Related
H9500+ = ZP900 : 1GB RAM 8MP Rear Camera
H9300+ = ZP900S : 512MB RAM 5MP Rear Camera
HDC Galaxy Note 2 : 512MB RAM 8MP Rear Camera (I don't sure about this model)
There's 2 way to install ROMS for these models
1. Flashtool 4.0 : for install with scattered rom files : use for install CWM Recovery or partition modifying patch - it's hard for the first time installation because Driver installation. please be patient
2. CWM Recovery : for install with zip rom file : after install CWM Recovery, i usually use this way for installation
INSTALLATION TOOLS
USB drivers zopo - mediafire.com/?l88i78kesvp4b49
Flashtool4 - mediafire.com/?sf2dk21sm1a1a4g
CWM Recovery - mediafire.com/?9xr03iagvb07vcb
2.5GB data partition.7z - https://dl.dropbox.com/u/11743546/2.5GB data partition.7z - Install with flashtool 4.0 for increase /data partition to 2.5GB app space! & CWM Recovery Included
INSTRUCTIONS by darevix
- First it is advisable to backup your data applications with Titanium Backup or Rom Toolbox.
- You must have ClockworkMod Recovery installed, instructions below.
- Copy the ROM to the root of the SD card.
- Boot into CWM recovery mode. A simple method is to restart the phone by holding the button "volume up" down.
- Although not required, I recommend making a backup of your current ROM in case things go wrong. (Backup and restore> backup) will take a few minutes.
- Do a "wipe data / factory reset"
- Install the rom with the option: Install zip from sdcard> choose zip from sdcard> zom name. Zip
- Reboot and wait.
INSTALL ClockworkMod recovery by darevix
1 - Download:
USB drivers zopo - mediafire.com/?l88i78kesvp4b49
Flashtool4 - mediafire.com/?sf2dk21sm1a1a4g
CWM Recovery - mediafire.com/?9xr03iagvb07vcb
We took 2nd phone battery and put it back on.
3 - FlashTool execute, open the file downloaded scatter of recovery before and give the download button. We display a message indicating that not all files have been loaded. We will give the button if we want to continue.
4 - With battery and mobile tucked off connect the phone to the PC via the USB cable. Windows will detect a new device. When applying for a driver to choose the previously downloaded our version of Windows.
5 If we get an error FlashTool to overcome the waiting time, we repeat the steps 2,3 and 4 with the driver already installed.
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
HyperEscape said:
Thank you so much. After some hit and trial I was able to flash the ROM. Actually it installs two VCOM (usb2ser) drivers which are to be configured before the flashtool actually recognizes the phone virtual COM port. But it actually needs flash tool to be installed properly. So for any newbie, based on my experience the following should be the path followed. I have installed USBLogView http://www.nirsoft.net/utils/usb_log_view.html to watch and monitor which USB device are installed. I am using Windows XP-32 bit but he procedure should remain mainly similar for Windows 7 as well.
1. First turn off the phone, pull out the battery. Keep the microUSB cable connected to you PC, but dont connect the phone to it as yet.
2. Download the intended ROM files,for me it was the modded ZOPO ROM (downloaded from the earlier posts in the same thread) for ZP900. it is a RAR/ZIP file which you have to unRAR in any folder, make sure the folder name is short and preferably should not contain spaces. I created a folder in my D drive called D:\ZP900\ZP900 ( i will be posting my sample files). When unzipped it will extract many files which you have to correctly assign with the relevant path in the flashtool to work properly
3. When you unRAR the Flashtool (downloaded from earlier posts in this thread) folder there is a subfolder called Android (in which you have an Android.INI, this file ) . Do the process mentioned in the screenshot to edit your Android.ini file properly.
4. Run the flash tool , select your correct scatter file which will be found in the ROM unzipped folder, for me the file name is "MT6577_Android_scatter_emmc.txt" which came with the ZOPO ROM (downloaded from the earlier posts in the same thread) for ZP900. This scatter file contains the memory addresses which are to be rewritten in the phone ROM with the correct type of images (found in the unzipped ROM directory). It is different for every mobile architecture , in our case it is the correct one for MTK6577 (which is the ZOPO/Hero 9500). Once you select scatter file the file locations for various image types would be automatically files from the android.ini file which we edited in the last step. Now open the Windows device manager to see what USB device gets in installed. Also open the USBLogview to see what is plugged in and out (just if you like to do so). Follow the steps in the next screen shot to attach the phone for the first time , it will show an unidentified MTKxxxx_preloader VCOM.
