1 i downgrade to the stock rom activation fails
2 i try s-off run mean rom rooted activation update profile fails
3 i return to latest stock rom run all updates ##786# erase device to factory settings
4 i read on some forums login in to wifi sign in to htc account and then device will activate fails i even turn lte option off on ##DATA#
if anyone can give me tips i will appreciated i haven't write the nv files yet 465 466 1192 1194 because if i do i get error 67 data connection can't be establish
i do own the latest cdma work shop
i do notice that in nam i still have [email protected]@hcm.sprintpcs.com and it should be [email protected]@hcm.sprintpcs.com
can anyone share the knowledge on flashing the evo lte to boost
Same problem here .... Any news?... phone is active and sms but cannot update profile
alexz702 said:
1 i downgrade to the stock rom activation fails
2 i try s-off run mean rom rooted activation update profile fails
3 i return to latest stock rom run all updates ##786# erase device to factory settings
4 i read on some forums login in to wifi sign in to htc account and then device will activate fails i even turn lte option off on ##DATA#
if anyone can give me tips i will appreciated i haven't write the nv files yet 465 466 1192 1194 because if i do i get error 67 data connection can't be establish
i do own the latest cdma work shop
i do notice that in nam i still have [email protected]@hcm.sprintpcs.com and it should be [email protected]@hcm.sprintpcs.com
can anyone share the knowledge on flashing the evo lte to boost
Click to expand...
Click to collapse
did you s off before you flashed your phone to boost? I want to s off, but I dont want to lose my flash like I di on my evo 3d... I also cant update profile or PRL... on my old evo 3d flashed to boost, I was able to update profile, and prl
Im s off mean Rom as well. I was able to get the 3g symbol, but just no data. No luck here tho I tried with dfs, cdma ws, qpst, and qxdm. Everything works fine no error 67. I just can't update profile or prl, and well no data
EVO 4G LTE on Boost, Error code 1233
i have the same problem, i have a evo 4g lte i flashed everything with a clean esn and was aslso able to obtain both phones MSL/SPC codes one from the boost mobile activated phone and the other through rooting methods, so now heres the problem ive had problems with the M.IP setting i believe they are set up correctly.....FnameLname##@boostmobile.com.....this has been confirmed by the customer service tech. after doing research ive learned that it could also or require the [email protected], boostmobile didnt confirm that one but ive tried every single method of fixing this Error Code 1233 on the data update part but seems impossible PLEASE HELP!!!!!!! Thanks
ewells88 said:
i have the same problem, i have a evo 4g lte i flashed everything with a clean esn and was aslso able to obtain both phones MSL/SPC codes one from the boost mobile activated phone and the other through rooting methods, so now heres the problem ive had problems with the M.IP setting i believe they are set up correctly.....FnameLname##@boostmobile.com.....this has been confirmed by the customer service tech. after doing research ive learned that it could also or require the [email protected], boostmobile didnt confirm that one but ive tried every single method of fixing this Error Code 1233 on the data update part but seems impossible PLEASE HELP!!!!!!! Thanks
Click to expand...
Click to collapse
you need a donor phone copy aaa keys transfer them to your evo lte .. all settings from your data profile must patch the donor phone
all issues will solve
Related
Ok so i got my thunderbolt on page plus with working text and talk but for a whole week now i've been searching and searching on how to get data working. I know there's a video here that uses WS 3.7 to unlock everything, i don't want to drop $100 just to unlock my phone fully so i'm trying to do it with DFS CDMA Tool and everytime i try to write the MIN and some other stuff on COM Port 9k it doesn't seem to stick and just goes back to what the settings was before. If anyone has been successful, even with 1x data speed, with this can you help me? I'm hopeless and wished i had WS 3.7 just so i can finish this already. Spent numerous hours with no work arounds. Thanks in advance.
Probably not the best forum to ask this on but i haven't found others that had much help. I know Cricket has Thunderbolt users with full internet, but for some reason i can't get the settings to work on DFS.
Not sure about PPC, but I have my Thunderbolt fully flashed to Cricket, including 3G, MMS, and voice/data simultaneously with any SIM card inserted. Use QPST and you should have both a diag and modem port. Go to diag and write opensesamedoor directory with EFS Explorer. Reboot, go to NVM folder (should be unlocked), and write your modem MEID in files 0 and 1943. I used Oriax123s tutorial over at Cricketusers forum.
Hello!
i have an DNA for use outside USA in cdma/evdo mode. I have everithing set but cant figureout how to insert mi carrier PRL.
Any help will be apreciated
Thanks.
