Okay so I received an Asus Transformer Prime tf201 yesterday. This morning I was able to unlock it, root it, and then I wanted to install the latest nightly of CM10 (24th). After I saw that it was indeed rooted I booted into twrp and in Wipe I did Factory Reset, System, Internal Storage (wanted to get rid of the pictures, etc. from previous owner). I had CM10 latest nightly and gapps both on my External SD Card so I knew I wasn't removing those.
Anyway after clicking on Install and then Using external SD I selected the zip of CM10 and swiped to confirm flash. It does well for about 2 or 3 minutes (the blue bar even shows progress) and then it comes up with the message E:Unable to mount '/staging'.
Please please tell me I did not mess up my Prime when I just got it???!!! Anyone that can help please help as soon as possible as I am really wanting to play with this after all the fantastic reviews I have heard. You would have my eternal gratitude and if it is not wrong to do this I will even donate via PayPal to the person that can help me "fix" my Prime.
Please KNOW I have been looking for answers to this for HOURS today and still haven't found anything to help me. I am really hoping some genius on XDA can help me.
alias4ever said:
Okay so I received an Asus Transformer Prime tf201 yesterday. This morning I was able to unlock it, root it, and then I wanted to install the latest nightly of CM10 (24th). After I saw that it was indeed rooted I booted into twrp and in Wipe I did Factory Reset, System, Internal Storage (wanted to get rid of the pictures, etc. from previous owner). I had CM10 latest nightly and gapps both on my External SD Card so I knew I wasn't removing those.
Anyway after clicking on Install and then Using external SD I selected the zip of CM10 and swiped to confirm flash. It does well for about 2 or 3 minutes (the blue bar even shows progress) and then it comes up with the message E:Unable to mount '/staging'.
Please please tell me I did not mess up my Prime when I just got it???!!! Anyone that can help please help as soon as possible as I am really wanting to play with this after all the fantastic reviews I have heard. You would have my eternal gratitude and if it is not wrong to do this I will even donate via PayPal to the person that can help me "fix" my Prime.
Please KNOW I have been looking for answers to this for HOURS today and still haven't found anything to help me. I am really hoping some genius on XDA can help me.
Click to expand...
Click to collapse
Did you check in twrp under the mounts button? I don't have my prime with me atm but I know there is a mounts section either on the first screen or under advanced may be....
Gage_Hero said:
Did you check in twrp under the mounts button? I don't have my prime with me atm but I know there is a mounts section either on the first screen or under advanced may be....
Click to expand...
Click to collapse
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
alias4ever said:
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
Click to expand...
Click to collapse
Mine, the radio button for external is on, you could try the terminal under advanced button...command would be something like su then enter and then mount /staging or something like that.... you may want to check the command exactly, my terminal skills are limited...
alias4ever said:
Yeahup I tried mounting everything and then unmounting everything to try and get it to work. What should be mounted/unmounted and selected on either SD Card or Internal? THANKS!
Click to expand...
Click to collapse
Probably running TRWP 2.3.x.x, right? Some others had this same problem with the TF300 and switched back to TWRP 2.2.2.1 and their ROM flashed just fine. Might be worth a shot.
tedr108 said:
Probably running TRWP 2.3.x.x, right? Some others had this same problem with the TF300 and switched back to TWRP 2.2.2.1 and their ROM flashed just fine. Might be worth a shot.
Click to expand...
Click to collapse
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Gage_Hero said:
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Click to expand...
Click to collapse
No, there is a 2.3 for both ics and jb bootloaders ... I THINK that 2.2 was ics only (can't remember for sure). If he was loading the CM10 nightly, he should have had an ics bootloader, or it would not have run.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
Gage_Hero said:
Isn't 2.3 for the JB bootloader and 2.2 for ics though?
Click to expand...
Click to collapse
You do bring up a good point, though ... if his TFP had a JB OTA, he could have the jb bootloader! Alias, you need to check these types of things out before moving forward.
tedr108 said:
No, there is a 2.3 for both ics and jb bootloaders ... I THINK that 2.2 was ics only (can't remember for sure). If he was loading the CM10 nightly, he should have had an ics bootloader, or it would not have run.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
You do bring up a good point, though ... if his TFP had a JB OTA, he could have the jb bootloader! Alias, you need to check these types of things out before moving forward.
Click to expand...
Click to collapse
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
alias4ever said:
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
Click to expand...
Click to collapse
If you had the JB bootloader before, then you surely still have it. You would not change your bootloader by flashing a CM10 nightly ROM. The only way that I know of for you to go back to an ICS bootloader is with nvflash. If nvflash was not on your TFP when you got it, you won't be getting it anytime soon, because it cannot be installed with a JB bootloader on your TFP.
Which TWRP 2.3.1 did you load? The JB version?
The CM10 nightlies are not currently compatible with a JB bootloader, so you had no hope of running it. That may very well have caused your staging error, but I am not sure. Since you apparently have a JB bootloader, you would have to flash an appropriate ROM, like Craig Gomez' (here). But, only the JB version of TWRP 2.3.1 will work for you, as far as I know. So, I'm thinking you must have loaded the correct one.
I cannot be 100% sure that you have the JB bootloader. I hope you are sure that your TFP was updated to JB by an Asus update (OTA).
If I were you, I'd make a plan of action and post it here. Be patient and wait for a response, before moving forward. Good luck with this.
alias4ever said:
I had the JB OTA before starting I do know that. Would have kept it if I didn't love CM so much! So would I just install twrp 2.2 through fastboot then like I did the 2.3.1.0 that I have now? Or is there another way I can do this? Thank you BOTH for your help! It is much appreciated! :good:
Click to expand...
