No internet, no work. Really need help. - Verizon Samsung Galaxy S 4

OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
I now have the triangle and can not boot the phone

bbiigg said:
OK. So i started with a Galaxy S4 Verizon 4.4.2 (bought refurbished, no sim, not activated).
As soon as i put the sim in at verizon store and started using phone all was good. I immediately root the phone w Towelroot. Use Safestrap and flash the Hyperdrive Rom. Excellent. In my exitment i try the Super6 Rom. Iam now at
Android 5.0.2
baseband i545vrugoc1
kernal 3.4.0-4584173
build gogolies super6-.i545vrugoc1
I can make and receive calls but have no internet and no texting
I cant work until this is fixed. Is ther any hope for me?
Click to expand...
Click to collapse
Download Kies and update, but if it doesn't work or you want to have the ability to keep flashing roms(will wipe data):
1)Download and unzip odin
3)Turn off you s4
4)Hold the power, home and Volume down keys if you boot into something like the picture continue or try again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Use you volume keys to press continue
6)Download the .tar from this forum(odexed or deodexed try both) or if the link doesn't work search xda for sch-i545 OF1 tar
7)Right click odin and run as administrator
DO NOT CHANGE ANYTHING IN THE PIT AND OPTIONS Section
8)Check the AP button(PDA in some versions of Odin)
9)Press the AP/PDA button and find the rom that you downloaded
Look at this image for reference, you should have something where each of the arrows point.
10)Press start(not liable for anything this may cause)
11) See if it works!

Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os

bbiigg said:
Didnt work. whatever i did a lil while ago with odin messed it up and now i have the yellow triangle and the phone wont turn off or go into os
Click to expand...
Click to collapse
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.

whowatchlist said:
Have you tried pressing volume up when at that screen? Or just pull the battery to turn off.
Click to expand...
Click to collapse
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.

bbiigg said:
I can take the battery out to shut it off but as soon as the bettery goes in it turnes on automatically. I can only go into download mode and connect to odin and thats it.
Click to expand...
Click to collapse
Can you send a screenshot of your computer when on Odin and a picture of your phone? It would really help.

not sure how to do that. My tablet took some terrible pics.

Well i now have a different screen now that says " Samsung Custom" and it just staays there.
However! If i do volume up,power,home and wait a sec for first vibration and immediately let go of power button while holding volume up and home key i get my upper left hand corner booting menu. I can see my backups on the ex sd and a hyper ro zip file but i cant flash them. it shows something in each backup "data.ext.win000.md5 and 001.md5" as well as "system.ext4. same endings" but cant flash them. I get a failed to mount error.
in the upper left hand corner in red it says
Android System Recovery<3>
KOT49H.I545VRUFNC5
Choose a package to install:
/sdcard
ansd then a boot menu. Is this a good sign?

Related

exclamation point error

Hey Everyone,
I am having troubles with the exclamation point error. Odin locked up in the middle of a flash and now I can't reboot the phone. The restart doesn't work, and I can't get back into download mode. Anyone have any suggestions?
DaSmittyman said:
Hey Everyone,
I am having troubles with the exclamation point error. Odin locked up in the middle of a flash and now I can't reboot the phone. The restart doesn't work, and I can't get back into download mode. Anyone have any suggestions?
Click to expand...
Click to collapse
Hey, try (WITH THE PHONE PLUGGED IN) turning off the phone until you get to the charging battery screen (you ought to be able to accomplish this by pulling your battery, popping it back in and plugging your vibrant into your computer via the data cable until you see the charging battery icon) From here, press volume up and down, and power all at once (or try volume +, and power)...As soon as the screen turns black, release your power button. With a bit of luck, and the correct key combo, BAM download mode. ^^
Xenoism said:
Hey, try (WITH THE PHONE PLUGGED IN) turning off the phone until you get to the charging battery screen (you ought to be able to accomplish this by pulling your battery, popping it back in and plugging your vibrant into your computer via the data cable until you see the charging battery icon) From here, press volume up and down, and power all at once (or try volume +, and power)...As soon as the screen turns black, release your power button. With a bit of luck, and the correct key combo, BAM download mode. ^^
Click to expand...
Click to collapse
Ya I had tried that, unfortunatly it seems all roads lead to the exclamation point. Even pulling the battery, plugging the phone in and holding -, + and -, or just + doesn't even take me to download
If ODIN still recognize the COM port then you can still try flashing. Which ODIN image are you using and did you try it with the PIT file? Try a different Odin image because yours might be corrupt. Also you should try with a different cable.
Here is a link to some Odin images: http://d-h.st/users/Big Dog KMc
Sent from my Galaxy Nexus
^ This guy is on the money. If Odin recognizes your device, your golden. I often like to refer people to this excerpt from my MIUI guide...
"SOFT" BRICKED WHILE USING ODIN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are getting a "Phone.. ! ..Computer" image (seen above) when booting phone, yes, you are bricked but it is reversible! Just follow these steps...
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
Sent from my SGH-T959
N00B_IN_N33D said:
^ This guy is on the money. If Odin recognizes your device, your golden. I often like to refer people to this excerpt from my MIUI guide...
Sent from my SGH-T959
Click to expand...
Click to collapse
And the above is correct reading the stickies and tutorials is apparently underrated.

