[Q] After recovering stolen phone, it is now soft-bricked - Sprint HTC EVO 4G LTE

Long story short, had a party at my house. The phone was stolen and wiped, OS entact, then sold on craigslist. Whoever bought it on craigslist, soft bricked it. Returned it to the seller who then found out it was mine and returned it. It was retrieved by my sister and was returned to me with the Splash Screen on with the red HTC developer warning at the bottom. Good news, phone is back. Bad news, its soft bricked.
So i go through a few of my options.
1) Recover a NANDROID
Internal SD completely wiped and External is missing
2) Load a NANDROID that I had saved on the computer onto a buddies external SD and recover
Loads to Splash Screen, goes to blank and returns to splash infinitely
3) Try the new DirtyRacun S-OFF
Cannot move past Step 13 because of symptom from #2 above. So now Im thinking that this may be because this method puts the original RUU on the device. I had CM on it at the time, which was flashed using Flash GUI, Im assuming the CM Kernal is still on the device and the Stock RUU wont match with the CM Kernal.
4) Flash CM
Same symptom as #2
At this point all I can do is ask the masters on the XDA forums (all you guys). The forums have totally helped me in the past but this is my first post. So, Im not to a noob to rooting and its involved processes, but, by no means am I an expert. Any kind of help would be greatly appreciated. Some other things that may help are this I have a feeling that the Internal SD may be unmounted but Im not sure. I am unlocked and S-ON I was running a recent nightly CM flashed using Flash GUI. My recovery is TWRP 2.2. Also, Ive tried to search for soultions on the forums but havent found anything similar to my particular situation. If i could get a reference to different post that would be awesome too.

might try the recovery tool from original dev section
it was looking like a good resource for soft bricked phones.
since there's the racun s-off now you could maybe dev-re-lock and do the official ruu to 2.13 just to get to complete stock and a working phone

Also could try flashing stock pj75img from bootloader and starting fresh. I had to do this once when my system partition corrupted on me somehow and it saved my butt. It will overwrite anything left on your phone, kernel included.
Sent from my EVO using xda premium

sparytrainor said:
Also could try flashing stock pj75img from bootloader and starting fresh. I had to do this once when my system partition corrupted on me somehow and it saved my butt. It will overwrite anything left on your phone, kernel included.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
what would that involve. i only know how to flash stuff from recovery. how would you do it from the bootloader.?

If you are on 1.12 bootloader use this link to dl, rename file to pj75img.zip only, place on an external sdcard and reboot to bootloader. Bootloader will automatically find the pj75img.zip and ask if you want to update, follow directions from there (it could take a bit and will reboot a few times and even look like it's doing the same thing over again) let it do its thing reboot and voila... Back to working stock.. If you are on a newer bootloader you will have to search for pj75img.zip that matches your loader (1.15 or 1.19) I'm at work or I'd look for the others.. Good luck bud, hope it helps..
This link... http://d-h.st/UZ9
Sent from my EVO using xda premium

dangle79 said:
might try the recovery tool from original dev section
it was looking like a good resource for soft bricked phones.
since there's the racun s-off now you could maybe dev-re-lock and do the official ruu to 2.13 just to get to complete stock and a working phone
Click to expand...
Click to collapse
is there a link for that post?

[email protected] said:
is there a link for that post?
Click to expand...
Click to collapse
I think this might be what he's talking about. http://unlimited.io/qhsusbdload.htm not completely sure tho..
Sent from my EVO using xda premium

sparytrainor said:
I think this might be what he's talking about. [link not postable] not completely sure tho..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
according to their site its for bricks cause by the s-off process through unlimited also, it looks like its more for a hard brick.

[email protected] said:
according to their site its for bricks cause by the s-off process through unlimited also, it looks like its more for a hard brick.
Click to expand...
Click to collapse
That's what I thought to, but it's all I could find on un brick.. It sounds like u have similar symptoms as I did.. The pj75img.zip did the trick for me.. It's not nearly as involved as an unbricker would be and the phone virtually does it itself... What bootloader were u on??
Sent from my EVO using xda premium

im on 1.15.000, cant find a 1.15. img. would that be just taking the ruu and renaming it? i tried doing that and it still said no image was found

besom yahdrent
this **** would be a whole lot easier if i had known what the people who had my phone did with it. i feel like im missing something with it not working.

