Hi fellow nookers,
My friend (@ikingblack on XDA) has released 2 guides as of now, and unfortunately, his guides are a little misleading, and has you flashing packages left and right. Hopefully, this time I will try to get it right. I am not trying to be rude, just trying to point out that his guides are a little scant and incomplete. And please feel free to leave bad comments so I can improve it.
All right. Enough of that yucky stuff. Here's the Guide:
Requirements:
1. Rooted Nook Color with ClockworkMod Recovery (3.0.0.10 or later)
2. An SDCard that is bigger than 200 MB.
3. A Browser on the Nook that has the option of downloading to the SDCard.
4. Internet Access on the Nook is not required (NO).
5. A flashable ROM for the Nook on your SDCard
6. A ClockworkMod SDCard, which is optional but makes it easier (Especially Step 8). (search around the forums, will post link later) Please keep in mind that you have to take the SDCard out whenever you want to boot the Nook Software, and not ClockworkMod. Also, when I say boot into ClockworkMod in the guide, then you can just insert the SDCard and reboot.
Notice: Whenever I say download a certain file, it means download it to your SDCard. It does not matter how you do it, just get it on there. You can download it on your Nook, or download it on your computer and put it on the SDCard. It really doesn't matter.
Step 1.
Make sure you have a valid backup that is current. If not, make one, either through ROM Manager or ClockworkMod.
Step 2. First, download the preparation dual boot file. If you have dual booted before, and haven't removed it, then skip this download. Download Here.Then download the stock Nook ROM flashable zip, I recommend this one: Download. It is the latest version and keeps ClockworkMod. Keep in mind that the package has to keep ClockworkMod. Then download the root file if you want root: Download. Then the Second root file: Download. Finally, download the dual boot file: Download. Please remember the file names so you know what to flash. If you want, you can rename them.
Step 3. Boot into ClockworkMod, (If you have an SDCard with ClockworkMod on it, insert it and reboot.) and go into "Mounts and Storage" (Use the Volume Buttons to scroll and the n/home button to select). Then select Format /System, and select yes. Then format Data.
Step 4. Press the Power button to go back, and select "Install zip from SDCard". Then select the second option or something and browse for the first downloaded, or the preparation dual boot file, called prep-dualboot-0.1.zip, and select "Yes". After it is done, repeat Step 4 except with the second downloaded file, or the Stock Nook OS file, called update-nc-stock-1.2-keepcwm-signed.zip.
Step 5. If you have the ClockworkMod SDCard, take it out now. Then reboot the device by going back (can be achieved by pressing power) and selecting "Reboot Device Now.
Step 6. It should boot into the Stock Nook OS. Follow the setup procedure. Keep in mind that you need WiFi.
Step 7. If you want root, then reboot into ClockworkMod. If you can't, or don't know how, then use the 8 failed boots method. 8 failed boots means boot it up, and before it reaches the logo, (The pulsing B&N Nook Color) shut it off holding the power button. Even though this takes long, I don't know of anything else.
Step 7 for ClockworkMod SDCard users: Just insert your ClockworkMod SD, and reboot! Simple.
Step 8. Flash the second file, or the root file called ManualNooter-4-4-278.zip. Then Flash the second root file, called apk-enabler-1-1a-signed.zip. Then if there is anything else that you need to flash, then flash it. Please keep in mind that as of now Dalingrin's kernel should not work with it unless he releases an update. I haven't checked this, so please correct me if needed. After you are done, flash the last package, the dual booter, called eclair-dualbootv2.zip or something. Then reboot and hold the home button when it says multiuboot loading. It should load the nook os.
Step 9. Then download Rom Manager, from here: Download, and then install it. Flash ClockworkMod by tapping the first button, and selecting Nook Color (not Nook Color (old)). Then reboot into recovery.
Step 9 for ClockworkMod SDCard users: This time, you will have to flash ClockworkMod onto your device. Just follow normal Step 10.5 (Not for
ClockworkMod SDCard users).
Step 10. Reboot into ClockworkMod again, via Rom Manager. When it is in ClockworkMod, then insert the SDCard where you have the backup and the Custom ROM that you want to dual boot. Once you have inserted it, go into Mounts and Storage, and select Mount SDCard. If the option says unmount SDCard, then you are good to go. Then flash the ROM that you want dualbooting, and any other zip that you want on the non-stock or custom ROM. After you are done, then go back, and select backup and restore. Select Advanced Restore and select your latest backup. Then select restore data. Once it is done, then you can reboot and it should reboot into your custom ROM (if you didn't hold the home button on boot).
