Razr xt910 morto apos tentativa de atualização - Motorola Droid RAZR

Personal and much regret that I come to ask for help, I bought my RAZR xt910 and after 20 days of use the Jelly Bean tried putting it, ja made many upgrades exchanges roms on android devices, namely first sailor'm not traveling.
is as follows, I have tried upgrade to jelly bean, and the device stuck at boot, did everything right, until then there beauty downloaded the rom it stok to ics 4.0.4 and spent the RSD lite it, it was beautiful, it was returned to the . After one week he discharged. put to load and when I woke up in the morning, he was on the screen with Fastboot mesangem error at boot, system, etc. and locked cdrom device.
Oh my headache started again spent the RDS lite, to my surprise, he did not want to complete the process, was giving error checking, always kept in the boot flash or mbm_signed, etc..
I entered the ADB and went fast boot, and deleted the cache. with the command fastboot erase cache fastboot erase userdata and.
again and spent the RDS Lite and nothing. these attempts was discharging the battery, now think the **** he gave.
with the message he batery low program.
I thought I'd send in assistance until the motorola but here in my city has authorized only collection station. then it would take about 30 to 40 days to settle and look there.
So I took courage to open the back cover of the device and recharge the battery. with the battery charged.
I started doing it again trying to recuparar rom him.
and without success. Now that is the ****. then deleted all the binary files to erase his memory any residue of the old flash I made earlier without success. following files and command that it efetuei:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Delete this file even after he was connected and responding to the command fastboot
but after I despluga usb it already was. He hung up and will not turn over, nor angry with prayer. and the computer does not recognize it anymore.
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Personal'm desperate, do not know what else to do to recover the device, which a few days and bought expensive by the way.
Who can give me a force there to retrieve the device will definitely rewarding.
__________________________________________________________________
Pessoal e muito pesar que venho pedir uma ajuda, comprei meu RAZR xt910 e apos 20 dias de uso tentei colocar o Jelly bean nele, ja fiz muitas atualizações trocas de roms em aparelhos android, ou seja não sou marinheiro de primeira viajem.
é o seguinte, tentei atualizar para jelly bean, e a aparelho ficou preso no boot, fiz tudo direitinho, ate ai então beleza baixei a rom stok dele a ics 4.0.4 e passei o RSD lite nele, ficou beleza, voltou pra o que era. depois de uma semana, ele descarregou. coloquei pra carregar e quando acordei pela manha, ele estava na tela do Fastboot com a mesangem de erro no boot, system, cdrom device locked e etc.
Ai começou minha dor de cabeça, novamente passei o RDS lite, para minha surpresa, ele não queria mais concluir o processo, estava dando erro de verificação, sempre parava no flash do boot ou mbm_signed, etc.
Entrei no ADB e fui do fast boot, e apaguei os cache. com o comando fastboot erase cache e fastboot erase userdata.
e passei novamente o RDS LIte e nada. nessas tentativas a bateria foi descarregando, pense agora na merda que deu.
com a mensagem de batery low ele não programa.
Pensei em ate mandar na assistencia da motorola, mas aqui na minha cidade não tem autorizada, somente posto de coleta. então ia demorar uns 30 a 40 dias para resolverem e olhe lá.
Então tomei coragem para abrir a tampa traseira do aparelho e recarregar a bateria. com a bateria carregada.
fazendo isso comecei novamente a tentar recuparar a rom dele.
e sem sucesso. agora que vem a merda. então apaguei todos os arquivos binarios da memoria dele para apagar qualquer residuo do antigo flash que fiz anteriormente sem sucesso. segue os arquivos e comando que efetuei nele:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Apos mesmo deletar esse arquivos ele estava ligado e respondendo aos comando do fastboot
mas apos eu despluga-lo do usb ja era. ele desligou e não liga mais, nem com reza brava. e o computador não reconhece ele mais.
reconhece apenas o chip dele que o OMAP4430, e fica detectando e apos 3 segundo desconecta e volta.
Pessoal estou desesperado, não sei mais o que fazer para recuperar o aparelho, que a poucos dias comprei e caro por sinal.
quem poder me dar uma força ai para recuperar o aparelho com certeza vou recompensar.

