hey there. So I have an AT&T X+ and I'm currently on Elegancia 5.2 I believe. I was wondering if I should just go back to stock and wait for the OTA 4.2.2 update, or flash the newest Elegancia ROM? But, I kinda have a handicap:
My phone doesn't connect to my PC or any PC at all. So if I'm going to flash a Rom I gotta put it on drop box and transfer it etc. I will NOT be able to flash a boot.img because of this either. I've tried the app Flashify, and it says it isn't compatible with my device. So if any of these roms have a custom boot.img I probably won't be able to use it.
Another thing. I feel like I know what the problem is with my device. It says that USB storage is unavailable at all times. Even when it is plugged in. If anyone knows a fix for this please don't be afraid to speak up.
Thanks guys!
Sent from my HTC One X+
Bump...Advice anyone?
Sent from my HTC One X+
poojiggles7 said:
Bump...Advice anyone?
Sent from my HTC One X+
Click to expand...
Click to collapse
What so u mean by the Phone wont connect.....
Its shows as USB device Unrecognized like this
or
The PC wont recognize ur Phone how is it...??????(like the ADB or fastboot wont show ur device)
[email protected] said:
What so u mean by the Phone wont connect.....
Its shows as USB device Unrecognized like this
or
The PC wont recognize ur Phone how is it...??????(like the ADB or fastboot wont show ur device)
Click to expand...
Click to collapse
the phone doesnt even appear as a USB device. nothing pops up, it makes no sound when it connects, nothing, just charges.
poojiggles7 said:
the phone doesnt even appear as a USB device. nothing pops up, it makes no sound when it connects, nothing, just charges.
Click to expand...
Click to collapse
Did u try Installing proper drivers and android-sdk-windows........????
To start with the Latest drivers and the ADB setup should be proper and even after that if that doesn't show then....
Open device Manager in Windows an see whether atleast it has been shown as Unknown device or something there.....
I tried all that and nothing. I've had this problem for the past month and every bit of troubleshooting I've done with ATT, HTC and xda hasn't worked. In the photo attached, my phone is plugged in to the PC and it still says usb storage unavailable.
Sent from my HTC One X+
poojiggles7 said:
I tried all that and nothing. I've had this problem for the past month and every bit of troubleshooting I've done with ATT, HTC and xda hasn't worked. In the photo attached, my phone is plugged in to the PC and it still says usb storage unavailable.
Sent from my HTC One X+
Click to expand...
Click to collapse
I dont think thats the issue at all...
If I am not wrong I remember its was the same with my phone also...(WITH all HOX+)
the Problem is AFAIK is the HTC drivers .....
Uninstall all the drivers u had installed and try this
and check whether the phone is recognized....
[email protected] said:
I dont think thats the issue at all...
If I am not wrong I remember its was the same with my phone also...(WITH all HOX+)
the Problem is AFAIK is the HTC drivers .....
Uninstall all the drivers u had installed and try this
and check whether the phone is recognized....
Click to expand...
Click to collapse
alright ill give that a shot...should i try the link you gave, or the link for the newer version?
poojiggles7 said:
alright ill give that a shot...should i try the link you gave, or the link for the newer version?
Click to expand...
Click to collapse
Try the Latest version I couldnt find the proper one for you sorry.....
[email protected] said:
Try the Latest version I couldnt find the proper one for you sorry.....
Click to expand...
Click to collapse
I tried it and nothing happened. I executed the driver .exes and downloaded the correct zip for my PC, and still no progress...
i had something like this on my hox, try to connect it in different modes (recovery, hboot, FASTBOOT) and type "adb devices" mby it will find it
Hmm.. I've had this problem too... Try using a different USB cable, (imo) samsung cables work perfectly
Sent from my GT-S5360 using xda app-developers app
Related
So I been trying to use the Sideload Wonder Machine for my Xperia x10 and for some reason the SWM is not recognizing my phone is just doesn't display the device number, I'm pretty sure I have the right drivers I don't know what else to do ? I am getting so frustrated help? why wouldnt SWM reconigze my phone? but the computer does
I had a problem at first and I reinstalled the drivers a couple of times and also used ADB directly and it started working. It's definitely driver and ADB related.