You are now done! When you want to boot into the Nook OS, hold the home button when you power on and the nook says multiuboot loading. If you want to boot up your custom ROM, than don't hold the home button. You can also now get into ClockworkMod by holding both volume buttons when it says multiuboot loading. Please do not hesitate to post with complaints, improvements or the like. Thanks! I want to improve this and my knowledge in every way I can.
EDIT - I updated the guide on 4/29/11, and I might have made some errors. Post if you find any!
Credits:
@koush for ClockworkMod Recovery and Rom Manager which we all use at least weekly.
@HamNCheese for the root.
@rookie1 for the dual boot file
@nemith for the flashable stock
All of the developers who make dualbooting possible!
PS: PM me or post if I missed any credits!
Nice guide!
Yeah, better than mine I guess. Nice guide, once again.
Also, my guide just is not easy to understand, not incomplete.
Good guide.
Worked for me...
The only issue was that after step 6 I could not get back into Clockwork and couldn't get the Rom manager apk to open.
I used a Clockwork bootable SD card with the 1.2 apk updated zip on it and that worked well for me.
Dual-booting Phiremod and Nook 1.2!
pndo1 said:
Hi fellow nookers,
My friend (@ikingblack on XDA) has released 2 guides as of now, and unfortunately, his guides are a little misleading, and has you flashing packages left and right. Hopefully, this time I will try to get it right. I am not trying to be rude, just trying to point out that his guides are a little scant and incomplete. And please feel free to leave bad comments so I can improve it.
All right. Enough of that yucky stuff. Here's the Guide:
Requirements:
1. Rooted Nook Color with ClockworkMod Recovery (3.0.0.10 or later)
2. An SDCard that is bigger than 200 MB.
3. A Browser on the Nook that has the option of downloading to the SDCard.
4. Internet Access on the Nook is not required (NO).
5. A flashable ROM for the Nook on your SDCarY
Notice: Whenever I say download a certain file, it means download it to your SDCard. It does not matter how you do it, just get it on there. You can download it on your Nook, or download it on your computer and put it on the SDCard. It really doesn't matter.
Step 1.
Make sure you have a valid backup that is current. If not, make one, either through ROM Manager or ClockworkMod.
Step 2. If you have dual booted before, than no need to do this step. If you haven't, this is a requirement. Just download this file: Download.
Step 2.
Download the stock Nook ROM flashable zip, I recommend this one: Download. It is the latest version and keeps ClockworkMod. Keep in mind that the package has to keep ClockworkMod. Then download the root file if you want root: Download. Finally, download the dual boot file: Download. Please remember the file names so you know what to flash. If you want, you can rename them.
Step 3. Boot into ClockworkMod, and go into "Mounts and Storage" (Use the Volume Buttons to scroll and the n or home button to select). Then select Format /System, and select yes. Then format Data.
Step 4. Press the Power button to go back, and select "Install zip from SDCard". Then select the second option or something like browse for zip. Find the first file downloaded, or the Stock Nook OS probably called update-nc-stock-1.2-keepcwm-signed.zip, and select it, then select yes.
Step 5. Once you are done, go back again, and select "Reboot System Now". It will boot into the stock Nook OS. It will ask you to setup your device, so go ahead and do it.
Step 6. If your Nook does not have internet at the current moment, and there is nothing that you can connect to, then hold the volume up button on the screen with the video. While holding it, tap the lower left of the screen, then the lower right. A button titled Factory should appear, and tap on that. Then while still holding the button, then tap the lower left. A button called Skip OOBE should appear, tap that and you should be at the homescreen.
Step 7. If you want root, then reboot into ClockworkMod. If you can't, or don't know how, then use the 8 failed boots method. 8 failed boots means boot it up, and before it reaches the logo, (The pulsing B&N Nook Color) shut it off holding the power button. Even though this takes long, I don't know of anything else.
Step 8. Flash the second file, or the root file called apk-signer-1a.zip or something. Then if there is anything else that you need to flash, then flash it. Please keep in mind that as of now Dalingrin's kernel should not work with it unless he releases an update. I haven't checked this, so please correct me if needed.
Step 9. Make sure it boots by going back and rebooting. If it doesn't boot hold the power button until it turns off, and power on again. If it works, than you can try downloading ROM Manager (Here (The first link) and rebooting into clockworkmod. If it doesn't work, than repeat step nine.