5. When it does select the install driver manually option and choose the USB drivers (as downloaded from the earlier post and unzipped in a separate folder) it will install the first VCOM port as seen in USBLogview. It is the behaviour of this port to keep plugging/unplugging itself . So you have to grab the right moment in device manager to click the device and open its properties window to supply the driver yourself.
After that what I did was to remove the phone, insert the battery, keep it switched off. Exit the flashtool, re-run it again to repeat the procedure in step number 4 till the end, and then reconnect the phone (this time with battery and turned OFF), this time it will detect another unknown VCOM device, as earlier supply the same driver as you have downloaded from the same location as you did previously, but this time it will install a slightly differently named VCOM device and it will stay in device manager after the installation, unlike the first device which keeps flashing in/out. Check out the screen shot.
Once this second device is correctly installed the firmware flashing begins itself, when the flashtool bar turns red/purple, then yellow and finally you will be shown the green circle with OK prompt.
Hopefully if you did it right, you have flashed your Hero H9500+ (mine with 1G RAM) with the ZOPO ZP900 ROM. After a lot of frustration at last this was the way which worked for me of course with the guidance from the posters.
Happy flashing and say thanks if it helped you.
Click to expand...
Click to collapse
ZOPO STOCK ROM
zopomobile.com/xiazai.php
Originally Posted by Kyrie1965
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC : http://kuai.xunlei.com/d/DDOCSMPRUGGL
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC : http://kuai.xunlei.com/d/DSFPWQMUVYFT
MOD based on ZP900_20120829-113139_PC: ZP900_20120829-113139_PC_MOD
http://narod.ru/disk/60395664001.84...0_ZWX_ICS_20120829-113139_LXL_PC_MOD.rar.html
MOD based on ZP900S_20120831-104539_PC: ZP900S_20120831-104539_PC_MOD
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
HDC Galaxy Note ROM by Cristallx
http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
H9300/ZP900S ROM
http://narod.ru/disk/60864110001.e0...58_ZP900S_ZWX_ICS_HW_20120831-104539.rar.html
H9500/ZP900 ROM
http://www.4shared.com/rar/yo6LqGpG/MP_MT77_root_en_play_zp900s_zw.html
ZP900S Stock ROM from Mawe79
http://www.movilesdualsim.com/foro/...CS-4-0-4-para-ZP900-y-clonicos-de-1GB-y-512MB
darevix's DRX ROM
i'm using this rom
http://bbs.lewaos.com/download.php?rom=release
Lewa OS ROM
"everything works. Chinese folks will be very happy since it is primarily made with Chinese as the default language. You can select english but it is not very accurate and you will see many grammatical and syntax error. Chinese does creep in some of the applications which makes it difficult to use them. however the rom is super smooth without any glitches"
commented by vijayar
How to Install
Download the correct zip file
Search and install 7-zip & Notepad++ via google on your PC.
Open Lewa ROM with 7-zip but don't extract it.
Drag & drop out META-INF\com\google\android\updater-script to ur PC desktop
Open it with Notepad++ & delete the first 2 lines & save it.
Drag & drop it back to open lewa ROM in 7-zip
Save and close
Flash this modified zip via CWMR
zp900s 20121029 rom from russian forum
recommended by ilut74
http://forum.china-iphone.ru/viewtopic.php?f=85&t=22830
Where did you found the rom??
If you find one compatible rom please tell us
Iheings vow
dskhas said:
Where did you found the rom??
If you find one compatible rom please tell us
Click to expand...
Click to collapse
i didn't found the other rom
so i search the zopo mobileshop's blog that guide the way to flash recovery to CWM recovery and you can root with it
but before that i've just flash wrong boot.img (ZP900) so the camera can't be used
if you ask about zp900's rom you can find it here
http://www.zopomobileshop.com/en/content/9-download-zopo-mobile-latest-rom
PLEASE HELP ME ABOUT BOOT.IMG PLEASE!!
Stock ROM for "OEM ZOPO 900" (9300+, H9500, H9500+, etc. with 512 MB RAM and 5 MP sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Kyrie1965 said:
Stock ROM for "OEM ZOPO 900" (9300+, H9500, H9500+, etc. with 512 MB RAM and 5 MP sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Click to expand...
Click to collapse
is there because the camera bug fixed? So runs the back camera ? I had a Mod. Zopo 900 Rom , also with 512 mb , but non working back Cam
edt. self tested all works well , cam works also
@xenoxc
I have backups from the Real Hero 9300 + firmware, but must be restored with the Chinese cwm
which cwm you got?
