Hello,
can anybody explain, how the Motorola Basic Dock works?
or better, how the atrix signalises, that the table dock is attached?
i know, samsung works with resistors, but what do moto?
i looked in the standard dock and get shocked
i only wanne remove the most. only usb out should work, and this for loading and data transfer AND i wanne get message for table dock, is this possible?
bump
has nobody any idea?
Related
Anyone figured a way to use the gtab with a projector without the dock? trying to have as few gizmos as possible to take on the road with me.
If you want HDMI output without the dock you would need a custom cable from the g-tablet's docking port to HDMI and as far as I know, no such cable exists at this time. You can search these forums for "HDMI cable" and find a couple of threads on the subject.
I understand the desire to travel light but the dock really isn't that big or heavy.
999ping said:
If you want HDMI output without the dock you would need a custom cable from the g-tablet's docking port to HDMI and as far as I know, no such cable exists at this time. You can search these forums for "HDMI cable" and find a couple of threads on the subject.
I understand the desire to travel light but the dock really isn't that big or heavy.
Click to expand...
Click to collapse
Well my dock isn't exactly light but it is required to provide power to the HDMi output. I did purchase a HDMI to DVI converter for my projector and it works like a champ projecting from the gtab to the projector. Now if my mouse would work I could (almost) ditch the laptop. I have also found that most of the PowerPoint viewers don't 100% convert my PowerPoint slide decks to view on the gtab. It is typically some pictures on the slides that don't convert. I have roughly 16 slides out of 125 slides that don't project properly (can't remember off hand which program does the best job, but that is my best effort). I haven't had time to convert all of those slides although I had to teach one of my training classes today so had to lug the laptop along. Ideally a mouse or wireless remote to advance the slides would create a smaller travel kit. Good luck with the presentation. The dock while heavy, weighs as much as my Dell power brick so that at least is a trade off.
Hey guys...
this is a big question for me also...but I'm wondering if anyone has figured out a way to do video OUT of the USB port for powerpoint? Since most PPT is just static there shouldn't be a huge issue with BW (Even so, I've got a USB to VGA adapter for my laptop, so USB definently has the BW to pull it off. )
wonder if there's a simple USB to VGA adapter out there somewhere. I'll do some digging....
it's not that the docking station is heavy or anything, it's just bulky in a briefcase. I travel international all the time and want to leave as much crap at home.
Oh, and if anyone comes up with a good ppt editor / viewer lemme know.
BN
bnovak said:
Hey guys...
this is a big question for me also...but I'm wondering if anyone has figured out a way to do video OUT of the USB port for powerpoint? Since most PPT is just static there shouldn't be a huge issue with BW (Even so, I've got a USB to VGA adapter for my laptop, so USB definently has the BW to pull it off. )
wonder if there's a simple USB to VGA adapter out there somewhere. I'll do some digging....
it's not that the docking station is heavy or anything, it's just bulky in a briefcase. I travel international all the time and want to leave as much crap at home.
Oh, and if anyone comes up with a good ppt editor / viewer lemme know.
BN
Click to expand...
Click to collapse
Funny you asked about a USB to VGA adapter. I'm not sure if its video out or in??? The description says you can use it for dual monitor expandability which leads me to believe its a video in cable. Anyways, someone posted a couple days ago at another forum that he found that adapter. Its expensive though. Here's the link he posted...
http://www.fommy.com/view-full-page...nic+gTablet&tabletcategory=Cables&skuno=90129
That one is pricey
There are lots of those USB to VGA adapter gizmos.. but I have hesitated to buy one because I wasn't sure there was the right software available.. presumably you need at least a generic USB screen driver..
Anyone tried one of these with the gtab?
http://www.google.com/search?q=usb+...06&bav=on.2,or.r_gc.r_pw.&fp=a40f3cd63ecc4954
Your best bet would be to use a DisplayLink based adapter. These allow dvi or vga based displays to be connected via usb. They have also released linux drivers. It even seems as though they were able ouput video to such displays through an app called "Send to Framebuffer". I actually have a displaylink dock, so maybe I'll play around with it after class today. Check out the following link and scroll down to "External Displays".
http://sven.killig.de/android/N1/2.2/usb_host/
xmr405o said:
Funny you asked about a USB to VGA adapter. I'm not sure if its video out or in??? The description says you can use it for dual monitor expandability which leads me to believe its a video in cable. Anyways, someone posted a couple days ago at another forum that he found that adapter. Its expensive though. Here's the link he posted...
