I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
push
dylan.mfh said:
I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
Click to expand...
Click to collapse
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
McJesus15 said:
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
Click to expand...
Click to collapse
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Ah my bad. Saw the Androidroot number thing and assumed it was the nvflash boot loader.
Sent from my Transformer Prime TF201 using xda app-developers app
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Sent from my Samsung Chromebook.
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan.
Click to expand...
Click to collapse
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
flumpster said:
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
Click to expand...
Click to collapse
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
dylan.mfh said:
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
Click to expand...
Click to collapse
It's ok thanks mate, I have loads of beer
Enjoy your prime
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
Sent from my Samsung Chromebook.
Click to expand...
Click to collapse
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
eyecubed said:
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
Click to expand...
Click to collapse
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
whycali said:
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
Click to expand...
Click to collapse
Fixed him over pm about 6 hours ago mate lol
flumpster said:
Fixed him over pm about 6 hours ago mate lol
Click to expand...
Click to collapse
um, updates are nice
Related
hi everyone
at first i was having a bootloop with my NT
while trying to solve it. i formatted the recovery and boot (a noob mistake) through fastboot
now when i turn NT on, it stuck on the silver n screen
could you please help me fix it
My NT is 16GB, CM9 alpha 3
Thanks in advance
Check this vid by raywaldo (props), hope it helps; http://www.youtube.com/watch?v=ZIrgkjen8ro&feature=related, to bring you back to a stock NT.
coolzat said:
hi everyone
at first i was having a bootloop with my NT
while trying to solve it. i formatted the recovery and boot (a noob mistake) through fastboot
now when i turn NT on, it stuck on the silver n screen
could you please help me fix it
My NT is 16GB, CM9 alpha 3
Thanks in advance
Click to expand...
Click to collapse
Maybe try to flash a new boot.img through fastboot. I'm not sure, I think @succulent has the boot image.
Solar.Plexus said:
Maybe try to flash a new boot.img through fastboot. I'm not sure, I think @succulent has the boot image.
Click to expand...
Click to collapse
This. You wiped your recovery and boot, destroying the images. You need to rectify that.
Sent from my MB855 using Tapatalk
SD card
coolzat said:
hi everyone
at first i was having a bootloop with my NT
while trying to solve it. i formatted the recovery and boot (a noob mistake) through fastboot
now when i turn NT on, it stuck on the silver n screen
could you please help me fix it
My NT is 16GB, CM9 alpha 3
Thanks in advance
Click to expand...
Click to collapse
Well, I'd start with a bootable SD card and attempt to reflash CWM to emmc. Then once you get back into CWM I would go ahead and reflash CM7/9. Take care to use the appropriate image applicable to you NT (8/16).
If you search through the forums you'll find what you need. I'll check back later and see if I can find link for you, but I'm kinda swamped right now.
---------- Post added at 07:13 PM ---------- Previous post was at 06:33 PM ----------
coolzat said:
hi everyone
My NT is 16GB, CM9 alpha 3
Thanks in advance
Click to expand...
Click to collapse
The initial bootloop was cause by an 'expired' CM9. The alpha releases come with a 30 day expirate "date" to prevent people from selling the alpha release ROMs to inexperience persons. Once you get CWM back on it download and install Alpha .04.
i can't thank you enough LMN8R
your method worked perfectly
and i thank you all guys for suggestions
i tried to do them before but it didn't work
any bootable SD wouldn't boot
and always got stuck in the n screen
coolzat said:
i can't thank you enough LMN8R
your method worked perfectly
I'm am glad it worked out for you; but it is not my method, just passin' on info I happened to come accross. raywaldo http://forum.xda-developers.com/member.php?u=531723 posted the vid on YouTube - thank him; and THANK the DEVS who make it all possible.
Click to expand...
Click to collapse
Okay so I received an Asus Transformer Prime tf201 yesterday. This morning I was able to unlock it, root it, and then I wanted to install the latest nightly of CM10 (24th). After I saw that it was indeed rooted I booted into twrp and in Wipe I did Factory Reset, System, Internal Storage (wanted to get rid of the pictures, etc. from previous owner). I had CM10 latest nightly and gapps both on my External SD Card so I knew I wasn't removing those.
Anyway after clicking on Install and then Using external SD I selected the zip of CM10 and swiped to confirm flash. It does well for about 2 or 3 minutes (the blue bar even shows progress) and then it comes up with the message E:Unable to mount '/staging'.
