My problem is that my phone rooted with Revolutionary Hboot 1.4 stopped being recognized by my computers on multiple ROMs and stock kernel along with Chads #9....when I connect it no audible noise sayings its connected, doesent show up in device manager, no notifications on pull down on the phone nothing....I cant connect adb cause it doesnt recognize the phone even when I go into fastboot etc I get nothing. Ive searched and searched and found people with similar problems with no real solution but Ive tried it all from removing reinstalling drivers changing ROMS wiping SD card and formatting phone until eyes bleed and 4 different usb cords. Once during several hours I did get the pop up asking what I wanted to do but it wouldnt connect or give the audible warning. Could it be a hardware problem? Should I try going to stock?
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
neopolotin75 said:
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
Click to expand...
Click to collapse
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I thought about putting the ruu.zip and flashing it back to stock but would I be able to mount my phone at that time to relock then re-root? I mean it works great except for not being able to mount it and do any adb stuff. Thanks Ill update the title
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
laie1472 said:
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
No I havent.....How would that affect it if it wont mount when the phone is booted? I cant get it to connect in fastboot either.....is it possible that the data pins where its plugged in could be bad? Isnt it like 2 are for charging and other 2 are for data or something?
Have you tried mounting it when in recovery?
Have you tried using a different port, or a different computer?
I would try flashing a different recovery (twrp or 4ext) and try mounting the USB device through the recovery options, if that doesn't work, I would say it could be a bad port.
A recovery can effect if your able to connect to your pc. But if your trying to get your issue solved try flashing a different recovery to see if will help.
#Root-Hack_Mod*Always\
I'll try a different recovery.... I'm using 4ext and I can't mount in recovery either...
Sent from my PG86100 using Tapatalk 2
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
RocketScience @ SDX said:
4. If that still doesn't work, try PDAnet http://junefabrics.com/android/ Once you have that installed, click "all programs", click (or right click depending on your OS) "Install Legacy USB drivers". Then plug your phone in to complete installation.
5. From the thread here:
http://community.sprint.com/baw/thread/75020
HTML:
Quote (selected)
The other is that the phone may be setup for the diagnostic modem mode
that store technicians use to triage the phone. You can access the menu to
change this by typing ##8778# in the dialer.
The top "UART" setting should be on MODEM, and the bottom "USB" setting
should be on "PDA" for regular operation. As technicians we normally change
this setting back, but there is always a chance someone forgot it when
finishing up a phone.
6. http://www.techspot.com/vb/topic145884.html#post875300 THIS JUST SAVED ME! My transform said it was connected but my computer didn't "see" it. After doing this, just reconnect. If you have any questions about this method, just ask me.
7. If all this fails, try another computer, os, usb port, or usb cord.
If you cannot get the phone to connect, you can use adb to push, pull, etc. files. For example, to push, you would install the sdk and set it up (google it). Then put a file, such as browser.apk in the platform-tools directory. Click run, type cmd. Cd to your platform-tools directory. Type adb devices to see your phone plugged in. Then type "adb push browser.apk /sdcard" to put the apk on your sd card. I think there is a adb wireless app somewhere too so you can even skip the cable.
Here is a list of compatible usb cords that have been shown to work:
This is the one i use... its retractable and a little short but it works perfectly http://www.amazon.com/Micro-Retract...3?s=electronics&ie=UTF8&qid=1310868486&sr=1-3
The cable that comes with an evo.
Lg cord that comes with the optimus.
StarTech 1ft. cable http://amzn.com/B002L5ZEYY
Blackberry Curve cable.
Another Blackberry cable.
Tripp Lite cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812120629
Click to expand...
Click to collapse
Note: I've seen as many as 10 USB cords not work before one did.
mpgrimm2 said:
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
Note: I've seen as many as 10 USB cords not work before one did.
Click to expand...