And i also have a Custom Rom , from Taiwan 101 This is the best for me at the Moment , since it is already rooted,
and otherwise very good runs.:good:
I Upload that all , but Takes a while .
Greets
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
kyrie1965 said:
stock rom for "oem zopo 900" (9300+, h9500, h9500+, etc. With 512 mb ram and 5 mp sensor) 15.08.2012: http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html
Click to expand...
Click to collapse
great!! Thanks!!
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
So will this ROM and rooting method also work on original ZOPO ZP900 Leader. I am planning to buy one, however I am reading in the thread that this ROM is limited to 512MB RAM, where the original ZOPO has 1GB RAM (opposed to the replica Hero i9300+ with 512MB). So if I root and flash this ROM , will I be limited to use the 512RAM only and would be enjoying the enhanced speed and performance difference there would be in a original ZOPO ZP900.
Also need your advice whether to go for the original ZOPO ZP900 or the Hero i9300+, since you guys already seem to have em. Can you please recommend based on the following areas. It is ok if the Hero is reasonably good enough and fast , i don't think I would then go for a ZOPO.
1. Speed and performance, any huge difference.? 1GB RAM v/s 512MB RAM.
2. Screen quality qHD , any noticeable difference in sharpness, colour clarity and visual aesthetics. I read that the original ZOPO has Corning Gorilla Glass. Any differce in the resolution b/w the ZOPO and Hero, does the qHD really feels good enough on Hero.
3. Overall build quality, plastic body smooth or thin and cheap.
4. Any sensors missing in the Hero ? Accelerometer, Compass, Gyroscope, GPS, Proximity , Light.
5. Battery timings and results (provided that there are two batteries shipped with the Hero 9300+).
6. Any other areas you feel are important to make a decision to spend the extra money on the original ZOPO.
Would be a great resource for anyone planning to buy but confused in making the decision.
Thanks for your replies so I can finalize my decision.
1. Speed and performance, any huge difference.? 1GB RAM v/s 512MB RAM.
FOR ME I've played with other model the 512MB & 1GB RAM difference is not much, it's increased smoothness but a little
2. Screen quality qHD , any noticeable difference in sharpness, colour clarity and visual aesthetics. I read that the original ZOPO has Corning Gorilla Glass. Any differce in the resolution b/w the ZOPO and Hero, does the qHD really feels good enough on Hero.
qHD is noticeable difference for me, it's sharp and good color but i didn't thinks it's gorilla glass for Hero H9300+, unknown for ZP900
3. Overall build quality, plastic body smooth or thin and cheap.
build quality is fine, not look very cheap
4. Any sensors missing in the Hero ? Accelerometer, Compass, Gyroscope, GPS, Proximity , Light.
there's all sensor except gyroscope
5. Battery timings and results (provided that there are two batteries shipped with the Hero 9300+).
it's fine stand by more than 1-2 days if you don't play it too much
6. Any other areas you feel are important to make a decision to spend the extra money on the original ZOPO.
no need for me Hero H9300+ is good for me
Thanks xenoxc,
I just ordered a H9500 (9300+) from Aliexpress. This is the same with 1GB of RAM, so hopefully would be equal to original zopo.
Can I use all theses mods mentioned in the thread on this mobile and would still get all the RAM and front/back camera working.
plus is there a mod or a kernel for this phone which enables BLN.
Thanks for your replies.
Sent from my GT-I9100 using xda premium
HyperEscape said:
Thanks xenoxc,
I just ordered a H9500 (9300+) from Aliexpress. This is the same with 1GB of RAM, so hopefully would be equal to original zopo.
Can I use all theses mods mentioned in the thread on this mobile and would still get all the RAM and front/back camera working.
plus is there a mod or a kernel for this phone which enables BLN.
Thanks for your replies.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've tried to search in aliexpress but i can't find the 1G RAM with 5MP camera model
can you send me the link?
about the rom, i used to flash the H9300+ with ZP900 the only bug is the Camera so i think that RAM isn't the problem
This is my first chinese phone, I don't recive yet, I have rooted other phone and tablets but I have many dudes
Before install a mod CWM I need to root the phone??
Is possible to do a backup of original firmware before flashing any thing??
There are some tutorial or guide to flash??
Thanks for advence
dskhas said:
This is my first chinese phone, I don't recive yet, I have rooted other phone and tablets but I have many dudes
Before install a mod CWM I need to root the phone??
Is possible to do a backup of original firmware before flashing any thing??
There are some tutorial or guide to flash??
Thanks for advence
Click to expand...
