Related
hey guys!
So I have had my phone for about 3 month, and today I had decided that I should see if they're any firmware updates since I had not checked in a while. So I did a search in my settings and it said I need to update so I did so. So it downloaded and it seemed to install but when it went to reboot, it just stayed on the boot screen.
I went into recover mode and set it back to factory settings, but still had no luck. Any ideas what to do as plan b?
Give it a few minutes (5-10 Mins) for the first time after updating... It may seem locked up but usually its not the case... After the first boot.. It will boot normally again....
If truly not working suggest downloading latest firmware package for your model and try flashing via odin
hope that helps^^
Sent from my SHW-M250K using XDA App
http://forum.xda-developers.com/showthread.php?t=1108499
jje
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
alexbrugs said:
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
Click to expand...
Click to collapse
Branded Provider roms post dev section
Stock Samsung roms .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Help out...Samsung galaxy can't boot
Hello Guys,
I am not sure whether I am putting right question in the right place or not? I hope you guys don't mind and apologize me as my mind not working due to my foolish act trying to fly even without wings.....
Here is the story
I got my galaxy s2 I9100 a week ago. I tried to go for root. for this I did it using Odin v1.85. My firmware KH5 as its not available here I tried a related one say KH4. I followed all instructions carefully. Successfully brought in download mode. selected the download mode. connected with odin and browse the PDA .tar file. my mobile was recognized by yellow indicating and I starting. It showed the process running and also showed yellow bar turning in green saying "Pass". But soon mobile stucked at boot page and a yellow triangle appeared. Now I realized I made something wrong in eager of rooting. I tried other .tar files like KH1, KH3 and even KF- etc. But same problem. I tried to solve it by bringing recovery mode but It can't go to recover mode even. Now I can only go to download mode can try flashing via odin but can't get my mobile ahead of boot logo. Please helppppppppppppppppppppppppppp
@ habeebrasheed,
Flash stock firmware from Intratech thread via Odin with phone in download mode.
Then you will have a working phone and can start fresh.
Sent from my GT-I9100 using xda premium
Thanks anyway
@UpInTheAir
Thank you for the suggestion
I have submitted it as the warranty still void ... lets see if they do it or reject straigh forward. Thank you. I will sure keep in mind your solution,
Thankssssssssssssssssssss
Hello!
I've recently flashed the ICS OS onto my galaxy s2. However it seems to be a UK version as I cannot agree to the software update agreement along with the time won't update automatically. It seems to be a little glitchy on my phone as well...
Is there anyway I can revert back to the old gingerbread?
Thanks,
Yes its buggy, its an alpha and not really daily driver quality
How to get back to gingerbread: see here
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Morphinated said:
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Click to expand...
Click to collapse
*sigh* Download the bell firmware, its a .exe, after you run it, it will extract into a .tar
To quote the thread "If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file."
Just shove it into "PDA".
Pleases read the thread.. and flash the bootloaders first, then flash the rom.
Thank you very much. <3
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
ultramag69 said:
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
Click to expand...
Click to collapse
Yeh, I know right, im in a bored/good mood so I have patience!
I know that one, worked a double then a nightshift once, I was dead to the world.
I recognise your avatar, did you ever have a HTC hermies, or a blueangle?
As far as the getting back to GB, you should be fine doing;
1) Odin flash old bootloaders
2) Odin flash firmware
Can you get into CWM recovery? Maybe flash something via zip, white cache/data/etc?
Otherwises thats just weird, I have seen peoples phones do weird things after flashing the ICS leaks, like someones refusing to run CM7, even after flashing back old bootloaders and double flashing the CM7 zip.
Im staying away myself, for the time being, however tempted I am
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Take out your exteral sd and make sure you flash your old modem back.
ultramag69 said:
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Click to expand...
Click to collapse
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Ok, fixed it good...
You need to flash with ODIN 6 times...
!st I flashed stock rom, I had a full screen of red error messages, ignore them. I then flashed cf-root over the top. I got into recovery by holding down up volume, home button and power until sgs logo appeared then released power. Held in other buttons until recovery menu appeared...
I then cleared cache, dalvik cache and then went into mounts and formatted everything (remove your sd card or it will be wiped too).
Flash stock with Odin a second time, the cf-root a 2nd time. Repeat above steps but also in advanced fix permissions.... Also do a full wipe of data..
