Guys,
i managed to throw my razr on the ground so intelligently that the gorilla glass cracked.
I have ordered a replacement front with a digitizer without the actual screen (which is working ok).
For some reason i cannot find a manual how to dismantle the front panel so i could switch the display to the new part.
do someone of you have access to the official motorola repair manual or did someone of you had to deal with a similar issue?
any advice will be appreciated.
tools and kind of skills are not an issue. i just need a know how.
lexxa said:
Guys,
i managed to throw my razr on the ground so intelligently that the gorilla glass cracked.
I have ordered a replacement front with a digitizer without the actual screen (which is working ok).
For some reason i cannot find a manual how to dismantle the front panel so i could switch the display to the new part.
do someone of you have access to the official motorola repair manual or did someone of you had to deal with a similar issue?
any advice will be appreciated.
tools and kind of skills are not an issue. i just need a know how.
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Motorola+Droid+RAZR+Teardown/7048/1
http://www.youtube.com/watch?v=78gJRP8NzRA
http://www.youtube.com/watch?v=K97mOfUiTfw
Related
Hello guys,
I need advice on whether I should dismantle my Blackstone, or should I just leave it to the pro? I want to change the housing as the current one's badly damaged but I dont want to pay big bucks for that.
As for myself, I have fair knowledge on these stuffs, as I have dismantled my previous HTC phones, ipods etc etc. However, the last time I tried to change the antenna cover of my Blackstone, I felt that it was rather difficult compared to the previous phones/devices I did. I ended up breaking the connecting latches on the old antenna cover. And I did follow the HTC Service Guide, which I think is not sufficient.
I couldn't find any video tutorials on dismantling the Blackstone. Could someone point me in the right direction please? Thanks a million
I just had to replace a damaged digitizer. i downloaded the service manual and it did help......a little! Basically, the main dissasembly was pretty straight forward, but the digitizer replacement was a nightmare!!! The LCD, Digitizer and front housing are basically fused together with an adhesive tape. Trying to remove the LCD from the digitizer was futile (broke the LCD). I had to basically replace the LCD and the Digitizer to make it all work again. The main problem with the new hardware is that you cannot get the stock replacement adhesive/tape so i had to use stuff from around the house.....i hope the diplay doesn't fall out of my phone. Anyway, got it eventualy working. Definately doable....but be careful not to touch the digitizer or LCD with your fingers.....whooops! Anyway, good luck.
swolkat said:
I just had to replace a damaged digitizer. i downloaded the service manual and it did help......a little! Basically, the main dissasembly was pretty straight forward, but the digitizer replacement was a nightmare!!! The LCD, Digitizer and front housing are basically fused together with an adhesive tape. Trying to remove the LCD from the digitizer was futile (broke the LCD). I had to basically replace the LCD and the Digitizer to make it all work again. The main problem with the new hardware is that you cannot get the stock replacement adhesive/tape so i had to use stuff from around the house.....i hope the diplay doesn't fall out of my phone. Anyway, got it eventualy working. Definately doable....but be careful not to touch the digitizer or LCD with your fingers.....whooops! Anyway, good luck.
Click to expand...
Click to collapse
Thanks.
Hmm. Or maybe the problem was only me. I find it pretty hard to dig out the antenna cover from its latches. Maybe I was digging on the wrong spot. And thats why I was reluctant to continue further. Mind sharing how you "digged" the antenna cover?
Yeah, be careful with separating the LCD from the digitizer. I recently replaced the digitizer on mine. I agree with the antenna cover, I had some troubles with mine.
I used a old sim card to help pry the antennae cover off. Because my digitizer was cracked i was able to peel it off the lcd without the the lcd. Managed to use the old adhesive tape aswell.
Check out this thread - it might help you! There you will also find a link to a video some other user made, showing how the HD can be disassembled! But - as others already have said: I wouldnt recommend disassembling the screen unit! I too managed to destroy my LCD doing so! forum.xda-developers.com/showthread.php?t=462102
Thanks alot guys. Appreciate it.
video is in my signature. Changing the antenna cover is actually really easy once you have done it ... once or twice ;-)
OliveUK said:
video is in my signature. Changing the antenna cover is actually really easy once you have done it ... once or twice ;-)
Click to expand...