Click to collapse
you can install CWM recovery before root
you can backup original firmware but after you install CWM you can't backup the original recovery
xenoxc said:
i've tried to search in aliexpress but i can't find the 1G RAM with 5MP camera model
can you send me the link?
about the rom, i used to flash the H9300+ with ZP900 the only bug is the Camera so i think that RAM isn't the problem
Click to expand...
Click to collapse
I have purchased from the following link :
http://www.aliexpress.com/item/Hero-H9500-5-3-QHD-960-540-1GHz-dual-core-android-4-0-3G-tablet-phone/630619479.html
Will get in touch with you for further modding with custom ROM and recovery once I receive the mobile.
Thanks.
dynamo4ever said:
will make edt. in 1-2 hours , the form will be better
1st of all the flashtool : http://d01.megashares.com/dl/3zCOrTe/Flashtool_4.0.rar
here is the CWM from taiwan101 for the 9300+: http://d01.megashares.com/dl/KicT315/Taiwan101_CWM_Recovery.rar thx for nice work
here is my moded stockrom ( root ) for the 9300+ : http://d01.megashares.com/dl/bX4QEh8/Heo 9300+ stock root.rar
here is the share folder from jonny hung for taiwan101 rom for 9300+ : http://www.4shared.com/folder/rwLGnosD/Hero-9300.html thx for nice work
here is my smaller release from jonny hungs rom ( root chinesse an trash apps deleted ) for 9300+ : comming soon
here another working Rom , Zopo 900 MoD for 9300+ from russia : http://narod.ru/disk/60451899001.01...958_9300+_zwx_ics_sw_20120815-163917.rar.html Kyrie1965 thx for nice work
this i have tested and work stable
the standart zopo firmware works ,but without backcam camera is not the same hardware
see you later
Click to expand...
Click to collapse
How can I use the 'moded stockroom ( root ) for the 9300+ '?
I've already downloaded it..
thanks...
and also, can you also give me a scatter file for 9300+ ?
thanks again..
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC
MOD based on ZP900_20120829-113139_PC: ZP900_20120829-113139_PC_MOD
MOD based on ZP900S_20120831-104539_PC: ZP900S_20120831-104539_PC_MOD
MOD:
- CWM Recovery included
- rooted (su, Superuser.apk, RootExplorer.apk)
- DATA (for apps) partition size increased to 1 GB (512 MB in stock)
- removed all Chinese software
- default language is English
Kyrie1965 said:
Latest stock ZOPO 900 (WOHTC G36, etc., any with 1 GB RAM) ROM 29.08.2012: ZP900_20120829-113139_PC
Latest stock ZOPO 900S (9300+, H9500, H9500S, etc., any with 512 MB RAM) ROM 31.08.2012: ZP900S_20120831-104539_PC
Click to expand...
Click to collapse
can you please upload those stock roms to different file hosting sites?
coz that host there is really slow..
Thank you
Hi everybody!
I want to buy this phone, but, what you guys think about it?
It's a good phone for web-browsing? (which will be the main use of the phone)
hi guys
i'm very interested of buying the 9300+ model with the 512 mb ram.
can i add an hebrew language (full system support) on it? the 4.1.1 JB comes without hebrew when you buy it...
thanks for your help!
no mobile of these have 4.1 (JB), chinese only modified build.prop, but it is not really jelly bean... we should try to port jb.. who agrees?
Hi all,
this forum is amazing thank you for all the help that all are giving to the communities!
Im trying to figure out if i can create a custom android rom or i can use a cynogen rom for a friend's chinese phone. On the box or in the phone there are no link to the manufacturer web site the only info that i have are this one the i took from the seller site:
Code:
Brand N/A
Model C110
Color White
Type Brand New
Form Factor Barphone
Operating System Android 2.3
Keyboard Touch Screen
Language Bahasa Indonesia, Bahasa Malaysia, German, English, Spanish, French, Italian, Portuguese, Vietnamese, Turkish, Russian, Arabic, Thai, Simplified Chinese, Traditional Chinese
Networking GSM
Frequency GSM 850/900/1800/1900 MHz
Data Transfer GPRS
SIM Type Ordinary SIM
SIM Slot 2
Network Standby Dual Network Standby
Network Conversation One-Party Conversation Only
Wi-Fi Yes
GPS Yes
Processor MTK 6513 650MHz
RAM 256MB
ROM 512MB
Available Memory 114MB
Memory Card Supports Micro SD / TF card up to 32GB in size (not included)
Screen Size 3.5 Inch
Touch Screen Capacitive
Resolution 320 x 480 Pixels
Colors 260K
Camera 1.0 MP
Flash Yes
Video 176 x 144 Pixels
Secondary Camera Supported Yes
Secondary Camera Lens 300K Pixels
Bluetooth Support 2
I/O Interface 3.5mm, Micro USB, SIM slot
Software DealExtreme, 91 mobile phone assistant, ES task manager, ES file manager, Spring Zen HD, Google search, News and weather, Camera, Browser, Calculator, Clock, Calendar, flashlight, wireless keyboard etc.
