Hey guys, i flashed JoelDroid ROM and it flashed the modem too. I came back to stock from the nandroid backup but still donot have the modem back.
Can u please let me know the version of the modem that is default for INDIA?
There is no "default" modem, the modem you got your phone with depends on when you got the phone and what carrier you're on mostly.
bittu4u4ever said:
Hey guys, i flashed JoelDroid ROM and it flashed the modem too. I came back to stock from the nandroid backup but still donot have the modem back.
Can u please let me know the version of the modem that is default for INDIA?
Click to expand...
Click to collapse
If you came back to your 4.0.3 stock rom as in your sig then most likely your rom is: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7. In red is your default modem ver.: DDLPA. Complete pckage of the modem + RIL files you can get from HERE
For the newest stock rom for your country (ICS XWLPW) modem would be DDLPB. Regards
Many40 said:
If you came back to your 4.0.3 stock rom as in your sig then most likely your rom is: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7. In red is your default modem ver.: DDLPA. Complete pckage of the modem + RIL files you can get from HERE
For the newest stock rom for your country (ICS XWLPW) modem would be DDLPB. Regards
Click to expand...
Click to collapse
Thanks alot... Very much thanks for the link.. i was searching for that since lotta time back...
Related
Bought an S2 today. Its a UK Orange phone.
Here's what I did.
Installed an insecure BVKE2 using Odin (original fw was same)
Rooted it, then installed CWM
Installed HyperDroid
Now when the phone booted, it has the HyperDroid rom. However, the baseband still shows the old BVKE2 version.
Does that matter? How do I change that to a newer version? Will I lose root if I flash some firmware via Odin?
Please give a detailed reply
ASKnASK said:
Bought an S2 today. Its a UK Orange phone.
Here's what I did.
Installed an insecure BVKE2 using Odin (original fw was same)
Rooted it, then installed CWM
Installed HyperDroid
Now when the phone booted, it has the HyperDroid rom. However, the baseband still shows the old BVKE2 version.
Does that matter? How do I change that to a newer version? Will I lose root if I flash some firmware via Odin?
Please give a detailed reply
Click to expand...
Click to collapse
flash via CWM
http://forum.xda-developers.com/showthread.php?t=1131950
yes..you will lose root after flash newer firmware thru ODIN
ASKnASK said:
Bought an S2 today. Its a UK Orange phone.
Here's what I did.
Installed an insecure BVKE2 using Odin (original fw was same)
Rooted it, then installed CWM
Installed HyperDroid
Now when the phone booted, it has the HyperDroid rom. However, the baseband still shows the old BVKE2 version.
Does that matter? How do I change that to a newer version? Will I lose root if I flash some firmware via Odin?
Please give a detailed reply
Click to expand...
Click to collapse
The baseband of your phone is nothing but the modem or the software that communicates with the network. It is usually flashed separately from the ROM unless it is part of the CWM update file.
All modems work differently with networks and you will need to figure out which one is best for your needs. Certain ROM's such as CheckROM come with kitchen apps that allow you to download and apply modems from within the ROM.
Check this link for more info.
Cheers!
Thanks a lot man So I am just gonna flash a new modem and that baseband will change, right?
ASKnASK said:
Thanks a lot man So I am just gonna flash a new modem and that baseband will change, right?
Click to expand...
Click to collapse
Yep, you got it!
s2 problem
help me my samsung galaxy s2 build number is i9100XXLPX i tried to find a fimware for this so i think i need to change my baseband to make it able to upgrade plss help me to change it can someone make a video how to change baseband?
Make you a video ???!! Nobody's going to make you a video. Search, read, learn. Or not.
hi guys,
i've tried few other roms, XXLPH recently and it changed my Baseband to XXLPH. i recovered my phone back to original Stock ROM 2.3.5 (XWKJ1) where my baseband was XXKI4, everything is like it was before except the baseband, which is still XXLPH. is it possible to somehow flash only the baseband without wipeing the phone with stock rom via Odin ? everything seems to be working so do I even need to flash it ? also, I don't really understand what that Baseband does.
thank you
Most of the ROMs don't include a baseband / modem / radio, so you can flash what you want separately. If you cand find an Odin flashable modem file, then you can change only that, without any other modifications. There are also CWM flashable ones, which is much easier than with Odin.
ok, got it.. so the question is, do I need to change it back to KI4 if everything is working with LPH (and my battery seems to live longer with LPH) although LPH is for ICS 4.0.3 and KI4 is for GB 2.3.5 which i have now ? thanks
//and where can I get these ? in Odin it is Modem button right ? and in CWM it is update.zip, so I just need my XXKI4, any ideas ? thanks
If it works leave it .
Modem files are in the Modem thread in dev section .
jje
ok, i found them.. but the second question please
Sent from my GT-I9100 using XDA app
amozonesk said:
ok, i found them.. but the second question please
Sent from my GT-I9100 using XDA app
Click to expand...
Click to collapse
You are right . In odin it's the "modem".And in CWM it's a ZIP file(whether it's name is Update doesn't matter)
thank you all
can i flash a ki3 modem into the xwlp2 (ics) software? will there be any conflicts? thanks!
Hi i think you can flash anymodem to any rom.
Im from australia and i have flashed my locacl vodafone modem to the latest lpq rom and it works fine.
dizzydz said:
can i flash a ki3 modem into the xwlp2 (ics) software? will there be any conflicts? thanks!