Also, be sure you have debugging turned on in the phone. Once you get it working it should work from that point on.
naplesbill said:
I had a problem at first and I reinstalled the drivers a couple of times and also used ADB directly and it started working. It's definitely driver and ADB related.
Also, be sure you have debugging turned on in the phone. Once you get it working it should work from that point on.
Click to expand...
Click to collapse
Yea I have the debbuging on , and sorry for been so slow lol but mmm I did the same thing unistall and reinstall and it just doesnt work, but what do you mean by the ADB directly? I think thats the one I am using, I mean isnt that the one when you plug your usb cable for the first time it installs itself?
Ladiablae said:
Yea I have the debbuging on , and sorry fo:r been so slow lol but mmm I did the same thing unistall and reinstall and it just doesnt work, but what do you mean by the ADB directly? I think thats the one I am using, I mean isnt that the one when you plug your usb cable for the first time it installs itself?
Click to expand...
Click to collapse
Exact same situation here. Looking forward to the solution.
charlyee said:
Exact same situation here. Looking forward to the solution.
Click to expand...
Click to collapse
Yeah i read your other post, I think it has something to do with the phone, have you try installing and reinstalling the drivers? I have try everything , is getting me upset lol
Ladiablae said:
Yeah i read your other post, I think it has something to do with the phone, have you try installing and reinstalling the drivers? I have try everything , is getting me upset lol
Click to expand...
Click to collapse
Yes I did a few times and no luck.
I read that the Captivate had the same problem and one fix was installing generic Samsung drivers, I am not finding any such thing for Sony. I am convinced it is a driver problem.
charlyee said:
Yes I did a few times and no luck.
I read that the Captivate had the same problem and one fix was installing generic Samsung drivers, I am not finding any such thing for Sony. I am convinced it is a driver problem.
Click to expand...
Click to collapse
Yeah I think so too, I been looking for more drivers and I cant find any.
Have you guys tried killing the PC Companion process (the one that runs on startup) and then trying to reinstall the drivers?
No i have not..but i unistall and reinstall the drivers a lot of times already. I am even lookin for different drivers but they all the same ..or when I try to update it it says that it has the right driver already. I can't think of anything else. I guess. Would never be able to use it
Sent from my X10a using XDA App
I am pretty sure I closed it out, but I will check again.
Thanks.
Same issue with me but doesn't work.
@naplebill - How do you use ADB directly?
Sent from my X10a using XDA App
sopdogg said:
Same issue with me but doesn't work.
@naplebill - How do you use ADB directly?
Sent from my X10a using XDA App
Click to expand...
Click to collapse
You need to download the Android SDK. Once that is setup, ADB is located in the installed folder under the tools folder.
This is a DOS command interface. You will need to run CMD and then from the tools directory type:
ADB shell
This should show the following:
* daemon not running. starting it now *
* daemon started successfully *
If your device is recognized it will show it there as well, if not the last line will be this:
error: device not found
When I download the sdk i need to only installed for the 1.6 version right? I dont need to installed all that crap? Or should i install everythin? I know u hate me am so annoyinnn lol. But am a girl and slow for this kind of things : )
Sent from my X10a using XDA App
Ladiablae said:
When I download the sdk i need to only installed for the 1.6 version right? I dont need to installed all that crap? Or should i install everythin? I know u hate me am so annoyinnn lol. But am a girl and slow for this kind of things : )
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Don't worry, I've been employed in IT for 20 years. It's not because you are a girl, it's because you just don't have the xperience (see what I did there? Lol).
You can just install 1.6, it doesn't matter because you aren't going to use that part of it.