Click to expand...
Click to collapse
I actually have some emails into Fommy and the mfg. of the device. Although on the Fommy site it list the G-Tablet and NI Adam, I have yet to find any information from the mfg that this device will work with Android.
It is a video out device.
Edit - Fixed the problem, sorry for the question
So I just made the switch from the Epic to the Photon. And please feel free to call me a dumb-a$$, but I am trying to connect the HD dock to my monitor. So here's the thing, I only have 1 HDMI port on the monitor, and I have this dock and my laptop to connect. I thought I could connect the laptop via VGA and the dock via HDMI, but the only way the dock shows up on the monitor is if I shut down the PC. Is there any way, to get this into a "split" screen type of thing (my guess is no), could I do it if I had a HDMI splitter (would that work?)
Sorry for being a noob...please don't hate on me...
libracolo said:
Edit - Fixed the problem, sorry for the question
So I just made the switch from the Epic to the Photon. And please feel free to call me a dumb-a$$, but I am trying to connect the HD dock to my monitor. So here's the thing, I only have 1 HDMI port on the monitor, and I have this dock and my laptop to connect. I thought I could connect the laptop via VGA and the dock via HDMI, but the only way the dock shows up on the monitor is if I shut down the PC. Is there any way, to get this into a "split" screen type of thing (my guess is no), could I do it if I had a HDMI splitter (would that work?)
Sorry for being a noob...please don't hate on me...
Click to expand...
Click to collapse
It helps a LOT if you tell us how you fixed it. You'd be surprised how many people might want to know this same thing.
ScandaLeX said:
It helps a LOT if you tell us how you fixed it. You'd be surprised how many people might want to know this same thing.
Click to expand...
Click to collapse
I think I was bit "overwhelmed" when I first got the phone home (there were so many fun things to play with) that my sense of logic must have gone out the window (I figured everyone was laughing at me for even posting the question). But to answer your question, the problem is that my monitor doesn't have "PIP" (pic in pic) so no real way to get both the Photon and laptop to display at the same time. But, I can use the laptop display for email, web, (laptop stuff) and the monitor for the Photon doc. What I did was I bought a HDMI splitter (it allows for 3 HD devices), then I set the monitor (in Windows) to display on both monitors separately (my stupid calibration tool was not real easy to allow this, but I finally got it to show the monitors as separate items instead of dupes). Then I just switch to the dock (on the HDMI switch), open up the laptop screen, and voila, photon on the monitor, laptop on the laptop monitor (sort of like a dual monitor). It only works when I switch to the photon dock setting (on the switch). FYI, the switch was like $15, and I spent an extra $5 and got a small, portable keyboard (and mouse) and hooked it into the dock.
Really two questions:
1. Is there a way to adjust resolution or over/underscan on the HDMI output of the tablet? When I have the tablet connected to my TV, there is about 1-2" of black border around the mirrored image.
2. I am trying to output to a LCD Monitor, mHDMI>HDMI adapter to HDMI>DVI cable connected to my Monitor, but the Monitor does display any image - not even a "out of display range" error. The monitor will briefly turn on, then dispaly "no signal." Both adapter and cable work independently of each other when attached to my TV. Is this a problem with the tablet, cable configuration, or my monitor?
Is there anything I can do to check/adjust the signal out from the Tablet? I am using the OG Samsung Dock w/HDMI out. Please let me know if I can provide any additional information.
[Edit] Currently running Tasks 14 Full Rom with Pershoot's latest kernel. And I have the WiFi only version.
same issue
I have a samsung galaxy 10.1 tab in the office and I am trying to do HDMI mirroring. I do not have a dock but I have HDTV Adapter. I do not have a HDMI monitor at office. So, I used a HDMI to DVI converter. When connected, nothing happens. no errors on the monitor just like you said.
So, does it require a TV/Monitor which has a HDMI input?