Click to expand...
Click to collapse
Any modem is flash-able if it is made specifically for your Phone's model (I assume GT-i9100)...
I have just successfully flashed XXKI3 into XWLP2 ICS . I'll let you guys know if the signal improves, cause the stock one sucked!
dizzydz said:
I have just successfully flashed XXKI3 into XWLP2 ICS . I'll let you guys know if the signal improves, cause the stock one sucked!
Click to expand...
Click to collapse
Could you let me know where you got the xwlp2 modem from please ?
Pretty simple question here. I searched the forums before starting this thread, but I got contradicting results...
I have Stock Samsung ICS 4.0.4 XWLPW on my GT-I9100. It has the default modem for my country, but I want to flash KH3 modem on it for better reception and battery life. Is it possible? (I didn't wanna try as last time I lost my CSC when I was flashing another modem and then did nandroid restore... )
I hope to get a reply.
Thanks!
jj_95nano said:
Pretty simple question here. I searched the forums before starting this thread, but I got contradicting results...
I have Stock Samsung ICS 4.0.4 XWLPW on my GT-I9100. It has the default modem for my country, but I want to flash KH3 modem on it for better reception and battery life. Is it possible? (I didn't wanna try as last time I lost my CSC when I was flashing another modem and then did nandroid restore... )
I hope to get a reply.
Thanks!
Click to expand...
Click to collapse
u can as long as u get a tar file (or the Modem.bin file of KH3) of the same to flash vide ODIN, if ur Stock 4.0.4 is not rooted.
If rooted with a wrk'ng CWM then u can flash the Zip version which is easily available
Hey,
Just flash trough Odin(If tar) or CWM(if zip) And nothight bad will happen..
Just do NANDRIOD BACKUP
I flashed modem many times and and nothing happened..
Sun90 said:
u can as long as u get a tar file (or the Modem.bin file of KH3) of the same to flash vide ODIN, if ur Stock 4.0.4 is not rooted.
If rooted with a wrk'ng CWM then u can flash the Zip version which is easily available
Click to expand...
Click to collapse
Paulius7 said:
Hey,
Just flash trough Odin(If tar) or CWM(if zip) And nothight bad will happen..
Just do NANDRIOD BACKUP
I flashed modem many times and and nothing happened..
Click to expand...
Click to collapse
What about RIL? Should I use GetRIL? According to certain users, they loose signal if they match baseband and RIL using GetRIL...
I don't know if my getRIL matches but I have good signal So Do if you want.
P.S. I Created my Rom so I edited settings in What I want and my battery life is good
Paulius7 said:
I don't know if my getRIL matches but I have good signal So Do if you want.
P.S. I Created my Rom so I edited settings in What I want and my battery life is good
Click to expand...
Click to collapse
So i went ahead and flashed KH3. Everything is fine but Ril and baseband don't match. As of now I have excellent ovenight battery drain. Lost just 2% over 9hrs that the phone was left sleeping. I just hope that I won't face any problems
due to the mismatch...
Sent from my Bathtub using bubbles
Like I said
Send form Galaxy S2. But I don't have it :-\
Hey guys I'm a noob here and I need the i9300 xxddlk1 zip for clockworkmod, my problems started when I flashed omega rom it changed my baseband to the EU one, I was able to find the Indian baseband for my device but it was the old xxdlib baseband for 4.1.1, now I need the new baseband and ril xxdlk1 can you please get me a clockworkmod flash able zip of the xxdlk1 l baseband and ril I am currently running paranoid android 3 4.2.1 so is it fine if I use the old baseband? WiFi works fine, but I'm scared that when I get a Sim card it won't work please help!!
mumbai52 said:
Hey guys I'm a noob here and I need the i9300 xxddlk1 zip for clockworkmod, my problems started when I flashed omega rom it changed my baseband to the EU one, I was able to find the Indian baseband for my device but it was the old xxdlib baseband for 4.1.1, now I need the new baseband and ril xxdlk1 can you please get me a clockworkmod flash able zip of the xxdlk1 l baseband and ril I am currently running paranoid android 3 4.2.1 so is it fine if I use the old baseband? WiFi works fine, but I'm scared that when I get a Sim card it won't work please help!!
Click to expand...
Click to collapse
Modem/ Ril threads .
jje
@jje I tried the ril/modem threads that's where I got the old baseband from they don't have the new baseband, please help I tried looking everywhere for a clockwormod flash able zip!! They have every baseband for 4.1.2 except my Indian baseband. Also another question I had was is it OK to use the old modem or will I face problems
Sent from my GT-I9300 using xda app-developers app
mumbai52 said:
@jje I tried the ril/modem threads that's where I got the old baseband from they don't have the new baseband, please help I tried looking everywhere for a clockwormod flash able zip!! They have every baseband for 4.1.2 except my Indian baseband. Also another question I had was is it OK to use the old modem or will I face problems
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Just wondering if it's possible to extract the modem from the firmware and flash it with Odin or mobile Odin?
I was also wondering, I made a nandroid backup of my original 4.1.2 ROM the only problem is it's on the new baseband which I don't have, will it cause any no baseband errors? Please help!!!???
Sent from my GT-I9300 using xda app-developers app
Yu can pull a modem and flash it .
Or download a cwm zip modem and replace the modem inside .
RIL possibly use GetRil from the market .
JJE