Click to collapse
the only way back to an ics bootloader it through nvflash... if you didn't do nvflash before you started with JB then you are stuck using jb roms only I think.....you could try hairy bean .....
tedr108 said:
If you had the JB bootloader before, then you surely still have it. You would not change your bootloader by flashing a CM10 nightly ROM. The only way that I know of for you to go back to an ICS bootloader is with nvflash. If nvflash was not on your TFP when you got it, you won't be getting it anytime soon, because it cannot be installed with a JB bootloader on your TFP.
Which TWRP 2.3.1 did you load? The JB version?
The CM10 nightlies are not currently compatible with a JB bootloader, so you had no hope of running it. That may very well have caused your staging error, but I am not sure. Since you apparently have a JB bootloader, you would have to flash an appropriate ROM, like Craig Gomez' (here). But, only the JB version of TWRP 2.3.1 will work for you, as far as I know. So, I'm thinking you must have loaded the correct one.
I cannot be 100% sure that you have the JB bootloader. I hope you are sure that your TFP was updated to JB by an Asus update (OTA).
If I were you, I'd make a plan of action and post it here. Be patient and wait for a response, before moving forward. Good luck with this.
Click to expand...
Click to collapse
Okay let's see if I can get this is all right. I have The JB version of TWRP 2.3.1. As for running a different ROM I tried the Unofficial one you listed and it still gives me the Unable to mount 'staging/' error. It first says it is verifying the signature then update package, then it says Updating partition details and that is when it comes to the staging error. :crying:
I am 110% positive that my TFP was updated to JB by the Asus update (OTA). Thanks again for the suggestions hopefully someone out there will suggest something.
What about doing the PRIME FULL WIPE that someone suggests here: http://forum.xda-developers.com/showthread.php?t=1670824 Then trying to install the Unofficial CM10 with the JB Bootloader? Anyone know if this would work?
alias4ever said:
Okay let's see if I can get this is all right. I have The JB version of TWRP 2.3.1. As for running a different ROM I tried the Unofficial one you listed and it still gives me the Unable to mount 'staging/' error. It first says it is verifying the signature then update package, then it says Updating partition details and that is when it comes to the staging error. :crying:
I am 110% positive that my TFP was updated to JB by the Asus update (OTA). Thanks again for the suggestions hopefully someone out there will suggest something.
What about doing the PRIME FULL WIPE that someone suggests here: http://forum.xda-developers.com/showthread.php?t=1670824 Anyone know if this would work?
Click to expand...
Click to collapse
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Read this thread... this guy was in the same boat... page 2 post 19 is where he fixed it....
http://forum.xda-developers.com/showthread.php?t=1942927&highlight=unable+to+mount+staging&page=2
@Alias -- I was really hoping the JB bootloader ROMs would do it for you.
This right here is excellent advice from Gage_Hero:
Gage_Hero said:
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Click to expand...
Click to collapse
If this does not work, I am at a loss of how to recreate the Staging partition (and perhaps others), but there is probably a way.
Gage_Hero said:
I wouldn't try the full wipe... what I would try is the fix permissions button under advanced.... failing that... I would try fastboot install of twrp 2.3 again (instructions on the twrp OP).... it is like you don't have rights to write to the staging partition...
Read this thread... this guy was in the same boat... page 2 post 19 is where he fixed it....
http://forum.xda-developers.com/showthread.php?t=1942927&highlight=unable+to+mount+staging&page=2
Click to expand...
Click to collapse
You are an ABSOLUTE GENIUS! I remember reading that post of the guy in the same boat and honestly did not think it would work for me because I kept trying to install the different ROM's but it WORKED! Thank you, thank you, THANK YOU to you and everyone else for their suggestions! @Gage, can I send you a little thank you on PayPal??? Thank you so MUCH AGAIN! I can't thank you enough...
Now do I dare flash the CM10 Unofficial with the JB Boatloader through GooManager??? :silly:
alias4ever said:
You are an ABSOLUTE GENIUS! I remember reading that post of the guy in the same boat and honestly did not think it would work for me because I kept trying to install the different ROM's but it WORKED! Thank you, thank you, THANK YOU to you and everyone else for their suggestions! @Gage, can I send you a little thank you on PayPal??? Thank you so MUCH AGAIN! I can't thank you enough...
Now do I dare flash the CM10 Unofficial with the JB Boatloader through GooManager??? :silly:
Click to expand...
Click to collapse
Glad to get you up and running again just do yourself a favor before you try cm10.... make a backup... or 2 I never used cm on my tab but did it on my phone.... when I restored... I had to do it twice... not sure if that is the case with the prime or not ... but if it is a JB bootloader then you should be okay... I like flashing through twrp though .. never did a rom through goo... but I am sure it works...
I need a little more help now. I went to boot into TWRP last night and I just got the dead Andy. Does that mean that putting this stock JB back on my TFP I have lost my TWRP recovery?
My TFP is rooted though as I have SU in my app drawer and I installed Titanium Backup just fine. I just wanted to make a couple of backups of my TFP (one to save on my PC and one to save on my TFP's External SD. So my question is can I reinstall my TWRP through Fastboot like I did before even with it rooted? First time I did it I followed these instructions:
http://www.youtube.com/watch?v=-pW05Jf87dg&feature=plcp
But upon further reading it states that people have had problems installing JB ROMs with using the 2.3 or 2.3.1 version so should I install the 2.2 version? Please someone help me yet again possibly??? THANKS!
alias4ever said:
I need a little more help now. I went to boot into TWRP last night and I just got the dead Andy. Does that mean that putting this stock JB back on my TFP I have lost my TWRP recovery?
My TFP is rooted though as I have SU in my app drawer and I installed Titanium Backup just fine. I just wanted to make a couple of backups of my TFP (one to save on my PC and one to save on my TFP's External SD. So my question is can I reinstall my TWRP through Fastboot like I did before even with it rooted? First time I did it I followed these instructions:
http://www.youtube.com/watch?v=-pW05Jf87dg&feature=plcp
But upon further reading it states that people have had problems installing JB ROMs with using the 2.3 or 2.3.1 version so should I install the 2.2 version? Please someone help me yet again possibly??? THANKS!
