[Q] revert back to stock kernel - Galaxy Ace S5830i Q&A, Help & Troubleshooting

i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center

andy_android said:
i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center
Click to expand...
Click to collapse
Download firmware on samfirmware
Flash via Odinv3.07

With Odin3 v1.87:
1. Put the file in PDA section, or split it with SplitFus and put the:
Code:
PDA in PDA.
MODEM in PHONE.
CSC in CSC.
2. Tick "Re-Partition" and "Phone Bootloader Update", make sure that "Auto Reboot" and "F. Reset Time" are also checked, and "Flash Lock" and "Phone EFS Clear" NOT !!!!!
3. Put the PIT file in PIT section.
4. Connect your phone to your computer and go into Download Mode (Vol-up + Vol-down + Power).
5. Click "Start!".
6. WAIT FOR THE LEFT ABOVE SQUARE UNTIL IT GET YELLOW WITH "PASS!", BEFORE YOU DISCONNECT YOUR PHONE FROM YOUR COMPUTER !!!!!
Click to expand...
Click to collapse
With Samsung Kies:
I don't know and don't ask me how !!
Click to expand...
Click to collapse
Sent from my GT-S5830i using xda premium

RubenStauttener said:
With Odin3 v1.87:
With Samsung Kies:
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
Why using Odin 1.87
When we have Odin 3.07
Which does not require multi package files

andy_android said:
i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center
Click to expand...
Click to collapse
download Samsung KIES and odin and then pda.tar
instal your divice in your pc with kies and then conect the usb put volume up and down and power buton
and then open the pda.tar in pda
(i can't give you link but you can find easy.

RubenStauttener said:
With Odin3 v1.87:
With Samsung Kies:
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
can i directly put d md5 file dwlded from samfirmware in pda section???

andy_android said:
can i directly put d md5 file dwlded from samfirmware in pda section???
Click to expand...
Click to collapse
Yes but you should have Odin3v3.07
Not Odin3v1.87
http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html

Can anybody pls give me step by step how to go back stock kernel with links?
I am really noob in samsung phones.
Sent from my Xperia Arc S using Tapatalk 2

Go to section 3 of this thread and read through the guide. Follow the guide carefully and you'll be fine. Good luck http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my Nexus 7 using xda app-developers app

Here it is just go to recovery and apply update from sd card then choose stock kernel.zip then choose modules and reboot enjoy your stock kernel

Gamerz_04 said:
Here it is just go to recovery and apply update from sd card then choose stock kernel.zip then choose modules and reboot enjoy your stock kernel
Click to expand...
Click to collapse
Thank you very much sir it work for my s5830i now i am agine able to get warrenty
thanks....

Related

"Issue Resolved" HELP I think i just bricked my phone

Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
wanewon said:
Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
Click to expand...
Click to collapse
well would suggest u to reflash ur stock firmware once again from Odin
Sun90 said:
well would suggest u to reflash ur stock firmware once again from Odin
Click to expand...
Click to collapse
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
wanewon said:
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
Click to expand...
Click to collapse
check the link below for the same
http://forum.xda-developers.com/showthread.php?t=1075278
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
wanewon said:
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
Click to expand...
Click to collapse
no need to unroot ma8, since flashing stock firmware will automatically unroot ur phone, after that if u need root then u can always do so
ps- ensure that u dwnld the proper firmware meant for ur device(if its I9100 then the one corresponding to it) and follow the ODIN instruction carefully for a successfull flash
1). Download official firmware for your device from samobile.com , Google and download Odin .
2) Extract the zip downloaded from samobile . It will be a .tar or .tar.md5 file.
3) Boot into Odin mode like u did earlier
4) Run Odin and connect your device . Odin will detect and will show the port number.
5) In PDA ,select the extracted file.
Don't change any other option .
6) Press Start
Odin will flash the binary . Wait till process is complete. On completion it shows pass.
Your phone will boot automatically.
Sent from my GT-I9100G using xda app-developers app
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
wanewon said:
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
Click to expand...
Click to collapse
yes, its the one
Sun90 said:
yes, its the one
Click to expand...
Click to collapse
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
wanewon said:
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
Click to expand...
Click to collapse
which kernel file?
Sun90 said:
which kernel file?
Click to expand...
Click to collapse
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
wanewon said:
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
Click to expand...
Click to collapse
yeah thats is the stock kernel.
first try to flash the firmware file which u have extracted
plz delete
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
wanewon said:
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
Click to expand...
Click to collapse
flash the kernel and see now
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
wanewon said:
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
Click to expand...
Click to collapse
may be, try dwnlding a diff firmware and see:good:
check this link below for the same
http://forum.xda-developers.com/showthread.php?t=1544487
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
wanewon said:
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
Click to expand...
Click to collapse
dont worry dude as long as ur able to get into dwnld mode ur safe, only thing is to flash the firmware right