[email protected] said:
this **** would be a whole lot easier if i had known what the people who had my phone did with it. i feel like im missing something with it not working.
Click to expand...
Click to collapse
Do this first: https://www.dropbox.com/s/ywwsgozw7ek1rva/2.13.651.1_Firmware_NoHBoot_NoRecovery_PJ75IMG.zip rename to just pj75img.zip
Then try the 1.19 ruu.. I can't find a full stock pj75img for 1.15 either, but this might help...
Sent from my EVO using xda premium
---------- Post added at 07:43 AM ---------- Previous post was at 07:17 AM ----------
Might not hurt to pm rydah805 and see if he has anything that can help..
Sent from my EVO using xda premium

sparytrainor said:
Do this first: https://www.dropbox.com/s/ywwsgozw7ek1rva/2.13.651.1_Firmware_NoHBoot_NoRecovery_PJ75IMG.zip rename to just pj75img.zip
Then try the 1.19 ruu.. I can't find a full stock pj75img for 1.15 either, but this might help...
Sent from my EVO using xda premium
---------- Post added at 07:43 AM ---------- Previous post was at 07:17 AM ----------
Might not hurt to pm rydah805 and see if he has anything that can help..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
k thx, ill do that

Or Sgt slaughter
Sent from my EVO using xda premium
---------- Post added at 08:11 AM ---------- Previous post was at 07:51 AM ----------
Just out of curiosity, will twrp let u wipe ur system partition??
Sent from my EVO using xda premium

i can try

under advanced i have copy log to sd, fix permissions, partition sd card, file manager, terminal command and htc dumlock and under wipe i have cache, dalvik cache, factory reset, system, external storage and internal storage

Just go to wipe and system from the main menu and see if it gives you an error..
Sent from my EVO using xda premium
---------- Post added at 09:05 AM ---------- Previous post was at 08:44 AM ----------
Sent from my EVO using xda premium

Have you tried fastbooting the boot img.
Sent from my GT-P7510 using Tapatalk 2

thicklizard said:
Have you tried fastbooting the boot img.
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
i dont think so, how would you do that?

[email protected] said:
i dont think so, how would you do that?
Click to expand...
Click to collapse
In adb tools. Fastboot flash boot.img.
May be wrong but if your on 1.15 or higher u can't flash a pj75img from bootloader.
Sent from my EVO using xda app-developers app