Click to expand...
Click to collapse
I think people have had issues installing 2.2 on the JB bootloader I would fastboot install 2.3.1 there is no reason it shouldn't work..... I think there is some disconnect between twrp and some of the jb roms as some devs are including twrp in their install like Mr.Wookie over at team wookie.....
Gage_Hero said:
I think people have had issues installing 2.2 on the JB bootloader I would fastboot install 2.3.1 there is no reason it shouldn't work..... I think there is some disconnect between twrp and some of the jb roms as some devs are including twrp in their install like Mr.Wookie over at team wookie.....
Click to expand...
Click to collapse
Okay so I went ahead and have redone TWRP 2.3.1 via Fastboot. I then did a backup of my ROM twice onto my External SD card. After that I did a a Factory Reset through TWRP of course and then installed the Unofficial CM10 with JB Bootloader. I still got the E:can not mount '/staging' but I went ahead and installed the Gapps that was listed on the thread as well and then wiped davlik cache and regular cache. Rebooted and I am VERY HAPPY to say it FINALLY worked this time!
I was ecstatic to see that CyanogenMod symbol come up. I made sure to wait 10 minutes to let the ROM settle before doing anything and it looks very nice!
I am confused as to why it worked the second time or even worked with the staging error as well when it didn't last time. Maybe because I didn't do the wipe Internal in TWRP? Who knows all I know is my Asus is working wonderfully and I am SO HAPPY to have it back! Thank you again everyone for all your help, I LOVE THIS FORUM! :laugh: :good:
alias4ever said:
Okay so I went ahead and have redone TWRP 2.3.1 via Fastboot. I then did a backup of my ROM twice onto my External SD card. After that I did a a Factory Reset through TWRP of course and then installed the Unofficial CM10 with JB Bootloader. I still got the E:can not mount '/staging' but I went ahead and installed the Gapps that was listed on the thread as well and then wiped davlik cache and regular cache. Rebooted and I am VERY HAPPY to say it FINALLY worked this time!
I was ecstatic to see that CyanogenMod symbol come up. I made sure to wait 10 minutes to let the ROM settle before doing anything and it looks very nice!
I am confused as to why it worked the second time or even worked with the staging error as well when it didn't last time. Maybe because I didn't do the wipe Internal in TWRP? Who knows all I know is my Asus is working wonderfully and I am SO HAPPY to have it back! Thank you again everyone for all your help, I LOVE THIS FORUM! :laugh: :good:
Click to expand...
Click to collapse
Good to hear.... not sure if your aware or not but with a decent backup ( I do one everytime I think I am going to try something foolish) even if you do a wipe, as long as you can reach twrp you can restore the prime to it's state before you started messing with it....
Related
I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
push
dylan.mfh said:
I feel like i've read every thread and tried everything.. hope some one can help?
The Problem:
I had a semi working JB rom and i tried to flash a new rom due to lag and stutter from the one that was on it now I cannot boot past the EEE Pad (asus/nvidia) screen - just sits here with the text on the left corner "AndroidRoot 9.4.2.28r01
The Hope:
I can access CWM, fastboot, ADB etc :silly:
The Attempt:
Almost everything i can find, erasing through fastboot, cwm, installing different roms etc. I've tried flashing a new blob from the official asus download through fastboot but i get an error when putting it through....
Any one have ideas on what it might be, is there hope? or is this money down the drain?
Click to expand...
Click to collapse
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
McJesus15 said:
I believe you tried to flash a JB rom without the JB boot loader. If you have nvflash enabled then that's you're only recovery option. Other than that it's dead. Asus can fix it for a fee.
Click to expand...
Click to collapse
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Ah my bad. Saw the Androidroot number thing and assumed it was the nvflash boot loader.
Sent from my Transformer Prime TF201 using xda app-developers app
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
flumpster said:
He says he can access Cwm fastboot and adb so he is not dead.
I will help you when I am at my pc later.
Edit. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end is a long number. Does this number start with a 9 or a 10?
I am not talking about androidroot number but the one in the long line with bootloader in it.
Click to expand...
Click to collapse
Sent from my Samsung Chromebook.
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan.
Click to expand...
Click to collapse
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
flumpster said:
You have the same problem as someone I fixed not long ago.
Please read thru the following thread and post back here if you get stuck at any point.
http://forum.xda-developers.com/showthread.php?t=2009284
Click to expand...
Click to collapse
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
dylan.mfh said:
Thank you thank you thank yoououuu!!! WOW you are the best!!!!
for any one trying to figure this out, i looked up android wook 1.3 on the android dev upload site and got it through there!!
Thank you soo much! Can i donate $5 and buy you a beer?
Click to expand...
Click to collapse
It's ok thanks mate, I have loads of beer
Enjoy your prime
dylan.mfh said:
So very sorry about the delay in a response and thank you very much for your replies!
I have attached a picture of (what i think) you are talking to. I believe what you are asking for is a 9.
Dylan
Sent from my Samsung Chromebook.
Click to expand...
Click to collapse
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
eyecubed said:
It looks like I have the exact same problem but my number starts with a 10. I would be eternally grateful if someone could help. I have searched for hours and have had not luck ;(
---------- Post added at 02:50 PM ---------- Previous post was at 02:40 PM ----------
How I did this...
I was running CM 10 with the jb bootloader and I figured I'd update before going on a trip.
I decided to try AndroWook but couldn't get it to boot. I couldn't get it to work or figure out why. When I recovered CM, no problem. So I decided to give it one more go and downloaded AndroWook 1.3 and installed as if I was updating the bootloader.
Been in ruins ever since ;(
I can get to fastboot and adb but can't boot into recovery! I tried flashing a new recovery through fastboot. I am either missing something or it is not working.
