff on any of them.
Click to expand...
Click to collapse
What other kernels have you tried?
Can you use flashtool?
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Soulfl said:
im on dooms unlocked boot loader so i cant connect through usb to try a new one... (the only way to try a new one is with a tif file right?)
Thanks,
Click to expand...
Click to collapse
Flash this with xrecovery then see.
http://doomlord.sylvester20007.com/x10/x10_gb/dk/v04-FS/dk-v04-FS-modfxp_with_xrec.zip
You have bin amazing today but still no luck...
I saw that zip was v4 when i go into about phone it still says v5.
Thank you,
Sorry my mistake, you need to go back to stock kernel first, it is in one of Dooms thread somewhere, sorry i am not on pc now.
Sent from my X10_AOSP using xda premium
Thank you for the help today i will see what i can find to get back to stock kernal...
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Soulfl said:
I will be away from the computer for the next few days so i will re open this thread then...
After 8 hours of looking i could not get my phone to connect through usb to flash or manage files.
I think i have narrowed it down to the kernal but i may be wrong.
I am running doomkernal unlocked so without flashing the kernal i have no clue how to fix this since i cant connect through usb.
Click to expand...
Click to collapse
could your USB port be dammaged??? just a thought. maybe get a magnifying galss and have a look to make sure all the pins are ok.
Pvy.
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Soulfl said:
I thought that so I pulled it all apart and the sodder points are all still good.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Have you had any luck mate?
If not try these drivers on your pc and then connect your phone.
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
rotundo said:
yeah my USB port is going too it sucks. Need to be soooo careful when flashing new kernels now or I may brick it as it's unlocked
If I don't have the wire in just a certain way it senses nothing, and the cable is able to like wiggle around in there like the connection is getting loose. Bad times
Click to expand...
Click to collapse
Yes i thought my port was on its way out but tried a new cable and everything is fine now.
I don't think its my port but at the moment its ask I can think.
The drivers won't help my phone is not even sending the info to say a USB is plugged in.
Sent from my X10i using XDA App
Related
Hi
I have a very annoying problem:
My phone no longer registers when I plugin the usb-cable. It doesn't ask whether to go into usb-mode nor does it display that usb debugging is on. It is only possible to charge it and not to sync data.
Therefore I'd like to flash it back to a stock rom so I can get it repaired under the warranty. And since SEUS can't find my phone when it is connected, I need to find another way to do so.
So is it possible?
have u tried flashtool yet?
its under the development section
Sent from XDA Premium from my X10a rooted running 2.3.2 gingerbread rom from rdannar
Have the same problem, i went to sony they said it hardware problem.
Sent from my X10i using XDA App
Have you tried the PC companion repair function. Its saved me a few times.
Sent from my X10i using XDA App
seus/pc companion more or less the same... seus just for update pcc can do bavkup and others not neccesary stuffs
use flashtool if u dun wan seus but i recommand seus for 100% ori stock
Sent from my X10i
Come on guys learn to read! He say that his usb not can connect how in hell could he use seus or anything else that requires usb connection? Sorry that I not can help you.
Sent from my ARCified X10i with CM 7.0 RC1 2.3.3 Gingerbread
If it still able to charging... then u still have the chance for flashing....
whitezboon said:
If it still able to charging... then u still have the chance for flashing....
Click to expand...
Click to collapse
nopp charging and data goes in different cables.
Sent from my ARCified X10i with CM 7.0 RC1 2.3.3 Gingerbread
Have you first tried the following :-
1) Different usb ports some laptops and desktops have front/side usb ports so try a rear one
2) Different usb cable (if its the charge/usb cable that came with the phone it could be damaged or the wires bent/cracked due to over use plugging into charge and then using it as a data cable
3) Different PC just incase something is wrong with your own (corrupt driver etc)
I would try these things before you start if it will connect but only charge I'm guessing that the cable is maby broken
you could also try staring the X10i in safe mode power off power on and soon as it vibrates hold the down part of the volume button and keep holding this down until the phone boots up
This will give you a pretty basic mode (safe mode) with stock applications running no market downloads etc and then try connecting your usb cable up see if it works then ... you could have a rogue application that uses the usb for sync function like a media player etc!?