Features 3.5" Capacitive Screen + GSM Quad-Band + GPS + Wi-Fi + Android 2.3 + FM
FM Yes
Format Supported MP4 / 3GP / AVI / MP3 / PNG / GIF / JPEG etc.
Sensor G-sensor
Battery Type Lithium
Capacity 1500 mAh
Talk Time 480 Minutes
Standby Time 72 Hours
Manufacturer's Warranty 12 Months excluding physical damages (see specifications for terms and details)
Packing List 1 x Phone
2 x Batteries
1 x Earphone
1 x 100~240V power adapter (2-flat-pin plug)
1 x USB data cable
1 x English / Chinese user manual
On some websites i found out that the processor is an MTK6573 and not an MTK6513 in what way i can be sure about the spec.. can i write or run a script to be sure of the underlying hardware?
Other infos from the phone:
model c110
android version 2.3.6
baseband version MAUI.11AMD.W11.37.SP.V8, 2011/11/04
kernel version 2.6.35.7 [email protected] #1 Tue May 29 11:06:03 CST 2012
Custom Build version 1338260779
build number M708_6513_HYDY_120529_028R_V3
Please help me.
http://forum.xda-developers.com/showthread.php?t=1598713
use this thread to start porting
BASE and PORTED must be the same CPU. e.g. ARMv7, ARMv6, ARMv5
BASE & PORTED should be the same Android version.
If you are porting a custom GB ROM, then use a GB BASE, the same goes for ICS and JB
Make sure both BASE & PORTED are deodexed (It's hard to port an odexed ROM)
thank you for the fast reply!
but as i can read on the guide that you suggested to me:
if you do not have a GB/ICS/JB already compiled for your device, then this Guide is useless for you.
Click to expand...
Click to collapse
i haven't nothing except the phone and a lot of will power (sorry for the english). Any other suggestions?
Dolcezeus said:
thank you for the fast reply!
but as i can read on the guide that you suggested to me:
i haven't nothing except the phone and a lot of will power (sorry for the english). Any other suggestions?
Click to expand...
Click to collapse
well i can see ur on stock gb......................u can mod that ........................:angel:
---------- Post added at 09:05 AM ---------- Previous post was at 08:58 AM ----------
there u go
http://forum.xda-developers.com/showthread.php?t=1801690
http://forum.xda-developers.com/showthread.php?t=1862782
http://forum.xda-developers.com/showthread.php?t=1661770
http://forum.xda-developers.com/showthread.php?t=1863547
this can be used as a start for developing
---------- Post added at 09:20 AM ---------- Previous post was at 09:05 AM ----------
http://forum.xda-developers.com/showthread.php?t=969266
http://forum.xda-developers.com/showthread.php?t=1354865
http://forum.xda-developers.com/showthread.php?t=1762641
http://forum.xda-developers.com/showthread.php?t=1455141
missed this in the last post:
http://forum.xda-developers.com/showthread.php?t=1272270
http://forum.xda-developers.com/showthread.php?t=1611349
http://www.youtube.com/watch?v=1_H4AlQaNa0
http://www.youtube.com/watch?v=rFqELLB1Kk8
http://forum.xda-developers.com/showthread.php?t=1465477
Thank you for the reply its not a problem cook a ROM I thing that I'm able to do it.
My doubt it's about the custom manufacturer kernel...in what way I can have it and cook it with my custom ROM?
Thank you in advance.
Dolcezeus said:
Thank you for the reply its not a problem cook a ROM I thing that I'm able to do it.
My doubt it's about the custom manufacturer kernel...in what way I can have it and cook it with my custom ROM?
Thank you in advance.
Click to expand...
Click to collapse
How To: Extract a Kernel From a ROM
There's a kernel you like, but it is only available packaged with the developer's ROM. You like the features of a different ROM, but want to use the kernel of the first ROM. Or maybe you want to keep your stock ROM, but use a kernel packaged in a custom ROM. What do you do? You extract the kernel (this sounds a lot cooler than it actually is).
Standard disclaimer: this procedure should not be done by anyone ever. But if you do do it and blow your phone up into tiny little pieces, I am not responsible.