Thanks for anyone that can point me in a direction.
Click to expand...
Click to collapse
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
whycali said:
Just install the regular version of this http://forum.xda-developers.com/showpost.php?p=34937936&postcount=6210 . put a Jellybean rom either Androwook 1.51 or nrgz latest from the developers thread on a micro sd card. And then use this to flash a new rom. Do not forget to wipe cache, dalvik and factory reset. You can actually wipe anything EXCEPT FOR EXTERNAL SD.
Click to expand...
Click to collapse
Fixed him over pm about 6 hours ago mate lol
flumpster said:
Fixed him over pm about 6 hours ago mate lol
Click to expand...
Click to collapse
um, updates are nice
Hey guys have to forgive me very tired spent last 11 hours trying to get this working again but im stuck now and im at my wits end.
the situation
Tried to downgrade my tab from a rom that could not be rooted some ics 4.0.3 build .20 i think it ended with to .15 everything was going fine until it rebooted it just sat on the eepad logo and rebooted ect.
anyway cut a very long night short i have CWM on it version 5.8.2.0 i can get to the fastboot thing but i have a problem now as there appears to be nothing on it i might of deleted somthing i dont remember to tired but theres no data on it no backups nothing.
so its just sitting in CWM atm i cant copy anything to it as it says permission denied i have no way of copying a rom over to it that i know of to get clock work mod to install it when i go to update it with a zip on the sd card the only directory that comes up is clockworkmod
is this beyond help now? or is there somthing i can do please help.
thanks.
Seyah said:
Hey guys have to forgive me very tired spent last 11 hours trying to get this working again but im stuck now and im at my wits end.
the situation
Tried to downgrade my tab from a rom that could not be rooted some ics 4.0.3 build .20 i think it ended with to .15 everything was going fine until it rebooted it just sat on the eepad logo and rebooted ect.
anyway cut a very long night short i have CWM on it version 5.8.2.0 i can get to the fastboot thing but i have a problem now as there appears to be nothing on it i might of deleted somthing i dont remember to tired but theres no data on it no backups nothing.
so its just sitting in CWM atm i cant copy anything to it as it says permission denied i have no way of copying a rom over to it that i know of to get clock work mod to install it when i go to update it with a zip on the sd card the only directory that comes up is clockworkmod
is this beyond help now? or is there somthing i can do please help.
thanks.
Click to expand...
Click to collapse
I will help you when I am at pc later. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end of the line with bootloader in it is a long number. Does this number start with a 9 or a 10?
flumpster said:
I will help you when I am at pc later. Get me this info ready please. Power off prime. Hold down volume down and power. When the icons appear for fastboot etc look at the top left where the writing is and at the end of the line with bootloader in it is a long number. Does this number start with a 9 or a 10?
Click to expand...
Click to collapse
Thanks Flumper and thanks for the reply forgive my late reply i have been asleep just got up walked in the front room theres my broken prime
anyway the number at the top starts with a 9
9.4.2.15--20120221 A03
Seyah said:
Thanks Flumper and thanks for the reply forgive my late reply i have been asleep just got up walked in the front room theres my broken prime
anyway the number at the top starts with a 9
9.4.2.15--20120221 A03
Click to expand...
Click to collapse
Sounds just broke not bricker.. if flumpster can't get ya goin then your bricked.... i think its is fixable.
Seyah said:
Thanks Flumper and thanks for the reply forgive my late reply i have been asleep just got up walked in the front room theres my broken prime
anyway the number at the top starts with a 9
9.4.2.15--20120221 A03
Click to expand...
Click to collapse
Ok, you are on the ICS bootloader at the moment. The first thing we are going to do is flash a version of TWRP recovery on there which will allow you to install a rom off the external SD.
Power off the prime and put yourself into fastboot mode by holding power button and volume down the same time until a few icons appear on the screen. At this point press volume down to go over to the usb icon and then press volume up. It will look like the prime has frozen. Plug the prime into pc and make sure you have the drivers installed. If you do not please install them from here. http://forum.xda-developers.com/showthread.php?t=1426502
Next follow this post to flash ICS twrp http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705
Only use the file in that link to install it while on ICS bootloader. Later on you are going to flash hairybean 1.3 which will take you up to Jellybean Bootloader. If you use this file after that you will brick your tablet.
After you have TWRP installed put a rom Hairybean 1.3 onto the external sd and then go into twrp and select wipe. Factory reset, wipe cache, wipe dalvik and wipe system.
Press back and click install.. Now click the external button to select external sd card and click on the hairybean 1.3 rom.
Follow all instruction in the following post to install 1.3 http://forum.xda-developers.com/showthread.php?t=1674827
Once you have done them all and have now installed Hairybean 1.3 and the new Jellybean twrp and it is all running fine then please feel free to update to Hairybean 1.4.
Hi flumper thanks again for your help..
Im up to the part where i have TWRP installed from you link above, I have downloaded HB 1.3, and i'm a little bit unsure of how to get the rom to the external sd card, I have mounted the external SD-card in TWRP, but adb devices does not list my pad as connected, how do i push the rom over to install? Not sure how to proceed your warning about bricking it has scared the poop out of me
again i can't thank you enough for the help you have provided me.
=== Forgive me i have re-read you post, following instruction's for the 1.3 HB install now will get back to you.
Seyah said:
Hi flumper thanks again for your help..
Im up to the part where i have TWRP installed from you link above, I have downloaded HB 1.3, and i'm a little bit unsure of how to get the rom to the external sd card, I have mounted the external SD-card in TWRP, but adb devices does not list my pad as connected, how do i push the rom over to install? Not sure how to proceed your warning about bricking it has scared the poop out of me
again i can't thank you enough for the help you have provided me.
=== Forgive me i have re-read you post, following instruction's for the 1.3 HB install now will get back to you.