Wow, rude much. I was offering a solution that worked for me when I was having an identical issue. Because I was able to charge, flash mode still worked. Also, as stated above, changing USB ports can help. No need to get snarky
Sent from my X10i using XDA App
JimmyX10 is right, however..
The phone is ONLY able to charge over USB.. No flashing capabilities so far..
I've tried SEUS and the flashtool..
I've also tried:
3 different USB cables (also tested okay on my Optimus X2)
3 different computers
And a bunch of different USB ports..
BUMP
Does anyone have any good ideas?
Yes you can flash your rom without PC....
1-hope ur fone is rooted
2-xRecovery installed
3-Search dev section for stock rom xRecovery installation or request to upload the same for U..
4-transfer the xrecovery .zip file to ur card by card reader.
5-flash it through xRecovery...
I believe it will solve ur prob....
Try this guide:
http://forum.xda-developers.com/showthread.php?t=1054818
i think theres no problem as long as you got your phone rooted and have the stock rom stored in your computer. then you can transfer the rom to your phone via an sd card reader. lastly install it using xrecovery. problem solved
Long story short - was running WB v3.9.0 Gingerbread on my x10, worked flawlessly... until my usb cable stopped working. Went out and bought a new one... Charged phone for 2 hours fine, tried to plug into PC to update to WB v4.0... PC didn't recognize my phone...
Tried downloading new drivers etc.. nothing worked. So i rebooted phone:
Surprise Surprise! SD Card is unmountable!
rebooted into xrecovery and did a factory reset/wipe of everything.
then tried to restore my backed up rom.... SD card unavailable...
Tried to manually mount sdcard, didn't work
Tried formating SD card - no luck there!
Now i'm stuck with NO ROM, no way to plug my phone into my computer to download a ROM, a constant bootloop with no firmware and a crappy replacement nokia...
Any help would be MUCH appreciated! (other than taking it in to repair) I don't know if my warranty will cover this much destruction...
EDIT: called up my service provider (3 australia) and they immediately agreed (to my utter delight and complete surprise) to swap my handset for a brand new HTC Desire HD...
It's a shame i'm now leaving the x10 forums - i really did love the phone, but for an offer like this i don't think many people would refuse the trade.
Thanks everyone for your help and input and see you (or not) on the Desire HD forums
Looks grim... you might be out of luck...
Sent from my X10i using XDA Premium App
Frosty666 said:
Looks grim... you might be out of luck...
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
especially the nokia replacement eh?
What version of xrecovery are you using?? Is the latest one which is gingerbread fix? The version that is not fix for gingerbread have that problem with mounting sd card. So try the latest from here: http://forum.xda-developers.com/showthread.php?t=859571&highlight=xrecovery
Another question: did you try with flash tool? maybe in flash mode your phone will be recognized.
try to put your SD card into a card reader and copy the existing data to your computer.
then format the SD card with Panasonic SD Formatter - I can't include the URL as I'm a new member. Just google it.
After formatting the SD card, put all data you copied to your PC back on the SD card and try again.
Maybe it works, I had a similar problem and could fix it as detailed.
if not...phew...good question...
can you get in flash mode? well if you can then reflash using SEUS
and search for drivers in forums.
did u try the flashtool to flash it bak to 2.1 SE rom ? i faced the same problems like u b4..
if u stil can access into xrecovery , u can try this
http://forum.xda-developers.com/showthread.php?t=1054818
nipun123 said:
can you get in flash mode? well if you can then reflash using SEUS
and search for drivers in forums.
Click to expand...