You might have noticed that all ROMs and kernels come in zip files, which you install in ClockworkMod Recovery or Team Win Recovery Project. Ever tried looking in one of those zip files? You'll find a bunch of files and folders. One of these files, called "zImage", is the kernel. Here is how to take a kernel out of a ROM to use in another ROM or by itself, in 3 (you should already have done step 0 but I put it there just in case) easy steps:
0) Make a backup of your phone using Recovery. This is extremely important - if you mess anything up, you'll have a system backup as a restore point. If you don't know how to do this or what I'm talking about, your not screwed.
1) If you don't already have it, download Root Explorer or ES file manager - this will let you view and modify the internals of zip files without extracting them. This is important because other users have reported problems with the unzip ROM>modify ROM>re-zip ROM method.
2) On your computer, unzip the ROM you want to extract the kernel from (it's ok to unzip this ROM since you won't be flashing it) and find the "zImage" file. It will be in a folder called "kernel_update". Set this file aside.
Now, if you are putting the extracted kernel into a ROM that comes with its own kernel, go to step 3a. If the ROM does not come with its own kernel or you want to install the extracted kernel without a ROM, go to step 3b.
3a) Place the ROM you plan on flashing as well as the extracted "zImage" file onto the root of your phone's SD card. Using file manager, look inside the ROM and find the "kernel_update" folder and delete the "zImage" file there, then replace it with the "zImage" from step 2. That's it, you're done! Now just boot into Recovery and flash.
3b) This step is for installing the extracted kernel by itself, and for users who want to use the extracted kernel with a ROM that does not come with its own kernel. To insert a kernel into a ROM that does not come with its own kernel is beyond the scope of this guide (it's a bit messier). So for those users it is easiest to first flash your ROM, then flash the kernel as a separate zip. To do this, first download any stand-alone kernel. Then place both the stand-alone kernel as well as the "zImage" from step 2 onto the root of your SD card. Using file manager, Find the "kernel_update" folder in the stand-alone kernel zip, delete "zImage" and replace it with the "zImage" from step 2. That's it, you're done! Now just boot into Recovery and flash.
I have crashed the C110: I need copy of the original ROM
Dolcezeus said:
Thank you for the reply its not a problem cook a ROM I thing that I'm able to do it.
My doubt it's about the custom manufacturer kernel...in what way I can have it and cook it with my custom ROM?
Thank you in advance.
Click to expand...
Click to collapse
The title says my problem:
My touchpad is dead. Can you help me with a copy of the original ROM?
Thanks in advance,
Oronzo.
Hello, i'm using a cyanogenmod 9 on my optimus sol and i want to decrease ram usage of some system apps even modding them, only the settings app occupies 50 MB of ram, on gingerbread it occupies 10 MB of ram, it's abnormal.
Another question is, how to theme a stock app? I have two apk, one that i want to use as "BASE" and the other where i want to port the "gui", in poo words, i want to port the gui of an apk on another apk, for example i have :
Settings.apk = Base
Settings.apk = Different GUI that i want to port
Last question but less important than the others, is it possible to port an apk builded only for ICS to a GingerBread device?
Thanks.
Hello everyone, im new in the forum and i need your help please. Last week i bricked my phone but i make it the touch points (i think they are) and i make it came back to live. But the rom i flashed was incompleted, i can't use the volume buttons, the touch back button won't work and the touch screen is discalibrated. Anyone got the factory rom for this phone? i need it please, it's new and im desesperated. (sorry for my bad english mistakes)
some info (i can't paste images):
Model i9300
Band 2G: GSM 850/900/1800/1900MHz
3G: WCDMA 850/2100MHz
Sim Card Dual SIM Card Dual Standby
Service Provide Unlocked
Style Bar
Color White
Shell Material Plastic
System
OS Android 4.1.1
CPU MTK6577, Cortex A9 dual core, 1.0GHz
ROM 4GB
RAM 512MB
Screen
Display Size 4.7 Inch
Type TFT, capacitive touch screen
Resolution 854 x 480 pixels
Screen Color 260K Colors
Support Format
Ringtones Type Polyphonic/MP3
Audio File Format MP3/WAV/AMR/AWB
Video File Format 3GP/MPEG4
Image File Format JPEG / BMP / GIF / PNG / GIF
E-book Format TXT / CHM / DOC / HTML
FM Radio Yes, earphone needed
Earphone Port 3.5mm
Card Extend Support TF card up to 16GB extended
Data Transfer & Connectivity
Data transfer USB / Bluetooth
Mobile internet WAP / WIFI
Thanks for the help, everything you know will help me.