Click to collapse
Well I've tried the 8778 which I guess doesn't work but I only found 3282 & 3424 diagnostic codes and didn't see anything there in regards to that post. I tried the other app but it was a no go. I am going to flash another recover later tonight and see how that goes. It's just weird that NOTHING connects in any mode and can't do adb. It's like the driver or something on the phone isn't communicating in anymode
Sent from my PG86100 using Tapatalk 2
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
jslim38 said:
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
Click to expand...
Click to collapse
That's what I'm using now and it doesn't work :-(
Sent from my PG86100 using Tapatalk 2
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
neopolotin75 said:
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
Click to expand...
Click to collapse
hate to say it time for a trip to sprint
evo bryan said:
hate to say it time for a trip to sprint
Click to expand...
Click to collapse
Yea thats how its looking....I mean the phone works flawlessly.....I just hate not being able to figure out why its acting flakey with the usb. lol
hey there, u are not alone ;-) i got the same problem - absoute NO REACTION of PC when i plug phone, just the orange led for connection at the phone, but also no reaction by phone when i plug...
most of the time i use airdoird, so atm it is not that big deal...but i just want that it works!
can you plzzz post another recovery as i faced the same problme
when connect to pc it charge only and cant mount sd to pc etcc..plzzzzzzzzzzz
it sounds almost impossible to do anything to your since tgeres no way of getting you computer to recognize your evo. Phone hardware does go bad eventually. This is most likely a hardware issue and no debugging or command typing is going to fix it. Your only options are to go have it serviced. Not though sprint of course. They won't even touch it. If you know somebody you could take it to them and have it looked at to see what's going on and find a fix with it. I had a fairly similar problem with my acer tablet, Couldnt get data to mount, tried all the solutions with no success. Then I tried typing commands to rewrite the data table nodes associated with the data partition. With no success either. The partition was bad. Back to my point, hardware does go bad. Hopefully you can get someone to fix it.
Related
I had adb set up before I flashed the stock kernel using HTC sync, but now it doesn't seem to want to work. How can I get HTC sync to work again so that I'm able to use adb once more?
abctilly said:
I had adb set up before I flashed the stock kernel using HTC sync, but now it doesn't seem to want to work. How can I get HTC sync to work again so that I'm able to use adb once more?
Click to expand...
Click to collapse
try reinstalling the driver or if you haven't done so installing lol
http://www.multiupload.com/2OFYWZFCCR
if anything try another usb slot. I noticed one of my usb slot shows like the SD and phone but then it won't be detected on ADB whereas my other usb slot does.
Teo032 said:
try reinstalling the driver or if you haven't done so installing lol
http://www.multiupload.com/2OFYWZFCCR
if anything try another usb slot. I noticed one of my usb slot shows like the SD and phone but then it won't be detected on ADB whereas my other usb slot does.
Click to expand...
Click to collapse
I've tried installing the drivers before, but it just doesn't open anything when I click on the zip file. I'll try my other 3 ports
Edit: Wow... the usb slot furthest away from me actually worked... can't believe I didn't try it yet lol. Thanks!
abctilly said:
I've tried installing the drivers before, but it just doesn't open anything when I click on the zip file. I'll try my other 3 ports
Edit: Wow... the usb slot furthest away from me actually worked... can't believe I didn't try it yet lol. Thanks!
Click to expand...
Click to collapse
the link i posted isn't the manual zip file. I posted the exe file that would automatically install the drivers in for plug and play use. But if your usb slow works then you have the drivers. I would suggest using USBdeview and uninstalling everything that has like HTC in it because it sounds like your other usb slots have a bad install when you connected your phone. It takes awhile for the drivers to install when you connect your phone.
Ok ,so heres my problem:
My S3 (i9300) wont connect to my computer which is running windows 7. I plug it in, and there is no sound for a device connected, no confirmation, and all the gs3 does is charge. it doesnt even show the little usb symbol at the top on the status bar. i've also tried two different cables, two computers, and ive cleaned the usb port on the phone.