Click to expand...
Click to collapse
I think you have worked it out by now but just put your external sd card into a card reader on your pc and copy it over then put it back in the prime.
Make sure you delete that zip from installing twrp earlier and never use it again.. There will be another one included in the HB 1.3 zip that you extract and flash for a different twrp at about step 8.
flumpster said:
I think you have worked it out by now but just put your external sd card into a card reader on your pc and copy it over then put it back in the prime.
Make sure you delete that zip from installing twrp earlier and never use it again.. There will be another one included in the HB 1.3 zip that you extract and flash for a different twrp at about step 8.
Click to expand...
Click to collapse
Okay Flumper, just a small problem i have encountered i have followed the instructions, I have the 1.3 HB install over on my external SD, I can install it but the first part, wipe all the cache ect but i keep getting errors unable to mount system, unable to mount data, should I just try and install your HB 1.3 or am I going to brick it even more? oh and i don't think the boot loader is unlocked well i don't think it is.
it is unlocked Flumper, i have installed the rom and its booting i did notice a failed to mount /staging at the end but everything installed ok moving on with the install.
== update ==
Flumper your a true boffin! its installing now and will update to 1.4 when its done its working now and i thank you VERY much for your help and support i have popped a £50 donation to red cross to support the people after Sandy and will continue to use your rom.
Thank you so much again and everyone here at XDA.
Karen.
Seyah said:
it is unlocked Flumper, i have installed the rom and its booting i did notice a failed to mount /staging at the end but everything installed ok moving on with the install.
== update ==
Flumper your a true boffin! its installing now and will update to 1.4 when its done its working now and i thank you VERY much for your help and support i have popped a £50 donation to red cross to support the people after Sandy and will continue to use your rom.
Thank you so much again and everyone here at XDA.
Karen.
Click to expand...
Click to collapse
Just a side note I never no which kernel to use and 1.4 has 7 of them which do you recommend?
Seyah said:
Just a side note I never no which kernel to use and 1.4 has 7 of them which do you recommend?
Click to expand...
Click to collapse
Glad you got it all working mate. I recommend clemsyns 1.7 kernel.
Seyah said:
Just a side note I never no which kernel to use and 1.4 has 7 of them which do you recommend?
Click to expand...
Click to collapse
i went with the 1.7Ghz OC kernal good bye Asus bloatware.
Seyah said:
i went with the 1.7Ghz OC kernal good bye Asus bloatware.
Click to expand...
Click to collapse
I gotta stop calling people mate lol. I just presume most of the people I respond to are men, my bad
flumpster said:
I gotta stop calling people mate lol. I just presume most of the people I respond to are men, my bad
Click to expand...
Click to collapse
Don't worry about it Flumper, i'm used to it lol
Seyah said:
Don't worry about it Flumper, i'm used to it lol
Click to expand...
Click to collapse
Keep an eye on the androwook thread. 1.5 will be out next week as we are beta testing it now. It includes the latest patch from asus that came out about 2 weeks ago and other fixes/improvements.
Now that you are on the jellybean bootloader you might want to try a custom twrp I made. It will probably have a more logical layout for you as you've never used twrp before. http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
Flash in fastboot the same as before.
P. S. It's Flumpster with an st
flumpster said:
Keep an eye on the androwook thread. 1.5 will be out next week as we are beta testing it now. It includes the latest patch from asus that came out about 2 weeks ago and other fixes/improvements.
Now that you are on the jellybean bootloader you might want to try a custom twrp I made. It will probably have a more logical layout for you as you've never used twrp before. http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
Flash in fastboot the same as before.
P. S. It's Flumpster with an st
Click to expand...
Click to collapse
Lol so it's, my mistake Flumpster i'm going to do that now.
*Huggs FlumpSTer for all his help and his alter ego Flumper
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
zosopage said:
Hey all,
I was flashing a new rom and ran into some issues.
I have the new rom on the SD Card, but when I go into TWRP (2.2.0) and go to install,
I can not access the SD card. It shows in the tree, but it is not showing anything on it. I have accidently removed my backup by doing a wipe on everything. Am I done and have to replace it ?
Click to expand...
Click to collapse
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
flumpster said:
You should be ok at the moment but we are going to take this one step at a time.
I need to know what bootloader you are on before we progress.
Power off the machine and hold down power down and volume down the same time for about 10 seconds until the icons appear on your screen (usb icon, wipe etc) look up the top left of your screen and there will be text with a long number at the end, it will either start with a 9 or a 10. What is this number?
Also what rom do you want to put on ?
Click to expand...
Click to collapse
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
zosopage said:
I was running cm10 for a helluva long time, but was doing this energy one. states bootloader 2.10 e?
Click to expand...
Click to collapse
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
flumpster said:
Hmmm that is not really what I was after.. Let's try another way as I think you will be on ICS bootloader if running an old version of CM10,
Switch on machine and tell me where the Tegra logo is. If it down the bottom center it is ICS bootloader, if it is down the bottom right it is JB bootloader.
Click to expand...
Click to collapse
Powered by Nvidia Tegra, bottom center
zosopage said:
Powered by Nvidia Tegra, bottom center
Click to expand...
Click to collapse
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
flumpster said:
Ok, you are still on ICS bootloader.
First of all I would do the nvflash process if you haven't before. http://androidroot.mobi/t3_nvflash/ This can only be done while on ICS and once you have backed up the files created during the process you can never fully hard brick your device.
Then to get you up to the new rom.
Grab the ICS TWRP UPDATER.zip from this thread. http://forum.xda-developers.com/showpost.php?p=34477681&postcount=5705 You will extract the zip file and run the bat file and follow the onscreen instructions to flash it. You will only ever use this once and will allow you to put the Jellybean bootloader and rom onto the external SD to flash it. Never use the file again once you have flashed the Jellybean bootloader as it will brick you. You will flash a JB version of TWRP after the JB bootloader has been installed.