What country? Cause prl is for CDMA NOT GSM(SIM CARD)
Sent from my SAMSUNG-SGH-I317 using xda premium
As i know, CDMA bands is LOCKED to Verizon.
Only the GSM bands are UNLOCKED .
Connect stock DNA to PC , pull fresh wmodem drivers installer out of its virtual cd , install em , dial ##3424# and youll have a diag port . Then you can upload any prl with qpst, dfs , workshop and so on.
simobk said:
I have an unlocked Droid DNA that I use on the canadian Fido network.
Everything works fine except calling *611. I get redirected to Verizon instead of Fido.
Click to expand...
Click to collapse
littlebo said:
Connect stock DNA to PC , pull fresh wmodem drivers installer out of its virtual cd , install em , dial ##3424# and youll have a diag port . Then you can upload any prl with qpst, dfs , workshop and so on.
Click to expand...
Click to collapse
Thanks littlebo,
OK, I went to IRC, asked the question multiple times, and finally got an answer from quite drunken cerjam1 who did try to help when not calling me names
According to him, it could be a PRL issue (I had to google it).
My question now is : Is PRL included in a ROM or is it lower in the architecture? Right now, I have Nos M7 rom installed, the VZW version. Would installing the GSM version, or another rom, fix it?
Otherwise, can anyone give me some hints on how to change the PRL to have Fido there?
Thanks,
Simo
I was wondering where my post disappeared. I suppose a mod moved it here. I added a little quote from the original post for some context.
Also, since the last post, I installed UKN DNA 1.3.0. Still the same problem.
Also FYI, I had already searched the forums and found this post. Unfortunately, after the ##3424#, I get USSD code running... followed by Connection problem or invalid MMI code.
I do have the right drivers and can communicate with the phone using ADB.
I have a stock s4 from US Cell that I just got today. I have flashed a few s3's to boost and was told it was the same process. After hours of research and a few lines in command prompt I was able to get into DM mode and was able to have workshop (cracked addition) and DFS free to be able to read and right. I know my SPC and have the correct password.
I was able to successfully fix the ESN of the S4 and then I tried to write the NV item 465 and 466 it said 0 files where written successfully. When I tried to put in the info for the data nothing seems to stick in DFS including the PRL so I am kind of at a loss.
Anyone please let me know what I am doing wrong so that I can get this s4 up and running on boost?
Does anyone know if any custom rom will help? Also when picking a custom rom should I look for a sprint one since i am flashing to boost or should I look for a us cell since that is the phone type
Sent from my SPH-L710 using xda app-developers app
hi
today i install official LS990ZV8 after the installation i was trying to use the different carrier so i root the phone and unlock the sim with the help of this url after all these installation my phone got new network of different carrier but the problem is that i cant use the data of my carrier
i attached three pictures of it plzz help me
try to use ##72786# and update this will update data
Sent from my LGLS990 using XDA Free mobile app
happened to me a few times when flashing, i talked to the sprint cs ppl and they said it had to do with the towers not giving u the proper handshake when booting, i just kept doing the ##72786
I have the same problem and released this because I use with Telcel in Mexico but do not let me use data not shown me I get my operator Mimas options attached images...
work if I do say to type: ##72786# ???
only 3g on RR 5.5.5
I've had to experiement with lots of different ROMs to get the data working at the same time as the calls/texts on my phone.
i've used straighttalk for a while and finally abandoned that ship and went with Ting.
so far, other than stock rom, i only get service on Resurection remix but its only 3g.
anyone find a work around for this kind of problem?
I'm on their sprint CDMA network.
Hello,
I was using an unlocked sprint htc m9 in India (purchased through ebay). My 3g was working fine untill i tried enabling data on roaming. First, it wont enable and then it lost 3g/WCDMA tower.
Now I cant enable 3g. The seller is not supportive and I am using a 2g HTC M9 :crying:
I tried : http://forum.xda-developers.com/sprint-htc-one-m8/general/enabling-3g-umts-countries-t2847461
But in STEP 8 : SERVICE PROGRAMMING -->>My mobile is showing on COM3 port,, but but..... when i click ok in the service programming tab it shows -- online connection error.. unspecified error
Then i tried this http://forum.xda-developers.com/one-m9/general/how-to-change-network-bands-gsm-devices-t3135401
The log is here.. it wont let me rad or write..
I dont know once i was able to get the read and write (yesterday i think) but even after selecting new bands in ""band preferred"" and then the same in "RF BC config" nothing hapened.
I am S-ON and unlocked.
Help!!!