This is all pretty recent as well. it used to connect fine on stock and the same on cm9, but one day when i plugged it in, it said unrecognized device, and from then on, the computer doesnt even know its connected anymore. i restored back to my original stock backup that had worked fine before, but still no progress. Kies has been uninstalled and reinstalled multiple times and so have the drivers for samsung phones..
Download, extract and install, then try again
Sent from my GT-I9300 using xda premium
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
http://db.tt/TSzlg0lI
Sent from my GT-I9300 using xda premium
Nope, no luck
Sent from my GT-I9300 using xda app-developers app
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
SPLucas26 said:
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
da.trute said:
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
Click to expand...
Click to collapse
I'm reinstalling KIES right now and ill try it with two different usb cables. If neither work, then ill try uninstalling the usb controller as you said and then go through the process once more. ill get back to you on it all when I'm done.
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Simonetti2011 said:
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
since this option is really quick to try, ill do that right now.
As for the cable I'm using, the one that I've been trying the most is the one that would work before i started having these issues. The other cable that i have is the one that came with my phone.
leeznon said:
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Click to expand...
Click to collapse
The only problems with that are: 1) My phone is rooted and 2) That might take a while... what im bascially trying to do now is get it to work with my pc so that i have the possibility of unrooting and putting my music on it directly through the cable, rather than removing my microsd and having to put that into an sd adapter.
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
mmurphmsu said:
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
Click to expand...
Click to collapse
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
SPLucas26 said:
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
Click to expand...
Click to collapse
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
I had the same problem before, I used a different charger and it worked.. idk what it was
Well right now I am on Stock TW that is rooted and I can get into my phone via Windows Explorer. But if I was to put Clock work Mod back on it seems to not want to connect anymore. So it seems CWM is doing something weird.
I'm gonna install TWRP instead of CWM and see if that makes a difference.
mmurphmsu said:
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
Click to expand...
Click to collapse
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
SPLucas26 said:
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
Click to expand...
Click to collapse
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
mmurphmsu said:
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
Click to expand...
Click to collapse
My issue ended up being an app I had installed, Triangle Away. I uninstalled and rebooted and had my USB connection back.
Well, so far, all I've gotten it a "usb cable connected" notification when trying yet another cable. Although i got this notfication, i still couldnt see any of the files on it from my pc, so it basically wasn't really connected. Im not sure what to do from here.
My ultimate goal would be to be able to unroot it so that if i needed to send it in or whatever, then i could without worry. As a side question, is there anyway to unroot it without a pc?
I have a note 2 rooted and on jellybean rom. I never took any update. My phone won't boot up or get into recovery. I can get into download mode but I can't get Odin to work. I've tried different USB ports and cables (have not tried different computers yet). When I plug in cable and phone to pc or outlet it gets stuck on the battery logo and circle. When I try to get into recovery it displays Samsung name off and on. I'm trying Odin back to stock but like I said it won't see my phone when connected. I will get a new cable ASAP to see if that makes a difference. I have pulled battery sim and sd several times to no avail. I will leave them out for the night and try again tomorrow. Anyone else have any suggestions? Thanks ! I really appreciate it !
Sent from my iPhone using Tapatalk 2
looks like you've gone through most of the steps. Have you tried reinstalling the samsung drivers? Plug it in and let it charge for a few hours? Maybe the battery is too low.
Thanks for your suggestion! I have reinstalled the drivers and restarted PC already. Last night I left battery sim and sd card out but today I will leave it charged for a few hours to see if it changes. I have also ordered an new OEM charger and battery to see if that helps. I am currently transferring all files and programs for returning it to stock to my sd card so I can try it on a different PC. I will keep you posted as to my progress. Thank you so much for your help!!
Sent from my iPhone using Tapatalk
download mode
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
jcody03 said:
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
Click to expand...