Flash with ODIN a 3rd time, 1st stock then cf-root... You should be back up and running... Now flash away with whatever rom you please and leave KP8 alone until its easier to fix...
Sorry if this doesn't make a lot of sense and its possible I did a few steps more than I needed but I just got home after a lovely night at work and REALLY need sleep...
Cheers, hope this helps....
Thats just mental, glad you got it working though
veyka said:
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Click to expand...
Click to collapse
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
shehadl said:
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
Click to expand...
Click to collapse
See this post: clickme
veyka said:
See this post: clickme
Click to expand...
Click to collapse
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
shehadl said:
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
Click to expand...
Click to collapse
<removed link to something you shouldnt use>
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Do you have a backup of the stock or another rom that you can then revert back to stock from?
Just curious as to what the issue is, ICS is running fine for me, only issue is the video codecs which I knew about. Maybe a reflash would help if its glitchy?
veyka said:
Oh dear, did you use this: clickme?
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Click to expand...
Click to collapse
OMG...How could you give him that link? Now he has a serious problem...
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Lennyz1988 said:
OMG...How could you give him that link? Now he has a serious problem...
Click to expand...
Click to collapse
I didnt give him that, he said he used ezodin and that was what I found when i looked for ezodin, I was asking if he used it Thankfully he didnt.
shehadl said:
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Click to expand...
Click to collapse
Ok, so you have bootloader from gingerbread back on your phone?
If you had flashed i9000 bootloaders onto your i9100 you would have bricked, you haven't, we are all good.
Now you just need to fix the FC'ing, what stock rom are you flashing?
I am new with the Android,
i have a i9100 galaxy, which i have flashed and other phones also (for freinds) several times with new firmware 2.3.4
Bubut this time i was trying ICS on my s2, after installing ICS with odin the phone did not perform well and it was not upgrading the market to google play, so i decided to reformat and install from scratch,
I entered the recovery mode and formated all options then into download mode and i tried to install ICS and the install was not successfully, then i do not why! i decided to reflash the pit, all went well and after the flashing it shut down and never came back on again
Now i have an expensive brick.
It does not start at all (i have tried download mode, recovery mode, remove battery etc.. no luck) it is totally dead
Any one Help !!!!
Thank you
Alot of guides said never do the .pit repartition because you may hard brick your device. Send it to samsung service center for repair.
Sent from my GT-I9100 using xda premium
Seriously, why cannot people understand that flashing the PIT file is totally unnecessary and will more often than not, end up bricking your device?
You'll need to send it to Samsung for repairs.
ephraim033 said:
Alot of guides said never do the .pit repartition because you may hard brick your device. Send it to samsung service center for repair.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for the quick reply, i was hoping for a different answer
i have read that that a JTag cable might help i will try later and get back with results
JTAG repair equipment is expensive & takes expertise to use. You can send it to someone who does JTAG repairs; this one in the US does them for $50 USD, no doubt there are others you can find via Google.
rdergham said:
Thank you for the quick reply, i was hoping for a different answer
i have read that that a JTag cable might help i will try later and get back with results
Click to expand...
Click to collapse
rdergham said:
I am new with the Android,
i have a i9100 galaxy, which i have flashed and other phones also (for freinds) several times with new firmware 2.3.4
Bubut this time i was trying ICS on my s2, after installing ICS with odin the phone did not perform well and it was not upgrading the market to google play, so i decided to reformat and install from scratch,
I entered the recovery mode and formated all options then into download mode and i tried to install ICS and the install was not successfully, then i do not why! i decided to reflash the pit, all went well and after the flashing it shut down and never came back on again
Now i have an expensive brick.
It does not start at all (i have tried download mode, recovery mode, remove battery etc.. no luck) it is totally dead
Any one Help !!!!
Thank you
Click to expand...
Click to collapse
Same problem here , after flashing PIT my phone goes black with no respond at all , no charging .....
As stated on other link, sounds like youve both flashed the wrong pit file and the only repair for this is JTAG service.
Flashing a pit is safe, so long as you do it the correct way and flash all the accompanied files, ive flashed samsung pits and never bricked before, there shouldnt be confusion because samfirmware release a lot of stock roms with the pit file and theres plenty of guides to flash them and there is only 1 pit file by samsung for the i9100, its really up to you guys to make sure you are using the correct file when flashing your phones, if you dont know then you should never touch anything more advanced than a 1 file package.