[Q] ODIN Complete(Write) Failed

Im running Resurrection Remix 3.0.4 (Lastest) and the 5.66 Dorimanx Kernel.
My problem is when i try and boot into CWM the phone freezes, and when i try and use Odin i get Zimage and then a redbox with the words FAIL appear and Complete(write) failed. Is there a solution in Odin that i can do to change my kernel?
noscentsbrad said:
Im running Resurrection Remix 3.0.4 (Lastest) and the 5.66 Dorimanx Kernel.
My problem is when i try and boot into CWM the phone freezes, and when i try and use Odin i get Zimage and then a redbox with the words FAIL appear and Complete(write) failed. Is there a solution in Odin that i can do to change my kernel?
Click to expand...
Click to collapse
u can try flashing the .tar file of siyah kernel thro Odin and see
Sun90 said:
u can try flashing the .tar file of siyah kernel thro Odin and see
Click to expand...
Click to collapse
I Tried with the latest Siyah the 4.1Rc1 and same thing happened
noscentsbrad said:
I Tried with the latest Siyah the 4.1Rc1 and same thing happened
Click to expand...
Click to collapse
well then u can try this.
1)turn off ur phone.
2)then HOLD Volup+home+pwrbutton simultaneously till u enter recovery.
3)if ur able to enter recovery then from there Wipe cache / dalvik and do fixpermission and then reboot and check
Sun90 said:
well then u can try this.
1)turn off ur phone.
2)then HOLD Volup+home+pwrbutton simultaneously till u enter recovery.
3)if ur able to enter recovery then from there Wipe cache / dalvik and do fixpermission and then reboot and check
Click to expand...
Click to collapse
when i try and enter CWM it freezes?
noscentsbrad said:
when i try and enter CWM it freezes?
Click to expand...
Click to collapse
then the only option left is to flash a official firmware from ODIN and see
Sun90 said:
then the only option left is to flash a official firmware from ODIN and see
Click to expand...
Click to collapse
Do u have a link?
noscentsbrad said:
Do u have a link?
Click to expand...
Click to collapse
visit www.sammobile.com u will get all the firmwares (stock) for ur GT I9100 there
Sun90 said:
visit www.sammobile.com u will get all the firmwares (stock) for ur GT I9100 there
Click to expand...
Click to collapse
will that work tho? my android version is 4.1.1
noscentsbrad said:
will that work tho? my android version is 4.1.1
Click to expand...
Click to collapse
no problem u will have stock ICS firmware installed, then u have to re-root ur phone to install rr jb v3.0.4
as sun90 said u have to flash the stock rom back and then root it again
find ur stock rom here : www.samfirmware.com
or
checkfus downloader (Only downloads the latest roms from the server)
neerajganga said:
as sun90 said u have to flash the stock rom back and then root it again
find ur stock rom here : www.samfirmware.com
or
checkfus downloader (Only downloads the latest roms from the server)
Click to expand...
Click to collapse
so, how do i install via odin? never installed a rom over odin before
noscentsbrad said:
so, how do i install via odin? never installed a rom over odin before
Click to expand...
Click to collapse
yes use odin
download ur stock firmware from samfirmware or checkfus
then start odin (Kill all kies precess before flashing)
the current firmware jus have 1 file so insert it in pda ..
connect ur phone in download mode VOL DWN + HOME + POWER
connect usb
odin shud detect and show a yellow rectangle shwin the port connected
once done and ready hit start and wait for it to finish
Need any help pm me
When I tried flashing my Galaxy S II (using the instructions here http://forum.xda-developers.com/showthread.php?t=1274337 ) I must have done something wrong
When writing, it froze, and now my phone is stuck on the "Firmware upgrade encountered an issue" screen. I tried the emergency recover through KIES, but KIES can't seem to detect the phone. I cant reenter download mode or the recovery mode.
Anyone have any suggestions?
repair Firmware upgrade encountered an issue
Keeyakanze said:
When I tried flashing my Galaxy S II (using the instructions here http://forum.xda-developers.com/showthread.php?t=1274337 ) I must have done something wrong
When writing, it froze, and now my phone is stuck on the "" screen. I tried the emergency recover through KIES, but KIES can't seem to detect the phone. I cant reenter download mode or the recovery mode.
Anyone have any suggestions?
Click to expand...
Click to collapse
open odin again, set up as normal only select pda , enter pda file you tried earlier, switch on the phone, let it boot till the message you get is on screen reconnect the phone to odin and press start, wiat till it says pass and the phone should reboot :good: hope it helps, worked for me