Step 9.5. If you have used @rookie1's dual boot method, than skip to step 10. If you haven't, then flash the file you downloaded in Step 2, the Prepare Dualboot file called prep-dualboot-0.1.zip.
Step 10. Flash the last package, the dual booter, probably called eclair-dualbootv2.zip or something. Flash it . Then reboot and hold the home button when it says multiuboot loading. It should load the nook os. If it loads correctly, then reboot into ClockworkMod again.
Step 11. Flash the ROM that you want dualbooting, and any other zip that you want. Then go back, and select backup and restore. Select Advanced Restore and select your latest backup. Then select restore data and restore data only. Once it is done, then you can reboot and it should reboot into your custom ROM (if you didn't hold the home button on boot).
You are now done! When you want to boot into the Nook OS, hold the home button when you power on and the nook says multiuboot loading. If you want to boot up your custom ROM, than don't hold the home button. You can also now get into ClockworkMod by holding both volume buttons when it says multiuboot loading. Please do not hesitate to post with complaints, improvements or the like. Thanks! I want to improve this and my knowledge in every way I can.
Credits:
@koush for ClockworkMod Recovery and Rom Manager which we all use at least weekly.
@HamNCheese for the root.
@rookie1 for the dual boot file
@nemith for the flashable stock
All of the developers who make dualbooting possible!
PS: PM me or post if I missed any credits!
Click to expand...
Click to collapse
Finally! This is what a guide looks like (no offense other guide guy)
ad720 said:
Worked for me...
The only issue was that after step 6 I could not get back into Clockwork and couldn't get the Rom manager apk to open.
I used a Clockwork bootable SD card with the 1.2 apk updated zip on it and that worked well for me.
Dual-booting Phiremod and Nook 1.2!
Click to expand...
Click to collapse
@ad720
Wait, so you can't root it? Have you tried Step 7?
Thanks @ace7196
Tried my best.
@ace. No offense taken. I can;'t always write perfect guides.
pndo1 said:
@ad720
Wait, so you can't root it? Have you tried Step 7?
Click to expand...
Click to collapse
No, I'm rooted. The issue was that I was unable to boot into clockwork after flashing the 1.2 zip that was supposed to keep clockwork intact. Since I hadn't flashed the root file yet I could install Rom Manager and flash Clockwork that way.
I just used a clockwork bootable microSD with the new Auto-nooter (and with the files from the OP on it) and flashed everything from there until I was rooted and could install ROM Manager. Worked fine and I'm dual booting Phiremod and rooted nook 1.2.
@ad720
I'll update the guide.
can't get phreakmod to boot, just loops
First off, thanks for the guide. It was a great help but I failed to make a backup of my rooted stock ROM and had to start all over again when I got to the end and had to restore the data only
Also I couldn't boot back into clockwork after loading 1.2. Even the 8 reboot method had no effect on my nook. I did some reading and came to the same conclusion as ad720 at about 1am last night and finally got it booting but couldn't get phreakmod version 6.1 to load. It just loops on the phreakmod boot screen. I was able to get the v4 of honeycomb and my stock rooted ROM to boot but no other ROMs seem to work.
I do have another question though. How do I know which ROM I am backing up with clockwork, or does it back up both ROMS as a dual boot backup?
Also, I want to keep my stock rooted nook for magazines and books but run phreakmod or maybe a newer ROM, do I have to go through the entire process again or can I just load a new ROM without screwing up my stock ROM?
Lastly, somehow mine ended up backwards, if I hold the "n" I get honeycomb, if I do nothing I get stock, which is fine at least it works, but I am not sure how it got reversed, I think I must have reversed a step when phreakmod wouldn't work and I had to redo it with honeycomb.
Normally I'd just keep messing with it until I got it figured out but I have already wasted well over 12hrs getting to this point so I have decided to breakdown and ask for assistance.
Any help or insight would be appreciated.
Thanks in advance
If you are fine with what you have, then you are ok. If you want to get CyanogenMod 7 or Phriemod with stock on a dual boot, then you will have to follow the guide again. I suggest you erase data, and system and then flash Phriemod. The backup problem is probably because you have an old version of Clockwork Mod Recovery, so try updating it via Rom Manager (Downloadable from the link in the op or from the Market). To update, just launch the app and click Flash ClockworkMod Recovery, then choose Nook Color, not Nook Color (old). Then, again from Rom Manager, tap "Reboot into Recovery" and then tap ok. After it reboots into ClockworkMod, then try your backup. Post if this works! If it does, I will put it in the op.