Samsung Galaxy s3 NOT ROOTED stuck at Logo Screen

I know this has been asked dozens if not hundreds of times, but it seems everyone has bricked their phone by rooting.
My phone has never been rooted, and I have had it working fine for at least 9 months now.
It was working all day and when I got home from school I plugged it into the charger the same as every night and when I woke up it was stuck on the "Samsung Galaxy III" screen.
I have no idea how to fix this please help, I cannot get into recovery mode it just says "recovery 'something'" and disappears quickly then shows the Logo Screen again before shutting off.
I can get into download mode and I guess I have to start from there.
I don't want to do a wipe without at least getting into it in safe mode somehow and backing up some things, please help.
Oh and if it helps no new software was added since the last reboot, the only thing I could think of that changed from it working fine to this morning was my alarm? It was supposed to go off sometime in the morning maybe that froze it up? Other than that I have no idea why it would brick all of a sudden
tguerrerojr said:
I know this has been asked dozens if not hundreds of times, but it seems everyone has bricked their phone by rooting.
My phone has never been rooted, and I have had it working fine for at least 9 months now.
It was working all day and when I got home from school I plugged it into the charger the same as every night and when I woke up it was stuck on the "Samsung Galaxy III" screen.
I have no idea how to fix this please help, I cannot get into recovery mode it just says "recovery 'something'" and disappears quickly then shows the Logo Screen again before shutting off.
I can get into download mode and I guess I have to start from there.
I don't want to do a wipe without at least getting into it in safe mode somehow and backing up some things, please help.
Oh and if it helps no new software was added since the last reboot, the only thing I could think of that changed from it working fine to this morning was my alarm? It was supposed to go off sometime in the morning maybe that froze it up? Other than that I have no idea why it would brick all of a sudden
Click to expand...
Click to collapse
Sounds like "half SDS" which requires Motherboard replacement.
Please boot into download mode and let me know what it says there.
rootSU said:
Sounds like "half SDS" which requires Motherboard replacement.
Please boot into download mode and let me know what it says there.
Click to expand...
Click to collapse
It says
Warning!!
A custom OS can cause critical problems in a phone and installed applications
If you want to download a custom OS, press the volume up key.
Otherwise, press the volume down key to cancel.
Volume up: continue
Volume down: Cancel
then the caution/yield sign
END of screen
Thanks for your quick response
no, that's not all it says. does it say your model number?
Glebun said:
no, that's not all it says. does it say your model number?
Click to expand...
Click to collapse
Here are the screen shots
hxxp://i42.tinypic.com/2rc8nsw.jpg
hxxp://i39.tinypic.com/2zz5dhj.jpg
hxxp://i40.tinypic.com/14bq8lj.jpg
hxxp://i42.tinypic.com/k1f7nt.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That was all it said, but if i click to continue then it shows the last 2 screen shots and it stays like that forever.
ODIN MODE
Product Name: SGH-T999
Custom Binary Download: No
Current Binary Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Android icon
Downloading...
Do not turn off target !!
this is the i9300 forum, pal
Glebun said:
this is the i9300 forum, pal
Click to expand...
Click to collapse
Sorry didn't notice that, or that they were that different
tguerrerojr said:
Sorry didn't notice that, or that they were that different
Click to expand...
Click to collapse
The i9300 has a bug that wipes out the internal memory and causes symproms like yours, however I think only the i9300 has this bug.