[Q] Stuck in boot loop after rom manager

Hello i have a problem i rooted flashed and installed my samsung galaxy s2 gt-i9100 with clockworkmod and ICS cyanogenmod but i had problems becouse the sim was not regonized meaning it had the sim simply showed no signal ,, i thought it was a problem of the rom and from rom manager downloaded and flashed a cyanogenmod 7 rom and when one since the phone did not start up it is in a boot loop and i can only access the download mode the phone is still roted becouse si rooted yeallow tiangle with a ! has not gone and when in download mode it reads ODIN on top..What should i do to restore proper funcion can anyone help pls
Thnx in advance
go into recovery mode and wipe data/factory reset
Also never use rom manager again. It doesn't work with the I9100.
Sent from my GT-I9100 using xda premium
HANDSY said:
Also never use rom manager again. It doesn't work with the I9100.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
+1
Sent from my Nexus 7 using xda premium
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
You should press Vol+ + Home + Power.
Try flashing the kernel(.tar) with odin you used in C7 and see if that lets you into recovery or boots up.
Or you may have to get a stock rom for your model/region etc off sammobile and flash with odin.
That rom manager once gave me 4 hours work on my x10i.....
Sent from my GT-I9100 using xda premium
Hi!
That happened to me once. I used odin to flash stock rom and solved the problem. Don't use rom manager... It only gives trouble.
Cheers!!
sorry to bother but how do i flash to stock rom??
gjergjisel said:
sorry to bother but how do i flash to stock rom??
Click to expand...
Click to collapse
Go to www.sammobile.com download a stock firmware, flash through Odin.
Sent from my Nexus 7 using xda premium
gjergjisel said:
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
Click to expand...
Click to collapse
Hi' you really shouldn't worry and try to avoid flashing stock rom. you flashed GB rom over ICS rom and the problem is your data is full of stuff that's preventing you from booting the rom. You're tryong to go into recovery the wrong way. Hold together voulme up (NOT down) + home + power and it should boot your recovery just fine. Then just wipe data. the rom should boot if it was installed. If not download another rom and flash it through recovery.
Cheers
gjergjisel said:
the problem is i cant go into recovery becouse when i boot up using power home and volume down it comes into download mode not in recovery mode
Click to expand...
Click to collapse
Recovery: Volume Up + Power + Home
Download Mode : Volume Down + Power + Home
kilometers4 said:
Go to www.sammobile.com download a stock firmware, flash through Odin.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
i dont quite get whitch rom i should download from sam mobile i got one for the GT-I9100 whitch was my model even thou it was writen GT-I91000 in samobile and there are 4 files in there plus 2 of the odin package ,, can someone please link me to some simple guide how do i flash this whith odin and whitch files to chose , i think as it is my phone needs to be reformated totally
thank you
gjergjisel said:
i dont quite get whitch rom i should download from sam mobile i got one for the GT-I9100 whitch was my model even thou it was writen GT-I91000 in samobile and there are 4 files in there plus 2 of the odin package ,, can someone please link me to some simple guide how do i flash this whith odin and whitch files to chose , i think as it is my phone needs to be reformated totally
thank you
Click to expand...
Click to collapse
plus i think i did something rom with the rom from sammobile and now i get the screen where it says firmware upgrade has encountered an issue please select recovery mode in kies & try again
is there some way to totally wipe the phone and make a new clean install ,,,