Related

Brick updating firmware

So this morning I decided to update my firmware from the PJ75IMG.zip. I booted back to and while I was in the bootload a factor reset was done by accident. Now my operating system is now erased. S-off'ed with lazy panda. Also, i have no backup because my Vista crashed a week ago. Sprint will replace my phone, but is there any possibility of unbricking now?
Sent from my PC36100 using XDA
thanosart said:
So this morning I decided to update my firmware from the PJ75IMG.zip. I booted back to and while I was in the bootload a factor reset was done by accident. Now my operating system is now erased. S-off'ed with lazy panda. Also, i have no backup because my Vista crashed a week ago. Sprint will replace my phone, but is there any possibility of unbricking now?
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
Can you get into recovery?
Im guessing people dont understand the term bricked.....
Bricked- A device state in which you can NOT get to bootloader, Recovery or standard installed OS.
leo72793 said:
Im guessing people dont understand the term bricked.....
Bricked- A device state in which you can NOT get to bootloader, Recovery or standard installed OS.
Click to expand...
Click to collapse
If you are referencing my post, the op did not provide many details to determine if he is really "bricked" or not.
There have been quite a few cases of this.
You can try the lazypanda unbricker but it probably wont work
Yeah, recovery isn't the problem. Although it is showing relocked and I was going to reroot. just thought is was worth a shot posting.
Sent from my PC36100 using XDA
thanosart said:
Yeah, recovery isn't the problem. Although it is showing relocked and I was going to reroot. just thought is was worth a shot posting.
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
You still haven't really explained what the issue is? If you can get to recovery then just flash the stock rooted update.
bad flash
njfoses said:
You still haven't really explained what the issue is? If you can get to recovery then just flash the stock rooted update.
Click to expand...
Click to collapse
so its there a way to reboot the phone after a bad flash, i plug the phone and my pc said that it needs to install the qcl... something drivers so that means the phone its on... how i can make it to get into recovery mod again... repeat black screen... i can not do anything else... by the way i tried to flash the new radio
Sorry to hear that. I believe you're gonna need a pc to try to do anything towards fixing it. Try an RUU. You can always get a replacement before they start giving out refurbs.
via eVo.
thephantom007 said:
so its there a way to reboot the phone after a bad flash, i plug the phone and my pc said that it needs to install the qcl... something drivers so that means the phone its on... how i can make it to get into recovery mod again... repeat black screen... i can not do anything else... by the way i tried to flash the new radio
Click to expand...
Click to collapse
Try running the ruu or the lazypanda unbricker tool.
njfoses said:
You still haven't really explained what the issue is? If you can get to recovery then just flash the stock rooted update.
Click to expand...
Click to collapse
Do you mean the ruu or a stock ROM. Will that recover the operation system files.? Basically I have nothing on my internal card.
Sent from my PC36100 using XDA
i tryed the lazypanda unbricker, but did not work it said it couldnt find the device and the ruu... where do i find the link?
thanosart said:
Do you mean the ruu or a stock ROM. Will that recover the operation system files.? Basically I have nothing on my internal card.
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
If you can access recovery you can flash a rom. Your other option would be to run the ruu. You will never get your data back though.
---------- Post added at 09:48 PM ---------- Previous post was at 09:47 PM ----------
thephantom007 said:
i tryed the lazypanda unbricker, but did not work it said it couldnt find the device and the ruu... where do i find the link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1655733
I'll give both the stock ROM and then the ruu if that doesn't work. I just thought having wiped everthing on the internal SD card would have removed crucial information. Will report back. Thanks for the help.
Sent from my PC36100 using XDA
Ok, so I flashed flex's 1.78 because that was the only stock Rom left on my ext sd card. Back in business. S-off, recovery, and rooted. Thanks rjfoses for the info.
Mods please delete.
Sent from my EVO using xda premium
leo72793 said:
Im guessing people dont understand the term bricked.....
Bricked- A device state in which you can NOT get to bootloader, Recovery or standard installed OS.
Click to expand...
Click to collapse
This...the most common being trying to flash back to the old firmware
Completely unresponsive no lights no power hard bricked
Rxpert said:
There have been quite a few cases of this.
You can try the lazypanda unbricker but it probably wont work
Click to expand...
Click to collapse
looks like he was soft bricked
Sent from my SPH-L710 using xda app-developers app
Wow this was one of the more confusing threads ive read...is the issue resolved if not please give some details i.e twrp version soff son?what you were flashing? Rom?
Sent from the depths of hell
thanosart said:
Ok, so I flashed flex's 1.78 because that was the only stock Rom left on my ext sd card. Back in business. S-off, recovery, and rooted. Thanks rjfoses for the info.
Mods please delete.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
He had a bad flash soft brick.
He fixes it
The end
Sent from my SPH-L710 using xda app-developers app