There are a lot of extra and unnecessary steps in this guide.
I did the entire process without having to reboot once last night, and didn't follow any posted guides except the original dual boot eclair guide.
Sent from my PC36100 using Tapatalk
Like what? If you would provide me with what could be removed, that would help a lot.
I have a question about backing up your rom when you boot from the SD card is there a process to do this?
Sent from my NookColor using XDA Premium App
You mean backup the ROM that you have on the SDCard?
pndo1 said:
Like what? If you would provide me with what could be removed, that would help a lot.
Click to expand...
Click to collapse
Once I put my kids to bed I will post my process.
Sent from my PC36100 using Tapatalk
working on it
Thanks for the quick reply. I have updated CWM to 3.0.2.8 that didn't help.
I reinstalled phiremod and it still just looped. I downloaded ver. 6.0 and tried that and it still looped.
I then wiped and started again this time with phiremod first and I'm sitting here watching it loop. Strange.
I'll keep trying different things and hopefully with report back with what worked for me.
thanks for the input.
jm
pndo1 said:
You mean backup the ROM that you have on the SDCard?
Click to expand...
Click to collapse
Yes back up my CM7 before trying this.
Sent from my NookColor using XDA Premium App
jm20 said:
Thanks for the quick reply. I have updated CWM to 3.0.2.8 that didn't help.
I reinstalled phiremod and it still just looped. I downloaded ver. 6.0 and tried that and it still looped.
I then wiped and started again this time with phiremod first and I'm sitting here watching it loop. Strange.
I'll keep trying different things and hopefully with report back with what worked for me.
thanks for the input.
jm
Click to expand...
Click to collapse
Did you just wipe or did you format system, data, and cache?
Sent from my PC36100 using Tapatalk
WHY DID THEY HIDE THE CAMERA TOGGLE BUTTONS???
I am stuck in a ROM.
CM-7.1.0-Backside-IHO-KANG.... that boots with a I.H.O animation...
I think it's evil. There was no Market APP on the phone? Pushed Market APK via SD card and it just force closes. Pushed ROM Manager via SD cardand it just force closes. Apps from other sources are enabled.
Without these apps I am stuck.
Recovery mode pretends to let me select options, but it always just loops and doesn't allow me to select any files to restore. A battery pull is always necessary.
Even recovery.flasher.v1.3 isn't recognized.
CM7 and MIUI were always smooth.
Any suggestions?
Never heard of the ROM you tried to flash and we don't have a miui ROM. Wrong device forum? For market try flashing gapps but seems like your recovery is borked so I can't help you there.
Sent from my LG-P500 using XDA App
To use Market you must have the GAPPS framework. This is a flashable zip that installs almost all Google apps on the market as well as their framework.
Edit: I saw your recovery problem, if the zip fails to flash, download the program I've attached (It's an .exe, just rename) and any recovery image you want (Must be *.img, if it's a zip, extract it), connect your phone in emergency mode (Power + Volume Up + Back), make sure the program recognizes the phone and, select the *.img in the "Recovery" field. Press "Download" and wait untill the phone reboots. After that you should have a fully functional recovery.
I'm stuck where even recovery flashers don't affect recovery mode. It just returns to a bonked recovery mode in which I can select something, but nothing happens once the option is selected.
I am still unable to flash GAPPS or anything to this phone.
Right now it's just bare bones and I can't un Market or ROM Manager to make it a functional phone.
Try to install the latest official firmware (Search the dev section for 2.3 KDZ)
Very fine ROM , but you need to flash the Gapps Zip, either the 6/16 or 8/20 version. It will have you log in to your Google Market and downloadd your Titanium Backup / Restore to retrieve all of your Apps. and Data (DO NOT RESTORE ANY SYSTEM FILES). Enjoy.
never heard of this rom. some details?
CM-7.1.0-BACKside-IHO-KANG
Alcohol can be a mind numbing good-time.
You know, I just rediscovered them camera toggle buttons that I used a few months back.
The ROM is fine. I just drink too much...
Hey guys,
Got a no name phone with mtk6580 and kernel 3.10.72 running custom Chinese android 5.1, and as you probably guessed I got problem flashing custom recovery on it, the device is not on the list for neither TWRP nor CWP.
What to do?