Interesting, you cooked your first ROM but I can't find a link or I can't read.

blassom said:
Pessoal e muito pesar que venho pedir uma ajuda, comprei meu RAZR xt910 e apos 20 dias de uso tentei colocar o Jelly bean nele, ja fiz muitas atualizações trocas de roms em aparelhos android, ou seja não sou marinheiro de primeira viajem.
é o seguinte, tentei atualizar para jelly bean, e a aparelho ficou preso no boot, fiz tudo direitinho, ate ai então beleza baixei a rom stok dele a ics 4.0.4 e passei o RSD lite nele, ficou beleza, voltou pra o que era. depois de uma semana, ele descarregou. coloquei pra carregar e quando acordei pela manha, ele estava na tela do Fastboot com a mesangem de erro no boot, system, cdrom device locked e etc.
Ai começou minha dor de cabeça, novamente passei o RDS lite, para minha surpresa, ele não queria mais concluir o processo, estava dando erro de verificação, sempre parava no flash do boot ou mbm_signed, etc.
Entrei no ADB e fui do fast boot, e apaguei os cache. com o comando fastboot erase cache e fastboot erase userdata.
e passei novamente o RDS LIte e nada. nessas tentativas a bateria foi descarregando, pense agora na merda que deu.
com a mensagem de batery low ele não programa.
Pensei em ate mandar na assistencia da motorola, mas aqui na minha cidade não tem autorizada, somente posto de coleta. então ia demorar uns 30 a 40 dias para resolverem e olhe lá.
Então tomei coragem para abrir a tampa traseira do aparelho e recarregar a bateria. com a bateria carregada.
fazendo isso comecei novamente a tentar recuparar a rom dele.
e sem sucesso. agora que vem a merda. então apaguei todos os arquivos binarios da memoria dele para apagar qualquer residuo do antigo flash que fiz anteriormente sem sucesso. segue os arquivos e comando que efetuei nele:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Apos mesmo deletar esse arquivos ele estava ligado e respondendo aos comando do fastboot
mas apos eu despluga-lo do usb ja era. ele desligou e não liga mais, nem com reza brava. e o computador não reconhece ele mais.
reconhece apenas o chip dele que o OMAP4430, e fica detectando e apos 3 segundo desconecta e volta.
Pessoal estou desesperado, não sei mais o que fazer para recuperar o aparelho, que a poucos dias comprei e caro por sinal.
quem poder me dar uma força ai para recuperar o aparelho com certeza vou recompensar.
Click to expand...
Click to collapse
Do you realize that xda, specifically this section, is an international forum and english is the primary language? Talking portuguese will lead you nowhere.
You just digg your own grave when you deleted mbm.bin, mbmloader.bin, boot signed and disconnected the phone!!!
You should have reflashed at least, the boot loaders again. I think that you'll have to send it to Motorola, so they can fix with their propper tools.

p34c3m4k3r said:
Do you realize that xda, specifically this section, is an international forum and english is the primary language? Talking portuguese will lead you nowhere.
You just digg your own grave when you deleted mbm.bin, mbmloader.bin, boot signed and disconnected the phone!!!
You should have reflashed at least, the boot loaders again. I think that you'll have to send it to Motorola, so they can fix with their propper tools.
Click to expand...
Click to collapse
Personal and much regret that I come to ask for help, I bought my RAZR xt910 and after 20 days of use the Jelly Bean tried putting it, ja made many upgrades exchanges roms on android devices, namely first sailor'm not traveling.
is as follows, I have tried upgrade to jelly bean, and the device stuck at boot, did everything right, until then there beauty downloaded the rom it stok to ics 4.0.4 and spent the RSD lite it, it was beautiful, it was returned to the . After one week he discharged. put to load and when I woke up in the morning, he was on the screen with Fastboot mesangem error at boot, system, etc. and locked cdrom device.
Oh my headache started again spent the RDS lite, to my surprise, he did not want to complete the process, was giving error checking, always kept in the boot flash or mbm_signed, etc..
I entered the ADB and went fast boot, and deleted the cache. with the command fastboot erase cache fastboot erase userdata and.
again and spent the RDS Lite and nothing. these attempts was discharging the battery, now think the **** he gave.
with the message he batery low program.
I thought I'd send in assistance until the motorola but here in my city has authorized only collection station. then it would take about 30 to 40 days to settle and look there.
So I took courage to open the back cover of the device and recharge the battery. with the battery charged.
I started doing it again trying to recuparar rom him.
and without success. Now that is the ****. then deleted all the binary files to erase his memory any residue of the old flash I made earlier without success. following files and command that it efetuei:
fastboot erase boot_signed
fastboot erase cdrom_signed
fastboot erase devtree_signed
fastboot erase ebr_signed
fastboot erase mbr_signed
fastboot erase mempodroid
fastboot erase preinstall
fastboot erase recovery_signed
fastboot erase system_signed
fastboot erase logo.bin
fastboot erase mbm.bin
fastboot erase mbmloader.bin
fastboot erase cdt.bin_signed
fastboot erase radio
Delete this file even after he was connected and responding to the command fastboot
but after I despluga usb it already was. He hung up and will not turn over, nor angry with prayer. and the computer does not recognize it anymore.
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Personal'm desperate, do not know what else to do to recover the device, which a few days and bought expensive by the way.
Who can give me a force there to retrieve the device will definitely rewarding.