Please please tell me I did not mess up my Prime when I just got it???!!! Anyone that can help please help as soon as possible as I am really wanting to play with this after all the fantastic reviews I have heard. You would have my eternal gratitude and if it is not wrong to do this I will even donate via PayPal to the person that can help me "fix" my Prime.
Please KNOW I have been looking for answers to this for HOURS today and still haven't found anything to help me. I am really hoping some genius on XDA can help me.
alias4ever said:
Okay so I received an Asus Transformer Prime tf201 yesterday. This morning I was able to unlock it, root it, and then I wanted to install the latest nightly of CM10 (24th). After I saw that it was indeed rooted I booted into twrp and in Wipe I did Factory Reset, System, Internal Storage (wanted to get rid of the pictures, etc. from previous owner). I had CM10 latest nightly and gapps both on my External SD Card so I knew I wasn't removing those.
Anyway after clicking on Install and then Using external SD I selected the zip of CM10 and swiped to confirm flash. It does well for about 2 or 3 minutes (the blue bar even shows progress) and then it comes up with the message E:Unable to mount '/staging'.
Please please tell me I did not mess up my Prime when I just got it???!!! Anyone that can help please help as soon as possible as I am really wanting to play with this after all the fantastic reviews I have heard. You would have my eternal gratitude and if it is not wrong to do this I will even donate via PayPal to the person that can help me "fix" my Prime.
Please KNOW I have been looking for answers to this for HOURS today and still haven't found anything to help me. I am really hoping some genius on XDA can help me.
Click to expand...
Click to collapse
Did you check in twrp under the mounts button? I don't have my prime with me atm but I know there is a mounts section either on the first screen or under advanced may be....
Gage_Hero said:
Did you check in twrp under the mounts button? I don't have my prime with me atm but I know there is a mounts section either on the first screen or under advanced may be....
Click to expand...
Click to collapse
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
alias4ever said:
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
Click to expand...
Click to collapse
Mine, the radio button for external is on, you could try the terminal under advanced button...command would be something like su then enter and then mount /staging or something like that.... you may want to check the command exactly, my terminal skills are limited...
alias4ever said:
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
Click to expand...
Click to collapse
Probably running TRWP 2.3.x.x, right? Some others had this same problem with the TF300 and switched back to TWRP 2.2.2.1 and their ROM flashed just fine. Might be worth a shot.
tedr108 said:
Probably running TRWP 2.3.x.x, right? Some others had this same problem with the TF300 and switched back to TWRP 2.2.2.1 and their ROM flashed just fine. Might be worth a shot.
Click to expand...
Click to collapse
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Gage_Hero said:
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Click to expand...
Click to collapse
No, there is a 2.3 for both ics and jb bootloaders ... I THINK that 2.2 was ics only (can't remember for sure). If he was loading the CM10 nightly, he should have had an ics bootloader, or it would not have run.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
Gage_Hero said:
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Click to expand...
Click to collapse
You do bring up a good point, though ... if his TFP had a JB OTA, he could have the jb bootloader! Alias, you need to check these types of things out before moving forward.
tedr108 said:
No, there is a 2.3 for both ics and jb bootloaders ... I THINK that 2.2 was ics only (can't remember for sure). If he was loading the CM10 nightly, he should have had an ics bootloader, or it would not have run.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
You do bring up a good point, though ... if his TFP had a JB OTA, he could have the jb bootloader! Alias, you need to check these types of things out before moving forward.
Click to expand...
Click to collapse
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
alias4ever said:
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
Click to expand...
Click to collapse
If you had the JB bootloader before, then you surely still have it. You would not change your bootloader by flashing a CM10 nightly ROM. The only way that I know of for you to go back to an ICS bootloader is with nvflash. If nvflash was not on your TFP when you got it, you won't be getting it anytime soon, because it cannot be installed with a JB bootloader on your TFP.
Which TWRP 2.3.1 did you load? The JB version?
The CM10 nightlies are not currently compatible with a JB bootloader, so you had no hope of running it. That may very well have caused your staging error, but I am not sure. Since you apparently have a JB bootloader, you would have to flash an appropriate ROM, like Craig Gomez' (here). But, only the JB version of TWRP 2.3.1 will work for you, as far as I know. So, I'm thinking you must have loaded the correct one.
I cannot be 100% sure that you have the JB bootloader. I hope you are sure that your TFP was updated to JB by an Asus update (OTA).
If I were you, I'd make a plan of action and post it here. Be patient and wait for a response, before moving forward. Good luck with this.
alias4ever said:
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
Click to expand...
