Hello i am new user from Bulgaria and i have Prestigio PAP4040 Duo with Android 4.0.4 Ice Cream Sandwitch.Can I flash my phone with the new Android 4.1 Jelly Bean and how can i choose the right ROM for my phone.Is the Jelly Bean going well?Sorry for the BAD English.
I have the same device
demoncho87 said:
Hello i am new user from Bulgaria and i have Prestigio PAP4040 Duo with Android 4.0.4 Ice Cream Sandwitch.Can I flash my phone with the new Android 4.1 Jelly Bean and how can i choose the right ROM for my phone.Is the Jelly Bean going well?Sorry for the BAD English.
Click to expand...
Click to collapse
Phone is very good and cheap. I've been using it for a while. So far no luck rooting or modifying it.
Any helo would be apreciated.
THX
If anyone would like to know, I've managed to root the phone using following "n00b" steps:
1. Step
- download, install and run SuperOneClick v2.3.3.
- make sure you have USB debugging mode on
- plug in USB cable and click root.
- the program will ask you to install drivers.
- install them even if they are not signatured by Microsoft.
- after you installed all the drivers, restart computer
2. Step
- download and install this http://www.4shared.com/dir/RR8GM4vj/_online.html
- run runme.bat
- choose 1) Normal
- follow the instructions
- make sure you hit restore button on your device when prompted
- phone will reboot twice, don't worry
Enjoy your rooted device!!!
Credits to bin4ry for creating the method.
If you like my post, thank me
I have rooted my phone using this Android_4.0.4_mtk6575_Alps.ICS.MP.V2.2_ROOT. It`s easy and i have no problems with it.But I want to change my stock rom with 4.1 Jelly Bean but i don`t know is my phone will run Jelly Bean?
there is no working recovery on 4040 know yet
there isn no working jb or any coustom rom know to me that works on 4040
but if you want you can track update packages while downloading upgrade
and download flash tool drivers service manual and clean stock rom with version 1.0.10 it works much better then stock with upgrade.zip via ota i case off system crash while modding
new info
must say that stock rom with updates was terrible with rom nr PAP4040DUO_20121101_V1.0.10 mine GPS is much better. Before update there was a 64 -70 feet, now take a look gps i worth using
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I check for System update there was one and when i download it and run it my phone turn off and go to recovery and starts to install the update but when it goes to 1/3 from 100% it shows some Error in system\media\bootanimation.zip and some ****s after that and can`t install.Do you know why and how i fix it?
demoncho87 said:
When I check for System update there was one and when i download it and run it my phone turn off and go to recovery and starts to install the update but when it goes to 1/3 from 100% it shows some Error in system\media\bootanimation.zip and some ****s after that and can`t install.Do you know why and how i fix it?
Click to expand...
Click to collapse
Every update package via ota have a list of correct checksum of files or a part of it you must put orginal file then do update i had this same error with build.prop with old one update have happy end
WRaven512 said:
Every update package via ota have a list of correct checksum of files or a part of it you must put orginal file then do update i had this same error with build.prop with old one update have happy end
Click to expand...
Click to collapse
You may right but i don`t have backup of the original bootanimation.zip. I have tried to Reset to factory but with no sucsess.
demoncho87 said:
You may right but i don`t have backup of the original bootanimation.zip. I have tried to Reset to factory but with no sucsess.
Click to expand...
Click to collapse
let see i will upload my own backup off system folder this is a clean clean version off system folder before rooting and any mod, may some time to upload
then take it in safe place and make credits
uploading on this link may take 16 min tu upload
https://dl.dropbox.com/u/11070101/system.7z
and this is a file with i have from prestigio server
maunal +drivers + service rom +and software to make a clean phone
here is the link upload may take a while
https://dl.dropbox.com/u/11070101/PAP4040DUO_20121101_V1.0.10.7z
please take all links to a safe server a don want to use my dropbox limit to expire because this are large files and a have a more then one android device and modded firmware which I am sharing
Sorry for my pour english BTW I'm now just a little bit drunk
and this is rooting tool for 4040 which i was using
it also make a bcp of a rom befor mod
make a soft root and bcp and then install root with this tool
https://dl.dropbox.com/u/11070101/MTKdroidTools.7z
Thanks a lot i restore my original rom.THANKS!!!!You are great!
There is cwm ported by Croatian guy. It works I've tested it.
http://translate.google.com/transla...//forum.pcekspert.com/showthread.php?t=240504
Just a quick update
I'll put my ClockWork Mod builds for PAP4300 and PAP4040 to my server. Can't post any links here yet, so be sure to check the link from t830mc's previous post.
For now, only 2 quick builds made using kitchen plugin for mt6575 are available.
This is all pre-alpha, not mounting anything properly, so it's pretty much useless for end users.
However, adb works fine for me (tested only on PAP4040), so I can mount and do what's needed.
I'm testing things for model 4040 myself, but can't test for model 4300 because I don't have that device, so be sure to let us all know if it works or not.
1.0.09 update
could someone upload update 1.0.09 ? i currently have version 1.0.08 and OTA offers me 1.0.10, but it tells that update.zip is invalid when i try to update, so i guess i need to update 1.0.09 first
Hello, can someone please refute the fact that this phone does not work on applications that use google maps: Meteor, Everytrail, TripJournal, Geocaching (official), etc.?
Support Prestigio me referring to the producers of these programs.
One of the programmers wrote me that the problem is in the poor implementation of Android, which must be repaired by Prestigio.
So a vicious circle and I do not work on this phone programs that use Google Maps. One user malfunction layers above the map also confirmed.
Thanks
Root
Android 4.0.4
PAP4040DUO20121101.V1.0.10
Guess what I did on 4040
Sent from my PAP4040_DUO using xda app-developers app
europoint said:
Hello, can someone please refute the fact that this phone does not work on applications that use google maps: Meteor, Everytrail, TripJournal, Geocaching (official), etc.?
Support Prestigio me referring to the producers of these programs.
One of the programmers wrote me that the problem is in the poor implementation of Android, which must be repaired by Prestigio.
So a vicious circle and I do not work on this phone programs that use Google Maps. One user malfunction layers above the map also confirmed.
Thanks
Root
Android 4.0.4
PAP4040DUO20121101.V1.0.10
Click to expand...
Click to collapse
There is a bug in system folder just copy two files from frameworks to framework dir and reboot
Sent from my PAP4040_DUO using xda app-developers app
Many thanks, it works. :good:
Another problem:
How to install "Google Play services" com.google.android.gms (for example, needed to log on to YouTube or the functioning of the app My Tracks)?
Installation of "services" always ends up error message:
Incompatible with other applications that use the same shared Memberlist ID.