Haha I am sorry but the translation is hilarious
namely first sailor'm not traveling.
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::victory::victory:

romdroid. said:
Haha I am sorry but the translation is hilarious
:laugh::laugh::laugh::laugh::victory::victory:
Click to expand...
Click to collapse
Help pleaseeeeeeeeeee

Im amazed....why did u delete all partitions?
I'm not sure if your phone will ever power on without boot loader and recovery partition...
Really....why u did that?:banghead:
And BTW.....you shouldn't post this here...
Enviado desde mi XT910 usando Tapatalk 2

Honestly, arranges for technical assistance. You really ****ed your device.

Try to send it back to Motorola assistance, i did bricked and disassembled an Atrix, brought it to assistance to quote for repair, after a month they sended back repaired free of charge.

blassom said:
it recognizes only the OMAP4430 chip, and is detecting and disconnects after 3 seconds and back.
Click to expand...
Click to collapse
This sounds like OMAP ROM Code.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
image from - http://omappedia.org/wiki/Bootloader_Project
Upon boot, OMAP ROM code will search for a 1st-stage bootloader.
Probably in these location order.
1. Internal Storage (NAND Loader)
2. Serial
3. SD Card
Since you've delete your NAND loader...CPU trying the next order
(at least give you 3 second to upload a bootloader via serial)
There's a chance we can load a custom boot loader from sd-card
p/s : someday when I don't need this phone.. I'll kill it this way
If I'm lucky, I'll get to boot an unlocked bootloader.

Help, please
Then I can put files in it's original stock rom to see if you can read the boot?

whirleyes said:
This sounds like OMAP ROM Code.
Upon boot, OMAP ROM code will search for a 1st-stage bootloader.
Probably in these location order.
1. Internal Storage (NAND Loader)
2. Serial
3. SD Card
Since you've delete your NAND loader...CPU trying the next order
(at least give you 3 second to upload a bootloader via serial)
There's a chance we can load a custom boot loader from sd-card
p/s : someday when I don't need this phone.. I'll kill it this way
If I'm lucky, I'll get to boot an unlocked bootloader.
Click to expand...
Click to collapse
Thanks a lot for the schematics & the technical insight. Maybe we can try something in this case..
:good:
blassom said:
Then I can put files in it's original stock rom to see if you can read the boot?
Click to expand...
Click to collapse
Dude, let's try something...
1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.
Did you understand? / Você entendeu?

what computer you have access?? linux?? or windows?

Yes
p34c3m4k3r said:
Thanks a lot for the schematics & the technical insight. Maybe we can try something in this case..
:good:
Dude, let's try something...
1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.
Did you understand? / Você entendeu?
Click to expand...
Click to collapse
Yes ok

Windowa
whirleyes said:
what computer you have access?? linux?? or windows?
Click to expand...
Click to collapse
Windows 8

Does "Yes ok" mean it worked or just that you will try?
I got very close to the stage you are; but reflashed with factory cable instead of deleting partitions. I did not have the balls to charge the battery directly.
Sent from my XT910 using xda premium

I'll try.
doutdes said:
Does "Yes ok" mean it worked or just that you will try?
I got very close to the stage you are; but reflashed with factory cable instead of deleting partitions. I did not have the balls to charge the battery directly.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I'll try.

what was the result ?
did you succeed ?
did you fix your phone ?

Exactly the same problem.
xtam said:
what was the result ?
did you succeed ?
did you fix your phone ?
Click to expand...
Click to collapse
I believe I have the same problem although it was caused by a wrong step during installing the d-wiz rom. I own a GSM XT910 device and I formatted my main system with the boot menu manager without having copied first the ROM zip in my device (yeah i know i'm an idiot)!
Then when i rebooted I was greeted by the motorola "red eye" logo and then... nothing (no fastboot menu appears or any other menu). Nevermind how many times I have tried to reboot by pressing either "power"+"vol up"+"vol down" or just "power"+"vol up" with or without the factory cable the result is exactly the same: the boot stops after the motorola logo.
I have tried several methods as well as the aforementioned:
(1- Grab a Micro-SD with at least 4GB
2- Format it to Fat32
3- Extract & copy all the files from the 672.180.41 SBF update to it.
4- Put it into the phone
5- Remove your SIM card
6- Plug the usb cable & connect to the PC.
7- Wait to see if it loads the MBM & try to flash again, using the same files that I mentioned earlier.),
but no luck. The problem remains the same.
I have also tried this: http://forum.xda-developers.com/showthread.php?t=2198223 , but had no luck either. The device couldn't boot into fastboot.
Any other ideas?
Proud to announce that the last thread (http://forum.xda-developers.com/showthread.php?t=2198223) solved my problem after multiple times of pressing "power"+"vol up"+"vol down" en=ven after the logo appears and following the steps.