[Tutorial] How to Unbrick/Flash Official Firmware on Samsung Galaxy Ace S5830i Using

How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
we already have unbrick tutorial..
any help is appriciated...but please search before u post...
there is already a guide in general section stickies...
Sent from my GT-S5830i using xda app-developers app
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Had a bricked bootlooped s5830i laying somewhere, it is fixed now! thanks!
Cant unbrick
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
FirsThink2000 said:
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
Click to expand...
Click to collapse
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Hitesh2626 said:
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Click to expand...
Click to collapse
Hi! I was try it, and its works!!! TNX A LOT!!!!
FirsThink2000 said:
Hi! I was try it, and its works!!! TNX A LOT!!!!
Click to expand...
Click to collapse
Don't just say thanks, hit his thanks button! :silly:
odin3 1.84 stuck at <ID:0/005>setupconnection...
not working
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Flash013 said:
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Click to expand...
Click to collapse
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
ChelebiTech said:
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
Click to expand...
Click to collapse
I already did that ...it didn't help!
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
aakifnouman said:
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
Click to expand...
Click to collapse
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
aakifnouman said:
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
Click to expand...
Click to collapse
Yes their are some Kernels for both model ,for flashing them just the steps are given in there Original posts they are simple just need to flash them via CWM
Sent from my GT-S5830i using xda app-developers app
Help me
I try to do what you said above, but Odin has to step it
<ID:0/004> NAND Write Start!
<ID:0/004> BcmCP.img
<ID:0/004> boot.img
<ID:0/004> system.img
I attached a picture to see more precisely. What should I do not get any phone in recovery mode (Power On + Volume Up + Home).
HELP ME.
Works great. +1
hey man,
im a newbie here, can you help me unbrick my galaxy ace s5830i , ived looked at several how to tutorials but im just haveing a problem on finding an australian stock rom for my phone! , please help , it would be a pleasure
Please help!
Hi guys,
I'm a newbie, and I decided to root my phone yesterday. Once it was rooted successfully, i tried flashing a couple of ROMS (Ace of spades & Slimbean) and both didn't work because of an rror in the file. I then downloaded Razodroid 2.5, and insatlled it (after installing CWM 5), it said installation complete and i tried to reboot my phone, but its stuck on the logo screen. I've looked at so many different tutorials to unbrick it, downloaded all the different setups needed, but the problem is that it just won't go into recovery.
If i press down all the buttons, the logo comes on once, and then just stays blank for as long as i hold the buttons down, and if i let go of the buttons the logo comes up again and stays there.
I tried doing it through ODIN, but if it won't go in to recovery mode how do i get it to work? It doesn't even connect to the computer.
Please help me, I am really upset and frustrated by this, and no longer have a phone. I am at my wits end. Please tell me how to fix this.

stock recovery? ?

