hi guys. i'm experiencing problems with CWM mode, as a matter of fact it phone won't even boot. i installed CWM with SE Extreme Tweak Installer 1.8. now i hold volume key down when "sony ericsson" appears but it won't react to anything, as i already mentioned, it won't even start normally. i have to take out the battery every time i need to try over and over. it froze actually. i really need help please. how can i make it work again?
pizh0n said:
hi guys. i'm experiencing problems with CWM mode, as a matter of fact it phone won't even boot. i installed CWM with SE Extreme Tweak Installer 1.8. now i hold volume key down when "sony ericsson" appears but it won't react to anything, as i already mentioned, it won't even start normally. i have to take out the battery every time i need to try over and over. it froze actually. i really need help please. how can i make it work again?
Click to expand...
Click to collapse
Which phone? Which kernel are you using? And which rom? And is your bootloader unlocked.?
Sent from my GT-I9100 using xda premium
ddrichi780822
m4nz said:
Which phone? Which kernel are you using? And which rom? And is your bootloader unlocked.?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
phone is mini pro u20i. i know this is stupid but im not that much into phones so i don't know which kernel & rom i'm using. and what is bootloader. i just know that i successfully rooted my phone and installed CWM as mentioned in the first post.
pizh0n said:
phone is mini pro u20i. i know this is stupid but im not that much into phones so i don't know which kernel & rom i'm using. and what is bootloader. i just know that i successfully rooted my phone and installed CWM as mentioned in the first post.
Click to expand...
Click to collapse
on the x10mini pro you have to press the back-button repeatedly to enter cwm, not volume down. My guess is you followed instructions for the 2011 Mini Pro (without x10 name) and not the 2010 x10 Mini Pro.
SmG67 said:
on the x10mini pro you have to press the back-button repeatedly to enter cwm, not volume down. My guess is you followed instructions for the 2011 Mini Pro (without x10 name) and not the 2010 x10 Mini Pro.
Click to expand...
Click to collapse
what should i do now? my phone won't boot up. I installed first option from SE Extream Tweak "CWM For Xperia NEO/Arc/Arc-S/Play/Pro/Ray". Please help me. i don't know what to do
pizh0n said:
what should i do now? my phone won't boot up. I installed first option from SE Extream Tweak "CWM For Xperia NEO/Arc/Arc-S/Play/Pro/Ray". Please help me. i don't know what to do
Click to expand...
Click to collapse
Repair it with SEUS or PC Companion and start over...
But stop using that Tool, it's not for our phone
SmG67 said:
Repair it with SEUS or PC Companion and start over...
But stop using that Tool, it's not for our phone
Click to expand...
Click to collapse
how should i do that when phone won't even start up?
pizh0n said:
how should i do that when phone won't even start up?
Click to expand...
Click to collapse
Because the only thing you need from your phone for that is flashmode, and you can enter that always from a turned-off phone. When asked for flash-mode, just press the back-button and attach the usb-cable.. it will work.
SmG67 said:
Because the only thing you need from your phone for that is flashmode, and you can enter that always from a turned-off phone. When asked for flash-mode, just press the back-button and attach the usb-cable.. it will work.
Click to expand...
Click to collapse
downloading & installing software with SEUS. THANK YOU. but what software should i use to install compatible CWM?
pizh0n said:
downloading & installing software with SEUS. THANK YOU. but what software should i use to install compatible CWM?
Click to expand...
Click to collapse
Use flashtool (found in the development part of this forum) for most phone operations, it will install xrecovery, but you can upgrade that to CWM via a flashable zip, or you can use RecoverX app, which you can also find there.
Related
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
have u tried pressing home and back and on/off button together?
or taking out the battery cable and putting it back in?
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Skeldave said:
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Click to expand...
Click to collapse
My phone can't boot, and so i can't start adb or similar...
world2010 said:
or taking out the battery cable and putting it back in?
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
world2010 said:
have u tried pressing home and back and on/off button together?
Click to expand...
Click to collapse
Yes, but nothing...
Thank you,
dettofatto
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
shivenjuneja said:
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
dettofatto said:
My phone can't boot, and so i can't start adb or similar...
Click to expand...
Click to collapse
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Skeldave said:
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Click to expand...
Click to collapse
my phone didn't go in the update mode...
Where is the battery cable?
Sent from my E10i
dettofatto said:
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
Click to expand...
Click to collapse
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Karadenizli said:
Where is the battery cable?
Sent from my E10i
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Had the same problem
I had the same problem I took phone apart very carefully unplugged the battery cable and left it for +- 10 minutes plugged battery cable back in assembled the phone I used bin4ry console flash tool I just held down only the back button plugged usb cable in flashtool found x10i mini started flash, Don't turn on phone or anything else after re-connecting the battery just the back button and usb, green led should lite up.I don't know if this help's you must have patience after the flash it takes a while leave the phone for +- 5 minutes after flash run adb shell in console if phone seems not to respond try few times once you get shell your phone should be back to normal just be patient it all takes a while.
stuck in boot loop
Gothic-4-Schiffer said:
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Click to expand...
Click to collapse
Hi,
would it be possible to cause the phone some physical damage while flashing that would've caused the phone to be stuck in the boot loop? because I'm in the asme predicament on my mini pro. thanks
please help me..i'm stuck w/ the white sony ericsson boot logo just after i restored w/ xrecovery..im using a x10 mini pro although i can still access xrecovery..thanks in advance..
take out your sdcard use an external sd card reader and copy a new image like CM6 3.4 on it. now boot into xrecovery.
factory reset
full wipe
clear dalvik cache
install cm6 3.4
reboot
thank you so much slade87..you have saved my fone and my life for w/ your grate help..thank you very much! ^__________^
No prblem i am glad it worked :-D
Sent from my X10minipro using XDA Premium App
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
ableh.X10black said:
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
Click to expand...