Rom
I have this model, I can spend the ROM if you want
zhou xing I9300 android 4.1.1 rom
Hello friends,
I´me interested on this Rom, anyone have this?
zhouxing-i9300 original rom
mak725 said:
I have this model, I can spend the ROM if you want
Click to expand...
Click to collapse
ciao, send me please the ROM
Samsung Galaxy Player 3.6 // Q&A - Helping - General discussion- Informations
[YP-GS1//Samsung Galaxy S WiFi 3.6]
The main goal of the Samsung Galaxy Player 3.6 is to have a cheap, portable and lightweight Android-based multimedia player.
This tread will be the main thread for the Samsung Galaxy Player 3.6 [EUR/KOR/US]. You can find here:
- Help
- Version defining (EU/US/KOR)
- Stock ROMs
- Custom ROMs (CyanogenMod, ...)
- Informations
- Questions & Answers
- Opensource
Rules
1. Don't spam
2. Search fist before you posting something here
3. Be friendly to everyone
4. Stay on topic (Samsung Galaxy Player 3.6)
Version defining
Hardware home button -> Worldwide device (Europe and Korea)
Capacitive home button -> US device
Stock ROMs
Get all stock firmwares HERE
ROMs
RECOMMENDEND: CyanogenMod 10 (Stable/Supported)
- CyanogenMod 7.2 (Discontinued) -> http://forum.xda-developers.com/showthread.php?t=2348041
- KingOS (Discontinued) -> http://forum.xda-developers.com/showthread.php?t=2288978
- CyanogenMod 11 (Extreme unstable/Discontinued)-> http://forum.xda-developers.com/showthread.php?t=2657738
Kernels
- CWM kernel with init.d support -> http://forum.xda-developers.com/showthread.php?t=2340732
- Stock kernel with CWM -> http://forum.xda-developers.com/showthread.php?t=2198234
Links
Old GP 3.6 thread (Outdated) -> http://forum.xda-developers.com/showthread.php?t=1864741
Old development thread (Outdated) -> http://forum.xda-developers.com/showthread.php?t=1829638
CyanogenMod 11 discussion thread -> http://forum.xda-developers.com/show....php?t=2769281
FAQs
Check also out the general Galaxy Player FAQ by zaclimon -> http://forum.xda-developers.com/showthread.php?t=2175920
Q: Why are there a US, EU and a KOR(ean) edition of this device?
A: We don't know why. Samsung logic
Q: Can I flash a US ROM/Kernel to a EU device?
A: No, this won't work, you will soft-brick your device.
Q: When was the GP 3.6 released?
A: In September 2011 on the IFA in Berlin.
Q: Is Samsung still supporting this device?
A: No, the support for it ended in March 2013.
Q: Are there many devs for this device?
A: No, just a few.
Guides
WhatsApp on the GPs -> http://forum.xda-developers.com/showthread.php?t=2271080
Brick Recovering -> http://forum.xda-developers.com/showthread.php?t=2308221
Development
CyanogenMod 11
Android-Linux-OMAP3 kernel port (currently frozen)
Stock kernel 2.6.35.7 for Android 4.x
Specifications
Board code name: Aalto
Board
Board: OMAP36xx
Vendor: Texas Instruments
Series: OMAP3
Revision: REV0.8
CPU
Frequency: 200 Mhz - 1000 MHz (on stock) (Overclockable to 1.25 GHz)
CPU: OMAP3630 revision 2
Vendor: Texas Instruments
With Neon: Yes
GPU
Frequency: 110 Mhz
GPU: PowerVR SGX 530 (REV2)
Vendor: Imaginations Technologies
Audio
DAC (Audio Chip): WM8994 combined with WM1881
Vendor: Wolfson Micro Electronics
Camera
Megapixel: 2.1 MP
Zoom: No
Features: Scenes, Brightness, Video Rec, ...
Wlan/Bluetooth
Model: WL1227
Vendor: Texas Instruments
WiFi Frequencies: 2.4 Ghz
Bands: b/g/n
Other
Touchscreen: Zintinix
Keyboard: AALTO GPIO KEYBOARD
Flash: eMMC (BML/EXT4)
eMMC vendor: Intenso
Opensource
Official Samsung Sources: http://opensource.samsung.com
Device configuration for AOSP-based ROMs: OLD: https://github.com/androthan/android_device_samsung_aalto
NEW: https://github.com/androthan/aalto-device
Proprietary binary blobs: https://github.com/androthan/aalto-vendor
Optimized stock kernel (For Android 4.x): https://github.com/androthan/android_kernel_samsung_aalto_legacy
Android kernel 3.0.8 (Project frozen/Not booting yet): https://github.com/androthan/android_kernel_samsung_aalto-eu
So..