Brick after installing GApps, help me recover!

Earlier I did a dirty flash of the 8-17 CM10.2 nightly over 10.1, rebooted and everything was ok. I decided to check for an updated GApps and downloaded the 20130813 GApps from here. I rebooted into CWM, installed the GApps, rebooted my phone and BAM! Stuck at the "Samsung Galaxy SII" screen.
Tried accessing recovery - no go. Tried accessing download mode - no go. Did some google-fu and discovered I can in fact get into download mode by pulling the battery, plugging my phone into USB, holding home + vol down and tapping the power button, even though I'm unable to enter download mode when on battery. Got into download mode and loaded up odin3 3.07, and installed stock UCKH7 which I used to recover my phone about 6 months ago. Odin flashed, reset my phone, said "Pass!", but phone was still stuck at the GSII spash screen. Tried again with stock UCLE5 image also confirmed working about 6 months ago - no go. Odin says "Pass!" but phone remains stuck at splash screen.
As a side note, my phone seems to get REALLY hot if I leave it sitting on the splash screen for two long, plugged in or not. I've also tried pulling the SIM and uSD.
Suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Morning update: After letting my phone set overnight without the battery, I plugged it back in and found no changes. I decided to try once more loading UCLE5, walked away from it and got some oats. When I came back, it was past the Samsung splash screen and bootlooping at the "AT&T - Rethink Possible" screen and was very hot.
I'm going to try pushing a kernel with CWM to it.
Are you saying that after flashing UCKH7 and then UCLE5 that you still can't get into recovery? Normally, the remedy for an incomplete boot, or boot loop, after flashing the stock firmware is to perform a wipe data/factory reset from stock 3e recovery.
Also, in your first post, you mention getting into download mode by holding down the home plus vol down buttons and then tapping the power button. The SGH-I777 does not have a hardware home button. And, I've never seen that sequence mentioned by anyone in connection with the SGH-I777. Are you sure you have the AT&T version and not maybe the GT-I9100?
creepyncrawly said:
Are you saying that after flashing UCKH7 and then UCLE5 that you still can't get into recovery? Normally, the remedy for an incomplete boot, or boot loop, after flashing the stock firmware is to perform a wipe data/factory reset from stock 3e recovery.
Also, in your first post, you mention getting into download mode by holding down the home plus vol down buttons and then tapping the power button. The SGH-I777 does not have a hardware home button. And, I've never seen that sequence mentioned by anyone in connection with the SGH-I777. Are you sure you have the AT&T version and not maybe the GT-I9100?
Click to expand...
Click to collapse
I've always held down the "home" capacitive key when getting into download or recovery, never tried without it.
Anyway, I used the "I777UCKH7.pit" in your repository and then reflashed, got into recovery, factory wiped, and I'm now in stock ICS. Thank you for posting all of those files!
Did you try holding the 2 volume button and THEN plugging in the USB cable? That gets me into download mode immediately.

knox notification manager in grand 2 after kitkat update!

Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yup it get count how to reset
rishabh_0895 said:
Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
Click to expand...
Click to collapse
how to reset it?
use knox remover tool!
knox removeable tool
rishabh_0895 said:
use knox remover tool!
Click to expand...
Click to collapse
what it do?? do it reset that counting how many times get flashed by cwm?
rishabh_0895 said:
Samsung has bundled its software update with knox security system so now we all r set to have our root counter start if root gets available.
Click to expand...
Click to collapse
I updated my grand 2 to 4.4.2. But I found slow net issues.
Then I try to back to 4.3 jellybean. But I flash again by odin.
But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on .
I use many methods to make again download mode. But fail.
I make jtag but fail no boot.
Please give me any way to put back my grand 2 in normal position.
Please help please
hi
is your phone display samsung logo? i just downgrade G8 to G4 yesterday and facing the big problem like you, I remove battery for some hours and after that.......... "I open odin + add stock Rom G8" while "I plug my phone with battery to my PC + hold home button + volume down button"... so my phone display Download Mode.. It's relly amazing...I can flash G8 rom and using normally :cyclops:
drrami75 said:
I updated my grand 2 to 4.4.2. But I found slow net issues.
Then I try to back to 4.3 jellybean. But I flash again by odin.
But suddenly hang in updating. I remove battery. But I put battery now my phone not charge not going to on .
I use many methods to make again download mode. But fail.
I make jtag but fail no boot.
Please give me any way to put back my grand 2 in normal position.
Please help please
Click to expand...
Click to collapse
if it does not go to download mode or recovery, the only option is to take it to Samsung Service, tell them that you were trying to upgrade with Samsung kies, PC conked off and you are stuck.
If it is under warranty they will replace the motherboard for you.
Please click on the thanks button if you think I helped
schubeir
Hi yesterday i have updated grand galaxy 2 and i am facing problem in knox when i open knok its showing a message on screen "please wait" and after that it shutted down automatically . I tried too open it many times, but i think i have do big mistake to get it flashed. please help me .