(The procedure described here did not help: http://forum.xda-developers.com/showthread.php?t=1219029)
Thank you.
hmm I did not notice this issue before you get this issue when you will get latest update from play store . Now when i have a custom version of a rom and i have instaled youtube in /system/app, and i just removed update,
this is orginal youtube apk or not but it works fine
just clear data and uninstall current youtube.apk and install this one or push it to to system and DONT UPDATE IT
https://dl.dropbox.com/u/11070101/com.google.android.youtube-2.apk
also you may try older ver of my tracks and try if it works, Prestigio must do a fast update of this error but i think they are to busy with mk6577 and mk6575 will be left alone
Thank you, Youtube now works.
Still, I can not install "Google Play services" (com.google.android.gms) that are needed to run "My Tracks" (com.google.android.maps.mytracks).
Installation of "services" always ends up error message: Incompatible with other applications that use the same shared Memberlist ID.
In the file "/data/system/packages.xml" is nothing (com.google.android.gms) I could erase.
Thank you.
Can anybody test SDXC 64GB card on this phone?
Can anybody test SDXC 64GB card on this phone?
Prestigio claims that this phone suports SDHC and SDXC standards up to 32 GB.
But SDHC standard is up to 32GB and SDXC starts from 32GB up to 2 TB.
So my question is maybe they did not have 64 GB SDXC card to test
Related
I have the new goophone 4gs and I'm trying to root the software but since it's a clone I'm not sure how. I know the gooapple 3G was able to be rooted.
If anyone can give me so hints it would be greatly appreciated as I also need to install Market
Thank you!
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Okay thanks
I Found It and if anyone needs it here it is
P.S. Here is the clockworkmod but i haven't quite figured out how to use it
Here is the CWM app
Goophone 4gs
I can't get this working on my goophone 4gs. I also found this on a chinees website. Have you got root access on your 4gs?
I got this from the sale website.
A Guide To Installing APK Apps On Your Google Android Phone
Thursday, June 30, 2011 7:26:52 PM America/Los_Angeles
Because the Android operating system is a relative newcomer to the mobile phone market, a strong and cohesive Android Internet support community appears to be lacking. Without an adequate Android support system in place, many Android users are left in the dark when it comes to many tricky tasks, like installing third party applications to their Android mobile phones. In order to install third party applications to your Android phone, you need to install APK, or Android Package, files. In this article, we will cover the two ways you can install APK files to your Android phone and show you how to take advantage of the wide variety of third party Android applications currently available.
Installing Applications Through the Android Market
The Android Market is essentially Android’s answer to Apple’s iPhone App Store. As of September 2009, the Android Market already offered well over 10,000 applications, and this number has only continued to grow. In addition to the applications the Android Market offers, you can also use it to install other downloaded third party applications.
Copy the APK file to your Android’s memory card and insert the card into your phone.
Download and install the Apps Installer application from the Android Market
Once installed, the Apps Installer will display the APK files on the memory card.
Click and install your APK files.
Installing Applications With Android SDK
It is possible to install APK files without utilizing the Android Market, although the process is more difficult and complex. To avoid the Android Market, you need to use Android SDK.
Download and install the Google Android SDK program and the Android USB drivers. The download links are as follows: code.google.com/android/intro/installing.html
dl.google.com/android/android_usb_windows.zip
You need to modify your Android’s settings to allow the installation of applications from other sources. Under “Settings,” select “Application Settings” and then enable “Unknown Sources.” Also under “Settings,” select “SD Card” and “Phone Storage,” and finally enable “Disable Use for USB Storage”
This last step is easy. Open Command Prompt and type the following: adb install <1>/<2>.apk
However, when you type the command, replace <1> with the path to your APK file and replace <2> with the name of the APK file.
You’re done! Your application is now ready for your use and enjoyment.
"Because the Android operating system is a relative newcomer to the mobile phone market, a strong and cohesive Android Internet support community appears to be lacking. Without an adequate Android support system in place, many Android users are left in the dark when it comes to many tricky tasks, like installing third party applications to their Android mobile phones."
I guess they never heard of us.
Yes I have root access, you must unzip the root file given then open the 谷锋4gs-ROOT-REC工具.bat file and it should give root through a adb looking process. Just have the phone plugged in the computer (it has to be windows) and the Adb will do the work.
Make sure you install the driver of this phone on the computer. or adb will give an error that it doesnt see any phone.
At the end of the adb process on your computer it will say your finished and your phone will restart into a Chinese clockworkmod just choose the FIRST one and it should restart again. But it freezes here sometimes and if so DONT WORRY just press the hidden reset button in the headphones jack and it will restart and check if you have root!
After you have root I can give you a file that gives market and it updates to the current one!
You'll have to flash that though which will be tricky sine CWM is in chinese....
Thanx the goophone is rooted, now all i need is the android market.
I tried to flash this with the clockwork mod, but thats tricky in chinese
I hope you can help me out i sent you a pm. Maybe a how2 on the forum for other gooapple owners as well.
I have a goophone 4gs, please who can help me to root it?
How can I install driver on pc?
obijankenobi said:
Thanx the goophone is rooted, now all i need is the android market.
I tried to flash this with the clockwork mod, but thats tricky in chinese
I hope you can help me out i sent you a pm. Maybe a how2 on the forum for other gooapple owners as well.[/QUOT
Look for the GAAPS or Google Apps zip then Flash Then Go to- Manage Applications- Market- Then Uninstall Updates- Clear Data and Cache ...Then After All this I Got it to Work !
Click to expand...
Click to collapse
Found New Rom
http://www.zjapk.com/thread-525-1-1.html
Greetings! I am user "mayiandjay" from youtube. I have made previous videos about the gooapple 3g providing some support. I have ordered the 2nd generation GOOAPPLE V5. I will receive it Tuesday January 17 2012, I will post many videos such as:
The Goophone 4gs unboxing
The Goophone 4gs sdcard memory upgrade
The Goophone 4gs root and recovery.img installation
How to install Goophone roms etc.
Lets work together and make this work!
Hello ILOVETHE90's v2!
I have found that today 01/15/2012 the chinese released the latest rom for the Goophone 4gs and I assume it will work for the gooapple v5. I have successfully downloaded it but I am still waiting for the phone to arrive. I'll keep you guys updated. Here is the link: http://www.zjapk.com/thread-1874-1-1.html
Im lookin to buy one where can i order?
Sent from my SAMSUNG-SGH-I727 using xda premium
mayiandjay said:
the chinese released the latest rom for the Goophone 4gs and I assume it will work for the gooapple v5.
Click to expand...
Click to collapse
Hi, appreciate you video in youtube,done well.
I have goophone 4gs - can I use your rom 22-12 in my phone, phone was already rooted?
Try to make alive android market, but it still don't work. Do you solve this problem?
---------- Post added at 08:33 AM ---------- Previous post was at 08:27 AM ----------
ILOVETHE90's said:
Here is the CWM app
Click to expand...
Click to collapse
Is it in english or in chinese? I have goophone 4gs and I want to install pure android 2.3, because market don't work in this appleUI rom.
Some info.
Hey everyone,
I just got my Goophone 4GS this week, and have spent some time playing with it. Here is what I've figured out (I speak so-so Chinese):
1. Mine came unrooted. I used Superoneclick 2.3.3 (by Shortfuse) to root it, and it worked a charm. Using this software (I am on Win 7 64 bit PC), I didn't need any additional drivers, and all worked as expected. In the program, just go to - Advanced -, choose to - Check Drivers -, then go back to - General - and choose - Root. Then wait.
2. Clockworkmod came pre-installed for me (in Chinese). Hold down the volume up button when you start the phone to access CWM. Find screenshots of the software in English (if you can), and the menus in Chinese are arranged in exactly the same order. That should make navigating it easier.
3. New roms are readily available at goophone (dot) com and at zjapk (dot) com. You'll find both iOS interface roms and stock Android interface roms. Enjoy. The latest iOS rom as of this writing is 2012-March 02, and it claims to enable 3G on the phone!!! Haven't tried it yet, so can't confirm. Roms are updated weekly, and sometimes even daily!
4. I have yet to find a Google Apps zip to use with this phone. Any suggestions?
Hope I've been of some help.
Enjoy,
DregonX
Hello.
I bought a Gooapple V6.
But I have some doubts on the apparatus.
More precisely, the seller who have sold it to me "achinaseller" guaranteed that it is a Gooapple V6 (a Gooapple V5 3G updated with a faster software). And with the promise to find pre-installed Google PlayStore.
But Google PlayStore there isn't in the phone. And even if I try to install it, at the time that I start downloading a file, the application crash.
In addition, if I want to try to put a classic Android's rom without the IOS interface available from the "official website" rom.gooapple.com, tells me that at first time I must check the version of my motherboard typing the code *#2170#* But, if I try to do this code, on my phone doesn't give any function...
Sure my phone is Android, 3G and It has an 8Mpixel camera. But what kind of phone is it??
Can you help me?
In the "system", I have just read that my phone is model MC605CH. In many threads I have read that this model name is the same of Goophone 4GS.
Is it possible that my phone is a Goophone 4GS?? And can I install a Goophone's rom?? I am afraid to break my phone..
I've just download drivers MTK6573.RAR (from Anexonel) and I've done the root by superoneclick.
Thanks in advance if you can give me an hand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did this http://forum.xda-developers.com/showthread.php?t=1332554 to root it. After restart it just shows the apple bootscreen an it is no way to turn the device off or start recovery mode.... so i had to use the secret reset button in the audio jack. But now everything is fine!
---------- Post added at 02:13 AM ---------- Previous post was at 02:01 AM ----------
Another issue is the gps Signal is verry weak on my goophone 4gs. Inside no signal at all ok... but even outside i get max 3-5 Satelites with max half a bar signal strength. I tested some different navigation apps. Somtime no localisation at all but most it jumps around in the streets like a druged frog...
Anyone the same problems maybe another rom may help? Or is my Hardware broken?
Another fummy thing is that GSM Signal strength loses up to 2 bars when I touch the phone on the metal frame on the upper side of the phone. When I phone sometimes i have to grab it as low as possible to get a goo voice quality... also verry wired.
how to know the android version??
I have a goophone 4s 8 gig.... how to know the android version??
When I installed nAa's port recently published for our Mini Pro's, I noticed there was no way to use Market, register a Google account, or use any of the Google services that comes by default on most ROM's. This is because Google Apps are protected by copyright, so Cyanogen decided to wipe them from their official ROM. This can be easily solved by flashing them, and although this is very simple and easy, I found that there isn't much talking about this. Also, I saw there was some people asking and getting no answer, so I'd like to share this. Yes, flamers, even if it is REALLY easy or whatever you may say.
First of all, click this link. Here, you will always have the lastest version of the package, so don't worry about the dates. Then, scroll down and click the Download link, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Ignore the other downloads. EDIT: Unless you want other versions of Android. In that case, go to the bottom of this post.
You will get a file called "gapps-gb-20110828-signed.zip". Well, just flash that (Install as any other Custom ROM -DON'T WIPE-) and then, when you turn on the phone, you will get the default setup where Google configures your account and download Google Apps such as Market.
Hope this can help someone c:
IMPORTANT UPDATE: Times goes on, and technology advances at insane ratios. Ice Cream Sandwich's CyanogenMod version is here, and so are its Google Apps. We, on the X10 Mini Pro community, have actually the option to install ports of this great Android mod on our phones thanks to the awesome developers we have. Some of us, like me, still decline to use CM9 or ICS ports (In my case, because of the awesome stability and every-day use of the Gingerbread ROMs out there), and thus you should know:
-If you are going to use an Ice Cream Sandwich(4.x) ROM, you should download the CyanogenMod 9 Google apps version.
-If not, if you still preffer to use a Gingerbread(2.3.x)-based environment, download the CyanogenMod 7 Google apps version, the one on the screenshot above on this post.
*I don't know your reasons, but if you would like to keep using an even earlier version, I'll list them for you:
Froyo(2.2) ROM, CyanogenMod 6 (Tiny version for our Mimmi -x10 Mini Pro-) is for you.
Eclair(2.1) is CyanogenMod 5 (Tiny version for Mimmi)
Donut (1.6) is CyanogenMod 4 (Tiny version for Mimmi)
Read ALL in nAa first post in MiniCM7 Rom thread. Look at instructions.
Sent from my U20i using XDA App
It just says "Flash gapps", it doesnt explain much further and that's what kept me stuck a bit. That is why I wrote this. Not the GREAT guide but will save some minutes of research to some people...
And there is a download link too ;-)
Sent from my U20i using XDA App
I think if we read carefully nAa said at his post we got no problem for gapps. From 1st flash until now I have no problem on it
Thanks!
There were android ics 4 apps too on the list. have you tried any of them? Just curious.
kinung said:
I think if we read carefully nAa said at his post we got no problem for gapps. From 1st flash until now I have no problem on it
Click to expand...
Click to collapse
agree! i have got no problem with nAa ROM
youthisbaka said:
agree! i have got no problem with nAa ROM
Click to expand...
Click to collapse
Ok, it's great you didn't had problems but there is still people that have or had, like me or TommyLee. Think about them too
I installed the gapps over my rom, but gmail is still missing, what can i do?
s0ftcorn said:
I installed the gapps over my rom, but gmail is still missing, what can i do?
Click to expand...
Click to collapse
Lol, market xd Not all GApps are on that package, just the basic ones. Every other Google App you need, you should download it from the market individually.
i cant. The market app doesnt show gmail and through the "web browser" market on my pc it says my device is incompatible.
EDIT:
Solution: http://gmail.droidload.org/
s0ftcorn said:
i cant. The market app doesnt show gmail and through the "web browser" market on my pc it says my device is incompatible.
EDIT:
Solution: http://gmail.droidload.org/
Click to expand...
Click to collapse
Describe in detail your problem so I can add it to the main thread c:
I have a bit of a n00b side question i'm afraid. I've flashed a ROM which I love but how do I selectively flash gapps, the Nexus 4 comes without the native calendar, email etc apps, but if I flash the latest gapps these are flashed back onto the device (obviously). What is the best approach get this ROM with the latest Google services apps and not AOSP apps, I want Chrome, Camera, Calendar etc. Should I just not flash gapps and use Titanium back and backup user + system apps or just flash the ROM and then download them from the play store?
Thank you nico, Now i understand why gapp exists!
nico444164 said:
When I installed nAa's port recently published for our Mini Pro's, I noticed there was no way to use Market, register a Google account, or use any of the Google services that comes by default on most ROM's. This is because Google Apps are protected by copyright, so Cyanogen decided to wipe them from their official ROM. This can be easily solved by flashing them, and although this is very simple and easy, I found that there isn't much talking about this. Also, I saw there was some people asking and getting no answer, so I'd like to share this. Yes, flamers, even if it is REALLY easy or whatever you may say.
First of all, click this link. Here, you will always have the lastest version of the package, so don't worry about the dates. Then, scroll down and click the Download link, like this:
Note: Ignore the other downloads. EDIT: Unless you want other versions of Android. In that case, go to the bottom of this post.
You will get a file called "gapps-gb-20110828-signed.zip". Well, just flash that (Install as any other Custom ROM -DON'T WIPE-) and then, when you turn on the phone, you will get the default setup where Google configures your account and download Google Apps such as Market.
Hope this can help someone c:
IMPORTANT UPDATE: Times goes on, and technology advances at insane ratios. Ice Cream Sandwich's CyanogenMod version is here, and so are its Google Apps. We, on the X10 Mini Pro community, have actually the option to install ports of this great Android mod on our phones thanks to the awesome developers we have. Some of us, like me, still decline to use CM9 or ICS ports (In my case, because of the awesome stability and every-day use of the Gingerbread ROMs out there), and thus you should know:
-If you are going to use an Ice Cream Sandwich(4.x) ROM, you should download the CyanogenMod 9 Google apps version.
-If not, if you still preffer to use a Gingerbread(2.3.x)-based environment, download the CyanogenMod 7 Google apps version, the one on the screenshot above on this post.
*I don't know your reasons, but if you would like to keep using an even earlier version, I'll list them for you:
Froyo(2.2) ROM, CyanogenMod 6 (Tiny version for our Mimmi -x10 Mini Pro-) is for you.
Eclair(2.1) is CyanogenMod 5 (Tiny version for Mimmi)
Donut (1.6) is CyanogenMod 4 (Tiny version for Mimmi)
Click to expand...
Click to collapse
What's mean of MD5?
You will get a file called "gapps-gb-20110828-signed.zip". Well, just flash that (Install as any other Custom ROM -DON'T WIPE-) and then, when you turn on the phone, you will get the default setup where Google configures your account and download Google Apps such as Market.
Click to expand...
Click to collapse
I followed instructions from a youtube video and installed CyanogenMod 9 on my HTC explorer. Before that I rooted my phone and wiped out factory cache, dalvik cache etc. I also installed one of the gapps-ics-xxxxxxxx-signed.zip (do not remember the datestamp) in the recovery mode by selecting the zip file from mounted USB storage card. Now how should I get back my backed up apps/data and google play to install more ?
N.B.; I took back up using Titanium Backup prior to taking all these steps.
Thanks in advance for any help in this regard.
Regards,
Sachin.
Thanks Nico,
Almost 2 years later this is still useful info. My first custom Rom install since honeycomb tablet and I had know idea how to flash gApps. Should have guessed from term "flash" that you use recovery but there seems to be a dearth of details. Your post was first google hit.
Sorry for the late responses, I had totally forgotten about this thread! I don't actually know if this will be useful for the ones who asked the questions, but anyways I'll answer them here in case someone else needs them.
iflyer said:
Thanks Nico,
Almost 2 years later this is still useful info. My first custom Rom install since honeycomb tablet and I had know idea how to flash gApps. Should have guessed from term "flash" that you use recovery but there seems to be a dearth of details. Your post was first google hit.
Click to expand...
Click to collapse
Wow, didn't expected to get first place on Google haha Thanks for the appreciation. Yeah, it is not that hard, but I had little trouble doing it while I was new. It's important to understand not to wipe again to flash gapps also!
sachinbhatt said:
I followed instructions from a youtube video and installed CyanogenMod 9 on my HTC explorer. Before that I rooted my phone and wiped out factory cache, dalvik cache etc. I also installed one of the gapps-ics-xxxxxxxx-signed.zip (do not remember the datestamp) in the recovery mode by selecting the zip file from mounted USB storage card. Now how should I get back my backed up apps/data and google play to install more ?
N.B.; I took back up using Titanium Backup prior to taking all these steps.
Thanks in advance for any help in this regard.
Regards,
Sachin.
Click to expand...
Click to collapse
It depends on how you backed them up on Titanium. Maybe you did a full system backup or just app-per-app backup. If you did a full System backup, try to restore only Data, look into options, custom restore, something like that, there's probably an option there to do that -I usually don't use Titanium haha-. If you did the app-per-app, just look into the list of apps, go to the bottom of the list, and there should appear the apps you backed up, tap on them and restore them with their respective data.
BTW, for the next time, I suggest doing a backup from the Recovery menu, and then do a custom restore > restore Data. Data is where your personal stuff is saved, so no system files will be affected. It may pass down some bugs or troubles because of incompatibility between your backed up ROM and your new one, but normally that doesn't happen.
Laraleo said:
What's mean of MD5?
Click to expand...
Click to collapse
MD5 is just a file that makes sure your file is not corrupt. If you flashed a corrupt file, you could mess up your phone entirely without any chance to turn it back, so it is important, but you don't have to care about it because it gets checked by the phone itself.
mikeparkie said:
I have a bit of a n00b side question i'm afraid. I've flashed a ROM which I love but how do I selectively flash gapps, the Nexus 4 comes without the native calendar, email etc apps, but if I flash the latest gapps these are flashed back onto the device (obviously). What is the best approach get this ROM with the latest Google services apps and not AOSP apps, I want Chrome, Camera, Calendar etc. Should I just not flash gapps and use Titanium back and backup user + system apps or just flash the ROM and then download them from the play store?
Click to expand...
Click to collapse
I think you can get the APK for specific apps inside of the ZIP file that you download from Cyanogen, but I don't know if you can just install them right away. If you want to try, just extract the files, delete the APKs of the apps you don't want, and compile it again.
Even though, you actually HAVE to install Google Apps because you need, for example, the Play Store. There's no problem though with having both Google and Nexus apps (Which I think should be the same ones, being the Nexus like the "official" Google phones), I am pretty sure you can install all of them without getting original ones replaced and then deactivate the ones you don't want to use on the phone's Settings, in the Application Manager.
I hope my answers someday help someone. Regards, Nico.
http://wiki.cyanogenmod.org/w/Google_Apps
Version Package
CM 11 20140606
Download: Torrent or via It Vends, AFH
md5: d840e20fba6f0e2b85d1aebe493a88fa
Screen
Hello. Scratched if the screen on the device that?
Share your new "Experience"
- Since ICS
- Since Condi's AiO Tool
- Since Tiny App's
- Since Etc.
I am pleased to help
(THANKS)
Thank you for this post.
I will profit it to put a problem that I've since Honeycomb and continuous with ICS.
I've created a script to have the music in media library from sdcard2, that script was in init.d folder.
Since then I' m getting the error message:
"android.process.media has stopped unexpectedly. please try again."
Even after deleting the script I get this error every time that tablet starts.
I thought that with ICS upgrade this get fixed, but no, I still have the problem.
I'm sorry in advance if this is wrong topic to post this, it's just that I need 10 posts to create threads and post replys in other topics and I don't wanna just bluntly spam in order to ask one questions.
I have a problem rooting my tablet :
Model number : Sony Tablet S
Android version : 4.0.3
Kernel version : 2.6.39.4 [email protected] #1
Build number : TISU0017700
I've followed this rooting guide and also used Automated ADB Driver Installer for Sony Tablet S and P.
Seems like everythings working :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But I'm getting this problem at the very start of rooting with permissions, I tried old and updated rooting tools several times, but I constantly get this one error.
In any case, I hope this problem can be solved and I have everything right. ( Was trying to root a device first time ) x_x
Colorfool said:
I have a problem rooting my tablet:
Model number: Sony Tablet S
Android version: 4.0.3
Click to expand...
Click to collapse
"Android version: 4.0.3" is the problem. To the best of my knowledge, at this time, a tablet that has already been updated to Android 4.0.3 cannot be rooted, nor can it be downgraded to a version of Android that can be rooted. You will need to wait until an exploit is discovered/created.
rimsilva said:
Thank you for this post.
I will profit it to put a problem that I've since Honeycomb and continuous with ICS.
I've created a script to have the music in media library from sdcard2, that script was in init.d folder.
Since then I' m getting the error message:
"android.process.media has stopped unexpectedly. please try again."
Even after deleting the script I get this error every time that tablet starts.
I thought that with ICS upgrade this get fixed, but no, I still have the problem.
Click to expand...
Click to collapse
Try to delete cache from the app you use for music and if needed restart your tablet,
Cat McGowan said:
"Android version: 4.0.3" is the problem. To the best of my knowledge, at this time, a tablet that has already been updated to Android 4.0.3 cannot be rooted, nor can it be downgraded to a version of Android that can be rooted. You will need to wait until an exploit is discovered/created.
Click to expand...
Click to collapse
Thats indeed his problem, its not rootable for now, bad luck,
Mahaco said:
Try to delete cache from the app you use for music and if needed restart your tablet,
Click to expand...
Click to collapse
I have the same error, please explain better how to solve
thanks
Peter
Mahaco said:
Try to delete cache from the app you use for music and if needed restart your tablet,
Click to expand...
Click to collapse
Not solved.
Sent from my Sony Tablet S using Tapatalk 2 Beta-6
peterf9 said:
I have the same error, please explain better how to solve
thanks
Peter
Click to expand...
Click to collapse
rimsilva said:
Not solved.
Sent from my Sony Tablet S using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Try this,
Reboot into recovery goto Advanced then select Clear Dalvik Cache
If that still didn't do it, then you must reflash you Prerooted ICS,
Edit:
Do you still have some sort of file changed?,
if thats the case then i want to know which app contains the error you could try to reinstall the system app by changing its permissions etc,
with Romtoolbox for example. i will make backup try to upload the file you replace it wil the old one reinstall and then there should be a problem no more,
Also make shure you don't have any files left on you tablet wich contains changes,
Mahaco said:
Try this,
Reboot into recovery goto Advanced then select Clear Dalvik Cache
If that still didn't do it, then you must reflash you Prerooted ICS,
Edit:
Do you still have some sort of file changed?,
if thats the case then i want to know which app contains the error you could try to reinstall the system app by changing its permissions etc,
with Romtoolbox for example. i will make backup try to upload the file you replace it wil the old one reinstall and then there should be a problem no more,
Also make shure you don't have any files left on you tablet wich contains changes,
Click to expand...
Click to collapse
In recovery mode I don't have "advanced" option.
Only 1. reboot, 2. update from zip and 3. factory reset.
edit: SOLVED
In Setting / applications / All
I clear data for program "Media Storage" and the error message stopped!
rimsilva said:
In recovery mode I don't have "advanced" option.
Only 1. reboot, 2. update from zip and 3. factory reset.
edit: SOLVED
In Setting / applications / All
I clear data for program "Media Storage" and the error message stopped!
Click to expand...
Click to collapse
Thanks for letting us know, its good to hear that you solved your problem.
Doesn't come out of sleep
Several times a week, the tablet won't come out of sleep. Pressing the power button does nothing and I have to resort to using the reset button on the right side of the tablet. This started happening after ICS update.
Anybody else have this problem? Solutions?
yea i had that problem with HC, but maybe like 3 times since ive bought device. All i did was plug into pc and it turned on....has not happened in ics update, but it probably will.
Hey,
Just one question
Can we flash ICS by placing the zip in pendrive and connecting it to our Tablet?
Will the AIO tool find the zip?
Thanks
Nope, maby it can be possible but the recovery is not made to search in
external devices, only External SDCard inserted in the normal way,
Because if so you could simply search your PC within recovery
I know it can be used for a bootable image for PC but this won't work on Android (For now)
Who knows if some dev will change Recovery, and make it so, that he can find other devices as well.
I am new to all this. I successfully rooted the tablet without using AiO tool. But i have no idea where to proceed next. Can you dirext me to the appropriate forum/topic/post that can help me move forward.
Sent from my Sony Tablet S using xda premium
Hello all,
Since ICS update, battery behaviour is very weird, it is dischargind very quickly, also when standby. It last one day and a hal whereas before it lasted at least 4 or 5 days... Am I the only one concerned by that problem ? Do you think it could be caused by something else than ICS update ?
Thank you all in advance...
sagar13 said:
I am new to all this.
I successfully rooted the tablet without using AiO tool. But i have no idea where to proceed next. Can you dirext me to the appropriate forum/topic/post that can help me move forward.
Click to expand...
Click to collapse
Condi's AiO-tool topic
elfeneco said:
Hello all,
Since ICS update, battery behaviour is very weird, it is dischargind very quickly, also when standby. It last one day and a hal whereas before it lasted at least 4 or 5 days... Am I the only one concerned by that problem ? Do you think it could be caused by something else than ICS update ?
Thank you all in advance...
Click to expand...
Click to collapse
Its most likely that you have some sort of app installed that drains your battery,
Do you use a Task killer?, that kills automatic?
Because this can cause battery drain aswell, since android has his own way of killing his apps there is no need to kill apps by an 3th-party appkiller.
You can check in your app settings, within running apps, which apps currently are
running, like a music player of movie player.
Also Bluetooth, Wi-Fi, Auto Sync and GPS can use allot of energie.
i'm not shure how long my tablet runs if its in standby, but it is longer then yours.
No task killer running, I do that manually...
But I've uninstalled chrome beta and since last charge, 14 hours ago, tablet has lost 11%...
Kind of bizarre...
Hey guys,
as you know I am currently working on a CM port for the Viewpad 7e, I am uploading for now a clean stock rom with important Google Apps.
This ROM is not rooted but can be rooted easily with Gingerbreak which can be found here -> http://forum.xda-developers.com/showthread.php?t=1049944
How to Install Guide (same like original ROM)
Added Feature
- USB-Port Charging
- 160DPI Density (through build.prop Modification)
- Google Package for Gingerbread (20110828)
- latest Play Store 3.10.10 & full Market Access (Device will be recognized as Galaxy Tab & Android 2.3.7)
Removed
- Viewsonic/ViewPad Bloatware Apps
- Viewsonics/ViewPad Media
- Fringe, Sketcher & loads more unneccesary software which can be added back if needed through Play Store
User reported Bugs:
- Install Problems (see Post for the fix)
- Google Play Issue (see Post for the fix)
Future Changes
- SetupWizard to Setup Google Account on first Startup
- 2nd Rooted ROM Version
- Screenshot Power Option/Shortcut
- more Setting Options (CM port)
Thanks to
KRisM79 for build.prop for Full Market access
Download Link
v1 (01172013 - based on 11252011) - http://www.multiupload.nl/X5IHYVQBTQ
Step By Step Install Guide
1. Confirm that there is no other Custom ROM or ViewPad 7e firmware file in the micro SD card.
2. Copy the new Custom ROM file to the micro SD card root folder.
3. Turn off the ViewPad 7e and insert the micro SD card to the device.
4. Keep pressing the volume up and power button at the same time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Until the ViewSonic logo flashes, release the buttons.
6. The device will automatically start firmware upgrade.
7. After the firmware upgrade successfully, the ViewPad 7e will automatically shutdown. And you can manually boot it up to configure the basic settings.
NOTE!!!
Please make sure the battery power is more than 30% or the AC adapter is plugged in.
This flashing method will erase all data on your ViewPad 7e.
reserved
the viewpad 7e is not a viewpad7 or a variant of the viewpad7, its a totally different HW base, this thread is in the wrong area.
Error
I can´t install that!
@flez1966: there is no other forum for the 7e and posted cuz many of the 7e users are browsing these forums for their device anyway
@cpbaixo: what error message do u get, which firmware is your 7e running at the moment - please describe your problem, thanks
Found a new Firmware for the 7e, 11282011 - wont be able to work further on this project as I am on holidays back in Germany and left my Viewpad back in London - if anybody is really interested then I would take my time to work on a new build else would wait til I am back in London ...
If somebody should have an issue with applications which can't be installed from play store due to memory problems - try cache fixer from play store or as apk download - will try to fix that issue in next release
CACHE FIXER DL -> https://play.google.com/store/apps/details?id=tk.rede.cacheFixer
And yea I hope will get some more support on this project else i doubt if anyone would be using this - also let me know if you want a pre-rooted ROM in future ...
Sent from my SGH-I897 using xda app-developers app
Sorry for something only now, i can´t install because my ViewPad is not the 7e, is the 7 only!
receiving following error:
assert failed: run_program("/tmp/fuse","userstorage","format")
E:Error in /sdcard0/F70_VSEI_S_W_C_01172013.zip
(Status 7)
Click to expand...
Click to collapse
any ideas?
Solution:
Missplaced zip. after putting it into the right place everything worked fine! =)
---------- Post added at 09:24 PM ---------- Previous post was at 08:41 PM ----------
it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
cpbaixo said:
Sorry for something only now, i can´t install because my ViewPad is not the 7e, is the 7 only!
Click to expand...
Click to collapse
This ROM is for ViewPad 7e only
Enovie said:
[/COLOR]it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
Click to expand...
Click to collapse
received many PM on that issue, thanks to batrat44 for finding the issue:
batrat44 said:
HI DrSauerkraut,
Can not add a google account. I was obliged to change the file "GoogleServicesFramework.apk" and it solved the problems.
Rom is Rooted, everything works, very fast without bloatware.
more than bug with micro sd card, and the root
whereas before there were bugs on the stock fimware
Sorry for my english pitiful, I'm French.
Click to expand...
Click to collapse
also if you should encounter some problems with the install progress see following solution of mladen:
mladen.perisic said:
..., I wanted to share some experiences regarding installation process. I downloaded your ROM and I had some problems installing it (or stock ROM for that matter).
Since I'm authorized Viewsonic service engineer I got stock ROM from them (which is same as the one you based your ROM on) and I used it many times to repair many Viewpad's 7e. Every time it worked flawlessly, but on this unit in particular, it did not. There were messages regarding formatting unsupported file system (ext3) and not recognizing mSD card or not founding update on card at all (most of those problems are affecting your ROM too). After much of experiencing I found procedure which worked:
1: Extract update package
2: Edit normal update script and comment lines regarding formatting userstorage
3: Compress everything into update package again
4: I am not sure, but this step could be true: rename package to original name (F70_...). Even your ROM refused to flash if I change the name to update.zip or anything else
5: Remove your mSD card and turn on your tablet and connect it to computer.
6: Enable USB storage mode and format (!) internal iNAND.
7: Copy update package to the internal memory and disconnect the tablet.
8: Turn off USB storage mode and turn off the tablet.
9: Start update process by holding Volume+ and Power button.
Click to expand...
Click to collapse
I am still away from my "equipment" and the ViewPad, will continue on the developement from the 11th feb hopefully.
thanks again for all your support and hopefully i can get some more work done in future, also I am considering doing a 2nd rooted version to safe you guys another step. so in future there would be a rooted and non-root version of this ROM, and of course a bugfixed one - therefore i need your help guys!
Dr Sauerkraut
DrSauerkraut said:
Found a new Firmware for the 7e, 11282011 - wont be able to work further on this project as I am on holidays back in Germany and left my Viewpad back in London - if anybody is really interested then I would take my time to work on a new build else would wait til I am back in London ...
Click to expand...
Click to collapse
Thanks to dpirotto for the later ROM Update (http://forum.xda-developers.com/showthread.php?t=2188781), downloading at the moment so will see what kind of changes have been made - will upload a newer version of this rom with Bugfixes soon ...
Install CWM
How to install CWM on this ROM?? i am unable to install any cwm version. it said "error scanning partitions: No such file or directory"
ic92 said:
How to install CWM on this ROM?? i am unable to install any cwm version. it said "error scanning partitions: No such file or directory"
Click to expand...
Click to collapse
Still working on this, but as I had my exams the last month I was too busy to work on this project. Basically we need to repartition the device or find a way to get CWM onto the device without repartitioning.
DrSauerkraut said:
Quote:
Originally Posted by Enovie View Post
[/COLOR]it seems that the google account is missing.
i can't create one and everytime i want to add an account it only opens Exchange Account stuff.
any ideas?
received many PM on that issue, thanks to batrat44 for finding the issue:
Quote:
Originally Posted by batrat44
HI DrSauerkraut,
Can not add a google account. I was obliged to change the file "GoogleServicesFramework.apk" and it solved the problems.
Rom is Rooted, everything works, very fast without bloatware.
more than bug with micro sd card, and the root
whereas before there were bugs on the stock fimware
Sorry for my english pitiful, I'm French.
Click to expand...
Click to collapse
So... I have to change the GoogleServicesFramework.apk? And what exactly do I have to do with it?
Hey Guys,
sorry for the long delay as I was busy with personal stuff. Right now I have got more time to work on this ROM and I will definitely get Android 4 running on the VP7E as I have got enough informations to get a successfull result on it. The only issue right now that I have to find my tablet as I have missplaced it to get the work done and also I need at least 2 Tester who are able to cooperate quite quick with me so I can build a stable ROM before Uni starts again in September.
For the rest of you guys, you won't have to wait for too long anymore. Possibly few weeks to go for a open-beta release.
DrSauerkraut
PS: Interested Tester please inbox me!
Any news about your work?
I'm very interested.
Greetz Hypno
++++++++++++++++++++
Irgendwelche Neuigkeiten zum Rom?
Ich wäre wirklich interessiert
What happened with the update to android for Viewpad 7e?
Nabi 2 ROOT Installer
Use this script to install TWRP Recovery, ROOT, and Google apps to your Nabi 2 tablet. Step by step instructions are included within the installer. While there is another more complex script (by aicjofs, and which was offline when I originally needed it), this one is smaller and simpler. It is based on jmzrootpackage, and I had some inspiration from Victoria's video. I started this with the intention of only making things just a little bit smoother. I ended up adding more than I had originally intended. This installer contains information through each step to help guide you through the rooting process. Linux instructions can be found here.
NOTE: (Jan, 2015) There are newer versions of the Nabi on the market now, and I do not have any with which to test this script, only the original Nabi 2. As a result, it is unlikely that this will get any further updates. The newer models most likely will not work very well, or simply not work at all with this script. If you are capable and so inclined, I officially invite you to use this script in your own rooting project. Just give credit where credit is due.
Summary:
Helps guide you step by step
ROOT your Nabi 2
Install Google apps
Will NOT wipe your data
No Android upgrading message
No wifi issues
Install TWRP
Simple update to TWRP
Reported to fix touch screen issues in TWRP
Includes ADB files
Automatically backs up before rooting
Includes PdaNet driver installer
New Remove Wings (for Nabi 2 v2.1+)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Check For Proper Drivers
Use this option to check if your computer has the PdaNet drivers communicating with your Nabi2. This is a simple check for existing connectivity. Nothing will be changed. This will also display your Nabi 2 serial number.
2. Install PdaNet Driver
In order for this installer to properly interface with the Nabi 2, you must have the PdaNet driver installed on your computer. This option will start the PdaNet driver installation process for you. Requires Windows 8/7/Vista/XP (32 or 64 bit). If you already have the drivers installed, you can skip this step.
3. Install Recovery and Root
This will install the touch enabled TWRP recovery to the tablet, as well as copy over the rooting file. Use the TWRP install button to select the rooting file and apply.
4. Install Google Apps
After your Nabi 2 is rooted, use this option to install Google apps. After it is copied over, use the TWRP install button to select the Google apps file and apply. Reboot the Nabi 2 (parent mode) and then update the Google apps to the current version of Google Play.
5. Update TWRP
Here you can choose from two experimental versions of TWRP, or drop-in your own custom version. You are given the options of testing and installing. That way you can make sure it works with your Nabi 2 before you flash it.
6. Remove Wings
This option only applies to Nabi 2 system version 2.1+. With version 2.1, Fuhu filled up the /system partition. As a result, there is not enough room to add Google Apps to the Nabi 2. Removing Wings will free up nearly 105 MB, and will allow Google Apps to be installed. You have the option of removing the files with or without backing them up first.
9. Exit
As you might expect, this closes the program window.
Misc. Notes:
Tested with US edition; With other versions you mileage will vary...
Credits:
jmztaylor - wrote the original root your nabi 2 script
aicjofs - TWRP for Nabi 2, and NabiLabs
t499user - fixed the Android is upgrading on startup bug
Dees_troy - TWRP help
Victoria - made the video that inspired me to work on this script
Update Notes:
Tweaked the install script
Updated TWRP Recovery to v2.6.0.0
Included experimental TWRP recoveries 2.6.0.0v2, 2.6.1.0
Removed old TWRP recoveries
Updated PDAnet installer to v4.12.6.0
Included fix for Nabi2 v2.1 no free space issue
Organized some internal files
Beta2 Notes:
I have regressed the updated *.zip files to the originals, and the rest should work as expected now.