Related

[Q] Motorola Atrix TV xt682

ENGLISH VERSION
Hello friends from XDA,
Recently got the Droid X, Atrix tv model XT682 with 1 chip.
But it comes with android 2.3.7 gingerbread, being very limited.
So I looked for an update, although not official and the only update I found was for the brother Rom version of this handset with dual sim, TV XT687 Motorola Atrix.
Then realized the following:
* I downloaded all the necessary drivers to recognize the device from Motorla
* I downloaded version 6.1.4 of RSD LITE
* I downloaded the 4.0.4 ICS ROM for the link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
(I tested with the two available ITD_V2_27G_2009 and ITD_V2.27D_A10_2009)
I performed the update process by RSD Lite without problems, but after starting the phone the following occurs:
* This ROM is the XT687 which has 2 chips, it recognizes the chip 1 and even the 3g works with the rest of the ROM without problems, including the camera, but to make calls returns the error:
Mobile Network Not Available
Pictures as below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I decided to go back to his original ROM, I downloaded this same link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Tested with 3:
(ITV_151D_A09_2004_0504, ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504)
And after the process in RSD Lite shows PASS message and the machine the following error:
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Please help me to solve this problem, the device has not even been a week of use and I'm done with him without wanting wanting.
Thank you all.
=====================================================================
VERSÃO EM PORTUGUÊS - BRASIL
Olá amigos do XDA,
Obtive recentemente o aparelho da Motorola, Atrix tv modelo XT682 com 1 chip.
Porém o mesmo vem com o android 2.3.7 gingerbread, sendo muito limitado.
Então procurei por alguma atualização, mesmo que não oficial e o unico update que encontrei foi para a Rom do irmão deste aparelho na versão com dual sim, o Motorola Atrix Tv XT687.
Realizei então o seguinte procedimento:
* Baixei todos os drivers necessários para reconhecer o aparelho da motorla
* Baixei a versão 6.1.4 do RSD LITE
* Baixei a ROM 4.0.4 ICS pelo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
( sendo que testei as duas disponiveis ITD_V2_27G_2009 e ITD_V2.27D_A10_2009 )
Realizei o processo de update pelo RSD Lite sem problemas, porém após iniciar o celular ocorre o seguinte:
* Essa ROM é do XT687 que possui 2 chips, ele reconhece o chip 1 e até mesmo o 3g funciona com todo o resto da ROM sem problemas, inclusive a camera, porém ao efetuar ligações retorna o erro:
Rede Móvel Não Disponível
Conforme Imagens abaixo:
Então resolvi voltar para a ROM original dele, que baixei neste mesmo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Testei com as 3:
( ITV_151D_A09_2004_0504 , ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504 )
E após o processo no RSD Lite, mostra a mensagem PASS e no aparelho o seguinte erro:
MBM Flash-Mode.
IronMaxTV ICS
version: 01.06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Por favor me ajudem a resolver este problema, o aparelho não tem nem uma semana de uso e já acabei com ele sem querer querendo.
Obrigado a todos.
RSD Lite was ok to flash XT687 ROM on XT682 ?
You tried to reach Motorola hotline for some info about error 0201 ?
Guitwo2 said:
RSD Lite was ok to flash XT687 ROM on XT682 ?
You tried to reach Motorola hotline for some info about error 0201 ?
Click to expand...
Click to collapse
Hello,
yes, usually found in the door and the unit RSD Lite, unaware of this hotline, I searched for many forums including the motorola ma s does not find anything related to this error, just might have to access the menu FlashBoot, but I can not access simultaneously pressing the two volume buttons + and -.
===============
Olá,
sim, detectou normalmente a porta e o aparelho no RSD Lite, desconheço esta hotline, busquei por diversos forums inclusive da motorola ma snão achei nada relacionado a este erro, apenas que poderia ter que acessar o menu do flashboot, porém não consigo acessar pressionando simultaneamente os dois botões de volume + e -.
===================
romeci said:
Hello,
yes, usually found in the door and the unit RSD Lite, unaware of this hotline, I searched for many forums including the motorola ma s does not find anything related to this error, just might have to access the menu FlashBoot, but I can not access simultaneously pressing the two volume buttons + and -.
Click to expand...
Click to collapse
And volume down + cam ?
If the hardware is almost the same of XT687 (I have one), there isn't cam button. Only 3 buttons: Vol- Vol+ and power