Or does it simply require a media dock?
[Edit] Does HDMI mirroring requires rooting?
Any help is appreciated.
Thanks
I would assume HDMI mirroring is built-in, as they sell addons for HDMI output. Semi glad to see someone else has the problem... but now its two of us with the same problem lol. Later this week I'm going to try an ICS build, see if there is any difference.
Sent from my SAMSUNG-SGH-I717 using XDA App
Well, I was glad I was not the only one with this problem
I did some Googling, search Android HDMI to VGA. Should turn up some links exposing the issue. Basically, android cannot natively do VGA. Need a HDMI to VGA converter, possibly powered, but there isn't much information. Dealextreme sells one for $38... and it may not work.
Sucks, seems like a decades old standard would be something engineers would think to maintain compatibility with.
Sent from my SAMSUNG-SGH-I717 using XDA App
give up
At this point of time, I am giving up and tell my boss to buy a new tablet. This is my office one.
I have Coby Kyros - bought it for cheapness. Will try rooting that.
mHDMI Connected to HDMI>DVI Cable = No Output on Monitor?
I have exactly the same problem with my XOOM and my Samsung T220 DVI-D monitor
I note that noboby has actually answered the questions posed by the previous posters.
Is that because no one knows??
The HDMI and the DVI-D signals are both fully digital and according to info I read on the web are pretty compatible.
I have aslo seen implied that a 5V signal which the DVI-D requires is maybe not available on the HDMI output.
How about some of you clever tech guys on the forums letting us less well gifted folks know if this is really a no-no and maybe why this is the case.
Thanks in advance for your help
Sorry folks have posted this in the wrong place ooops
I'd really like a dock to keep my wires neat for my home theater however all the docks I've found for the note only have the micro USB port. Does anyone know of an HDMI dock for the note or if the HDMI adapter can be plugged into the port on the standard dock to provide video pass-through ?
Thanks guys!
Mugen is making a dock with HDMI out. Should work for the ATT Note.
http://www.mugen-power-batteries.co...9220-usb-desktop-cradle-with-hdmi-output.html
Hey Thanks!
Thats the first I've seen with built in HDMI. Seems like a logical feature for any dock made for a device with video out. This will make for a great media center feature.
I will be also purchasing the standard AT&T dock and attempt to connect my Samsung HDMI adapter to the back of it to see if it can handle pass-through. I'll report back here if it works for anyone else curious.
Hello all,
I wonder if anyone can tell me how I know if my phone is in a dock mode? I've just bought a desktop dock from MobileFun, and while it charges it, and I'm able to access the phone for file transfer, I don't think its in dock mode. I've got Profile Scheduler, and it doesn't seem to detect when I put the phone into the dock.
Am I overlooking something obvious here?
Thanks.
If you put the phone into the dock, it shows a special "desktop page", basically a lot of empty screen with a clock in the middle.and some small shortcut icons and buttons in the top.
(cant make a screenshot ATM, my dock is at home and I am not )
HellcatDroid said:
If you put the phone into the dock, it shows a special "desktop page", basically a lot of empty screen with a clock in the middle.and some small shortcut icons and buttons in the top.
(cant make a screenshot ATM, my dock is at home and I am not )
Click to expand...
Click to collapse
Thanks. So the dock I've got seems only to be charging it, and not docking it. Any ideas about the difference? How does the phone know its being docked / charged?
Sorry to bump - promise I'll only do it once.
I'm just wondering whether the desktop dock is faulty, or whether I'm not doing something right.
How does a S3 know the difference between a dock and just simply charging, which is what my dock seems to be doing.
Thanks.
I think the phone knows about being in the dock the same way it knows about an OTG being connected, AC being plugged, the JIG being inserted and all these things, by a certain resistor value between the usually unused 5th and the VCC (IIRC) PIN of the USB port.
Or in other words there's a resistor of a special "value" between two PINs of the USB connector, and via that the phone knows what's going on down there.
The original Sammy dock doesn't (to my disappointment) do much more than just charging and allowing for connecting external speakers.
It doesn't even pass the USB through, so connecting the dock to the PC and putting the phone into the dock will NOT give USB connection
Ohwell....