Thank you
Vant2239 said:
Hey guys,
Got a no name phone with mtk6580 and kernel 3.10.72 running custom Chinese android 5.1, and as you probably guessed I got problem flashing custom recovery on it, the device is not on the list for neither TWRP nor CWP.
What to do?
Thank you
Click to expand...
Click to collapse
A good place for no name phones is here:
https://forum.hovatek.com/forum-76.html
Either have a search or put a request for someone to make a TWRP for your phone, I put a request in and the next day someone made one for me.
I did try to make my own from a guide on here, its apparently really easy but I just couldnt get it to work, here is the one someone made for me which may work or at least gives you a good starting base to try: http://www.needrom.com/download/uhappy-up580-twrp-recovery/
robneymcplum said:
A good place for no name phones is here:
https://forum.hovatek.com/forum-76.html
Either have a search or put a request for someone to make a TWRP for your phone, I put a request in and the next day someone made one for me.
I did try to make my own from a guide on here, its apparently really easy but I just couldnt get it to work, here is the one someone made for me which may work or at least gives you a good starting base to try: http://www.needrom.com/download/uhappy-up580-twrp-recovery/
Click to expand...
Click to collapse
Once again thanks a lot for reply!
I have successfully ported one of your builds, but with some mindless actions trying to flash recovery through fast boot got a boot loop of some sort, logo keeps appearing and phone doesn't boot.
What I did is in fastboot flashed recovery with help of 'fastboot oem unlock' and now I just stuck. I have stock recovery, tried to flash it back but unsuccessfuly. Any idea how can I fix it?
Sorry for being such a noob
recovery and/or firmware should be flashed with SPflash tool simply because I find its the easiest way,
Perfect way of doing things is:
SPflash tools=flash stock firmware til 'done' close SPflash
remove battery, put back in, boot, maybe stuck on boot image (happens to me 50% of the time)
remove battery, put back in, boot. Let it boot up and set up wifi/internet
turn off phone, battery out, back in DONT POWER ON
reopen SPflash, select correct scatter.txt file from stock firmware again
unselect all tick boxes, tick recovery box, click on 'address or location of recovery' and locate the TWRP image
click download, plug turned off phone in.
wait til done.
battery out, back in, boot to recovery with correct button presses (volume up+power?)
in recovery, set correct time
reboot recovery and allow install of superSU, reboot phone, select superSU from the notification and update.
Then put the new custom rom onto sdcard and reboot back to recovery, wipe system/data/cache/dalvik cache and install rom
install gapps
wipe caches
reboot
That is a perfect way of doing it, if the rom doesnt boot something is wrong with the rom/boot img/something
fix that, put back onto sdcard, just do the 4 wipes again and install rom again
and again
and again
until it is fixed and boots.
robneymcplum said:
recovery and/or firmware should be flashed with SPflash tool simply because I find its the easiest way,
Perfect way of doing things is:
SPflash tools=flash stock firmware til 'done' close SPflash
remove battery, put back in, boot, maybe stuck on boot image (happens to me 50% of the time)
remove battery, put back in, boot. Let it boot up and set up wifi/internet
turn off phone, battery out, back in DONT POWER ON
reopen SPflash, select correct scatter.txt file from stock firmware again
unselect all tick boxes, tick recovery box, click on 'address or location of recovery' and locate the TWRP image
click download, plug turned off phone in.
wait til done.
battery out, back in, boot to recovery with correct button presses (volume up+power?)
in recovery, set correct time
reboot recovery and allow install of superSU, reboot phone, select superSU from the notification and update.
Then put the new custom rom onto sdcard and reboot back to recovery, wipe system/data/cache/dalvik cache and install rom
install gapps
wipe caches
reboot
That is a perfect way of doing it, if the rom doesnt boot something is wrong with the rom/boot img/something
fix that, put back onto sdcard, just do the 4 wipes again and install rom again
and again
and again
until it is fixed and boots.
Click to expand...
Click to collapse
Im getting an error when try to flash it: ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
trying to flash stock firmware?
I had numerous issues getting mine to flash the first time, I downloaded and tried different versions of SPflash tools, different USB leads/ports etc...
I have to use a USB lead from my moto x play as the stock lead wouldnt work, my galaxy tab lead wouldnt work either.
I have to use SPflash tool version SP_Flash_Tool_exe_Windows_v5.1552.00.000 as other versions kept bringing up that error and similar ones.
It really does seem to be trial and error unfortunately.