The XT687 behaviour
FLASH MODE: Vol+ and power pressed for some seconds
You can see in device screen exactly
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Bootloader USB Init SECURE BOOT ENABLE
- XT687 Firmware vers 2_27G_2009 ( ITD_V2_27G_2009 - Stock Recovery Only )
Vol+ Vol- Power about 10 secs
Does not have FASTBOOT
- XT687 Firmware vers 2_27D_2009 ( ITD_V2.27D_A10_2009 - FASTBOOT embedded )
You can boot Stock Recovery pressing Vol+ Vol- Power until you see Motorola Logo
If you continue pressing you will see a protect menu that you can not do anything and after goes to another screen: FTM MODE with IMEI informations.
Unfortunately Motorola Android Sooner Single Adb Interface driver is not loaded
This menu suggests FASTBOOT. Actually you can boot enox's CWM for Motoluxe XT615 like follow:
Your device must be ON (regular use)
adb reboot-bootloader
fastboot boot recovery.img
In this case you can see for a small time M. Sooner Single until booting CWM
Conclusion:
I believe you can boot Motoluxe CWM in XT682 If you flashed XT687 ROM 2_27D_2009 (ITD_V2.27D_A10_2009) because the hardware is almost the same and I can boot it in my XT687.
can somebody help me please? i used xt827 sbf with xt826. now i lost my imei, but i have the imei number. there's anyway to restore my it? (it's not my phone D: i'm feeling like crap right now)
thank you guys!
You can fix?
Junior voce conseguiu arrumar o XT682??? Estou com o mesmo problema com o meu..instalei da x=versao do XT687
romeci said:
ENGLISH VERSION
Hello friends from XDA,
Recently got the Droid X, Atrix tv model XT682 with 1 chip.
But it comes with android 2.3.7 gingerbread, being very limited.
So I looked for an update, although not official and the only update I found was for the brother Rom version of this handset with dual sim, TV XT687 Motorola Atrix.
Then realized the following:
* I downloaded all the necessary drivers to recognize the device from Motorla
* I downloaded version 6.1.4 of RSD LITE
* I downloaded the 4.0.4 ICS ROM for the link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
(I tested with the two available ITD_V2_27G_2009 and ITD_V2.27D_A10_2009)
I performed the update process by RSD Lite without problems, but after starting the phone the following occurs:
* This ROM is the XT687 which has 2 chips, it recognizes the chip 1 and even the 3g works with the rest of the ROM without problems, including the camera, but to make calls returns the error:
Mobile Network Not Available
Pictures as below:
So I decided to go back to his original ROM, I downloaded this same link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Tested with 3:
(ITV_151D_A09_2004_0504, ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504)
And after the process in RSD Lite shows PASS message and the machine the following error:
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Please help me to solve this problem, the device has not even been a week of use and I'm done with him without wanting wanting.
Thank you all.
=====================================================================
VERSÃO EM PORTUGUÊS - BRASIL
Olá amigos do XDA,
Obtive recentemente o aparelho da Motorola, Atrix tv modelo XT682 com 1 chip.
Porém o mesmo vem com o android 2.3.7 gingerbread, sendo muito limitado.
Então procurei por alguma atualização, mesmo que não oficial e o unico update que encontrei foi para a Rom do irmão deste aparelho na versão com dual sim, o Motorola Atrix Tv XT687.
Realizei então o seguinte procedimento:
* Baixei todos os drivers necessários para reconhecer o aparelho da motorla
* Baixei a versão 6.1.4 do RSD LITE
* Baixei a ROM 4.0.4 ICS pelo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
( sendo que testei as duas disponiveis ITD_V2_27G_2009 e ITD_V2.27D_A10_2009 )
Realizei o processo de update pelo RSD Lite sem problemas, porém após iniciar o celular ocorre o seguinte:
* Essa ROM é do XT687 que possui 2 chips, ele reconhece o chip 1 e até mesmo o 3g funciona com todo o resto da ROM sem problemas, inclusive a camera, porém ao efetuar ligações retorna o erro:
Rede Móvel Não Disponível
Conforme Imagens abaixo:
Então resolvi voltar para a ROM original dele, que baixei neste mesmo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Testei com as 3:
( ITV_151D_A09_2004_0504 , ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504 )
E após o processo no RSD Lite, mostra a mensagem PASS e no aparelho o seguinte erro:
MBM Flash-Mode.
IronMaxTV ICS
version: 01.06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Por favor me ajudem a resolver este problema, o aparelho não tem nem uma semana de uso e já acabei com ele sem querer querendo.
Obrigado a todos.
Click to expand...
Click to collapse