can anyone provide me latest inu stock recovery zip only...
or command by which stock recovry zip can be taken...thnx in advance
Sent from my GT-I8552 using XDA Premium 4 mobile app
lokeshtak said:
can anyone provide me latest inu stock recovery zip only...
or command by which stock recovry zip can be taken...thnx in advance
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hey lokesh i have odin flashable stock recovery but its for mh1
but u can flash it anyway
http://d-h.st/hcA
Oh yea here is latest recovery image m1 one inu firmware:- http://d-h.st/j3W
Jaspreet_Singh said:
hey lokesh i have odin flashable stock recovery but its for mh1
but u can flash it anyway
http://d-h.st/hcA
Oh yea here is latest recovery image m1 one inu firmware:- http://d-h.st/j3W
Click to expand...
Click to collapse
thnx jasp bro....
u r life saver....
bro one more question. ..first file is odin flashable and second is img. file...currently I m on m1 so is it safe to flash mh1 recovery over m1 frimware..and second img file so how to convert it into tar file
Sent from my GT-I8552 using XDA Premium 4 mobile app
and after that binery count go to zero or not?
means device status being official or not??
Sent from my GT-I8552 using XDA Premium 4 mobile app
lokeshtak said:
thnx jasp bro....
u r life saver....
bro one more question. ..first file is odin flashable and second is img. file...currently I m on m1 so is it safe to flash mh1 recovery over m1 frimware..and second img file so how to convert it into tar file
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
use first file only it will work in odin
i uploaded second file is for development purposes
just flash first file ,remember auto reboot and f.reset time shud be checked
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
lokeshtak said:
and after that binery count go to zero or not?
means device status being official or not??
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Use triangle away app to reset binary counts to zero and it will make ur odin mode status to official
http://d-h.st/c7Y
Jaspreet_Singh said:
use first file only it will work in odin
i uploaded second file is for development purposes
just flash first file ,remember auto reboot and f.reset time shud be checked
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
Use triangle away app to reset binary counts to zero and it will make ur odin mode status to official
http://d-h.st/c7Y
Click to expand...
Click to collapse
bro can I flash mh1 recovery over m1 frimware?
is it safe??
Sent from my GT-I8552 using XDA Premium 4 mobile app
lokeshtak said:
bro can I flash mh1 recovery over m1 frimware?
is it safe??
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yup bro its safe
i will work
if u want i can give u m1.tar too
but u shud use that one
and i recommend u to flash that stock one with auto reboot and f.reset time check
when it reboots now u r on ur homescreen
remove battery go to download mode
http://forum.xda-developers.com/showthread.php?t=2494471
check steps by steps
do slowly and be patience
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and go to Recovery Mode (Volume UP And Home And Power Button all
together and when it vibrates release Power Button but keep pressing left ones).
GUESS WHAT :- U r in CWM Recovery
Jaspreet_Singh said:
yup bro its safe
i will work
if u want i can give u m1.tar too
but u shud use that one
and i recommend u to flash that stock one with auto reboot and f.reset time check
when it reboots now u r on ur homescreen
remove battery go to download mode
http://forum.xda-developers.com/showthread.php?t=2494471
check steps by steps
do slowly and be patience
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and go to Recovery Mode (Volume UP And Home And Power Button all
together and when it vibrates release Power Button but keep pressing left ones).
GUESS WHAT :- U r in CWM Recovery
Click to expand...
Click to collapse
thnx....bro
I would be nice if u provide m1 recovery
Sent from my GT-I8552 using XDA Premium 4 mobile app
lokeshtak said:
thnx....bro
I would be nice if u provide m1 recovery
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