Happy posting!
Do you know the name of the camera shutter files to turn the camers sound off?
MarcelRobinson said:
Do you know the name of the camera shutter files to turn the camers sound off?
Click to expand...
Click to collapse
On Touchwiz devices it's only possible to disable the video recorder sound by deleting /system/media/audio/ui/VideoRecord.ogg. You need root permissions to do that.
Androthan
Thanks I subs
Here :thumbup:
Enviado desde mi HTC One usando Tapatalk 2
Compi, can to know, if our devices is Hdpi? Mdpi o Ldpi?= thanks
khriztianjs said:
Compi, can to know, if our devices is Hdpi? Mdpi o Ldpi?= thanks
Click to expand...
Click to collapse
It uses mdpi graphics.
Sent from my YP-GS1 using xda app-developers app
Touch screen does not work
Hi there,
My sgp 3.6 got stuck into a bootloop
I flashed with odin the xxma1 rom.
Now I'm not into the bootloop but the touchscreen doesn't work.
Is there any solution?
Thanks
Prpr said:
Hi there,
My sgp 3.6 got stuck into a bootloop
I flashed with odin the xxma1 rom.
Now I'm not into the bootloop but the touchscreen doesn't work.
Is there any solution?
Thanks
Click to expand...
Click to collapse
Did you flashed the version for the EU, US or Lorean edition of the 3.6?
Do you have a physical or a capacitive home button?
We need to know this for helping you.
Sent from my Nexus 7 using xda app-developers app
eu - physical button
thank you very much for answering!
I flashed the eu xxma1 for odin. the one posted in this thread: forum.xda-developers.com/showthread.php?t=1864741
Wifi not working after flashing StockCWMGS1.tar
Hello,
I have YP-GS1CW/FOP 3.6 EU with GINGERBREADXXLD1 compilation
I have installed StockCWMGS1.tar with ODIN and all were Ok execpt now wifi doesn´t work .
When I activate wifi it says "error"
Galaxy works ok execpt Wifi.
Can you help me?
I have my son pushing me
P. I have read something about flashing the factoryfs but I don´t understand what´s factoryfs and how I have to do it.
factoryfs is factoryfs.img that I can find in file ".tar" original room ? If I flash factoryfs i lost my data and aplications or they remain in Galaxy ?
I need my factoryfs.img
Regards
Jesus Campos
questions
Hello,
can You tell me how much RAM it has? Does it have multi-touch?
rem07 said:
Hello,
can You tell me how much RAM it has? Does it have multi-touch?
Click to expand...
Click to collapse
It has 512 MB RAM, but only 488 MB are usable. Yes, it has multitouch, you can use max. 5 fingers at the same time.
Sent from my Nexus 7 using xda app-developers app
Touchscreen not working
Androthan said:
Did you flashed the version for the EU, US or Lorean edition of the 3.6?
Do you have a physical or a capacitive home button?
We need to know this for helping you.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hi androthan,
Did you discover anything about my problem?
Regards
hi
I want the pit file for galaxy player 3.6 Because
the USB storage damaged Help me please .
E signature verification failed
When I downloaded the KingOS version(http://forum.xda-developers.com/showthread.php?t=2288978) and booted my YP-GS1(Us) in recovery mode to install it, it would always say:
E signature verification failed
Can someone please help me fix this. Also my device is not rooted.
Wilfred7 said:
When I downloaded the KingOS version(http://forum.xda-developers.com/showthread.php?t=2288978) and booted my YP-GS1(Us) in recovery mode to install it, it would always say:
E signature verification failed
Can someone please help me fix this. Also my device is not rooted.
Click to expand...
Click to collapse
You need CWM to install it, do you have it installed on your device?
zaclimon said:
You need CWM to install it, do you have it installed on your device?
Click to expand...
Click to collapse
No how do I get it?
Wilfred7 said:
No how do I get it?
Click to expand...
Click to collapse
1st page should be plenty of informations..
zaclimon said:
1st page should be plenty of informations..
Click to expand...
Click to collapse
And your sure this is for the YP-GS1 US version that had a touch home screen button(not physical).
Also the KingOS one was the one that gave me the Signature problem.
Wilfred7 said:
And your sure this is for the YP-GS1 US version that had a touch home screen button(not physical)
Click to expand...
Click to collapse
Yes I'm pretty sure. Anyway there's 2 versions of the tar (1 Intl and another 1 US)