Click to collapse
Hi, i also just made a couple of video - disassembly and reassembly - the inside of the HD is becoming a real star...
see
http://forum.xda-developers.com/showpost.php?p=4950742&postcount=113
So... I failed, and the glass has one crack on it that stretches from one side of the screen to the other near the bottom. Most people wouldn't mind it, and it could in fact be taken as maybe just a worse than usual scratch. I care a lot about it though, and it bugs the living sh** outta me! >:O
I was wondering if anyone could provide me with a step by step manual screen replacement tutorial, or video of some sort. I would get it fixed by some third party store, except they're charging over like $200... And I can't get warranty from Rogers since I'm a Fido customer, and because it wasn't even bought directly from Rogers. Or maybe there's some other solution to fix the screen? Like I heard of that scratch filling screen, maybe that'll do something.
Thanks for your help!
Just fyi, on the Razr the glass and display are glued together making it impossible to replace just the glass.
Here's a tear-down of the phone:
http://www.ifixit.com/Teardown/Motorola-Droid-RAZR-Teardown/7048/1
so anyone successfully replaced the LCD screen & digitizer ?
i have a cracked screen and would like to do this.
cheers.
edd32 said:
so anyone successfully replaced the LCD screen & digitizer ?
i have a cracked screen and would like to do this.
cheers.
Click to expand...
Click to collapse
Im also looking to find a way to defuse the two i have two RAZRs one with cracked glass one with cracked lcd wondering if i can make one with all the good parts and sell the other for parts but all ive heard is how to seperate the two but not how to place them together..
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.
I dropped my phone and the screen is messed up (see picture in the attachment).
3/4 of the screen purplish with horizontal lines. The top 1/4 is visible. The entire touch through the screen is working even where the screen cannot be seen. My glass seems to be fine and no damages. Someone please help! How do I fix this? Do I just need to get the LCD touchscreen + digitizer?
I was thinking about buying this and doing the replacement myself. I'm just not to sure how to do it. And do I need to buy a new glass or will I be bale to put my glass onto it? Would appreciate any advice. Thanks!
ebay.ca/itm/LCD-Touch-Screen-Digitizer-For-Samsung-Galaxy-S-2-I9100-/330744063732?pt=LH_DefaultDomain_0&hash=item4d01e1e6f4&_uhb=1#ht_2313wt_1213
kkaup said:
Do I just need to get the LCD touchscreen + digitizer?
Click to expand...
Click to collapse
Take it to a repair shop or two ask for damage level and get a quote. You will know what to replace!
You need to change screen and digitizer, its impossible to separate them.
Here samsung tech services charge 140€.
Hey all,
Unfortunately my phone dropped, it had a case (not a full one) and the glass shattered.
Screen and digitizer are working fine.
Does someone was able to only replace the glass+digitizer on this phone?
i have looked for a video/procedure but couldn't find one for the DNA. (Video anyone?)
I'm about to order the part but I am not sure if I should go for the digitizer only (50$) or for the LCD + digitizer (160$).
I have all the hand tools and the "hands" I'm just not sure if it is possible.
Disassembly
http://m.youtube.com/watch?v=z8BJVchUlTs
Assembly
http://m.youtube.com/watch?v=7St2hw_mqVQ
Thx but I already saw it. it doesn'y show how to take only the glass apart.
vemplord said:
Hey all,
Unfortunately my phone dropped, it had a case (not a full one) and the glass shattered.
Screen and digitizer are working fine.
Does someone was able to only replace the glass+digitizer on this phone?
i have looked for a video/procedure but couldn't find one for the DNA. (Video anyone?)
I'm about to order the part but I am not sure if I should go for the digitizer only (50$) or for the LCD + digitizer (160$).
I have all the hand tools and the "hands" I'm just not sure if it is possible.
Click to expand...
Click to collapse
Why not just have htc replace? They do a good job....
In my experience, No. It is VERY VERY hard to separate the LCD and the digitizer. I was not successful on my first attempt and it ended up costing me double because I had to buy an entire front section, which is pricy. If you want to take a shot at it, I still have an HTC oem digitizer thats sitting here collecting dust. PM me.
tucstwo said:
In my experience, No. It is VERY VERY hard to separate the LCD and the digitizer. I was not successful on my first attempt and it ended up costing me double because I had to buy an entire front section, which is pricy. If you want to take a shot at it, I still have an HTC oem digitizer thats sitting here collecting dust. PM me.
Click to expand...
Click to collapse
Thanks for the offer.
I decided to take it to a repair shop in Cambridge, MA,
They said they can replace the glass only for 120$.
Where did you repair it eventually? How much did you pay for entire front section?