here it is http://d-h.st/eDk
Jaspreet_Singh said:
here it is http://d-h.st/eDk
Click to expand...
Click to collapse
thnx bro....
Sent from my GT-I8552 using XDA Premium 4 mobile app
lokeshtak said:
thnx bro....
Sent from my GT-I8552 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
welcome
Thanks man! :good:
danmonteiro said:
Thanks man! :good:
Click to expand...
Click to collapse
pressing thanks will be appreciated
jassudani3 said:
Hey Jaspreet...,,,
I AM HAVING GT-I8552 QUATTRO...IF I USE CWM FOR ROOTING AND APPLY IT USING ODIN, THEN CAN I RESTORE STOCK ONE BY STOCK FIRMWARE FROM SAMMOBILE SITE USING ODIN??????
AND ALSO CAN WE NOT JUST ROOT BY PUTTING SU.ZIP IN SD AND UPDATING IT WITHOUT USING CWM RECOVERY????
AND IF BY MISTAKE I HARD BRICK MY FONE......CAN I RESTORE IT BACK 2 NORMAL CONDITION BY ODIN ND STOCK FIRM.?????
PLS HELP KAR YAAR JASPREET......PLS REPLY!!!!!PLEASE
Click to expand...
Click to collapse
U cant use stock recovery as it wont recognize sd card, u may try it and check urself. And yes u can restore to factory condition. And there is a app called kingo root, u can use it to root ur device by a single click without flashing cwm.
Sent from my GT-I8552 using Tapatalk
jassudani3 said:
Hey Jaspreet...,,,
I AM HAVING GT-I8552 QUATTRO...IF I USE CWM FOR ROOTING AND APPLY IT USING ODIN, THEN CAN I RESTORE STOCK ONE BY STOCK FIRMWARE FROM SAMMOBILE SITE USING ODIN??????
AND ALSO CAN WE NOT JUST ROOT BY PUTTING SU.ZIP IN SD AND UPDATING IT WITHOUT USING CWM RECOVERY????
AND IF BY MISTAKE I HARD BRICK MY FONE......CAN I RESTORE IT BACK 2 NORMAL CONDITION BY ODIN ND STOCK FIRM.?????
PLS HELP KAR YAAR JASPREET......PLS REPLY!!!!!PLEASE
Click to expand...
Click to collapse
check this http://forum.xda-developers.com/showthread.php?t=2494471
you u can restore stock with only CWM
putting su.zip wont work cus the mounting point is not there in stock recovery of our phone of sd card and externel card
just keep firmware to get back to normal
check this http://forum.xda-developers.com/showthread.php?t=2433941
jassudani3 said:
Also i wanted to know if i change ini.d or kernel or any other files similar like this, then can i restore the stock ones by simply flashing stock firm through odin......?????
pls reply
Click to expand...
Click to collapse
You can get latest kernel and latest firmware both and then u can flash them and get ur phone as was in box.. but efs partition is the only thing that is most important. Before u do anything take backup of efs but I dont know how to do. If u lost ur efs once then u cant get it back. Except it, u will get everything as factory condition.
Sent from my GT-I8552 using Tapatalk
jassudani3 said:
What is efs.....i will also take backup of EMI..are both different????
After rooting and installing cwm recovery if we factory reset in settings or in recovery mode ( wipe data) then d fone will operate or will get stuck in boot loop?????pls reply
Click to expand...
Click to collapse
Dont factory reset when u r using cwm.
Sent from my GT-I8552 using Tapatalk
jassudani3 said:
Thanks for the help buddy!!!
Click to expand...
Click to collapse
U r wc dude..
Sent from my GT-I8552 using Tapatalk
jassudani3 said:
And 1 more thing,,,,,,,,,,,,
I have now rooted nd installed cwm......
But i am not able to install launcher 4.4
the 3 files........i am not able to install prevuiltgmscore.apk and velvet.apk.....i think they replace internal apps
pls tell me an app to replace internal apps and also how to install this.....
PLS.!!
Click to expand...
Click to collapse
Use root uninstaller to uninstall system apps. Becareful its risky.
Sent from my GT-I8552 using Tapatalk
jassudani3 said:
Bro,,,,,,,
root uninstaller is only for removing phone apps
i want install velvet(g. search) and g. play serives
pls tell me the procedure to install android 4.4 with those 3 files, coz i am not able to install these 2 files....
pls!
Click to expand...
Click to collapse
Sorry I havent tried those yet so I dont know how can it be installed. Check faq from where u have downloaded those.
Sent from my GT-I8552 using Tapatalk

Categories

Resources