FIRMWARE Original PPKS29.68-16-21-5 XT1941-3 RETBR

FIRMWARE Original PPKS29.68-16-21-5 XT1941-3 RETBR
DOWNLOAD
ADB commands
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Mega will not let you download files bigger than 500mb if you do not have an account.
Fala amigo, te falar, instalei tudo certinho nao deu erro no rsd lite, porem nao inicia Startup-Failed
Notei esta MSG: SSM: Boot image roll back 5,6 como se estivesse fazendo um downgrade, porem esta versao que voce postou é a ultima.
Voce tem alguma ideia disto ?
Solução Startup Failed
Blz aconteceu comigo no moto g5s. E consegui resolver, você tem que baixar o fastboot edl. Extrai e coloca na pasta adb junto com a rom. Coloca no momento fastboot e clica em Reboot. Aí roda o fastboot
jefflima1 said:
Fala amigo, te falar, instalei tudo certinho nao deu erro no rsd lite, porem nao inicia Startup-Failed
Notei esta MSG: SSM: Boot image roll back 5,6 como se estivesse fazendo um downgrade, porem esta versao que voce postou é a ultima.
Voce tem alguma ideia disto ?
Click to expand...
Click to collapse
Eu tenho aqui o fastboot edl, coloco dentro da pasta da ROM, starto o edl.cmd e inicio a atualização pelo RSD ou pode ser no próprio cmd ?
Estranho de mais, ainda não peguei este tipo de erro.
---------- Post added at 08:19 PM ---------- Previous post was at 08:01 PM ----------
rbragars said:
Blz aconteceu comigo no moto g5s. E consegui resolver, você tem que baixar o fastboot edl. Extrai e coloca na pasta adb junto com a rom. Coloca no momento fastboot e clica em Reboot. Aí roda o fastboot
Click to expand...
Click to collapse
É amigão, deu certo não, cliquei la no modo edl, reiniciou startei, porem o erro persiste, edl mode acredito que seja para colocar em modo qualcom, tipo os xiaomi em edl mode,
enfim, tentei no RSD e via linha de comando, e nenhum dos 2 deu certo, ele completa a ROM, reinicia aparece MOTO ONE, ai desliga novamente e já volta na tela de fastboot informando
SSM: Boot image roll back: 5,6
Failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
boot up failed
Des de já agradeço a atenção de todos...
Obrigado
Deu certo?
Blz viu os dois tutorial?
jefflima1 said:
Fala amigo, te falar, instalei tudo certinho nao deu erro no rsd lite, porem nao inicia Startup-Failed
Notei esta MSG: SSM: Boot image roll back 5,6 como se estivesse fazendo um downgrade, porem esta versao que voce postou é a ultima.
Voce tem alguma ideia disto ?
Click to expand...
Click to collapse
Hello,
anyone got the XT1941-4 RETEU PPKS29.68-16-21-5 ?
thanks.
Aureal2 said:
Hello,
anyone got the XT1941-4 RETEU PPKS29.68-16-21-5 ?
thanks.
Click to expand...
Click to collapse
Go to mirrorlolinet and go find it
borksek said:
Go to mirrorlolinet and go find it
Click to expand...
Click to collapse
hello, I can't find for my model (XT1941-4 RETEU).
Aureal2 said:
hello, I can't find for my model (XT1941-4 RETEU).
Click to expand...
Click to collapse
You didn't even search then. Litsen. I took my time to get it since your too lazy. https://mirrors.lolinet.com/firmware/moto/deen/official/RETEU/
borksek said:
You didn't even search then. Litsen. I took my time to get it since your too lazy. https://mirrors.lolinet.com/firmware/moto/deen/official/RETEU/
Click to expand...
Click to collapse
I'm not lazy my friend
in lolinet there is no version I'm looking for: PPKS29.68-16-21-5
bye.
Aureal2 said:
I'm not lazy my friend
in lolinet there is no version I'm looking for: PPKS29.68-16-21-5
bye.
Click to expand...
Click to collapse
It's old. Update.
thanks for your help
so, the last is this: XT1941-4_DEEN_RETEU_9.0_PPK29.68-16-34_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I unpacked this zip and I see compilation date: feb-19 when the OP ROM (my same version) has mar-19. It's a problem or it doesn't mean nothing?
bye.
Aureal2 said:
thanks for your help
so, the last is this: XT1941-4_DEEN_RETEU_9.0_PPK29.68-16-34_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I unpacked this zip and I see compilation date: feb-19 when the OP ROM (my same version) has mar-19. It's a problem or it doesn't mean nothing?
bye.
Click to expand...
Click to collapse
That's not the newest version, it's a corrupted version. No security update no nothing. It's bootable and works good. Only problem is old security update and no updates.
borksek said:
That's not the newest version, it's a corrupted version. No security update no nothing. It's bootable and works good. Only problem is old security update and no updates.
Click to expand...
Click to collapse
thank you borksek.
do you have some advice for ROM to flash or I have simply to wait new upload?
Aureal2 said:
thank you borksek.
do you have some advice for ROM to flash or I have simply to wait new upload?
Click to expand...
Click to collapse
If you know how to take logs and actually test frequently I'll add you to our telegram group for testing.
borksek said:
If you know how to take logs and actually test frequently I'll add you to our telegram group for testing.
Click to expand...
Click to collapse
mmm.. maybe later
for now I need to stick with a official ROM.
There is something not corrupted in lolinet or not?
thanks!
Aureal2 said:
mmm.. maybe later
for now I need to stick with a official ROM.
There is something not corrupted in lolinet or not?
thanks!
Click to expand...
Click to collapse
Yes, every zip except that one I think.
borksek said:
Yes, every zip except that one I think.
Click to expand...
Click to collapse
if I flash a ROM with a previous security patch would I have problems? (I read something in other thread)
or it's only related to downgrade (from Android 9 to 8.1 for example)..
big thanks for your help!