Hope you get them sorted but i think youll have problems.
Samsung Galaxy S2 i9100 dead after flash
Hello friends i'm new with Android recently i saw a video from youtube and download the firmware and followed the instructions but sadly my phones totally dead after that no response from my phone when ever i connect it to my laptop through USB it shows the charging icon for few seconeds and also i booted to download mode with USB but no benefit plz help me
Hello everyone,
Hoping you can help me before my mrs cuts my nuts off. She asked me to update her GS2 (GT-I9100 on 02) and completly wipe the phone as she has had random apps appear etc etc.
I said that wouldnt be a problem as ive done alot on my GS3, though i am still pretty new to the Android scene (Previously iPhone).
So she was on Stock 4.0.4 XXLQ6 firmware.
I followed the guide to root from here as i was aware of the hardbrick bug in this firmware.
http://forum.xda-developers.com/showthread.php?t=1501719
After that it was time for the Wipe data etc and flash the new rom. I chose JELLYBAM as its Android 4.2 with a mix of other things. Sounded perfect.
I followed all the steps EXACTLY from the Devs page:
http://www.igio90.net/how-to-install/
All seemed to be going well at first, got to select afew options etc. Then it said it was Extracting the package...This is were the problems started.
It was stuck at 2% for AGES, then out of the blue the screen just went BLACK/BLANK......Hmmmm i thought!
I have since been trying to source info from everywere about how to turn the phone back on but having no luck at all. I have tried all the Soft/Hard boot methods, ive left it on charge (Yes it gets hot near the camera) and tried all boot methods whilst plugged into laptop with ODIN loaded up.
Nothing seems to be working.
Any help what so ever will be much appreciated. This device was never previously rooted. Im gutted a it was all going so well...I shoulda guessed something would go wrong.
Toon
Are you able to enter download mode? If you can make sure you have samsung drivers installed! Also JellyBam rom is not only for i9100 but other models too, are you sure you had the right rom? If you can't enter downlaod mode then try a USB jig?
Sent from my GT-I9100 using xda premium
UltimateAnas said:
Are you able to enter download mode? If you can make sure you have samsung drivers installed! Also JellyBam rom is not only for i9100 but other models too, are you sure you had the right rom? If you can't enter downlaod mode then try a USB jig?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for your reply, Unfortunatly i cannot enter any mode what so ever. The phone is literally dead...yet getting VERY hot as its plugged in.
Was thinking about taking it in to O2 2mora and seeing what they can do. Damn.
If your still under warranty you should get a new motherboard.They won't be able to tell you've rooted it since it seems hard bricked.
Next time,get a custom kernel on it a.s.a.p and backup efs and make a nand backup before you start flashing roms.
Either that or stay away from 4.0.4 stock.
Sent from my GT-N7000 using xda premium
theunderling said:
If your still under warranty you should get a new motherboard.They won't be able to tell you've rooted it since it seems hard bricked.
Next time,get a custom kernel on it a.s.a.p and backup efs and make a nand backup before you start flashing roms.
Either that or stay away from 4.0.4 stock.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for your reply, I did put a custom kernal (Sirayh?) on it prior.
The phone was a year old august just gone! Not sure Samsung be interested.
See if you can get your hands on a usb jig.If that fails try for a jtag.
Samsung warranty should be 24 months if you need it.
Sent from my GT-N7000 using xda premium
So you did a wipe on a Samsung 4.0.4 ROM with original kernel? Then you have indeed hardbricked your phone. You said you were aware of this bug, so I can't figure out why you would do a wipe?
Cenobite_ said:
So you did a wipe on a Samsung 4.0.4 ROM with original kernel? Then you have indeed hardbricked your phone. You said you were aware of this bug, so I can't figure out why you would do a wipe?
Click to expand...
Click to collapse
No i changed the kernal, but followed the guide posted by DEV to install the ROM. Guessing i made a mistake somewere down the line as the phone is bricked!!
JIG & JTAG....will these help solve my problem? Not really clued up on them though i have done a brief look around. JTAG services is not in my area.
NO, on hardbricked S2 JIG/JTAG won't be useful. You can check my thread http://forum.xda-developers.com/showthread.php?t=1756242 for more info.