Click to collapse
the only way back to an ics bootloader it through nvflash... if you didn't do nvflash before you started with JB then you are stuck using jb roms only I think.....you could try hairy bean .....
tedr108 said:
If you had the JB bootloader before, then you surely still have it. You would not change your bootloader by flashing a CM10 nightly ROM. The only way that I know of for you to go back to an ICS bootloader is with nvflash. If nvflash was not on your TFP when you got it, you won't be getting it anytime soon, because it cannot be installed with a JB bootloader on your TFP.
Which TWRP 2.3.1 did you load? The JB version?
The CM10 nightlies are not currently compatible with a JB bootloader, so you had no hope of running it. That may very well have caused your staging error, but I am not sure. Since you apparently have a JB bootloader, you would have to flash an appropriate ROM, like Craig Gomez' (here). But, only the JB version of TWRP 2.3.1 will work for you, as far as I know. So, I'm thinking you must have loaded the correct one.
I cannot be 100% sure that you have the JB bootloader. I hope you are sure that your TFP was updated to JB by an Asus update (OTA).
If I were you, I'd make a plan of action and post it here. Be patient and wait for a response, before moving forward. Good luck with this.
Click to expand...
Click to collapse
Okay let's see if I can get this is all right. I have The JB version of TWRP 2.3.1. As for running a different ROM I tried the Unofficial one you listed and it still gives me the Unable to mount 'staging/' error. It first says it is verifying the signature then update package, then it says Updating partition details and that is when it comes to the staging error. :crying:
I am 110% positive that my TFP was updated to JB by the Asus update (OTA). Thanks again for the suggestions hopefully someone out there will suggest something.
What about doing the PRIME FULL WIPE that someone suggests here: http://forum.xda-developers.com/showthread.php?t=1670824 Then trying to install the Unofficial CM10 with the JB Bootloader? Anyone know if this would work?
alias4ever said:
Okay let's see if I can get this is all right. I have The JB version of TWRP 2.3.1. As for running a different ROM I tried the Unofficial one you listed and it still gives me the Unable to mount 'staging/' error. It first says it is verifying the signature then update package, then it says Updating partition details and that is when it comes to the staging error. :crying:
I am 110% positive that my TFP was updated to JB by the Asus update (OTA). Thanks again for the suggestions hopefully someone out there will suggest something.
What about doing the PRIME FULL WIPE that someone suggests here: http://forum.xda-developers.com/showthread.php?t=1670824 Anyone know if this would work?
Click to expand...
Click to collapse
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Read this thread... this guy was in the same boat... page 2 post 19 is where he fixed it....
http://forum.xda-developers.com/showthread.php?t=1942927&highlight=unable+to+mount+staging&page=2
@Alias -- I was really hoping the JB bootloader ROMs would do it for you.
This right here is excellent advice from Gage_Hero:
Gage_Hero said:
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Click to expand...
Click to collapse
If this does not work, I am at a loss of how to recreate the Staging partition (and perhaps others), but there is probably a way.
Gage_Hero said:
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Read this thread... this guy was in the same boat... page 2 post 19 is where he fixed it....
http://forum.xda-developers.com/showthread.php?t=1942927&highlight=unable+to+mount+staging&page=2
Click to expand...
Click to collapse
You are an ABSOLUTE GENIUS! I remember reading that post of the guy in the same boat and honestly did not think it would work for me because I kept trying to install the different ROM's but it WORKED! Thank you, thank you, THANK YOU to you and everyone else for their suggestions! @Gage, can I send you a little thank you on PayPal??? Thank you so MUCH AGAIN! I can't thank you enough...
Now do I dare flash the CM10 Unofficial with the JB Boatloader through GooManager??? :silly:
alias4ever said:
You are an ABSOLUTE GENIUS! I remember reading that post of the guy in the same boat and honestly did not think it would work for me because I kept trying to install the different ROM's but it WORKED! Thank you, thank you, THANK YOU to you and everyone else for their suggestions! @Gage, can I send you a little thank you on PayPal??? Thank you so MUCH AGAIN! I can't thank you enough...
Now do I dare flash the CM10 Unofficial with the JB Boatloader through GooManager??? :silly:
Click to expand...
Click to collapse
Glad to get you up and running again just do yourself a favor before you try cm10.... make a backup... or 2 I never used cm on my tab but did it on my phone.... when I restored... I had to do it twice... not sure if that is the case with the prime or not ... but if it is a JB bootloader then you should be okay... I like flashing through twrp though .. never did a rom through goo... but I am sure it works...