[Q] CM10.1 ALPHA3 Android 4.2.1 - Bootloop

Hi there.
I just flashed to the 'CM10.1 ALPHA3 Android 4.2.1' rom from zeubea, but i am stuck on the "HTC booting screen". I have tried to flash the rom 3 times but it's still looping. I have cleared cache, dalvik and data.
I don't really know what to do with it, i'm not that much into all this rooting and stuff, i just know how to flash a rom.
But if anybody knows what to do i would appreciate it.
You need to unlock your bootloader from htcdev.com
Sent from my Legend using xda app-developers app
What to do?
jazib360 said:
You need to unlock your bootloader from htcdev.com
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse
Sorry for asking a bit dumb... Bit I'm not really sure what to do here: "Before beginning Step 1 of the Unlock Bootloader process, your device requires an RUU to be installed." (I can't post the link 'cause i haven't got 10 points...)
(I was able to install CM10 BETA 1, I don't know if that's relevant though.)
mikkelblok said:
Sorry for asking a bit dumb... Bit I'm not really sure what to do here: "Before beginning Step 1 of the Unlock Bootloader process, your device requires an RUU to be installed." (I can't post the link 'cause i haven't got 10 points...)
(I was able to install CM10 BETA 1, I don't know if that's relevant though.)
Click to expand...
Click to collapse
RUU isa ROM Update Utility. I believe this is the ClockworkMod Recovery software. It's been a long time since I gained root on my Legend, so I really cannot remember exactly how I did it. I think there is something in ClockworkMod that can give you temporary root, and you should then be able to boot and flash with a rooted image.
Sorry that's vague. Nowadays, I just drop an image on the SD card, and run the ROM Update routine. Effectively, ClockworkMod sits on my SD card too, as a file called Update.zip, and I run that from the HTC boot menu. That then lets me pick any other image I want to flash the phone.
Someone else might be able to fill in any gaps.
JW
ERROR 190
dublevay said:
RUU isa ROM Update Utility. I believe this is the ClockworkMod Recovery software. It's been a long time since I gained root on my Legend, so I really cannot remember exactly how I did it. I think there is something in ClockworkMod that can give you temporary root, and you should then be able to boot and flash with a rooted image.
Sorry that's vague. Nowadays, I just drop an image on the SD card, and run the ROM Update routine. Effectively, ClockworkMod sits on my SD card too, as a file called Update.zip, and I run that from the HTC boot menu. That then lets me pick any other image I want to flash the phone.
Someone else might be able to fill in any gaps.
JW
Click to expand...
Click to collapse
When I'm trying to install the RUU, i get the error: ERROR[190]-ROM version is not the latest version ???
mikkelblok said:
When I'm trying to install the RUU, i get the error: ERROR[190]-ROM version is not the latest version ???
Click to expand...
Click to collapse
My bad...the RUU they refer to is nothing to do with ClockworkMod. That may come later. The RUU is explained on the HTCdev page. It is just a suitable ROM for updating the HBOOT. That said, if you could install the older Cyanogenmod, I don't understand why not this one.
Simple answer is, the phone is already rooted, so the ruu from Htcdev cannot be used to unlock the bootloader.
In this case, the only solution is to follow the solution provided by blay0, I dont have the link to the actual post, maybe you could go read some of the many other threads regarding the topic, you may even learn something you don't know.
Hint: try doing a search for "blay0", "bootloader" & "Htcdev"
Sent from my Legend using xda app-developers app
---------- Post added at 08:52 AM ---------- Previous post was at 08:48 AM ----------
mikkelblok said:
Hi there.
I just flashed to the 'CM10.1 ALPHA3 Android 4.2.1' rom from zeubea, but i am stuck on the "HTC booting screen". I have tried to flash the rom 3 times but it's still looping. I have cleared cache, dalvik and data.
I don't really know what to do with it, i'm not that much into all this rooting and stuff, i just know how to flash a rom.
But if anybody knows what to do i would appreciate it.
Click to expand...
Click to collapse
Oh, btw the heading is bootloop, did you use the proper procedure for flashing? Ie format:- boot,system,data,cache & sd-ext then flash the rom?
Sent from my Legend using xda app-developers app
I'll try
ranger4740 said:
Simple answer is, the phone is already rooted, so the ruu from Htcdev cannot be used to unlock the bootloader.
In this case, the only solution is to follow the solution provided by blay0, I dont have the link to the actual post, maybe you could go read some of the many other threads regarding the topic, you may even learn something you don't know.
Hint: try doing a search for "blay0", "bootloader" & "Htcdev"
Sent from my Legend using xda app-developers app
---------- Post added at 08:52 AM ---------- Previous post was at 08:48 AM ----------
Oh, btw the heading is bootloop, did you use the proper procedure for flashing? Ie format:- boot,system,data,cache & sd-ext then flash the rom?
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse
I laways format boot, system, data, cache and sd-ext before I flash, so i don't think that's the problem. But yes, the phone is rooted. I'll check the solution out by blay0.
im a little confused with the posts in this thread but i seem to have the same problem with all the jellybin roms including cm10.1 alpha3.im getting suck at boot screen.im guessing it may be because my htc legend is s-so or because i haven't partitioned my sd card.
if i have topartition my sd or make it s-off can you please give me a guide or something.
p.s: my phone is rooted and i'm using a miui ics right now
p.p.s: i tried shutting down and rebooting. didn't help
please hellp:crying:
Unlock ur bootloader at htcdev.com
Sent from my HTC Legend using xda app-developers app
jazib360 said:
Unlock ur bootloader at htcdev.com
Sent from my HTC Legend using xda app-developers app
Click to expand...
Click to collapse
will i loose any information?
-:bahman:- said:
will i loose any information?
Click to expand...
Click to collapse
Follow blay0 method.
http://forum.xda-developers.com/showthread.php?p=22613990
Sent from my Legend using xda app-developers app
-:bahman:- said:
will i loose any information?
Click to expand...
Click to collapse
Not when you use BlaY0's instructuons!
http://forum.xda-developers.com/showpost.php?p=22613990&postcount=62