Click to collapse
nickymy said:
did u try the flashtool to flash it bak to 2.1 SE rom ? i faced the same problems like u b4..
if u stil can access into xrecovery , u can try this
http://forum.xda-developers.com/showthread.php?t=1054818
Click to expand...
Click to collapse
It connects in flash mode, but my computer doesn't read the usb connection in order to flash... neither does any other computer :S
actually i still don understand wat u mean by pc cant read the connection... when u start to flash ur phone bak to 2.1 SE generic rom, ur phone should be having a green light led right ? is the flashmode aborted at the half way bak or totally there is no connection at all?
sorry for asking so much, bcoz i faced this problem b4..i would like to help u too...
Hey, I also had same problem with my sd card. I couldn't mount it via xrecovery also The solution is very very simple You just have to buy a sd card reader. It coasts less than 1 euro. You will have to format your sd card, then copy someones zip with ROM and your phone is repaired
I'm stuck in the same boat. When I lug my phone in it says " USB Device not recognized." In device manager on my computer it says, "The USB device attached to this computer has malfunctioned, and Windows doesnt recognize it."
the phone goes into flash mode but the phone is not recognized in flashtool!
vpllover said:
I'm stuck in the same boat. When I lug my phone in it says " USB Device not recognized." In device manager on my computer it says, "The USB device attached to this computer has malfunctioned, and Windows doesnt recognize it."
the phone goes into flash mode but the phone is not recognized in flashtool!
Click to expand...
Click to collapse
So then try seus repair
SEUS wont recognize the phone!!
u might want to try the phone on a differrent cpu /laptop and run flashtool again.
Some cpus just dont want to detect. I have a few cpus i know,i do all the stuff on my win7 laptop cos its the one that does not give me any problem. one thing the laptop is original win7 64bit,the rest of the cpu is pirated xp,maybe thats why.
try it .
tried it on 2 different PCs, same frikkin error!
Have you downloaded the latest USB drivers and latest sues. My phone could not be found till I did that.
Kieron
Sent from my X10i using XDA Premium App
nickymy said:
actually i still don understand wat u mean by pc cant read the connection... when u start to flash ur phone bak to 2.1 SE generic rom, ur phone should be having a green light led right ? is the flashmode aborted at the half way bak or totally there is no connection at all?
sorry for asking so much, bcoz i faced this problem b4..i would like to help u too...
Click to expand...
Click to collapse
My problem is getting the computer to even recognize that the phone is plugged in. It's not even giving me a message saying 'device not recognize', it's totally ignoring it. Therefore i can't use SEUS to reflash the phone as when i plug in my phone in flashmode it doesn't read it.
As for formatting my sd card - that's not the problem... i have 2 sd cards (one brand new that i bought as a spare) and i tried both and neither of them worked - something seems to have happened to the actual hardware of the phone
I'm taking it in to repair tomorrow - this is the second x10 that's done this... maybe it's my computer?
kieronw3 said:
Have you downloaded the latest USB drivers and latest sues. My phone could not be found till I did that.
Kieron
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Also - i can't find a link to the drivers on the forums anywhere - but i honestly doubt that's the problem - the phone was working 100% yesterday.
This may be out of the box but have you tried looking at the USBSTOR in your registry?
I had a problem before that my phone is not being detected by my laptop because of that. Just set it to 3 to enable it.
are u sure the cable you bought is a data cable not a charging only cable? Maybe the cable had a defect? also if the cable that went bad is the stock one see if the tip if bent. if the tip is bent try to make it straight.
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
My problem is that my phone rooted with Revolutionary Hboot 1.4 stopped being recognized by my computers on multiple ROMs and stock kernel along with Chads #9....when I connect it no audible noise sayings its connected, doesent show up in device manager, no notifications on pull down on the phone nothing....I cant connect adb cause it doesnt recognize the phone even when I go into fastboot etc I get nothing. Ive searched and searched and found people with similar problems with no real solution but Ive tried it all from removing reinstalling drivers changing ROMS wiping SD card and formatting phone until eyes bleed and 4 different usb cords. Once during several hours I did get the pop up asking what I wanted to do but it wouldnt connect or give the audible warning. Could it be a hardware problem? Should I try going to stock?