I need a little more help now. I went to boot into TWRP last night and I just got the dead Andy. Does that mean that putting this stock JB back on my TFP I have lost my TWRP recovery?
My TFP is rooted though as I have SU in my app drawer and I installed Titanium Backup just fine. I just wanted to make a couple of backups of my TFP (one to save on my PC and one to save on my TFP's External SD. So my question is can I reinstall my TWRP through Fastboot like I did before even with it rooted? First time I did it I followed these instructions:
http://www.youtube.com/watch?v=-pW05Jf87dg&feature=plcp
But upon further reading it states that people have had problems installing JB ROMs with using the 2.3 or 2.3.1 version so should I install the 2.2 version? Please someone help me yet again possibly??? THANKS!
alias4ever said:
I need a little more help now. I went to boot into TWRP last night and I just got the dead Andy. Does that mean that putting this stock JB back on my TFP I have lost my TWRP recovery?
My TFP is rooted though as I have SU in my app drawer and I installed Titanium Backup just fine. I just wanted to make a couple of backups of my TFP (one to save on my PC and one to save on my TFP's External SD. So my question is can I reinstall my TWRP through Fastboot like I did before even with it rooted? First time I did it I followed these instructions:
http://www.youtube.com/watch?v=-pW05Jf87dg&feature=plcp
But upon further reading it states that people have had problems installing JB ROMs with using the 2.3 or 2.3.1 version so should I install the 2.2 version? Please someone help me yet again possibly??? THANKS!
Click to expand...
Click to collapse
I think people have had issues installing 2.2 on the JB bootloader I would fastboot install 2.3.1 there is no reason it shouldn't work..... I think there is some disconnect between twrp and some of the jb roms as some devs are including twrp in their install like Mr.Wookie over at team wookie.....
Gage_Hero said:
I think people have had issues installing 2.2 on the JB bootloader I would fastboot install 2.3.1 there is no reason it shouldn't work..... I think there is some disconnect between twrp and some of the jb roms as some devs are including twrp in their install like Mr.Wookie over at team wookie.....
Click to expand...
Click to collapse
Okay so I went ahead and have redone TWRP 2.3.1 via Fastboot. I then did a backup of my ROM twice onto my External SD card. After that I did a a Factory Reset through TWRP of course and then installed the Unofficial CM10 with JB Bootloader. I still got the E:can not mount '/staging' but I went ahead and installed the Gapps that was listed on the thread as well and then wiped davlik cache and regular cache. Rebooted and I am VERY HAPPY to say it FINALLY worked this time!
I was ecstatic to see that CyanogenMod symbol come up. I made sure to wait 10 minutes to let the ROM settle before doing anything and it looks very nice!
I am confused as to why it worked the second time or even worked with the staging error as well when it didn't last time. Maybe because I didn't do the wipe Internal in TWRP? Who knows all I know is my Asus is working wonderfully and I am SO HAPPY to have it back! Thank you again everyone for all your help, I LOVE THIS FORUM! :laugh: :good:
alias4ever said:
Okay so I went ahead and have redone TWRP 2.3.1 via Fastboot. I then did a backup of my ROM twice onto my External SD card. After that I did a a Factory Reset through TWRP of course and then installed the Unofficial CM10 with JB Bootloader. I still got the E:can not mount '/staging' but I went ahead and installed the Gapps that was listed on the thread as well and then wiped davlik cache and regular cache. Rebooted and I am VERY HAPPY to say it FINALLY worked this time!
I was ecstatic to see that CyanogenMod symbol come up. I made sure to wait 10 minutes to let the ROM settle before doing anything and it looks very nice!
I am confused as to why it worked the second time or even worked with the staging error as well when it didn't last time. Maybe because I didn't do the wipe Internal in TWRP? Who knows all I know is my Asus is working wonderfully and I am SO HAPPY to have it back! Thank you again everyone for all your help, I LOVE THIS FORUM! :laugh: :good:
Click to expand...
Click to collapse
Good to hear.... not sure if your aware or not but with a decent backup ( I do one everytime I think I am going to try something foolish) even if you do a wipe, as long as you can reach twrp you can restore the prime to it's state before you started messing with it....