i f'd it up need help please

i tryed to s off with revone and i got s off and got twrp to kinda install it worked but didnt fit the screen so i needed to s on so i could send it back cuz i cracked the screen neways i wiped everything and and did the s on but it says locked and s off and now it wont boot past the white htc screen i tryed to push the ruu and it worked but still wont boot
Got to ask.. does it mater that it doesn't boot? You are sending it back...
They knew it worked when I called them but I have sent a thunderbolt back rooted with a custom Rom but it was water damaged I'm thinking about getting it wet and calling and telling them my dog knocked over my drink and it got the phone b4 I could get to it first
Sent from my HTC6435LVW using xda app-developers app
You are sending it for a broken screen yes?
Phaded said:
You are sending it for a broken screen yes?
Click to expand...
Click to collapse
Yes
Sent from my HTC6435LVW using xda app-developers app
Then if you are paying a deductible anyways, I wouldn't worry about it.
Phaded said:
Then if you are paying a deductible anyways, I wouldn't worry about it.
Click to expand...
Click to collapse
But If something is wrong that I didn't tell them then they will charge me 250 and I told them it worked fine except for the broken screen
Sent from my HTC6435LVW using xda app-developers app
That would only apply for a warranty exchange... Just call them, say you dropped it in water. Your deductible is the same anyways.
I don't think the DNA will be damaged from a spill. Or even a drop in the toilet or tub. Its pretty water tight, you'd have to like drop it from a boat lol
Tapatalked from my HTC DNA - Carbon
bout to find out cuz i cant get it to do anything but load up fastboot trying to get into recovery dont work trying to factory reset from fastboot dont work
did you reflash the recovery, cause if you can't get into it then there must be something wrong with it.
zone23 said:
did you reflash the recovery, cause if you can't get into it then there must be something wrong with it.
Click to expand...
Click to collapse
After I wiped everything it jacked it all up
Sent from my HTC6435LVW using xda app-developers app
skeet43169 said:
After I wiped everything it jacked it all up
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
So what does that mean you can't flash a recovery? Did you try running the RUU?
I'm pretty sure what I pushed was an ruu it said all kinds of stuff was installing it was an 2.0.6 maybe it wasn't an ruubut just the update but every time I try to use adb it won't find the device
Sent from my HTC6435LVW using xda app-developers app
So you know I can wipe the entire device including formatting the recovery, boot, system whatever doesn't matter as long as hboot is in place. As long as I can boot hboot I can recover it as well. Its difficult to trash the device as long as hboot works. Most of these problems are related to the drivers not being installed properly. Most users say they already know this but I'm gonna say it anyway fastboot and adb use different drivers.
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
skeet43169 said:
I'm pretty sure what I pushed was an ruu it said all kinds of stuff but every time I try to use adb it won't find the device
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
An RUU is a windows .exe that you well run from windows. It will restore the device to factory but you wont loose S-Off. Once S-Off always S-off.
zone23 said:
So you know I can wipe the entire device including formatting the recovery, boot, system whatever doesn't matter as long as hboot is in place. As long as I can boot hboot I can recover it as well. Its difficult to trash the device as long as hboot works. Most of these problems are related to the drivers not being installed properly. Most users say they already know this but I'm gonna say it anyway fastboot and adb use different drivers.
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
An RUU is a windows .exe that you well run from windows. It will restore the device to factory but you wont loose S-Off. Once S-Off always S-off.
Click to expand...
Click to collapse
I'll try anything at this point dude but it says locked and also says s off
Sent from my HTC6435LVW using xda app-developers app
skeet43169 said:
I'll try anything at this point dude but it says locked and also says s off
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
If you have windows try the 1.15 RUU from this thread.
http://forum.xda-developers.com/showthread.php?t=2293919
But you need to check your drivers and make sure you have the correct on loaded in Hboot or it wont work. You may also need to flash the ENG-Hboot before you can restore with the RUU. I don't have a windows machine here so I can't tell you exactly what the driver is but I think its something like composite fastboot device or something (when in hboot).
I can't get into the internal sd to move that file unless I can adb push it somehow
Sent from my HTC6435LVW using xda app-developers app
Did you relock and s-on with a custom recovery already on the phone? Or a custom boot.img?
---------- Post added at 05:03 PM ---------- Previous post was at 05:02 PM ----------
You know there are guides here that outline every step needed to return to stock. Had you found and used the guide you wouldn't be in this predicament.
---------- Post added at 05:04 PM ---------- Previous post was at 05:03 PM ----------
skeet43169 said:
I can't get into the internal sd to move that file unless I can adb push it somehow
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
It's not something you flash...
I did the revone s off so when I got my new one I would know what to do it was simple and then did the s on but it still said s off and locked so I did the s off and tried to or did install twrp from goo manager but I thought the install was to fast but it rebooted into recovery and it didn't fit the screen so I wiped everything and tried to go back to stock and this happens
Edit I'm running the ruu now the phone it stopped and says the Rom update utility cannot update your android phone please get the correct Rom update utility and try again
Sent from my HTC6435LVW using xda app-developers app