After that is installed you want to go to post 2 here http://forum.xda-developers.com/showthread.php?t=1674827 and follow the insructions for "Upgrade Instructions for ICS"
If you wanted to install energy rom instead of Hairybean just replace the hairybean 1.51 rom in the instructions with energy rom and do the same.
Click to expand...
Click to collapse
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
zosopage said:
Thanks for the help. I am trying to get into fastboot USB and the prime jst sits there. I am wondering if I don't have the drivers correct for windows XP. any idea where to get those?
Click to expand...
Click to collapse
When you click up on the USB icon and it says entering fastboot mode and freezes that is normal. That means you are in fastboot.
Look in device manager and see if you have any exclamation marks by anything, if you do then you don't have the drivers installed.
Get them here http://forum.xda-developers.com/showthread.php?t=1426502
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
zosopage said:
Thank you so very much. You saved me tremendously. The ROM is being installed right now and seems to be going fine. And as a plus, I have a pretty cool Recovery now...I was originally thinking that I was going to have to figure out how to explain to the wife that I broke my tab and was going to have to get a nexus 10...
UPDATE, ROM installned and booting right now...now to restore all my apps...
A great learning experience....
Z
Click to expand...
Click to collapse
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
flumpster said:
I'm guessing you installed my custom TWRP that looks like JB
Glad you got it all sorted mate.. Enjoy
Click to expand...
Click to collapse
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
zosopage said:
thanks... now I feel like an idiot as I installed a rom that you are not part of... now that I figured out that 2.12.12 means DEC 2, 2012.. I am going to try the one that you are connected with... thanks again!
Z
Click to expand...
Click to collapse
It doesn't matter which rom you install mate. I knew you wanted to install Energy rom when you started and it makes no difference to me.
Energy and Hairybean are both great roms and both based off stock just that Hairybean looks more like stock and Energy is themed.
Try them both and find which one suits you best
Unbrick Prime
It sounds like you have some good help here and hopefully you can get through this problem.. I just wanted to drop my two cents. Good thing to remember is to be on the latest Recovery (as you mentioned TWRP, make sure its always the latest esp. when flashing JB ROM's). Also if you can't unbrick it, head over to this thread here and here where I personally had a lot of assistance unbricking my Prime from a hard brick using nvflash. Good luck.
I have been running hariybean 2.31 for quite some time but saw some kitkat based roms are now available so I thought I would try on out. As a precursor, I had to upgrade my TWRP to the 2.6.3 version that supports KK. I did the upgrade using the terminal emulator method and it seems to have installed correctly but now, when I start recovery, it asks for a password to contiue. If you cancel out of it, then you do not have access to the partitions and I assume they are encrypted.
I cannot find a password listed anywhere, nor did i set one on my machine. I am rooted currently and unlocked. I also tried to downgrade TWRP back to the 2.5.0.0 version but i cant seem to do that either, it seems to instal, but when I go back into recovery, it is still the 2.6.3.0 version.
Can anybody help me? want to either get the password, disable the password (without loosing my data) or downgrade back to a version that will not request a password.
Detailed steps to accomplish any of the above would be greatly appriceiated!
jismail said:
I have been running hariybean 2.31 for quite some time but saw some kitkat based roms are now available so I thought I would try on out. As a precursor, I had to upgrade my TWRP to the 2.6.3 version that supports KK. I did the upgrade using the terminal emulator method and it seems to have installed correctly but now, when I start recovery, it asks for a password to contiue. If you cancel out of it, then you do not have access to the partitions and I assume they are encrypted.
I cannot find a password listed anywhere, nor did i set one on my machine. I am rooted currently and unlocked. I also tried to downgrade TWRP back to the 2.5.0.0 version but i cant seem to do that either, it seems to instal, but when I go back into recovery, it is still the 2.6.3.0 version.
Can anybody help me? want to either get the password, disable the password (without loosing my data) or downgrade back to a version that will not request a password.
Detailed steps to accomplish any of the above would be greatly appriceiated!
Click to expand...
Click to collapse
This is all down to a lack of reading mate. What does the disclaimer say in the hairybean thread under the big red writing saying "read everything carefully"
flumpster said:
This is all down to a lack of reading mate. What does the disclaimer say in the hairybean thread under the big red writing saying "read everything carefully"
Click to expand...
Click to collapse
Couldn't he use the NVFlash Guide and put the Flatline_TF300.img back onto the device?
feyerbrand said:
Couldn't he use the NVFlash Guide and put the Flatline_TF300.img back onto the device?
Click to expand...
Click to collapse
Does he have his nvflash backups? I didn't notice him post that.
He needs to try the following and try to get back on the correct TWRP for that bootloader before downgrading.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
If neither of them work for him then he can still be fixed but I'm gonna need to wipe the machine.
flumpster said:
Does he have his nvflash backups? I didn't notice him post that.
He needs to try the following and try to get back on the correct TWRP for that bootloader before downgrading.
http://forum.xda-developers.com/showpost.php?p=40149294&postcount=8
If neither of them work for him then he can still be fixed but I'm gonna need to wipe the machine.
Click to expand...
Click to collapse
I'm going to be honest with you, the reason I was interested is I made the bonehead mistake of not downgrading to 4.1 before attempting to flash the KK twrp. Looks like the link you sent fixed the recovery just fine without needing NVFlash (At least in my case) if only I knew how to actually develop roms better. I want a 4.4.2 Linaro AOSP ROM with ART optimization (Or Vanir) for the Prime on the 4.2 bootloader... that would be pretty awesome.
feyerbrand said:
I'm going to be honest with you, the reason I was interested is I made the bonehead mistake of not downgrading to 4.1 before attempting to flash the KK twrp. Looks like the link you sent fixed the recovery just fine without needing NVFlash (At least in my case) if only I knew how to actually develop roms better. I want a 4.4.2 Linaro AOSP ROM with ART optimization (Or Vanir) for the Prime on the 4.2 bootloader... that would be pretty awesome.