So I was flashing a new rom in CWM on my AT&T Atrix 4G, unlocked bootloader, running CM10. I was going to flash CM9 because there was a bug in CM10, and when I went to wipe my dalvik cache, I hit the wrong menu option somehow and wiped an internal partition that must've been the one that CWM was on, so now I get the screen shown in the picture. Any ideas guys? Thx.
Njl6705 said:
So I was flashing a new rom in CWM on my AT&T Atrix 4G, unlocked bootloader, running CM10. I was going to flash CM9 because there was a bug in CM10, and when I went to wipe my dalvik cache, I hit the wrong menu option somehow and wiped an internal partition that must've been the one that CWM was on, so now I get the screen shown in the picture. Any ideas guys? Thx.
Click to expand...
Click to collapse
what happens if you select #9 android recovery?
barry_ said:
what happens if you select #9 android recovery?
Click to expand...
Click to collapse
I should have mentioned, that doesn't work. I get the error in the following picture.
Please help me! I forgot how awful using a feature phone is! lol
are you familiar with fastboot? What happens if you select fastboot? I am just thinking that you might try reflashing the recovery (fastboot flash recovery recovery.img) but I am not great with fastboot but worth a look?
---------- Post added at 01:36 AM ---------- Previous post was at 01:33 AM ----------
saw this http://www.youtube.com/watch?v=1vHaDlRFocU might be of some help?
barry_ said:
are you familiar with fastboot? What happens if you select fastboot? I am just thinking that you might try reflashing the recovery (fastboot flash recovery recovery.img) but I am not great with fastboot but worth a look?
---------- Post added at 01:36 AM ---------- Previous post was at 01:33 AM ----------
saw this http://www.youtube.com/watch?v=1vHaDlRFocU might be of some help?
Click to expand...
Click to collapse
I'll give it a try. Thanks man! I was looking at SBF files, which I really wanted to avoid. I'll let you know what happens.
Nothing. The fastboot command line tool couldn't see my phone. I'm going to look for another guide. Maybe there's something I'm missing.
this? http://modmymobile.com/forums/661-motorola-atrix-4g-development/560719-how-recover-soft-brick.html
barry_ said:
this? http://modmymobile.com/forums/661-motorola-atrix-4g-development/560719-how-recover-soft-brick.html
Click to expand...
Click to collapse
Driver issues. When I click yes to the error on the first button, the error in the second screenshot pops up.
By the way, I just want to say I appreciate the help and the quick replies.
Found the drivers and successfully flashed RomRacers Recovery through Fastboot! Thanks guys! She lives!:victory:
It's odd though, I just flashed cm10 and I'm having frequent random reboots and the screen calibration is off.
It looks like the trick here is a pds partition fix. I'll give it a try tomorrow and report back.
The pds partition worked.
Njl6705 said:
Driver issues. When I click yes to the error on the first button, the error in the second screenshot pops up.
Click to expand...
Click to collapse
Njl6705 said:
By the way, I just want to say I appreciate the help and the quick replies.
Click to expand...
Click to collapse
Njl6705 said:
Found the drivers and successfully flashed RomRacers Recovery through Fastboot! Thanks guys! She lives!:victory:
Click to expand...
Click to collapse
Njl6705 said:
It's odd though, I just flashed cm10 and I'm having frequent random reboots and the screen calibration is off.
Click to expand...
Click to collapse
Njl6705 said:
It looks like the trick here is a pds partition fix. I'll give it a try tomorrow and report back.
Click to expand...
Click to collapse
Heard about edit function?
eagleeyetom said:
Heard about edit function?
Click to expand...
Click to collapse
No, I haven't. Care to elaborate?
It means posting 5 posts one after the other instead of simply editing the first one is frowned upon.
ravilov said:
It means posting 5 posts one after the other instead of simply editing the first one is frowned upon.
Click to expand...
Click to collapse
Oh. Haha that edit function. I thought he was talking about something in android. N00b here. Sorry.
Njl6705 said:
Found the drivers and successfully flashed RomRacers Recovery through Fastboot! Thanks guys! She lives!:victory:
Click to expand...
Click to collapse
good to see you got there in the end :good:
a little help
Njl6705 said:
Found the drivers and successfully flashed RomRacers Recovery through Fastboot! Thanks guys! She lives!:victory:
Click to expand...
Click to collapse
I am a RAZR user and have it all rooted and running great so I am fairly competent but a co-worker has the ATRIX and it was in a bootloop. I offered to help and find myself practically where you were except I have no OS on the phone and can not seem to get recovery on it.
Can you share where you found the right drivers, recovery, and a good OS? Basically I need someone to hold my hand through this because I do not have the time to keep looking for the right things since I have a kitchen remodel underway and a wife who....need I say more?
Thanks
can't recover from this
Njl6705 said:
So I was flashing a new rom in CWM on my AT&T Atrix 4G, unlocked bootloader, running CM10. I was going to flash CM9 because there was a bug in CM10, and when I went to wipe my dalvik cache, I hit the wrong menu option somehow and wiped an internal partition that must've been the one that CWM was on, so now I get the screen shown in the picture. Any ideas guys? Thx.
Click to expand...
Click to collapse
I got exactly what you did. But even in fastboot mode I can't get out of this screen after flashing the recovery. Actually it does not get into CWM or another recovery but each time I Vol and Power Down it gets into this screen again. Looks like flashing does not help at all. If I select Boot Android it powers up in the last ROM I flashed before all this. The problem is that I cannot operate any soft button at the bottom: the screen looks not calibrated so I need to push on areas lower than actual buttons are, and I don't know how to get out of that either. No Back, neither Home or Search buttons are unreachable.
What can I do? How to reflash this phone?
If you activate the RSD mode you can flash your stock rom with RSDLite. There is a superthread with the original firmwares, you will lose root and unlock but it will restore completely your device
Hey people.
I rooted my ANDROID HTC ONE from T mobile, using a guide I found on here and the all in one toolkit.
I am using TWRP newest 2.5.0.0, I can access the bootloader and recovery, and have been sat here now looking for answers for about 5 hours.
It freezes on the HTC quietly brilliant screen.
Also says that there is no OS installed.
I am looking for help via TEAMVIEWER, or someway to get my phone working.
If you need more information please let me now ASAP so I can give it you.
UPDATE: Okay people I successfully installed the XenonHD ROM and it is now stuck in bootloop i have tried clearing the cache and it doesn't do anything, this is the only ROM that is currently working.
I have searched the net searched the post and still nothing.
I am almost got my phone back guys and am willing to DONATE or repay the favour via modding something through XBOX or whatever I can.
Please contact me soon as possible.
I am still on TEAMVIEWER.
Changed my recovery to ClockWorkMod Touch.
Still need help?
Sent from my HTC One using Tapatalk 4 Beta
osmosizzz said:
Still need help?
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah mate, really bad.
Can you offer any help please.
ScouseCarl said:
Hey people.
I rooted my ANDROID HTC ONE from T mobile, using a guide I found on here and the all in one toolkit.
I am using TWRP newest 2.5.0.0, I can access the bootloader and recovery, and have been sat here now looking for answers for about 5 hours.
It freezes on the HTC quietly brilliant screen.
Also says that there is no OS installed.
I am looking for help via TEAMVIEWER, or someway to get my phone working.
If you need more information please let me now ASAP so I can give it you.
Click to expand...
Click to collapse
There have been a lot of posts on similar issues. You can "sideload" a ROM via ADB commands from your computer. If you can get into recovery, your phone can be fixed. I haven't done this myself (still stock), but do a search on google or xda on sideloading a ROM from ADB.
stevedebi said:
There have been a lot of posts on similar issues. You can "sideload" a ROM via ADB commands from your computer. If you can get into recovery, your phone can be fixed. I haven't done this myself (still stock), but do a search on google or xda on sideloading a ROM from ADB.
Click to expand...
Click to collapse
Already tried sideloading, said it was complete successfully on the phone and on the computer, never worked still says no OS installed.
ScouseCarl said:
Already tried sideloading, said it was complete successfully on the phone and on the computer, never worked still says no OS installed.
Click to expand...
Click to collapse
Did you clear the cache? Also, I've seen some people have to format the partitions.
EDIT: But formatting does not seem to be needed if you sideloaded successfully.
stevedebi said:
Did you clear the cache? Also, I've seen some people have to format the partitions.
EDIT: But formatting does not seem to be needed if you sideloaded successfully.
Click to expand...
Click to collapse
Tried all that, Any chance you could try helping VIA teamviewer, you now more about it than me I think i could of done it in wrong order or use a bad ROM or KERNAL..
Teamviewer Info:
ID: 928 366 143
PASS: 8119
Im on now just looking for anyone to help. I will have a notepad up so when you access my laptop just let me now your from here.
ScouseCarl said:
Tried all that, Any chance you could try helping VIA teamviewer, you now more about it than me I think i could of done it in wrong order or use a bad ROM or KERNAL..
Teamviewer Info:
ID: 928 366 143
PASS: 8119
Im on now just looking for anyone to help. I will have a notepad up so when you access my laptop just let me now your from here.
Click to expand...
Click to collapse
Sorry, I've not even rooted my phone, and I would not want to use your device as a learning tool. Let me look around and see if I can find a nandroid backup.
EDIT: Nope, I don't see one. Try opening a thread requesting a nandroid back for your recovery.
stevedebi said:
Sorry, I've not even rooted my phone, and I would not want to use your device as a learning tool. Let me look around and see if I can find a nandroid backup.
EDIT: Nope, I don't see one. Try opening a thread requesting a nandroid back for your recovery.
Click to expand...
Click to collapse
Ok thanks.
Still looking for help guys. Really need my phone up and running, I got a job to run.
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
ScouseCarl said:
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
Click to expand...
Click to collapse
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
ScouseCarl said:
UPDATE: Installed XENONHD ROM and it has got passed the HTC Quietly Brilliant screen and moved onto their load up screen.
BUT, then resets backs to the HTC load up screen then back to there's.
Any more help is appreciated and am willing to donate to them for getting my phone back online.
Click to expand...
Click to collapse
You have to be careful with No o.s installed .
Normally if u reboot when u see that you'll brick.
Without a o.s you have no bootloader..
I bricked my s3 and had to jtag it when it said no o.s I rebooted and black blank screen nothing.
I've had this happen also when choosing format system and format data /media some reason it botches the boot up .
My only fix was to sideload a rom or wipe factory and restore a nandroid .
Sent from my M7 using xda premium
iamfightaa said:
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
Click to expand...
Click to collapse
Thankyou.
How long is that about as I am in UK.
lojak29 said:
You have to be careful with No o.s installed .
Normally if u reboot when u see that you'll brick.
Without a o.s you have no bootloader..
I bricked my s3 and had to jtag it when it said no o.s I rebooted and black blank screen nothing.
I've had this happen also when choosing format system and format data /media some reason it botches the boot up .
My only fix was to sideload a rom or wipe factory and restore a nandroid .
Sent from my M7 using xda premium
Click to expand...
Click to collapse
No i got a ROM working, the XenonHD.
I am basically I think stuck in a bootloop, I am currently sideloading the ROM again wiped the data and that.
So going to check again inabit.
After all that did you try erasing cache one more time? Maybe through recovery or fastboot?
Sent from my HTC One using xda app-developers app
iamfightaa said:
I think i will be able to help you, am at work atm but when i get home around 6:30 pm est i will teamviewer with you to try to get you back on track.
Click to expand...
Click to collapse
Thanks for helping him. I just didn't feel comfortable working on this when I have not done it on my own phone first.
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
ScouseCarl said:
Thankyou.
How long is that about as I am in UK.
Click to expand...
Click to collapse
in about 2 - 3 hours from now.
---------- Post added at 04:12 PM ---------- Previous post was at 04:08 PM ----------
ScouseCarl said:
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
Click to expand...
Click to collapse
my recomendation is that you get s -off and supercid asap so next time you run into a similar problem you can just install any ruu(note only do this if your phone has no official ruu) and work it out from there.
ScouseCarl said:
Okay guys i will add a thanks to all your posts.
My phone is now working I got it to stop bootlooping but just need a little help to check if my phone is rooted and what not.
So how can i check since I have nothing on my phone including the playstore or anything.
Click to expand...
Click to collapse
What ROM did you flash? It should say if it was rooted (most are).
ScouseCarl said:
Thankyou.
How long is that about as I am in UK.
No i got a ROM working, the XenonHD.
I am basically I think stuck in a bootloop, I am currently sideloading the ROM again wiped the data and that.
So going to check again inabit.
Click to expand...
Click to collapse
What you need to do is this exactly .
Dload a rom on pc reboot recovery on phone first .IMORTANT FIRST FORMAT SYSTEM.
Then when that's done choose factory reset.
Rename the rom to Rom.zip or anything you want but make sure it says.zip
Sometimes sideload won't work if roms not renamed , that's mentioned in another thread about sideloading.
Then sideload the rom
Let it load and install .
When it reboots itl take a while .
I just did this to my HTC one the other day after I got stuck after formating data media .
Sent from my M7 using xda premium
lojak29 said:
What you need to do is this exactly .
Dload a rom on pc reboot recovery on phone first .IMORTANT FIRST FORMAT SYSTEM.
Then when that's done choose factory reset.