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
neopolotin75 said:
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
Click to expand...
Click to collapse
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I thought about putting the ruu.zip and flashing it back to stock but would I be able to mount my phone at that time to relock then re-root? I mean it works great except for not being able to mount it and do any adb stuff. Thanks Ill update the title
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
laie1472 said:
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
No I havent.....How would that affect it if it wont mount when the phone is booted? I cant get it to connect in fastboot either.....is it possible that the data pins where its plugged in could be bad? Isnt it like 2 are for charging and other 2 are for data or something?
Have you tried mounting it when in recovery?
Have you tried using a different port, or a different computer?
I would try flashing a different recovery (twrp or 4ext) and try mounting the USB device through the recovery options, if that doesn't work, I would say it could be a bad port.
A recovery can effect if your able to connect to your pc. But if your trying to get your issue solved try flashing a different recovery to see if will help.
#Root-Hack_Mod*Always\
I'll try a different recovery.... I'm using 4ext and I can't mount in recovery either...
Sent from my PG86100 using Tapatalk 2
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
RocketScience @ SDX said:
4. If that still doesn't work, try PDAnet http://junefabrics.com/android/ Once you have that installed, click "all programs", click (or right click depending on your OS) "Install Legacy USB drivers". Then plug your phone in to complete installation.
5. From the thread here:
http://community.sprint.com/baw/thread/75020
HTML:
Quote (selected)
The other is that the phone may be setup for the diagnostic modem mode
that store technicians use to triage the phone. You can access the menu to
change this by typing ##8778# in the dialer.
The top "UART" setting should be on MODEM, and the bottom "USB" setting
should be on "PDA" for regular operation. As technicians we normally change
this setting back, but there is always a chance someone forgot it when
finishing up a phone.
6. http://www.techspot.com/vb/topic145884.html#post875300 THIS JUST SAVED ME! My transform said it was connected but my computer didn't "see" it. After doing this, just reconnect. If you have any questions about this method, just ask me.
7. If all this fails, try another computer, os, usb port, or usb cord.
If you cannot get the phone to connect, you can use adb to push, pull, etc. files. For example, to push, you would install the sdk and set it up (google it). Then put a file, such as browser.apk in the platform-tools directory. Click run, type cmd. Cd to your platform-tools directory. Type adb devices to see your phone plugged in. Then type "adb push browser.apk /sdcard" to put the apk on your sd card. I think there is a adb wireless app somewhere too so you can even skip the cable.
Here is a list of compatible usb cords that have been shown to work:
This is the one i use... its retractable and a little short but it works perfectly http://www.amazon.com/Micro-Retract...3?s=electronics&ie=UTF8&qid=1310868486&sr=1-3
The cable that comes with an evo.
Lg cord that comes with the optimus.
StarTech 1ft. cable http://amzn.com/B002L5ZEYY
Blackberry Curve cable.
Another Blackberry cable.
Tripp Lite cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812120629
Click to expand...
Click to collapse
Note: I've seen as many as 10 USB cords not work before one did.
mpgrimm2 said:
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
Note: I've seen as many as 10 USB cords not work before one did.
Click to expand...
Click to collapse
Well I've tried the 8778 which I guess doesn't work but I only found 3282 & 3424 diagnostic codes and didn't see anything there in regards to that post. I tried the other app but it was a no go. I am going to flash another recover later tonight and see how that goes. It's just weird that NOTHING connects in any mode and can't do adb. It's like the driver or something on the phone isn't communicating in anymode
Sent from my PG86100 using Tapatalk 2
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
jslim38 said:
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
Click to expand...