Click to collapse
I'm unfamiliar with the steps I need to take to do adb. I've only used Odin but to update my progress or lack thereof, I am still unable to get Odin (either version) to communicate with my phone when it is connected. I have tried both my pcs (they worked in the past). I have tried different USB cables and ports. Do you know the steps I need to take to use adb? I will google it and see what I find. I will update soon. Thanks again for your help!
Sent from my iPhone using Tapatalk 2
download mode
cnotes2019 said:
I'm unfamiliar with the steps I need to take to do adb. I've only used Odin but to update my progress or lack thereof, I am still unable to get Odin (either version) to communicate with my phone when it is connected. I have tried both my pcs (they worked in the past). I have tried different USB cables and ports. Do you know the steps I need to take to use adb? I will google it and see what I find. I will update soon. Thanks again for your help!
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
If you phone will not connect with your computer in download mode as well as recovery mode. I do not think there is much you can do other then see if you can get it replaced. I had have run into an issue like this before. Once I was able to get into download mode and push out the stock recovery onto the phone. But if it will not go into download mode as well there is not much I think you can do.
It will go into download mode. When connected to the pc Odin won't see it. Do you think using adb would be pointless at this point? I have not used a new USB cable so I wanted to wait at least for that to arrive along with an OEM battery I ordered to see if that helps any or is that pointless as well? Also does it matter where you store Odin on your pc ? (Internal vs on a sd card? Thanks for your help ! I may just need to send it in but wanted to try everything I could come up with.
download mode
cnotes2019 said:
It will go into download mode. When connected to the pc Odin won't see it. Do you think using adb would be pointless at this point? I have not used a new USB cable so I wanted to wait at least for that to arrive along with an OEM battery I ordered to see if that helps any or is that pointless as well? Also does it matter where you store Odin on your pc ? (Internal vs on a sd card? Thanks for your help ! I may just need to send it in but wanted to try everything I could come up with.
Click to expand...
Click to collapse
I would first try the new cable and but it into download mode and try to push the pit file that is here: http://forum.xda-developers.com/showthread.php?t=2024207
I would try to follow the un-root section I know there is a lot of issue with the note 2 and updates or unrooting where it will not find the recovery because when you use Cause it moves the location of it. This might help. good luck.
I have my new battery. Just waiting on the cables
Sent from my iPhone using Tapatalk
Sounds, Like a bad EMMC, If Your Phone doesn't get in to recovery and if it wont get recognized by Odin. Try updating the drivers, than Try Flashing back to the First firmware that came with the note II which is 4.1.1 So Try it, If it doesn't work like that, than it's indeed a bad EMMC on the board. Good luck my Friend!
osnu1008 said:
Sounds, Like a bad EMMC, If Your Phone doesn't get in to recovery and if it wont get recognized by Odin. Try updating the drivers, than Try Flashing back to the First firmware that came with the note II which is 4.1.1 So Try it, If it doesn't work like that, than it's indeed a bad EMMC on the board. Good luck my Friend!
Click to expand...
Click to collapse
Thanks for the suggestion! I'm already on 4.1.1. I've never updated my note 2. I have updated drivers (although I can't find it in device manager but I've indeed downloaded it via my pc not via phone/ cable) I'm hoping its not a had EMMC because I don't know what that is but it sounds like that would make it a hardware issue correct? I'm hoping its just bad cables (I have old cables) and a bad battery (I still have the original battery on moderate to heavy usage) but recently became second device when I got note 3 (just in time lol)
Edit: is it still necessary to flash 4.1.1 if I'm already on it ? Thanks again!
Sent from my iPhone using Tapatalk 2
Can anyone point me in the right direction in using adb to fix my issue? Thanks !
Sent from my iPhone using Tapatalk 2
I give up. It's truly dead. Tried new battery and charger to see if I can flash stock or recovery no luck. ill send it in for repair or sell as is on eBay. Blah this bites.
Sent from my iPhone using Tapatalk 2
Try using different USB ports on your computer! I had same problem, Odin didn't show phone connected So I just tried different USB ports and one of the three ports showed connected Give it a shot and hope it helps!
Sent from my SCH-I605 using xda app-developers app
[ QUOTE=Goody68;48435738]Try using different USB ports on your computer! I had same problem, Odin didn't show phone connected So I just tried different USB ports and one of the three ports showed connected Give it a shot and hope it helps!
Sent from my SCH-I605 using xda app-developers app[/QUOTE]
Sadly I've tried different ports and 3 different computers with no luck. Idk if ADB would be any different if my computer can't see the connection with the phone. I'll just get another or get a different phone smh. Thanks for the help !
Sent from my iPhone using Tapatalk
One last thing, did you make sure your USB debugging was checked?
Sent from my SCH-I605 using xda app-developers app
USB debugging on my phone? If you mean that then my phone is dead so I can't check but it was prior to my phone dying on me.
Sent from my iPhone using Tapatalk
jcody03 said:
Hello,
I see that you state you can not get into recovery mode, But can you get it into download mode. If so you maybe able to use adb and push the pit file to it and then install the stock rom again.
Click to expand...
Click to collapse
I am unable to locate genuine resources on where to download ADB files and how to use it. Would you happen to know where I can find them ? Thanks !
Sent from my iPhone using Tapatalk
hey there. So I have an AT&T X+ and I'm currently on Elegancia 5.2 I believe. I was wondering if I should just go back to stock and wait for the OTA 4.2.2 update, or flash the newest Elegancia ROM? But, I kinda have a handicap:
My phone doesn't connect to my PC or any PC at all. So if I'm going to flash a Rom I gotta put it on drop box and transfer it etc. I will NOT be able to flash a boot.img because of this either. I've tried the app Flashify, and it says it isn't compatible with my device. So if any of these roms have a custom boot.img I probably won't be able to use it.
Another thing. I feel like I know what the problem is with my device. It says that USB storage is unavailable at all times. Even when it is plugged in. If anyone knows a fix for this please don't be afraid to speak up.
Thanks guys!
Sent from my HTC One X+
Bump...Advice anyone?
Sent from my HTC One X+
poojiggles7 said:
Bump...Advice anyone?
Sent from my HTC One X+
Click to expand...
Click to collapse
What so u mean by the Phone wont connect.....
Its shows as USB device Unrecognized like this
or
The PC wont recognize ur Phone how is it...??????(like the ADB or fastboot wont show ur device)
[email protected] said:
What so u mean by the Phone wont connect.....
Its shows as USB device Unrecognized like this
or
The PC wont recognize ur Phone how is it...??????(like the ADB or fastboot wont show ur device)
Click to expand...
Click to collapse
the phone doesnt even appear as a USB device. nothing pops up, it makes no sound when it connects, nothing, just charges.
poojiggles7 said:
the phone doesnt even appear as a USB device. nothing pops up, it makes no sound when it connects, nothing, just charges.
Click to expand...
Click to collapse
Did u try Installing proper drivers and android-sdk-windows........????
To start with the Latest drivers and the ADB setup should be proper and even after that if that doesn't show then....
Open device Manager in Windows an see whether atleast it has been shown as Unknown device or something there.....
I tried all that and nothing. I've had this problem for the past month and every bit of troubleshooting I've done with ATT, HTC and xda hasn't worked. In the photo attached, my phone is plugged in to the PC and it still says usb storage unavailable.
Sent from my HTC One X+
poojiggles7 said:
I tried all that and nothing. I've had this problem for the past month and every bit of troubleshooting I've done with ATT, HTC and xda hasn't worked. In the photo attached, my phone is plugged in to the PC and it still says usb storage unavailable.
Sent from my HTC One X+
Click to expand...
Click to collapse
I dont think thats the issue at all...
If I am not wrong I remember its was the same with my phone also...(WITH all HOX+)
the Problem is AFAIK is the HTC drivers .....
Uninstall all the drivers u had installed and try this
and check whether the phone is recognized....
[email protected] said:
I dont think thats the issue at all...
If I am not wrong I remember its was the same with my phone also...(WITH all HOX+)
the Problem is AFAIK is the HTC drivers .....
Uninstall all the drivers u had installed and try this
and check whether the phone is recognized....
Click to expand...
Click to collapse
alright ill give that a shot...should i try the link you gave, or the link for the newer version?
poojiggles7 said:
alright ill give that a shot...should i try the link you gave, or the link for the newer version?
Click to expand...
Click to collapse
Try the Latest version I couldnt find the proper one for you sorry.....
[email protected] said:
Try the Latest version I couldnt find the proper one for you sorry.....
Click to expand...
Click to collapse
I tried it and nothing happened. I executed the driver .exes and downloaded the correct zip for my PC, and still no progress...
i had something like this on my hox, try to connect it in different modes (recovery, hboot, FASTBOOT) and type "adb devices" mby it will find it
Hmm.. I've had this problem too... Try using a different USB cable, (imo) samsung cables work perfectly
Sent from my GT-S5360 using xda app-developers app
I have all drivers and have tried several remedies but still no luck. Can anyone help, perhaps over teamviewer? If anyone can fix my problem with connecting and updating my rom, I will compensate them for their time.
What Operating System are you using?
What drivers have you installed?
HTC Sync?
PdaNet?
Did you install adb and fastboot or full sdk?
What are you getting at the prompt when you enter fastboot devices while in fastboot from the fastboot directory on your pc with the firmware in that same location?
Your issue is with installing the firmware,.... right?
Sent from my HTC6525LVW using Tapatalk
Windows 7 64bit
HTC Sync says no phones are attached
I do have debugging mode on as well. At the least it does show "USB connected" on the new kitkat rom, but still nothing on the computer.
I tried pdanet+ as well with no luck but I'll try again with this new rom. I'll report back tomorrow.
PDANet+ doesn't work either. My phone says USB connected, but when I remove the USB, it still says connected.
I don't know what's wrong and I'm hoping you could help me out via Teamviewer. I've already sent you my Hangouts details so we can talk faster.
Thanks!
I couldn't find a way to turn usb debugging on in the 4.09 ota. I can't adb to my phone when it's fully booted into the system, but if I boot into bootloader and plug the phone in I'm able to get fastboot to recognize it in fastboot usb mode (adb still doesn't work though). Not sure if this helps, but that was my experience and the only way I was able to install twrp so I could root after the OTA (I'm unlocked and s-off).
Sent from my HTC6435LVW using Tapatalk
USB debugging can be activated by unlocking the Developer Options menu by going into About > Software information > More > tap repeatedly on Build number.
Obvious question, but someone had to ask, you try a different USB cable? That one could be going bad. One of my cables cannot do data transfer but can charge the phone, while my other one works. Also, did you try a different device with that specific cable? Have you tried a different USB port? Those can go out as well.
Sent from my HTC6435LVW using xda app-developers app
Uzephi said:
Obvious question, but someone had to ask, you try a different USB cable? That one could be going bad. One of my cables cannot do data transfer but can charge the phone, while my other one works. Also, did you try a different device with that specific cable? Have you tried a different USB port? Those can go out as well.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I have tried multiple cables and computers.
terrorist96 said:
I have tried multiple cables and computers.
Click to expand...
Click to collapse
I think at this point, this may be your best bet:
Flash my stock rooted full odex Jellybean rom.
Use Flashify to flash the stock recovery I posted in the same thread, since your fastboot isn't working for whatever reason.
Then you can just take the OTA, which will update your firmware.
Then you can flash the stock rooted version of the rom, or whatever rom you choose...
Good luck! Sorry our Teamviewer session was of no use.