PS : the direct signs of this kind of hardbrick is a totally dead phone & back side getting hot (near the camera lens)
googy_anas said:
NO, on hardbricked S2 JIG/JTAG won't be useful. You can check my thread http://forum.xda-developers.com/showthread.php?t=1756242 for more info.
PS : the direct signs of this kind of hardbrick is a totally dead phone & back side getting hot (near the camera lens)
Click to expand...
Click to collapse
Is there any way to fix this or do i owe my mrs a new phone?
Just took it to a repair store and he said its knackered, but to be honest he wasnt much help...more interested in the texts he was getting on his phone!.....Typically a GS2...Im still pondering if he was taking the micky :silly:
if your s2 is still under warranty, just take it to the reapir service and tell them that the phone was on charge all night and didn't wake up in the morning
they won't be able to know what you did to it since it's completely unaccessible. If you successfully convince them, they'll change the motherboard !
PS : That isn't my idea but from what I saw in the hardbrick warning thread, most of the concerned people did the same trick ...
googy_anas said:
if your s2 is still under warranty, just take it to the reapir service and tell them that the phone was on charge all night and didn't wake up in the morning
they won't be able to know what you did to it since it's completely unaccessible. If you successfully convince them, they'll change the motherboard !
PS : That isn't my idea but from what I saw in the hardbrick warning thread, most of the concerned people did the same trick ...
Click to expand...
Click to collapse
Yeah i think this is the route imgoing to have to take Just spoke with them regards my GS3 and they said itll be 2 weeks to repair and return. No phone for 2 weeks
I just got off the phone with Samsung and they are taking it in for repair. No local service centers so im awaiting a jiffy bag. Then 2 weeks to get the phone back!
Plese, need help, tried to downgrade firmware from 4.0.4 to 4.0.3 using Odin and now i'm getting an error: android.process.acore has stopped, and can't really do anything.
is there anything I could do now or is my phone bricked?
Thanks in advance!
Pooshkis said:
Plese, need help, tried to downgrade firmware from 4.0.4 to 4.0.3 using Odin and now i'm getting an error: android.process.acore has stopped, and can't really do anything.
is there anything I could do now or is my phone bricked?
Thanks in advance!
Click to expand...
Click to collapse
Please be more specific if you expect anybody to bother to help you.
When you say "can't really do anything" that doesnt tell us what you have tried and not tried!
1) Can you enter recovery mode?
2) Can you enter download mode?
3) Have you tried a USB Jig?
4) Have you removed battery for 30 mins?
5) What happens when you power on phone?
TheATHEiST said:
Please be more specific if you expect anybody to bother to help you.
When you say "can't really do anything" that doesnt tell us what you have tried and not tried!
1) Can you enter recovery mode?
2) Can you enter download mode?
3) Have you tried a USB Jig?
4) Have you removed battery for 30 mins?
5) What happens when you power on phone?
Click to expand...
Click to collapse
Sorry.
1) Yes
2) Yes
3) trying to find now what it is
4) For 30 mins no, for few minutes - yes
5) It starts and then i got some errors memo.process, process.acore and few others (can't remember now). I can get email, explore through home screens and menus, but can't call, receive calls, write messages, look up contacts or memos and stuff only going through screens. Maybe I could do a hard reset or wipe the phone, but then won't i brick my phone?
EDIT: As user Pilaf suggested (thanking him a lot!) I installed a new siyha kernel then did a full wipe / factory reset, seems everything is backing up from google account and phone is working..
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
krnrdstrm said:
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
Click to expand...
Click to collapse
Did you just get released from a 6 month stretch in jail/or been in a coma or something.
Sent from my GT-N7000 using xda premium
theunderling said:
Did you just get released from a 6 month stretch in jail/or been in a coma or something.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:laugh:
Come on man, he's serious, so let's answer seriously
@krnrdstrm : to avoid the hardbrick, just flash a safe kernel (siyah, speedmod, dorimanx, philz ...) and enjoy ...
PS : didn't you have internet in jail ? :silly:
emmc bug
krnrdstrm said:
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
Click to expand...
Click to collapse
Yea, have a look here http://forum.xda-developers.com/showthread.php?t=1756242
Siyah should be good,
Thanks: googy_anas
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick