Hey Everyone,
I am having troubles with the exclamation point error. Odin locked up in the middle of a flash and now I can't reboot the phone. The restart doesn't work, and I can't get back into download mode. Anyone have any suggestions?
DaSmittyman said:
Hey Everyone,
I am having troubles with the exclamation point error. Odin locked up in the middle of a flash and now I can't reboot the phone. The restart doesn't work, and I can't get back into download mode. Anyone have any suggestions?
Click to expand...
Click to collapse
Hey, try (WITH THE PHONE PLUGGED IN) turning off the phone until you get to the charging battery screen (you ought to be able to accomplish this by pulling your battery, popping it back in and plugging your vibrant into your computer via the data cable until you see the charging battery icon) From here, press volume up and down, and power all at once (or try volume +, and power)...As soon as the screen turns black, release your power button. With a bit of luck, and the correct key combo, BAM download mode. ^^
Xenoism said:
Hey, try (WITH THE PHONE PLUGGED IN) turning off the phone until you get to the charging battery screen (you ought to be able to accomplish this by pulling your battery, popping it back in and plugging your vibrant into your computer via the data cable until you see the charging battery icon) From here, press volume up and down, and power all at once (or try volume +, and power)...As soon as the screen turns black, release your power button. With a bit of luck, and the correct key combo, BAM download mode. ^^
Click to expand...
Click to collapse
Ya I had tried that, unfortunatly it seems all roads lead to the exclamation point. Even pulling the battery, plugging the phone in and holding -, + and -, or just + doesn't even take me to download
If ODIN still recognize the COM port then you can still try flashing. Which ODIN image are you using and did you try it with the PIT file? Try a different Odin image because yours might be corrupt. Also you should try with a different cable.
Here is a link to some Odin images: http://d-h.st/users/Big Dog KMc
Sent from my Galaxy Nexus
^ This guy is on the money. If Odin recognizes your device, your golden. I often like to refer people to this excerpt from my MIUI guide...
"SOFT" BRICKED WHILE USING ODIN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are getting a "Phone.. ! ..Computer" image (seen above) when booting phone, yes, you are bricked but it is reversible! Just follow these steps...
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
Sent from my SGH-T959
N00B_IN_N33D said:
^ This guy is on the money. If Odin recognizes your device, your golden. I often like to refer people to this excerpt from my MIUI guide...
Sent from my SGH-T959
Click to expand...
Click to collapse
And the above is correct reading the stickies and tutorials is apparently underrated.
Related
Hey there.
First post. I used Odin 3.1 to flash Froyo 2.2 on my Vibrant that was running Eclair 2.1, and Odin showed a successful completion. The phone then turned off and instead of re-booting, has become totally, utterly unresponsive.
I have tried a number of ways to get it to work, or at least get in to Download or Recovery mode, including the "remove everything, then re-insert battery while holding down volume up/down keys" and any number of key combinations. I've trowled the forum and haven't found a single solution for a completely unresponsive Vibrant. even the USB jig seems to be for those phones that at least show the Vibrant Logo or the "S" at start-up, while mine doesn't do anything.
The only encouraging thing has been posts by people who claim to have lefft their unresponsive Vibrants plugged in for several hours only to have them miraculously revive, but that seems like a long shot to me.
Have I managed to do the impossible and brick an unbrickable phone? I'd really appreciate help as I just got the phone last week and don't want to declare it a dead loss so soon.
Cheers!
Utterly, haha
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thinking.. above was a joke...
What ODIN files did you flash? Link to them?
What version of ODIN, the latest?
When you say nothing... you mean you can't see anything on the phone, regardless of the action?
rofl OMG is that chick half naked hahaha seriously is she in her undies milking a cow WTF! LMFAO!
- so the phone won't turn on huh?...... no power at all?....... how about plug in the cord, do you see the batt charge?
haha utterly.. when you say put in the battery while holding the volume keys, did you put in the battery or plug in the USB??
I had to replace mine. Been good ever since.
Sent from my GT-I9000 using XDA Premium App
Here's the long story. My phone was getting the 'device unrecognized' error in Kies and Kies Mini, so I used Odin 3.0 to flash it, using the "T959UVKA6_REV05_home_low_CL860813.tar.md5" file.
After flashing, my phone wouldgo into recovery mode and the following error.
"E:Cant mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:cant mount DBDATA:
copy default media content failed."
Next I followed the steps detailed in this post . When I flashed my phone according to the 'Gauranteed Solution', my phone turned off at the end of the flash and has stayed off ever since.
And when I say nothing, I mean nothing. No battery symbol, no sound, no Samsung Vibrant logo, nothing. Just a blank screen.
I tried plugging in the phone and then putting in the battery with the volume keys pressed and I also tried it without plugging in the USB. Either way, nothing happens.
As you can probably guess, I'm a n00b of the first order and I fear I might have killed my phone.
If you do manage to revive your phone back.. You better flash roms via cmw. Not that odin isn't great but cmw never caused any problems(to me).
Make a jig to force download mode then reflash stock os and install rom manager to flash roms. P.m for more Info.
Sent from my SGH-T959 using XDA Premium App
Thats funny, the last post in the link you referenced is someone having the same problem as you........ why would you try to do that? and the .tar is some I9000 file being that the (fix) was in the I9000 forum. Neither of these probably have anything to do with your problem now i just thought it was funny. I mean why wouldn't you just use the T959UVJFD.tar in ODIN?
It seems that the "E:cant mount" error is a fairly common issue and from what i am seeing alot of the people having this issue after using samsung kies are getting replacements fairly easily although it is a last resort for many. I would not think its an issue with your drivers or anything like that, probably just ODIN being weird. Don't give up on ODIN i would assume that it will recognize the phone eventually as most "DEAD" vibrants do after time. I'll keep looking into it for you. Hope you find a fix soon. Good luck!
You can also restart the computer and f8 and turn off driver signing and see if that helps. Once again I don't mind helping on a more personal basis. P.m me.
Sent from my SGH-T959 using XDA Premium App
have you ever actually tried a usb jig ?
http://cgi.ebay.com/ws/eBayISAPI.dl...83134&ssPageName=STRK:MESELX:IT#ht_723wt_1139
Using Odin, I accidentally repartitioned my phone and didn't flash anything else besides the PIT file. What do I do? My phone doesn't turn on when plugged into the computer or the wall outlet. Is there anything I can do?
My phone is pretty much done, isn't it?
What the hell.... Anyways.... Pit always repartitions your phone. Did you flash anything after that? Details are lacking.
You can't get back into download mode to reflash?
DevinLeFevere said:
What the hell.... Anyways.... Pit always repartitions your phone. Did you flash anything after that? Details are lacking.
Click to expand...
Click to collapse
No, because I wasn't able to use the phone at all after. The phone is dead. It won't do anything. There is no sign of life. I repartitioned it with a pit file and hit start. After that, the phone wouldn't work at all.
Because.... you need to follow steps and read.
You need to start over.... Odin the pit... then follow the steps and odin the rom you want to flash. Your phone isn't gone... yet.
Follow: http://forum.xda-developers.com/showthread.php?t=1124391
DevinLeFevere said:
Because.... you need to follow steps and read.
You need to start over.... Odin the pit... then follow the steps and odin the rom you want to flash. Your phone isn't gone... yet.
Follow: http://forum.xda-developers.com/showthread.php?t=1124391
Click to expand...
Click to collapse
But will this work even though Odin can't see my phone, since my phone acts as if there's no battery? It doesn't function at all. So when I plug it in, nothing happens and Odin never sees my phone.
Actually, my phone is responding all of a sudden, so now I'm flashing my phone with Odin.
Why is Odin stuck at this part of the flash?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yomama07024 said:
Why is Odin stuck at this part of the flash?
View attachment 813654
Click to expand...
Click to collapse
You have to redo it... Sometimes it doesn't completely flash the first time.
Has anyone seen John Connor?
yomama07024 said:
Why is Odin stuck at this part of the flash?
View attachment 813654
Click to expand...
Click to collapse
Or try a different odin package.
"the relentless pursuit of the perfect rom"
or reboot computer, or try different usb port, or try different cable.
Sent from my SCH-I500 using xda premium
yomama07024 said:
Actually, my phone is responding all of a sudden, so now I'm flashing my phone with Odin.
Click to expand...
Click to collapse
What did you do? I have the same problem. It didnt response at all.
you could also try something totally different and try heimdall with a different usb port, if that doesn't work then I'm definitely not sure what else you could try.
did you leave your battery in when you went into download mode to flash the stock rom? if you did, take the battery out, hook up the cable to a usb port hold down the - volume button along with the power button and it should boot into download mode
ztotherad said:
you could also try something totally different and try heimdall with a different usb port, if that doesn't work then I'm definitely not sure what else you could try.
did you leave your battery in when you went into download mode to flash the stock rom? if you did, take the battery out, hook up the cable to a usb port hold down the - volume button along with the power button and it should boot into download mode
Click to expand...
Click to collapse
Thanks for help, it worked.
forserg said:
Thanks for help, it worked.
Click to expand...
Click to collapse
no problem, sir! I'm glad to help
I've been searching XDA and Google for months now and I haven't found anyone else with this precise issue. I'm very tech savvy, but this is just beyond me! What say you? Will you help me in my quest to diagnose my device and possibly find a cure?
Listed below is what occurs when the USB Cable is connected, either via PC or the Wall.
While USB Cable is disconnected:
Pressing or holding any of the buttons, together or individually, does absolutely nothing. (But the battery can't be dead. I've had the thing on charge all night!)
When USB Cable is connected:
http://youtu.be/J8FJSo_S7cQ
Without pressing anything, the device powers on into download mode and continues to reboot itself every few minutes.
Holding the power button (or all buttons together) reboots it back into download mode to repeat what I just described above.
Pressing any/all buttons at this point does nothing.
When I disconnect the USB Cable from the device while in Download Mode, the device shuts off after about 20 seconds.
I have seen this on occasion, but nothing different happens:
(I'm aware this means forced download mode.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm able to use Odin completely normally and flash anything successfully as well. Yet it just reboots back into download mode. And if I leave it alone while connected to my PC with Odin up, this is what it looks like:
I've "successfully" installed Stock ROM, Kernel and PIT files. Nothing changes! I've also tried one-click unsoftbricker, heimdal, calling it names, begging it to work. Am I crazy or...is this thing done for?
Have you tried repartitioning it?
By clicking that check box in Odin? Yes.
Ah, you must've hardbricked your Galaxy.
http://forum.xda-developers.com/showthread.php?t=1496360 < See if anything in that topic helps you.
You need to flash a ROM that has boot loaders in it...
When you use the unbrickable resurector, it flashes a boot loader that always boots to download mode. From download mode, you can flash a FULL rom, that will replace the boot loader. Then it will boot normally.
TheKryptonite said:
Ah, you must've hardbricked your Galaxy.
http://forum.xda-developers.com/showthread.php?t=1496360 < See if anything in that topic helps you.
Click to expand...
Click to collapse
Thanks, I've been suspecting hard brick. I've seen that thread before, it could really use some reorganizing. I can barely follow it.
Meticulus said:
You need to flash a ROM that has boot loaders in it...
Click to expand...
Click to collapse
That would make sense but which ROMs would those be?
This is a Russian ROM but it should have boot loaders.
http://www.4shared.com/zip/vxHoJ8E0/G70JKKE3_STOK_222RU_.html
Let me know how it goes...
Downloading now. I'll have to try it tomorrow on spare time. Really hoping this works. Thanks for giving me some hope, I really thought this thing was done for!
It's not hard bricked... that ROM will restore it. But after you flash that rom , you'll need to flash a different Rom for your region...
Meticulus said:
It's not hard bricked... that ROM will restore it. But after you flash that rom , you'll need to flash a different Rom for your region...
Click to expand...
Click to collapse
I never even heard of a "Full" ROM before. The problem I was having was apparently my bootloader - or lack-there-of.
You saved my Galaxy Player's life! Thank you very much!
I'm happy to say that this case is closed!
I am going to favorite this thread. You never know when you'll need some good info like this.
Ironically, my GP just managed to softbrick -_- I may be f'd.
Edit: Thankfully, I managed to fix it. Whew!
Oops sorry about the caps guys.
So i replaced the digitizer / lcd assembly on an xt912 and before screwing it all back together I wanted to test the lcd.
It's working fine, it's just stuck in M Motorola bootloop and it will go into ap fastboot mode stating PLEASE CONNECT USB etc. No other error...
I don't have the special cable,and keep in mind I don't have it fully assembled.
I do have another xt912 with the battery charged but has a bad lcd as well.
The phone In question - I have no idea if it booted before the lcd broke.
I can't get to recovery mode. Tried numerous times
wondering if I should just use the guts from the other xt912
Can i take out a charged battery from another razr to get this to boot?
Do you think I broke the motherboard?
Do you think this may be stuck in ap fastboot simply because the screws aren't back I yet?
I truly don't feel like downloading sdk kit all over again and flashing this etc etc.
dovedescent7 said:
Oops sorry about the caps guys.
So i replaced the digitizer / lcd assembly on an xt912 and before screwing it all back together I wanted to test the lcd.
It's working fine, it's just stuck in M Motorola bootloop and it will go into ap fastboot mode stating PLEASE CONNECT USB etc. No other error...
I don't have the special cable,and keep in mind I don't have it fully assembled.
I do have another xt912 with the battery charged but has a bad lcd as well.
The phone In question - I have no idea if it booted before the lcd broke.
I can't get to recovery mode. Tried numerous times
wondering if I should just use the guts from the other xt912
Can i take out a charged battery from another razr to get this to boot?
Do you think I broke the motherboard?
Do you think this may be stuck in ap fastboot simply because the screws aren't back I yet?
I truly don't feel like downloading sdk kit all over again and flashing this etc etc.
Click to expand...
Click to collapse
If AP fastboot doesn't say low battery, then it's not a battery issue, and a fastboot cable is not needed.
But it's not uncommon that firmware needs to be flashed after a hardware repair.
See Flashing with RSD Lite in the index
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT907 using Tapatalk
Much appreciated . YeS it does say low battery sorry about that
dovedescent7 said:
Much appreciated . YeS it does say low battery sorry about that
Click to expand...
Click to collapse
Try Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still preset and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
http://goo.gl/QllP1j
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my XT907 using Tapatalk
this i all i can get to guys
OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
I now have the triangle and can not boot the phone
bbiigg said:
OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
Click to expand...
Click to collapse
Download Kies and update, but if it doesn't work or you want to have the ability to keep flashing roms(will wipe data):
1)Download and unzip odin
3)Turn off you s4
4)Hold the power, home and Volume down keys if you boot into something like the picture continue or try again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Use you volume keys to press continue
6)Download the .tar from this forum(odexed or deodexed try both) or if the link doesn't work search xda for sch-i545 OF1 tar
7)Right click odin and run as administrator
DO NOT CHANGE ANYTHING IN THE PIT AND OPTIONS Section
8)Check the AP button(PDA in some versions of Odin)
9)Press the AP/PDA button and find the rom that you downloaded
Look at this image for reference, you should have something where each of the arrows point.
10)Press start(not liable for anything this may cause)
11) See if it works!
Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os
bbiigg said:
Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os
Click to expand...
Click to collapse
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.
whowatchlist said:
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.
Click to expand...
Click to collapse
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.
bbiigg said:
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.
Click to expand...
Click to collapse
Can you send a screenshot of your computer when on Odin and a picture of your phone? It would really help.
not sure how to do that. My tablet took some terrible pics.
Well i now have a different screen now that says " Samsung Custom" and it just staays there.
However! If i do volume up,power,home and wait a sec for first vibration and immediately let go of power button while holding volume up and home key i get my upper left hand corner booting menu. I can see my backups on the ex sd and a hyper ro zip file but i cant flash them. it shows something in each backup "data.ext.win000.md5 and 001.md5" as well as "system.ext4. same endings" but cant flash them. I get a failed to mount error.
in the upper left hand corner in red it says
Android System Recovery<3>
KOT49H.I545VRUFNC5
Choose a package to install:
/sdcard
ansd then a boot menu. Is this a good sign?