Ohh that's why u know so much about this .... lucky u ...well and about my problem with the swm ..it just doesnt work ...but im tired of tryin everythin so i am gonna wait for the update of 2.1 ..i think with the update would work ....well i hope so hehe
Sent from my X10a using XDA App
Ladiablae said:
Ohh that's why u know so much about this .... lucky u ...well and about my problem with the swm ..it just doesnt work ...but im tired of tryin everythin so i am gonna wait for the update of 2.1 ..i think with the update would work ....well i hope so hehe
Sent from my X10a using XDA App
Click to expand...
Click to collapse
If you decide you can't wait or if it still has issues after the update, I can probably walk you through getting it working via chat or a phone call.
It is definitely an issue with the driver not working with ADB properly. Also, are you killing the process PCCompanion.exe? You can kill this process using Task Manager and clicking on the Processes tab.
Ok, so I've been going back and forth with this too. I had it working, installed SEUS, then it wasn't working, did a system restore, and started over. It was working again. I formatted my phone and noticed it wasn't working again. This is what I did to make it work:
1)Completely uninstall the PC Companion. It's virtually useless now anyway
2)With the phone connected go into the device manager (right click my computer-->Manage and select device manager), and uninstall the device driver windows shows for the phone. As soon as you do that unplug the phone.
3)Go into the C:\Windows\System32 folder and delete these three files (if they are there):
WdfCoInstaller01007.dll
WinUSBCoInstaller.dll
WUDFUpdate_01007.dll
4)If you had the android sdk already just delete the entire folder and download the latest version from here: http://dl.google.com/android/android-sdk_r07-windows.zip
5)Install the packages shown in the attached pic. You only need the 1.6 files and a couple of other packages.
6)Once you get all of this done, plug in your phone with debugging turned on and you should be good to go.
Ladiablae said:
When I download the sdk i need to only installed for the 1.6 version right?
Click to expand...
Click to collapse
See my sig.
Thanks so much SPIDERTECH !! Everything works now!
@Jmercy09 you're quite welcome. I may have to do this again myself. My computer is now, again, not seeing the phone
I actually had to redo these steps and was back up and running. I found the best way to test this after doing the steps is by using the android screencast (attached). If screencast runs and shows your screen, it worked. If it doesn't, then it obviously didn't work as screencast has to see the phone in the same way SWM has to see it.
My problem is that my phone rooted with Revolutionary Hboot 1.4 stopped being recognized by my computers on multiple ROMs and stock kernel along with Chads #9....when I connect it no audible noise sayings its connected, doesent show up in device manager, no notifications on pull down on the phone nothing....I cant connect adb cause it doesnt recognize the phone even when I go into fastboot etc I get nothing. Ive searched and searched and found people with similar problems with no real solution but Ive tried it all from removing reinstalling drivers changing ROMS wiping SD card and formatting phone until eyes bleed and 4 different usb cords. Once during several hours I did get the pop up asking what I wanted to do but it wouldnt connect or give the audible warning. Could it be a hardware problem? Should I try going to stock?
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Are u possibly on MeanRom maybe 3.7 or so and anthrax Rls 8 beta 2 or 3.
If so; you may have chad0989's "fast charge" script on & preventing usb stuff from working. One of my last 10th posts in MeanRom has details on what to change or u could move to Mr 3.92 where the script is disabled by default.
Edit: I must be tired and didn't read your post correctly & doubt this is your issue. Is usb debugging enabled? (shouldnt matter with fasrboot). Did u uninstall all the HTC drivers/sync etc, & reinstall just the driver (see revolutionary.io for just the driver).
Here's a thread for the.Transform, but steps 4 & up may be able to help u if the driver reinstall doesn't:
How to get PC to recognize phone.
http://forum.sdx-developers.com/index.php?topic=17432.msg217703.msg#217703
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
neopolotin75 said:
Yea I have checked and unchecked it, installed removed installed and reinstalled and went to revolutionary website. I cant get it to recognize the phone at all....I plug it in and all it will do is charge....even if I change default connection to usb
Click to expand...