Click to collapse
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
mustbiw said:
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
Click to expand...
Click to collapse
lol...how many threads are you starting for this...
As I said in the dev section thread you started.
Attach your phone to the pc and run SEUS or PC companion and follow the instructions
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
mustbiw said:
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
Click to expand...
Click to collapse
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Been through this pickle too, dont worry, go in dev forum search your generic rom, and flashtool and follow the instructions to flash the generic rom, ps, in xrecovery dont forget to make a backup of ur generic rom, saves a lot of time when things like this happen
Sent from my X10i using XDA App
gregbradley said:
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Click to expand...
Click to collapse
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
mustbiw said:
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
mustbiw said:
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
The button key is the back button, press it after you boot the phone ay the sony ericsson and yes you can flash custom roms from sd card, just be sure youre on the right baseband, if not flash it with flashtool. Have fun
Sent from my X10i using XDA App
gregbradley said:
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
Click to expand...
Click to collapse
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
mustbiw said:
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
Click to expand...
Click to collapse
Sent from my X10i using XDA App
gregbradley said:
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have done that but still I there's no phone signal... and I tray many time to enter xrecovery by pressing power + back button but it never enter the xrecovery..
what shoud I do..
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
gregbradley said:
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
mustbiw said:
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
Click to expand...
Click to collapse
gregbradley said:
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
Click to expand...
Click to collapse
I do update till complete successfully...
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
No problems...dont forget to hit thanks button
mustbiw said:
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
Click to expand...
Click to collapse
gregbradley said:
No problems...dont forget to hit thanks button
Click to expand...
Click to collapse
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
goto settings>about phone and tell me what the phone says for
android version
baseband
kernel version
mod version
i.e the last 4 things on that page
mustbiw said:
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
Click to expand...
Click to collapse
I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
I have the same problem! but I try install the rom gingerbread of nobodyall and I try no instal via xrecovery update.zip and this say me error! and I try to reboot and this turn on and freeze with the letters "sony ericsson" :S somebodyhelp us !
Sure, just need to read FAQ and post the question in proper forun section!
http://forum.xda-developers.com/showthread.php?t=840356
First post
Dramaqueens....
akorouf said:
I try to Install New Rom(GingerDX.v017(nAa+Kernel)) in Custom Kernel.
I did followed the instruction as in this http://forum.xda-developers.com/showthread.php?t=1200675
But I didn't Unlock bootloader and install Update.zip from XRecovery.
When I reboot my phone it didn't boot and Freeze on Sony Ericsson white brand.
Please Help me guys.My Phone Need Your Helps.
Sorry For my bad English.
Click to expand...
Click to collapse
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Mrakoris/ said:
Don't worry i know what to do.
First download PC companion on computer. Then install drivers on computer. After that open PC companion and click Update phone on Support zone. You will see a window witch will ask you if you want to restore your phone. When computer will be ready for restoring your device plug in your phone into computer via usb, hold home and power button until your phone turn off and quickly press and HOLD back button(if your phone is on). If it is not, just press back button and THEN plug it to computer KEEPING holding back button. After restoring you will have a new x10 mini=). Good luck.
P.S. sorry for my bad English
Click to expand...
Click to collapse
This is about unlocking the bootloader and then install custom ROM.
rooterdam said:
This is about unlocking the bootloader and then install custom ROM.
Click to expand...
Click to collapse
But the title is "break my x10 mini".
Mrakoris/ said:
But the title is "break my x10 mini".
Click to expand...
Click to collapse
Yes.
Sent from my E10i using XDA App
Wrong forum, not related to development AT ALL.
remove black rubber behind the phone and thr u can see the battery pin...unplug and plug it the phone will be switched off....now use SE pc companion and restore ur x10 mini.....
dung flash tool de dua ve rom stock. minh da tung bi nhu the nay va da lam duoc. sorry i'am Vietnamese
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
mertmr said:
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
Click to expand...
Click to collapse
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
gandhar said:
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
Click to expand...
Click to collapse
I even saw and tried that
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
mertmr said:
I even saw and tried that
Click to expand...
Click to collapse
does fastboot work?
singh_dd93 said:
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
Click to expand...
Click to collapse
I did mention that it is a mini pro in the title. Is there any other model info other than "mini pro", i dont know? I only know that it is a x10 mini pro.
I only know about back button thing, now trying the volume down key. Thanks for the tips.
gandhar said:
does fastboot work?
Click to expand...
Click to collapse
Nope, it didnt work too. I will give another shot, i guess.
--------------------
Edit: Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
mertmr said:
Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
Click to expand...
Click to collapse
this is the same computer that you used to flash the kernel right?
gandhar said:
this is the same computer that you used to flash the kernel right?
Click to expand...
Click to collapse
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
mertmr said:
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
Click to expand...
Click to collapse
yeah someone else too had a similar problem.. something about usb3.0
anyway congrats now
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Sent from my Xperia Mini using XDA
singh_dd93 said:
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Click to expand...
Click to collapse
Ok, thanks for the info. I will be carefull about that.
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
which firmware you are wrong installed. ROM or kernel.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
In flashtool...... select correct firmware and press flash button..then connect it phone and press and hold power+vol down+menu button until the green light on top flashes...then you firmware will be flashed...
Sent from my HTC One X using xda premium
nothing happens
when i use the POWER+VOL DOWN+MENU buttons....
So
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
update #2
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
ramimos said:
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
Click to expand...
Click to collapse
Use Sony Ericsson Update Service Repair function! That will work....
ramimos said:
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
Click to expand...
Click to collapse
There is no need for rooting to flash firmware using flashtool....make sure u r flashing correct firmware
Sent from my HTC One X using xda premium