Download Mirrors:
MN2RI v1.5.0 Beta2 (78.6 MB)
datafilehost.com
tbd
MN2RI v1.5.0 Beta (92.5 MB)
datafilehost.com
tbd
MN2RI v1.00 (65.9 MB)
datafilehost.com
filecloud.io
Click to expand...
Click to collapse
Wow, that was easy. Now I need to figure out how to move apps to the sd card.
Thanks for this again.
Sent from my Nexus 4 using Tapatalk 2
I'm getting my Daughter a Nabi 2 in the coming weeks. I'll do a video on this!
Wow...
Thanks so much for this. Starting my second one as soon as I post this. Sooo easy to use this - even for this noob. Now these are full blown tablets...
Does this method allow you to purchase and.or download apps from the Google Play store or is it just installing the Google Apps that have been known to work on the Nabi (sans purchasing apps from Play)?
Thanks
it worked!
cgendreau said:
Does this method allow you to purchase and.or download apps from the Google Play store or is it just installing the Google Apps that have been known to work on the Nabi (sans purchasing apps from Play)?
Click to expand...
Click to collapse
i've used this method and worked like a charm, and yes now you have google play and can use it, instead the other crappy stores
Thanks for sharing this.
Any idea if this would work on the first nabi?
Also does this leave the parent / nabi mode intact?
This topic may be dead but I just ran this script for my niece's Nabi 2 to get some better games for her and everything worked except for the Gapps. Flashed 3 times using the script and once using the custom recovery(flashed Gapps.zip). Can someone please help?
I followed all the instructions.
SlimMan said:
Thanks for sharing this.
Any idea if this would work on the first nabi?
Also does this leave the parent / nabi mode intact?
Click to expand...
Click to collapse
I do not have access to the original Nabi, so I cannot confirm whether it will work or not. Most likely it would not work. As for the parent/nabi mode, YES. The process used in this script does not in any way delete or remove your data or Nabi 2 system information. It only adds ROOT and Google apps. Once you have root you could remove whatever you want.
necromonger89 said:
This topic may be dead but I just ran this script for my niece's Nabi 2 to get some better games for her and everything worked except for the Gapps. Flashed 3 times using the script and once using the custom recovery(flashed Gapps.zip). Can someone please help?
I followed all the instructions.
Click to expand...
Click to collapse
This topic is not dead, I've just been unusually busy this year.
Have you tried wiping the cache/dalvik before flashing GApps? Please post back with some information about your Nabi 2. What is your Nabi kernal #? Have you verified that root is functioning correctly? Is there enough free space available on your Nabi 2 to allow installation of GApps? Is there anything else that you have attempted but did not list above?
mehtuus said:
I do not have access to the original Nabi, so I cannot confirm whether it will work or not. Most likely it would not work. As for the parent/nabi mode, YES. The process used in this script does not in any way delete or remove your data or Nabi 2 system information. It only adds ROOT and Google apps. Once you have root you could remove whatever you want.
Click to expand...
Click to collapse
Firstly thanks for the reply. Secondly the Nabi in question just received a update in the software and while I was under the impression that it was a nabi one the software clearly showed that the file was Nabi2 update. So with that being said, does this root installer still work on the latest update?
SlimMan said:
Firstly thanks for the reply. Secondly the Nabi in question just received a update in the software and while I was under the impression that it was a nabi one the software clearly showed that the file was Nabi2 update. So with that being said, does this root installer still work on the latest update?
Click to expand...
Click to collapse
With the latest update (2.1), there seems to be some changes in the Nabi2 that prevent the Google apps from properly loading. Everything else seems to work fine (meaning your Nabi2 still gets rooted). There are some custom rom's in the wiki that include root and gapps.
I am looking into a fix regarding this. I have a possible work around, but it requires manually moving some files. Although, I have not tested it yet so it may not work.
mehtuus said:
With the latest update (2.1), there seems to be some changes in the Nabi2 that prevent the Google apps from properly loading. Everything else seems to work fine (meaning your Nabi2 still gets rooted). There are some custom rom's in the wiki that include root and gapps.
I am looking into a fix regarding this. I have a possible work around, but it requires manually moving some files. Although, I have not tested it yet so it may not work.
Click to expand...
Click to collapse
I just bought nabi 2 for my kid, I've updsted via the tabet update and then start you software' everything went right exept I can't see google play icon, then I've installed play store from everything nabi website and from internet but it keep crashed and fc. Please can u help me even if with hard way?
Thanks a lot
majedalanni said:
I just bought nabi 2 for my kid, I've updsted via the tabet update and then start you software' everything went right exept I can't see google play icon, then I've installed play store from everything nabi website and from internet but it keep crashed and fc. Please can u help me even if with hard way?
Thanks a lot
Click to expand...
Click to collapse
Are you using Nabi2 kernal 2.1.27? Please post a link to where you got your Gapps so that I can take a look.
Gapp is from your software, please check attached file for version
majedalanni said:
I just bought nabi 2 for my kid, I've updsted via the tabet update and then start you software' everything went right exept I can't see google play icon, then I've installed play store from everything nabi website and from internet but it keep crashed and fc. Please can u help me even if with hard way?
Click to expand...
Click to collapse
majedalanni said:
Gapp is from your software, please check attached file for version
Click to expand...
Click to collapse
Sorry, I should have been more clear. I meant the "play store" that you said that you installed from the "everything nabi" website. I need the link to there, so that I can see what it is that you installed. If they have more than one version listed there, then I need to know which one you downloaded and installed.
You have Nabi2 Product version 2.1-release-keys
I noticed from your screenshot that the Nabi2 has a new entry: Edition NABI2-NV7A-US which does not exist yet on the one that I have here (which is much older).
Have you done anything to verify that you have properly functioning root on the Nabi2?
I remember that screen cover. A little window cleaner, and those white lines come right off. I actually used that as the screen protector for a while. Until I got an actual screen protector that fit the entire screen completely.
Simple answer is the system partition is full. Gapps and full 2.1.27 don't fit. Have to delete something to have gapps fit on /system. I discuss a bit of it here:
http://forum.xda-developers.com/showpost.php?p=45866724&postcount=1647
That solve my problem, thanks a lot for you both !
aicjofs said:
Simple answer is the system partition is full. Gapps and full 2.1.27 don't fit. Have to delete something to have gapps fit on /system. I discuss a bit of it here:
http://forum.xda-developers.com/showpost.php?p=45866724&postcount=1647
Click to expand...
Click to collapse
A new Beta version (1.5.0) has been posted. It addresses the full partition issue with the Nabi2 v2.1+ update, and introduces updated *.zip files as the beta element. For those interested, please read the updates on the first post, test, and post back your experience with it.
More would have been included, but due to unrelated RL issues I had to save the rest for a future update.