Click to collapse
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Well, u can see if some.of Rocketscience's sdx thread helps. Another option is to put the Ruu.zip on the phone & flash.stock (but u can't relock can u?).
You should list your current setup/root status in your op.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yea I thought about putting the ruu.zip and flashing it back to stock but would I be able to mount my phone at that time to relock then re-root? I mean it works great except for not being able to mount it and do any adb stuff. Thanks Ill update the title
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
laie1472 said:
Have you tried flashing a different recovery to see if it will help any ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
No I havent.....How would that affect it if it wont mount when the phone is booted? I cant get it to connect in fastboot either.....is it possible that the data pins where its plugged in could be bad? Isnt it like 2 are for charging and other 2 are for data or something?
Have you tried mounting it when in recovery?
Have you tried using a different port, or a different computer?
I would try flashing a different recovery (twrp or 4ext) and try mounting the USB device through the recovery options, if that doesn't work, I would say it could be a bad port.
A recovery can effect if your able to connect to your pc. But if your trying to get your issue solved try flashing a different recovery to see if will help.
#Root-Hack_Mod*Always\
I'll try a different recovery.... I'm using 4ext and I can't mount in recovery either...
Sent from my PG86100 using Tapatalk 2
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
RocketScience @ SDX said:
4. If that still doesn't work, try PDAnet http://junefabrics.com/android/ Once you have that installed, click "all programs", click (or right click depending on your OS) "Install Legacy USB drivers". Then plug your phone in to complete installation.
5. From the thread here:
http://community.sprint.com/baw/thread/75020
HTML:
Quote (selected)
The other is that the phone may be setup for the diagnostic modem mode
that store technicians use to triage the phone. You can access the menu to
change this by typing ##8778# in the dialer.
The top "UART" setting should be on MODEM, and the bottom "USB" setting
should be on "PDA" for regular operation. As technicians we normally change
this setting back, but there is always a chance someone forgot it when
finishing up a phone.
6. http://www.techspot.com/vb/topic145884.html#post875300 THIS JUST SAVED ME! My transform said it was connected but my computer didn't "see" it. After doing this, just reconnect. If you have any questions about this method, just ask me.
7. If all this fails, try another computer, os, usb port, or usb cord.
If you cannot get the phone to connect, you can use adb to push, pull, etc. files. For example, to push, you would install the sdk and set it up (google it). Then put a file, such as browser.apk in the platform-tools directory. Click run, type cmd. Cd to your platform-tools directory. Type adb devices to see your phone plugged in. Then type "adb push browser.apk /sdcard" to put the apk on your sd card. I think there is a adb wireless app somewhere too so you can even skip the cable.
Here is a list of compatible usb cords that have been shown to work:
This is the one i use... its retractable and a little short but it works perfectly http://www.amazon.com/Micro-Retract...3?s=electronics&ie=UTF8&qid=1310868486&sr=1-3
The cable that comes with an evo.
Lg cord that comes with the optimus.
StarTech 1ft. cable http://amzn.com/B002L5ZEYY
Blackberry Curve cable.
Another Blackberry cable.
Tripp Lite cable http://www.newegg.com/Product/Product.aspx?Item=N82E16812120629
Click to expand...
Click to collapse
Note: I've seen as many as 10 USB cords not work before one did.
mpgrimm2 said:
Did you ever try the suggestions from RocketScience's thread?
How to get PC to recognize phone
Note: I've seen as many as 10 USB cords not work before one did.
Click to expand...
Click to collapse
Well I've tried the 8778 which I guess doesn't work but I only found 3282 & 3424 diagnostic codes and didn't see anything there in regards to that post. I tried the other app but it was a no go. I am going to flash another recover later tonight and see how that goes. It's just weird that NOTHING connects in any mode and can't do adb. It's like the driver or something on the phone isn't communicating in anymode
Sent from my PG86100 using Tapatalk 2
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
jslim38 said:
Try using 4ext as your custom recovery this will fix it
Sent From my EVO 3D x515m s off using xda premium
Click to expand...
Click to collapse
That's what I'm using now and it doesn't work :-(
Sent from my PG86100 using Tapatalk 2
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
neopolotin75 said:
So Ive flashed CWM, Twrp and 4ext and changed Roms...still no connection for usb inside the rom, cant mount in recovery and cont connect in bootloader. Abd wont find my device and oh yea bought a new cable (4th cable) no go........suggestions?
Click to expand...
Click to collapse
hate to say it time for a trip to sprint
evo bryan said:
hate to say it time for a trip to sprint
Click to expand...
Click to collapse
Yea thats how its looking....I mean the phone works flawlessly.....I just hate not being able to figure out why its acting flakey with the usb. lol
hey there, u are not alone ;-) i got the same problem - absoute NO REACTION of PC when i plug phone, just the orange led for connection at the phone, but also no reaction by phone when i plug...
most of the time i use airdoird, so atm it is not that big deal...but i just want that it works!
can you plzzz post another recovery as i faced the same problme
when connect to pc it charge only and cant mount sd to pc etcc..plzzzzzzzzzzz
it sounds almost impossible to do anything to your since tgeres no way of getting you computer to recognize your evo. Phone hardware does go bad eventually. This is most likely a hardware issue and no debugging or command typing is going to fix it. Your only options are to go have it serviced. Not though sprint of course. They won't even touch it. If you know somebody you could take it to them and have it looked at to see what's going on and find a fix with it. I had a fairly similar problem with my acer tablet, Couldnt get data to mount, tried all the solutions with no success. Then I tried typing commands to rewrite the data table nodes associated with the data partition. With no success either. The partition was bad. Back to my point, hardware does go bad. Hopefully you can get someone to fix it.
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
hey everyone, so ive have went thru all the threads i can find, done alot of research and have come up short. seems like alot of the users with the Verizon I605 Samsung Note 2 have the same problem, not connecting to their PC's.
-ive restarted both my note 2 and my PC numerous times.
-ive installed/uninstalled/re-installed the official Samsung website device drivers
-tried other USB ports
-tried up to 4 different USB/Mini USB cords
-made sure USB debugging was switched on
-Tried Samsung Kies, come to find out it doesn't support the I605 Note 2
-called Verizon and Samsung directly and both actually offered me a position as a tech after i told them all the things i did to figure it out, because it was way more then they could handle.
i know it has connected before, as i have done it once or twice a few weeks back but now it wont connect, drivers fail to install, and nothing else works. i have also tried every other method mentioned in the other threads. nothing has worked.
is there any fix for this? was it cause by the latest update?
im running 4.1.2/ VRAMC3
and im using Windows 7
please anyone lmk if there is a fix for this. ive exhausted all avenues known to me. thanks in advance.
Happened to me too, it's USB port in your computer. If you have any other computer or laptop try using that.
You can also try wireless connection for file transfer.
Sent from my SPH-L710 using xda premium
Hope you found your answer. If not have this moved. This was posted in the sprint version of the note 2 forums.
Sent from my SPH-L900 using Tapatalk 2
The appropriate forum would probably be more helpful.
Plus, are you getting any error messages? I've had issues with connecting the Sprint GN2. If I install the Samsung Drivers, I get a "Missing Hardware ID" error. I just found it's better not to install drivers. Let Windows install what drivers it can. Not all the drivers will install and will get an error message about device not successfully installed. But enough install that the GN2 will connect so you can move files around for MTP. See a thread I did back in December, linky
Also, you can try out SG Flash Drive Enabler. I've tried it out. It works pretty well. It has quirks, but does allow you to use your SDHC card as a flash drive. You have to use the MTP to access the phone's storage.
oh man...*face palm* sorry about posting in the wrong forum guys, i was about to crash and i didn't even realize. my mad.
MODS: please move this to the correct Forum section at your earliest convenience, thanks :silly:
i have found that airdroid does work for wifi file transfers for such things as pictures, music...etc. but im wanting to root my note 2 and it needs a direct line from the phone to the pc to work.
ill check out those links posted up and see what how it goes. but we still need a fix for this. kinda lame only (well most) the verizon SN2 is having this problem.
flip06 said:
...im wanting to root my note 2 and it needs a direct line from the phone to the pc to work....
Click to expand...
Click to collapse
You may want to use ToolKit. I believe it's setup for AT&T tool. Uninstall KIES and all the samsung driver on the your PC. Choose to have ToolKit install the drivers. It should get your enough connection for ADB to work and be able to root and install a custom recovery. I had to use it a couple days ago to get a custom recovery back on the GN2 and I was getting the Missing Hardware ID error and still worked.
lovekeiiy said:
You may want to use ToolKit. I believe it's setup for AT&T tool. Uninstall KIES and all the samsung driver on the your PC. Choose to have ToolKit install the drivers. It should get your enough connection for ADB to work and be able to root and install a custom recovery. I had to use it a couple days ago to get a custom recovery back on the GN2 and I was getting the Missing Hardware ID error and still worked.
Click to expand...
Click to collapse
Ive done that very process. Uninstalled kies and installed the toolkit drives. Some reason it would sort of connect but then disconnect. Never stayed on and wasnt able to be picked up as connected on the Odin program.
flip06 said:
Ive done that very process. Uninstalled kies and installed the toolkit drives. Some reason it would sort of connect but then disconnect. Never stayed on and wasnt able to be picked up as connected on the Odin program.
Click to expand...
Click to collapse
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
PuffJr2 said:
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
Click to expand...
Click to collapse
That's what I did to fox it as well
Sent from my SCH-I605 using xda app-developers app
PuffJr2 said:
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
Click to expand...
Click to collapse
where did you go on windows 7 to turn off the above mentioned? the middle part confuses me a bit. so your saying you turned off the windows feature to look for driver updates when the phone is connected via USB?
if you dont mind, please walk me thru your process. thanks in advance.
flip06 said:
where did you go on windows 7 to turn off the above mentioned? the middle part confuses me a bit. so your saying you turned off the windows feature to look for driver updates when the phone is connected via USB?
if you dont mind, please walk me thru your process. thanks in advance.
Click to expand...
Click to collapse
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
I was just abput to refer this link to him. you beat me too it! loljooo
shangrila500 said:
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
thank you so much for the link. but still no dice. i uninstalled the drivers i had before, did your method, and then downloaded the drivers again from the toolkit. i still dont get a serial number in the toolkit showing the drivers are good to go, and the phone still doesn't connect.
WHAT THE DEUCE?!
flip06 said:
thank you so much for the link. but still no dice. i uninstalled the drivers i had before, did your method, and then downloaded the drivers again from the toolkit. i still dont get a serial number in the toolkit showing the drivers are good to go, and the phone still doesn't connect.
WHAT THE DEUCE?!
Click to expand...
Click to collapse
Do you have Kies installed? I have to have Kies installed along with the other drivers to use Casual, Odin, or any of the other tools
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Do you have Kies installed? I have to have Kies installed along with the other drivers to use Casual, Odin, or any of the other tools
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Kies was un-installed per instuctions on the toolbox. i guess i could try and re-install it and retry everything.
EDIT: just remembered that Kies dosnt support the Verizon Note 2....lame sauce.
Source: https://community.verizonwireless.com/message/966503
i am going to try to download a older driver that was working before and see if that works. its linked near the bottom of the above posted link in one of the replies. ill come back with results.
ok so i downloaded the samsung drivers version 1.4.6.0 and followed the directions on the link i provided above. the drivers installed successfully, but the CASUAL(R515b) No You Verizon! program doesn't seem to see the phone connected to the computer. and just continually loops. sigh...this is getting to get stupid. such a simple task yet its not connecting.
EDIT: the drivers SAY they have installed successfully, but the computer still doesn't recognize the phone is connected. even reads on the phone that the software wasnt found to connect to the computers, and the CASUAL program also tells me that the phone isnt connected....sigh...seriously....WTF.