Samsung s8 plus it keeps restart, and now cant turn on

Hello everybody, I have a problem with my s8 plus Samsung, suddenly my phone froze, and begin to restart, almost 15 times or more. Then I did a force restart by holding volume down and power button, and after then its start-up usually for 10min, and again restarts, after I connecting to the power cable to changing, it stops charging. Then didn't response for nothing. DEAD, and after I leave it for a couple of hours, I tried to enter safe mode and to wipe cache memory. I thought maybe some app is causing a problem, and I run a test, and it shows me like this. On google, I found that probably is the motherboard, but somebody says its maybe last android update. And my friend says that perhaps it is RAM. Can somebody help me, I only want to access my phone to enter the gallery and save photos, then after that, the phone can be lifetime dead, it doesn't concern me. Thanks for helping me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dzi022 said:
Hello everybody, I have a problem with my s8 plus Samsung, suddenly my phone froze, and begin to restart, almost 15 times or more. Then I did a force restart by holding volume down and power button, and after then its start-up usually for 10min, and again restarts, after I connecting to the power cable to changing, it stops charging. Then didn't response for nothing. DEAD, and after I leave it for a couple of hours, I tried to enter safe mode and to wipe cache memory. I thought maybe some app is causing a problem, and I run a test, and it shows me like this. On google, I found that probably is the motherboard, but somebody says its maybe last android update. And my friend says that perhaps it is RAM. Can somebody help me, I only want to access my phone to enter the gallery and save photos, then after that, the phone can be lifetime dead, it doesn't concern me. Thanks for helping me
Click to expand...
Click to collapse
From recovery reboot too bootloader and reflash stock firmware using odin
Sent from some device I modified
jrkruse said:
From recovery reboot too bootloader and reflash stock firmware using odin
Sent from some device I modified
Click to expand...
Click to collapse
Is it possible then to save photos?
Flash the BL and AP and CP along with home csc file not regular csc file and skip the data file
Sent from some device I modified
jrkruse said:
Flash the BL and AP and CP along with home CSC file, not regular CSC file and skip the data file
Sent from some device I modified
Click to expand...
Click to collapse
I will try that, when I turn on the device, now it's frozen again, and I think it is turned off, because I can't turn on, but the battery is 100% charged.
dzi022 said:
I will try that, when I turn on the device, now it's frozen again, and I think it is turned off, because I can't turn on, but the battery is 100% charged.
Click to expand...
Click to collapse
Honestly you are probably going to have to wipe data but you can try
Sent from some device I modified
jrkruse said:
Honestly you are probably going to have to wipe data but you can try
Sent from some device I modified
Click to expand...
Click to collapse
Thank you, i will try that. Will post update when finish.
dzi022 said:
Thank you, I will try that. Will post update when finish.
Click to expand...
Click to collapse
Finally, after almost 12h, I successfully power on my phone, and when I turn on, it showed me this error. Now I think maybe is everything ok with the motherboard because when I type on google this problem, it says that after Samsung Knox update, many users have this problem with the phone.
dzi022 said:
Finally, after almost 12h, I successfully power on my phone, and when I turn on, it showed me this error. Now I think maybe is everything ok with the motherboard because when I type on google this problem, it says that after Samsung Knox update, many users have this problem with the phone.
Click to expand...
Click to collapse
Its not a problem you enter it by holding the bixby +pwr+vol dwn buttons at the same time Its called download mode or bootloader mode this is where you flash stuff in odin after you press the volume up button to continue like it says. So now flash the stock firmware
Sent from some device I modified

Categories

Resources