Zenfone 4 ZE554KL - PROBLEM

Hey guys, i really need some help.
My Zenfone 4 ZE554KL, yesterday he sudendly shut down and doenst start anymore, when i turn him on he start in a bootloop, and he stays in there forever, i cant enter recovery mode either, he just bootloops, what can i do? I need my phone, :´/
Pessoal, preciso de ajuda.
Meu Zenfone 4 ZE554KL, ontem ele desligou derrepente e não quer mais ligar, quando eu tento ligar ele, ele simplesmente entra em um bootloop e fica la pra sempre, e também não consigo entrar no modo recovery, alguém me ajuda, preciso do meu celular, :´/
Tries to put into download mode and reinstalls the system..
Tenta colocar em modo de download e reinstala o sistema
It's my problem too.
ZE554kl, no unlock bootloader "CSC FASTBOOT MODE", no recovery mode...
i don't remember which version is installed, but i think is WW-16.0620.1912.23
How can i put in download mode in this model?
I have the same problem...
Someone knows a solution ?
I got a phone with this same problem too. One possible solution I looked for is flashing a raw stock rom from csc fastboot mode, but it didn't work in my device. Here's the link in case it works for any of you:
https://www.getdroidtips.com/asus-zenfone-4-stock-firmware/

I reflashed the Stock ROM (ZUI 10.5) without wiping anything and now I'm stuck

I also accidently checke "Erase All before download".
Now SIM cards aren't recognized and WiFi isn't working properly. I can't go back to Global ROM, I can't update to ZUI 11.1 and unable to find a way to install TWRP and wipe cash and Dalvik. I tried another reflash an nothing changed.
Help! Please!
Global ROM is a manually modified rom made from the sellers, and so it's not available to the public.
In regards of the erased IMEI do you have a backup of the efs folder? If not i would contact the seller to try and organize a repair, unfortunately we can't talk about changing IMEI here, because its illegal in many states.
You can try to search on 4pda for possible methods, it should be the same for all snapdragon models, just be sure to have the original box with the imeis written in it
Ricky0178 said:
Global ROM is a manually modified rom made from the sellers, and so it's not available to the public.
In regards of the erased IMEI do you have a backup of the efs folder? If not i would contact the seller to try and organize a repair, unfortunately we can't talk about changing IMEI here, because its illegal in many states.
You can try to search on 4pda for possible methods, it should be the same for all snapdragon models, just be sure to have the original box with the imeis written in it
Click to expand...
Click to collapse
I don't have any backup, and I have my IMEI and everything in the box. Now I just need the QCN file of any Lenovo Z5 Pro GT, and I'll be able to recover everything.
If you have Lenovo Z5 Pro GT, you can export the QCN file usin QFIL, change your IMEI infos (so you have nothing to worry about) and then upload it for me, and you will save me, and I will be thankful to you for the rest of my life.
I have same problem [emoji58]
please help me to fix it...
Sent from my Pixel 2 XL using Tapatalk
Olá, sou do Brazil. Eu acho que tenho a solução para seu problema, coloque o celular em modo fastboot, pegue os arquivos da pasta da ROM 10.5.340 > persist.img e vbmeta.img e coloque na pasta do ad minimal fast boot, abra o programa e digiten esses comandos:
Fastboot devices - para identificar o aparelho
Depois
Fastboot flash persist persist.img
E depois
Fastboot flash vbmeta vbmeta.img
Depois reinicie o aparelho. Pronto, problema resolvido.
LucasSilva25 said:
Olá, sou do Brazil. Eu acho que tenho a solução para seu problema, coloque o celular em modo fastboot, pegue os arquivos da pasta da ROM 10.5.340 > persist.img e vbmeta.img e coloque na pasta do ad minimal fast boot, abra o programa e digiten esses comandos:
Fastboot devices - para identificar o aparelho
Depois
Fastboot flash persist persist.img
E depois
Fastboot flash vbmeta vbmeta.img
Depois reinicie o aparelho. Pronto, problema resolvido.
Click to expand...
Click to collapse
English??
LucasSilva25 said:
Olá, sou do Brazil. Eu acho que tenho a solução para seu problema, coloque o celular em modo fastboot, pegue os arquivos da pasta da ROM 10.5.340 > persist.img e vbmeta.img e coloque na pasta do ad minimal fast boot, abra o programa e digiten esses comandos:
Fastboot devices - para identificar o aparelho
Depois
Fastboot flash persist persist.img
E depois
Fastboot flash vbmeta vbmeta.img
Depois reinicie o aparelho. Pronto, problema resolvido.
Click to expand...
Click to collapse
I tried your solution
only wifi works
sim not works
hey mate i have the same problem that you have, maybe we can help eachother? i have the qcn the file that we need, i just dont know how to fix it, how to rewrite my imeis to the qcn, do you know how?