When you install your driver's on your pc you need to restart your pc...have you tryed that?
Sent from my Enormous note 2
flip06 said:
Kies was un-installed per instuctions on the toolbox. i guess i could try and re-install it and retry everything.
EDIT: just remembered that Kies dosnt support the Verizon Note 2....lame sauce.
Source: https://community.verizonwireless.com/message/966503
i am going to try to download a older driver that was working before and see if that works. its linked near the bottom of the above posted link in one of the replies. ill come back with results.
Click to expand...
Click to collapse
While Kies does not officially support the VZW Note 2 it is the only way me and my friends can get our PCs to see our Note 2s, that's the only reason I ask and it is usually par for course. Its what's suggested in these cases if it isn't already installed. It can hurt to give it a shot and see if it helps anything, if not you can just uninstall it again.
Also check out the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2304481
And if that doesn't help you can always try the code in the last post of this page and see if it works:
http://forum.xda-developers.com/showthread.php?t=2033870&page=2
Sent from my SCH-I605 using XDA Premium HD app
mr pnut said:
When you install your driver's on your pc you need to restart your pc...have you tryed that?
Sent from my Enormous note 2
Click to expand...
Click to collapse
yup tried that.
shangrila500 said:
While Kies does not officially support the VZW Note 2 it is the only way me and my friends can get our PCs to see our Note 2s, that's the only reason I ask and it is usually par for course. Its what's suggested in these cases if it isn't already installed. It can hurt to give it a shot and see if it helps anything, if not you can just uninstall it again.
Also check out the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2304481
And if that doesn't help you can always try the code in the last post of this page and see if it works:
http://forum.xda-developers.com/showthread.php?t=2033870&page=2
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
ive redownloaded it, so ill give it another try. are you saying just have it downloaded and then do nothing with it? or do you somehow get it to connect? i mean just having it as a presents on the computer to have something else connect seems odd to me but hell im down for whatever at this point. ima load it up now and try.
a day after i rooted and flashed a rom on my l9, it just died, idk how. can't get into any kind of "mode". the strange thing is when i connect is via usb it tries to connect but a dialog box comes up in the bottom right saying "USB device not recognized" it makes the connect/disconnect sound over and over until i unplug it. Device manager doesn't show anything, it just keeps refreshing because the device is attempting to connect. I've tied different cables and different ports also, and no luck.
any help will be greatly appreciated, thanks
hachem28 said:
a day after i rooted and flashed a rom on my l9, it just died, idk how. can't get into any kind of "mode". the strange thing is when i connect is via usb it tries to connect but a dialog box comes up in the bottom right saying "USB device not recognized" it makes the connect/disconnect sound over and over until i unplug it. Device manager doesn't show anything, it just keeps refreshing because the device is attempting to connect. I've tied different cables and different ports also, and no luck.
any help will be greatly appreciated, thanks
Click to expand...
Click to collapse
Adb drivers? have you installed them?
kishandoshi said:
Adb drivers? have you installed them?
Click to expand...
Click to collapse
well i installed the original l9 drivers, is there specific adb drivers for it?
hachem28 said:
well i installed the original l9 drivers, is there specific adb drivers for it?
Click to expand...
Click to collapse
may b. well my story is. i had bricked my phone. installed the universal adb drivers as my phone doesnt have any driver released by company. and i did restored and flashed stock rom. hope it works for you.
kishandoshi said:
may b. well my story is. i had bricked my phone. installed the universal adb drivers as my phone doesnt have any driver released by company. and i did restored and flashed stock rom. hope it works for you.
Click to expand...
Click to collapse
Do you happen to have a link for the universal adb drivers?
hachem28 said:
Do you happen to have a link for the universal adb drivers?
Click to expand...
Click to collapse
adbdriver.com
hachem28 said:
Do you happen to have a link for the universal adb drivers?
Click to expand...
Click to collapse
More than likely your device is malfunctioned.
Sent from my LGMS769 using XDA Premium 4 mobile app