[Q] Downgrading from 153.0007

Hello guys,
I do realize there are tons and tons of threads of this topic, but I still decided to make a new one. That is mostly because the other ones are like 1,5+ year old, and most of them have comments of people that managed to get into bootloops, bricked their phones or whatever it is called (also happened to me).
I'm a total noob at rooting and doing stuff to my phone. I have only rooted it back in 2012, march. I put some "cool ics" or something like that on it, and now, I've decided to change to something new, better. But as I've seen I'll have to downgrade it, I tryed, but I got into a bootloop. So now I'm scared to do anything (I did fix it tho). Could you guys explain, or atleast post links to WORKING tutorials, please?
My hboot version is 1.53.0007, S-ON. The bootloader is unlocked. I have 4ext recovery, and I don't think it's rooted by revolutionary method (if that even tells anything).
So if you tell me to put some other recovery stuff on it, please also tell how to delete this 4ext thingy. xD
Thank you in advance, iShovel out
Lol same case over here... But I managed to do it all and now I'm on CM 10.02...
Go to forum.xda-developers.com/showthread.php?t=1795934
In step 4 via direct link you will not find the file 'couse it's an old thread but search it on the web and download it, that way you don't need to download linux live cd, but follow everything else...
But before everything search a bit more because that tutorial is based on assume you have all the programs and drivers installed...
If U get in trouble just ask
Sent from my Evo 3D GSM using xda app-developers app
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
Also look at this
http://forum.xda-developers.com/showthread.php?t=2416207
Sent from my Evo 3D GSM using xda app-developers app
CroPunisher said:
Lol same case over here... But I managed to do it all and now I'm on CM 10.02...
Go to forum.xda-developers.com/showthread.php?t=1795934
In step 4 via direct link you will not find the file 'couse it's an old thread but search it on the web and download it, that way you don't need to download linux live cd, but follow everything else...
But before everything search a bit more because that tutorial is based on assume you have all the programs and drivers installed...
If U get in trouble just ask
Sent from my Evo 3D GSM using xda app-developers app
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
Also look at this
http://forum.xda-developers.com/showthread.php?t=2416207
Sent from my Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
Thank you very much! But it says it will put the phone on version 1.49.9999. Can I put that PACMan thingy on, if it's on 1.49.9999? I mean, I've been thinking about the PACMan, but I honestly really don't know which one to choose, since there are so many. Any suggestions? I've been looking for something that speeds up the phone, doesn't need 3D camera, and is generally good...
Don't know about pacman haven't tried it... I'm using CM 10.2 from Johnnyslt and it's awsome for me...
About your HBoot, look at the first link I gave U, there is another step in which U flash and get 1.43.0007
Sent from my Evo 3D GSM using xda app-developers app
---------- Post added at 11:06 PM ---------- Previous post was at 10:52 PM ----------
I've looked, with hboot 1.49.9999 U can also put pacman rom
Sent from my Evo 3D GSM using xda app-developers app
I do have a question - if I want to install this Leedroid GB ROM, and I already have cool ics, do I have to uninstall it first to put the other rom on? And if yes, how do I do that?
iShovel said:
I do have a question - if I want to install this Leedroid GB ROM, and I already have cool ics, do I have to uninstall it first to put the other rom on? And if yes, how do I do that?