I (soft?) bricked my phone (Moto G8 Power XT2041-3) What can I do?

Hi!
Today I unlocked bootloader and tried to root the phone. After flashing Magisk patched boot.img phone did boot but touch screen did not work. Me being silly, tried different things and right now phone doesn't boot. I can still get to bootloader and recovery. Is there any way for me to flash full stock rom to fix that?
I know I was stupid.
Hoping that somebody can help me,
mectax
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Thank you very much, I'll give this a try tomorrow!
EDIT: PROBLEM SOLVED - Used Lenovo's Rescue and Smart Assistant
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Will this rescue a hard bricked device??
If the touchscreen didn't work then that usually means you flashed a different version of the kernel / signed differently. If you can get the stock boot.img and flash it...it should recover itself also.
Adge40 said:
Will this rescue a hard bricked device??
Click to expand...
Click to collapse
Any info on this please?
darko454 said:
Any info on this please?
Click to expand...
Click to collapse
Hard bricked as in no bootloader or can you get to the bootloader. If you can't get to the bootloader does a computer recognize anything in the device manager when its plugged in?
I was having issue with google services on my new phone that i got from Amazon. So I did factory reset few times but still having issue so i thought flashig might help and i used Mototola tool Rescue and smart assistant and found correct version of moto g8 power lite XT2055-2. But after flashing my phone just hard brick. No power on, not going to recover model, don't charge when plgged in and don't even recognised by laptop when i plug in. The only thing i can see when plug into laptop or power source is red tiny light whic you normally get while charging. other wise phone is dead. I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Can somebody please help. I did eevn used for a single day. I bought it open box like new.
coolarun1980 said:
Eu estava tendo problemas com os serviços do Google no meu novo telefone que recebi da Amazon. Então, eu fiz a redefinição de fábrica algumas vezes, mas ainda com problemas, então pensei que o flashig poderia ajudar e usei a ferramenta Mototola Rescue e o assistente inteligente e encontrei a versão correta do moto g8 power lite XT2055-2. Mas depois de piscar meu telefone apenas tijolo duro. Não liga, não vai recuperar o modelo, não carrega quando conectado e nem é reconhecido pelo laptop quando eu conecto. A única coisa que posso ver quando conecto o laptop ou a fonte de alimentação é uma pequena luz vermelha que você normalmente obter durante o carregamento. outro telefone sábio está morto. Eu tentei a ferramenta flash SP, mas recebi um erro assim que cliquei em download. E o erro é;
ERRO: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Alguém pode por favor ajudar. Eu eevn usado por um único dia. Comprei caixa aberta como nova.
Click to expand...
Click to collapse
OLÁ AMIGO ESTOU COM O MESMO PROBLEMA MEU APARELHO É O MOTO G8 POWER NAO CONSIGO ENTRAR NO BOOTLOADER NAO CARREGA QUANDO CONECTADO NO CARREGADOR NEM O PC RECONHECE ELE NAO LIGA, VOCE CONSEGUIU RESOLVER OU ALGUEM PODE ME AJUDAR?

Categories

Resources