Click to expand...
Click to collapse
It really isn't as hard as everyone thinks if you know your way around linux a little bit. Glad you're fixed anyway and bloody read next time
Thanks for the replies so far. I now have made things even worse by using wipe in TWRP and now the OS is gone I have tried using the fastboot -I 0x0b05 flash recovery twrp.blob as suggested and it says it is writing it, but when it is done, it restarts into the same TWRP 2.6.3.0 version everytime. I have no data on the tablet that isn't already backed up (but I don't have NVflash) so I don't care how deep It needs to be formatted to get it back online again.
Any further suggestions or steps to take? I have ADB and Fastboot access but that seems to be all......
sheesh... all I wanted to do was try out KK
jismail said:
Thanks for the replies so far. I now have made things even worse by using wipe in TWRP and now the OS is gone I have tried using the fastboot -I 0x0b05 flash recovery twrp.blob as suggested and it says it is writing it, but when it is done, it restarts into the same TWRP 2.6.3.0 version everytime. I have no data on the tablet that isn't already backed up (but I don't have NVflash) so I don't care how deep It needs to be formatted to get it back online again.
Any further suggestions or steps to take? I have ADB and Fastboot access but that seems to be all......
sheesh... all I wanted to do was try out KK
Click to expand...
Click to collapse
Follow this http://forum.xda-developers.com/showthread.php?t=2409602
Where is says to use the TF300 stock blob just use the prime stock blob instead.
flumpster said:
Follow this http://forum.xda-developers.com/showthread.php?t=2409602
Where is says to use the TF300 stock blob just use the prime stock blob instead.
Click to expand...
Click to collapse
I finally got it back.
Did this list of commands:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\blob
fastboot -i 0x0B05 reboot
and that allowed me to overwrite the TWRP 2.6.3.0 and thus unencrypt the storage finally and then I just reinstalled the Harirybean zip again.
Thanks so much for all the help!
flumpster said:
It really isn't as hard as everyone thinks if you know your way around linux a little bit. Glad you're fixed anyway and bloody read next time
Click to expand...
Click to collapse
I do know a bit around linux, I have been using Ubuntu for about 3 years but not super familiar with things. I know basic commands in terminal and I know how to Google really well haha. Any chance you could PM me a list of starter guides because I really am interested in doing new development for the Prime. I am not getting a tablet anytime soon... due to money concerns and the fact that I just like the transformer series.
feyerbrand said:
I do know a bit around linux, I have been using Ubuntu for about 3 years but not super familiar with things. I know basic commands in terminal and I know how to Google really well haha. Any chance you could PM me a list of starter guides because I really am interested in doing new development for the Prime. I am not getting a tablet anytime soon... due to money concerns and the fact that I just like the transformer series.
Click to expand...
Click to collapse
I would advise not starting with a rom but starting with an app to get yourself used to using toolchains etc.
Take a look at compiling your own version of Gotham XBMC to get you started, the instructions on that are pretty good and straight forward.
https://github.com/xbmc/xbmc/blob/master/docs/README.android
flumpster said:
I would advise not starting with a rom but starting with an app to get yourself used to using toolchains etc.
Take a look at compiling your own version of Gotham XBMC to get you started, the instructions on that are pretty good and straight forward.
https://github.com/xbmc/xbmc/blob/master/docs/README.android
Click to expand...
Click to collapse
Awesome I will get cracking on that over the weekend. I will see how that treats me and if it goes well I will let you know and see if I could be your padawan learner and hopefully build a vanilla Linaro AOSP Rom for the 4.2 bootloader some day.
The blob file helped a lot and I'm back with a working TWRP! Great work - thanks again!
But I'm kind of scared and confused right now, regarding KitKat ROMs. Do I really need NVFlash?
I guess the right road 2 kitkat would be:
1. downgrade my bootloader
2. install flatline & nvflash
3. install cw recovery?
4. install kitkat roms?
There is also KitKat TWRP - is this the right way?
Like I said - I'm super confused. ^^
wolwe said:
The blob file helped a lot and I'm back with a working TWRP! Great work - thanks again!
But I'm kind of scared and confused right now, regarding KitKat ROMs. Do I really need NVFlash?
I guess the right road 2 kitkat would be:
1. downgrade my bootloader
2. install flatline & nvflash
3. install cw recovery?
4. install kitkat roms?
There is also KitKat TWRP - is this the right way?
Like I said - I'm super confused. ^^
Click to expand...
Click to collapse
You are on Hairybean 2.31 at the moment? If so there are instructions somewhere in the hairybean thread on how to do nvflash backups while on there. Search is down at the moment so I can't find it for you.
flumpster said:
You are on Hairybean 2.31 at the moment? If so there are instructions somewhere in the hairybean thread on how to do nvflash backups while on there. Search is down at the moment so I can't find it for you.
Click to expand...
Click to collapse
AndroWook Hairybean 2.31 yessir!
I think I found the tutorial: http://forum.xda-developers.com/showthread.php?t=2407248&page=102
flumpster said:
You are on Hairybean 2.31 at the moment? If so there are instructions somewhere in the hairybean thread on how to do nvflash backups while on there. Search is down at the moment so I can't find it for you.
Click to expand...
Click to collapse
eh, ok is there a guide how to unbrick my device with these files? ^^
this one seems to be very near but I'm not so sure:
http://forum.xda-developers.com/showthread.php?p=48948717&highlight=bricksafe+img#post48948717
wolwe said:
eh, ok is there a guide how to unbrick my device with these files? ^^
this one seems to be very near but I'm not so sure:
http://forum.xda-developers.com/showthread.php?p=48948717&highlight=bricksafe+img#post48948717
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1927818&highlight=nvflash
flumpster said:
http://forum.xda-developers.com/showthread.php?t=1927818&highlight=nvflash
Click to expand...