Click to expand...
Click to collapse
First of all, make sure that is based on htc sense rom then copy the rom in your sd card, else the phone go in bootloop.
I guess you already have 4EXT recovery, so go in bootloader mode (Volume down+PowerOn. It's a white screen) and enter in the recovery.
Make sure you have the smartflash feature enabled. Go in tools and enable it.
Make a nandroid backup (it's a full backup)
Wipe cache and all that the developer say in the rom thread.
Now you have to install the new rom Install from sdcard, find the zip and install it
Thank you
But once again, the noob I am, I managed to screw something up. I'm now at steps 10-11. At first, when I ran that controlbear.exe as administrator, it got stuck saying something like "setling your device...please wait..." (it didn't say exactly that, but I forgot what it said). I rebooted phone, tryed steps 7-10 again, and now it's stuck on "searching device" in command prompt -.-' Any ideas whats wrong?
And I feel so bad right now, since I can't do anything correct...not once...
EDIT: TRYED RUNNING CONTROLBEAR ONCE MORE, IT WORKS NOW!! it tells me to do the wire trick! ok guys, now wish me luck, because if I screw this up, then...
Let us know!
Well...I've, done the wire trick, but when I turned on my phone, there was just black screen with "JuopunutBear" text on it, and a green arrow + phone. So I said to myself, it's probably ok, that I just need a rom. So i installed PACman rom + gapps, and there is still this black screen with "JuopunutBear" text on it....what do I do now?
Connect the phone and execute controlbear once more, it woked for me, forgot to say because it doesn't say in directions
Sent from my Evo 3D GSM using xda app-developers app
CroPunisher said:
Connect the phone and execute controlbear once more, it woked for me, forgot to say because it doesn't say in directions
Sent from my Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
It says:
blah
blah
Found backups!
Device S-OFF already!
Quit.....
Press enter to quit....
And nothing happens, still on the black screen with "JuopunutBear" :/
OK, now go to hboot and see if your hboot is changed, then go to recovery, wipe everything except SD card, flash cm10 and gapps
Sent from my Evo 3D GSM using xda app-developers app
It is on S-OFF, 1.49.9999, I wiped, I installed PACman & gapps, and I'm back at black screen of JuopunutBear
Ahh these ****ty instructions lol, try this: remove battery, remove SD card and then turn on the device and see if it will start normally
Sent from my Evo 3D GSM using xda app-developers app
It does not - the god damn JoupunutBear still shows up.
Wait, after wire trick did u flash hboot 1.49.007? It will remove joupunut bear logo and hboot 1.49.999
Sent from my Evo 3D GSM using xda app-developers app
Ooooooh, that might have been the problem, yes. xD I thought I read that you can flash PACman with 1.49.9999...So is there like another guide to get to 1.49.0007?
No need for another guide, just find and flash zip file with hboot 1.49.007, I flashed it myself hoping that this would remove controlbear image and propperly boot the phone and it did, after that flash cm10 and gapps, don't forget to wipe before flashing ROM...
Sent from my Evo 3D GSM using xda app-developers app
And once again, there's a ****load of different methods and stuff to get to 1.49.0007. Do you think http://htcevohacks.com/htc-evo-3d-hacks/how-to-downgrade-to-hboot-1-49-0007-on-htc-evo-3d-gsm/ will work? If not, could you please paste something that will actually work? I've already bricked my phone once trying to do that thing...
Yep I checked, hboot 1.49.007 is installed, find it and flash
Sent from my Evo 3D GSM using xda app-developers app