Click to collapse
That's what I'm using now and it doesn't work :-(
Sent from my PG86100 using Tapatalk 2
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
neopolotin75 said:
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
Click to expand...
Click to collapse
hate to say it time for a trip to sprint
evo bryan said:
hate to say it time for a trip to sprint
Click to expand...
Click to collapse
Yea thats how its looking....I mean the phone works flawlessly.....I just hate not being able to figure out why its acting flakey with the usb. lol
hey there, u are not alone ;-) i got the same problem - absoute NO REACTION of PC when i plug phone, just the orange led for connection at the phone, but also no reaction by phone when i plug...
most of the time i use airdoird, so atm it is not that big deal...but i just want that it works!
can you plzzz post another recovery as i faced the same problme
when connect to pc it charge only and cant mount sd to pc etcc..plzzzzzzzzzzz
it sounds almost impossible to do anything to your since tgeres no way of getting you computer to recognize your evo. Phone hardware does go bad eventually. This is most likely a hardware issue and no debugging or command typing is going to fix it. Your only options are to go have it serviced. Not though sprint of course. They won't even touch it. If you know somebody you could take it to them and have it looked at to see what's going on and find a fix with it. I had a fairly similar problem with my acer tablet, Couldnt get data to mount, tried all the solutions with no success. Then I tried typing commands to rewrite the data table nodes associated with the data partition. With no success either. The partition was bad. Back to my point, hardware does go bad. Hopefully you can get someone to fix it.
Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
TheDarkTemptation said:
Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
Click to expand...
Click to collapse
1st make sure which one is the problem, is it from the phone or from the pc. have u try to put the cable in other usb port on your pc?
Try to re-flash your rom once again. If that is not working too, reboot your phone in cwm. make sure the cable is connected between your phone and the pc, then select mount and usb in cwm. select mount usb. see if this working for you.
<-----If i helped u
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
TheDarkTemptation said:
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
Click to expand...
Click to collapse
Does it charge when the USB cable is plugged in? E.g. does the phone state that it is recharging?
If in Windows, check if the device manager (Start Button > Right-click on Computer > Properties > Device Manager) still detects 'something' on the USB port, if you see a yellow exclamation mark, perhaps reinstall the drivers for your phone. (Flashtool comes with drivers IIRC). In any case, it might be worth a try to run SEUS with the phone disconnected, then it'll offer a 'repair' option, after which you must select your type of phone and connect it, hopefully the tool does not rely on the same driver. This would flash stock rom and stock kernel to your phone.
Should this fail, if your battery and WiFi still work, perhaps you can engineer a solution that downloads a new ROM over WiFi. You could upload it to your Google drive and download through the app or just use the internet browser. Then use a file manager like Root Explorer to move the files to the correct location on the SD-Card. Boot it into CWM and flash the new ROM and see if it helps.
Is the stock SE cable???, have you tried with another cable???
I have the same problem with the SE cable, my phone don't connect correctly with my PC, it disconnects automatically or never work...
Actually I'm using a Samsung cable for use the phone with my PC and works perfectly.
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Problem mounting usb on cm9 3.0.3
ponext said:
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Click to expand...
Click to collapse
I have a similar issue with CM9....Everything was working fine untill 2 days ago the USB no longer mounts!! I can charge my phone but can mount the sd card..Tried reflashing the kernel,the rom and stuff its not working...Any help would be appreciated!!
:crying:
Thanks for all those answers but it doesn't work at all... I even buyed an official version of windows and a new usb cable, downloaded a new rom (XPM V.13) and tried to mount via CWM but that doesn't work! And I think I'll have to wait till November to get a new phone. FML.
Tried through a different computer?
speedsys said:
Tried through a different computer?
Click to expand...
Click to collapse
Already tried... 6 times.
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
x10man said:
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
Click to expand...
Click to collapse
Thanks X10man, I've checked the inside of my X10 MP and the USB port is ****ed up. Gotta wait till november for a Xperia S Or a HTC. FML Again.