Rename the rom to Rom.zip or anything you want but make sure it says.zip
Sometimes sideload won't work if roms not renamed , that's mentioned in another thread about sideloading.
Then sideload the rom
Let it load and install .
When it reboots itl take a while .
I just did this to my HTC one the other day after I got stuck after formating data media .
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Yeah my phone is currently working now, but I have no play store nor do I now if my phone is rooted.
I have a custom ROM on it XenonHD. http://forum.xda-developers.com/showthread.php?t=2290785
That one.
Just currently trying to get to grips on how to work it and that.
I can't download the playstore because it says it is currently installed but it is nowhere to be seen.
Hi!
Have used CROMBI KK for some time, but somehow my TF201 startes to lag and not respond.
So what steps do i have to do to get back on Stock rom??
A guide will be helpfull or any advice on changing to another ROM, thx.
munch, munch, munch.
Can no one help!!
Prime is acting more and more strange, so i want to go back to stock rom, please help!
SharDK said:
Prime is acting more and more strange, so i want to go back to stock rom, please help!
Click to expand...
Click to collapse
You can return to stock with the asus blob .....
Use fastboot to flash said blob and you will be back to stock ...
Let me know if you need any help along the way ....
Thx Josh
Thx Josh, i'll give it a go.
Im not a pro at this so just to clarify it, i know that u are busy, but would you be able to write a few lines
I remember that i took backup when installing Crombi KK. Can say that the last week it has been running smoother.
But still have some apps that just dosn´t work.
I might not do the transfer now, but then i have it, so i can do it at the holidays.
Following the thread on the Katkiss 5.0 i migth have a go at this!
SharDK said:
Thx Josh, i'll give it a go.
Im not a pro at this so just to clarify it, i know that u are busy, but would you be able to write a few lines
I remember that i took backup when installing Crombi KK. Can say that the last week it has been running smoother.
But still have some apps that just dosn´t work.
I might not do the transfer now, but then i have it, so i can do it at the holidays.
Following the thread on the Katkiss 5.0 i migth have a go at this!
Click to expand...
Click to collapse
Verify your 'SKU'
Get the correct on for your tablet .....
Unzip the zip from asus TWICE and you will find the blob ....
Then go here and start with the first fastboot command .....
http://forum.xda-developers.com/transformer-prime/help/guide-t2864946
Dont forget to rename the blob to boot.blob and put it in your current directory .....
Let me know if you need any more help along the way ....
Thx Josh
Hi
Just done doing a revert, everything went fine until booting, nothing happens.
It just hangs on ASUS screen top corner says device is unlocked.
How long will it take to reboot ??
I think something went wrong with bootit.ko /
Now i can´t see the TP on win7, i can access bootloader ect.
Now i have done it twice, the Prime just hangs on the ASUS boot screen.
[PWR] + [VOL DOWN] is still working.
What can i do!! what am i missing following this http://forum.xda-developers.com/transformer-prime/help/guide-t2864946
SharDK said:
Now i have done it twice, the Prime just hangs on the ASUS boot screen.
[PWR] + [VOL DOWN] is still working.
What can i do!! what am i missing following this http://forum.xda-developers.com/transformer-prime/help/guide-t2864946
Click to expand...
Click to collapse
So you can still get to fastboot ?
Flash the blob again .....
Thx Josh
Thx. Josh
I flashed the blob again and now im getting past the boot screen.
lj50036 said:
So you can still get to fastboot ?
Flash the blob again .....
Thx Josh
Click to expand...
Click to collapse
Once it is back at stock how can I unroot safely and return to complete factory default?
---------- Post added at 03:09 PM ---------- Previous post was at 03:02 PM ----------
How can you unroot at this point and completely return to stock?
wtd03 said:
Once it is back at stock how can I unroot safely and return to complete factory default?
---------- Post added at 03:09 PM ---------- Previous post was at 03:02 PM ----------
How can you unroot at this point and completely return to stock?
Click to expand...
Click to collapse
If you flashed the stock asus blob you are stock...
No root, no custom recovery ....
Thx Josh
lj50036 said:
So you can still get to fastboot ?
Flash the blob again .....
Thx Josh
Click to expand...
Click to collapse
Well it says on boot that "The device is unlocked" I need to get that message removed
wtd03 said:
Well it says on boot that "The device is unlocked" I need to get that message removed
Click to expand...
Click to collapse
That message will never be removed ...
Once unlocked always unlocked .....
Thx Josh