Bricked my Evo 3D CDMA Sprint. Need help.

First off thanks for looking & any help is appreciated. Second I searched & got Search feature is temporarily unavailable. So I did search the first 5 pages by Ctrl + F.
Nothing was quite what I have going on. Mea culpa this was all my fault. I read read read & couldn't sort it out & I went ahead anyways. Now things are starting to make sense to me. But I bricked it already. I think it is soft bricked but I was so stupid & hasty I might have hard bricked.
I went here XDA, AF, Google & willy nilly everywhere. The only thing I did right was unlocking the bootloader at HTCdev. This is so stupid & flailing away, I can't recount all the things I did.
I have hboot 1.58.0000, S-ON, ICS 4.03, no root, no nandroid & no .img on sdcard. As far as I can relate what I did, I was just flailing away. I flashed recovery-clockwork-5.0.2.0-shooter.img without rooting first. I don't think I was successful next at installing or maybe flashing RootingSuperuser.v.3.0.7.zip. I just threw files & flashes at my poor defenseless Evo 3D without understanding. Involved also were files such as fastboot.exe, a lot of CMD prompts entering commands after commands.
So I'm at the HTC white for a minute or so. Then it turns off & then after approx 30 seconds it turns back on & repeats over & over. I can get into FASTBOOT. But going into the next option BOOTLOADER throws it into bootlooping.
So my Evo 3D was innocent & through my ignorance I killed it! Please can it be saved? Will you help this soul who was frustrated, confused & foolishly proceeded?
Thank you XDA.
I tried a RUU at the kind suggestion of a mod over at AF. Here's the error I received.
ERROR [155]: UNKNOWN ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again.
I believe I have version 2.95.651.5. And this RUU is version 2.89.651.2. Could this be a problem?
There is no ruu for hboot 1.58
Sounds like you still need to flash a recovery. Then you can flash a sense based rom.
Sent from my Evo 3D CDMA using xda app-developers app
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
Actually it sounds like you have a recovery, and need to flash a ROM.
Put a sense based ROM on your SD
Wipe all partitions except SD card
Flash ROM
Reboot
Sent from my Evo 3D CDMA using xda app-developers app
hossman said:
There is no ruu for hboot 1.58
Sounds like you still need to flash a recovery. Then you can flash a sense based rom.
Sent from my Evo 3D CDMA using xda app-developers app
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
Actually it sounds like you have a recovery, and need to flash a ROM.
Put a sense based ROM on your SD
Wipe all partitions except SD card
Flash ROM
Reboot
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Heard TWRP Recovery is the best for Evo 3D. But is that even possible as I'm NOT rooted & in a loop?
If so how? Thanks.
zapjb said:
Heard TWRP Recovery is the best for Evo 3D. But is that even possible as I'm NOT rooted & in a loop?
If so how? Thanks.
Click to expand...
Click to collapse
How did you brick your phone?
TeChNoC4AzY said:
How did you brick your phone?
Click to expand...
Click to collapse
I think trying to flash CWM recovery. But I was confused. Should have stepped away from the computer/phone/etc & tackled another day.
It's not bricked. You just don't have a bootable rom if you get to the bios (HTC splash screen) all you need is to get a recovery and flash something. Had you bricked it you wouldn't be able to turn the thing on.
Sent from my Evo 3D CDMA using xda app-developers app
Well I'm sorted. Thanks XDA.
I got a lottttttttttt of help over at AF.
If interested it's under the same title as here:
"Bricked my Evo 3D CDMA Sprint. Need help."

Categories

Resources