Click to collapse
Allright, thanks a lot.
I'm now on ParanoidAndroid KitKat Rom via Voyagers TWRP Recovery. I'm curios how KitKat will perform on my TF201 over time.
Thanks for your help flumpster!
I have a TF201 and have loved it. Earlier this year after cracking the screen I decided to unlock, root and play around a bit. Installed CM11. I liked it and didn't have an issues with it. I went back to a stock version 2 days ago. I have quickly seen how much better performance was on CM11. But now there are some other KK roms out there, and I read on a thread you can actually install TF300 roms on a TF201 as well. What ROM do you suggest I try next? Crombi-X, Crombi-kk, CM11 (newer build) or another.
JoanneDisFan said:
I have a TF201 and have loved it. Earlier this year after cracking the screen I decided to unlock, root and play around a bit. Installed CM11. I liked it and didn't have an issues with it. I went back to a stock version 2 days ago. I have quickly seen how much better performance was on CM11. But now there are some other KK roms out there, and I read on a thread you can actually install TF300 roms on a TF201 as well. What ROM do you suggest I try next? Crombi-X, Crombi-kk, CM11 (newer build) or another.
Click to expand...
Click to collapse
If you head over to the Crombi-kk thread there is a step by step to upgrade to be able to run a 4.4.x rom ....
We do have some small issue like the CAM not working for the last 2 releases, BUT we got it fixed and the next
release will have it working ...
I dont think that you would be unhappy with any of the tf300 ROMs available for your 201 after you follow the steps
in post number 4 here on this thread http://forum.xda-developers.com/showthread.php?t=2773812
It would open up a whole new set of roms for your flashing pleasure..
Thx Josh & Team CROMBI-kk
Thanks Josh.
I'm learning towards either the Cromi-X or Crombi-KK. Are both still being developed? Is there a benefit to sticking with the TF201 version rather than the tf300 version?
I like several of the asus apps. Can I install those on any of the KK versions?
Hubby was also wondering which kernel would give the best wifi and speed?
JoanneDisFan said:
Thanks Josh.
I'm learning towards either the Cromi-X or Crombi-KK. Are both still being developed? Is there a benefit to sticking with the TF201 version rather than the tf300 version?
I like several of the asus apps. Can I install those on any of the KK versions?
Hubby was also wondering which kernel would give the best wifi and speed?
Click to expand...
Click to collapse
I would say that Cromi-X is close to the end of is development life, but having said that if there are bugs I know @sbdags would take care of them
WIth this ROM everything would be just like it is now fully supported dock all the asus apps.. etc .....
With Crombi-kk is still very much under development. But things are not quite as refined in this one, the dock has some small bugs
and there is an Asus app zip that can be flashed and will give you the stock Asus back
If you decide to go with Cromi-X i would choose _that's kernel for sure ...
If going with Crombi-kk I think that Grimlocks kernel is a very good one ...
I think that answers all your questions , nice post thx for that :good:
and always Thx Josh
So I've decided to go with Crombi-KK for the 201. I'm following the install instructions on the link you posted but running into a problem. I have the BL installed at TWRP 2.7 but when I try and do ads push of the crombi I get an error: device not found but if I do fastboot devices I do find my device.
JoanneDisFan said:
So I've decided to go with Crombi-KK for the 201. I'm following the install instructions on the link you posted but running into a problem. I have the BL installed at TWRP 2.7 but when I try and do ads push of the crombi I get an error: device not found but if I do fastboot devices I do find my device.
Click to expand...
Click to collapse
are you running the adb command from recovery ?
lj50036 said:
are you running the adb command from recovery ?
Click to expand...
Click to collapse
Not sure. I try to do it at the screen that gives me recovery as well at android to boot into. How would I get into adb in twrp?
JoanneDisFan said:
Not sure. I try to do it at the screen that gives me recovery as well at android to boot into. How would I get into adb in twrp?
Click to expand...
Click to collapse
Can you boot into twrp ?
lj50036 said:
Can you boot into twrp ?
Click to expand...
Click to collapse
Yes I can get TWRP up.
JoanneDisFan said:
Yes I can get TWRP up.
Click to expand...
Click to collapse
Found ADB sideload under advanced. Used sideload rather than push and it's now moving
JoanneDisFan said:
Found ADB sideload under advanced. Used sideload rather than push and it's now moving
Click to expand...
Click to collapse
Okay I take that back. It load 2-3% then I get the error: failed to write data ' protocol fault <No status>'
JoanneDisFan said:
Found ADB sideload under advanced. Used sideload rather than push and it's now moving
Click to expand...
Click to collapse
Well we need to get adb and fastboot working ....
Have you ever used G+ to do screenshare ?
Let me know
Thx Josh
No never have done a screen share. I'm starting with making sure I have the current version of adb. Downlaoding SDK at the moment. Fastboot worked fine.
JoanneDisFan said:
No never have done a screen share. I'm starting with making sure I have the current version of adb. Downlaoding SDK at the moment. Fastboot worked fine.
Click to expand...
Click to collapse
If you would like any help with getting adb working shoot me a hangouts at
[email protected]
thx Josh
EDIT
Hey XDA, This one has me doing some reading, The driver would install and the adb devices would show the device, but when we tried to push it would give us a "failed protocol"
I am sure this is a windows issue and I am just not the best with windows. Yes we had the CMD opened as admin, and everything looks good ....
I am doing some more reading myself....
Thx Josh
A quick update whats been happening. Tried to install via sdcard only to have that not mount. So went to fastboot and loaded my stock boot loader. Went back into TWRP and it could find my sdcard. Installed from the SDcard the HB BL, then installed TWRP 2.7, then install crombi-kk. I'm still doing the install, but it's working.