Samsung Galaxy Player 3.6 // Q&A - Helping - General discussion- Informations
[YP-GS1//Samsung Galaxy S WiFi 3.6]
The main goal of the Samsung Galaxy Player 3.6 is to have a cheap, portable and lightweight Android-based multimedia player.
This tread will be the main thread for the Samsung Galaxy Player 3.6 [EUR/KOR/US]. You can find here:
- Help
- Version defining (EU/US/KOR)
- Stock ROMs
- Custom ROMs (CyanogenMod, ...)
- Informations
- Questions & Answers
- Opensource
Rules
1. Don't spam
2. Search fist before you posting something here
3. Be friendly to everyone
4. Stay on topic (Samsung Galaxy Player 3.6)
Version defining
Hardware home button -> Worldwide device (Europe and Korea)
Capacitive home button -> US device
Stock ROMs
Get all stock firmwares HERE
ROMs
RECOMMENDEND: CyanogenMod 10 (Stable/Supported)
- CyanogenMod 7.2 (Discontinued) -> http://forum.xda-developers.com/showthread.php?t=2348041
- KingOS (Discontinued) -> http://forum.xda-developers.com/showthread.php?t=2288978
- CyanogenMod 11 (Extreme unstable/Discontinued)-> http://forum.xda-developers.com/showthread.php?t=2657738
Kernels
- CWM kernel with init.d support -> http://forum.xda-developers.com/showthread.php?t=2340732
- Stock kernel with CWM -> http://forum.xda-developers.com/showthread.php?t=2198234
Links
Old GP 3.6 thread (Outdated) -> http://forum.xda-developers.com/showthread.php?t=1864741
Old development thread (Outdated) -> http://forum.xda-developers.com/showthread.php?t=1829638
CyanogenMod 11 discussion thread -> http://forum.xda-developers.com/show....php?t=2769281
FAQs
Check also out the general Galaxy Player FAQ by zaclimon -> http://forum.xda-developers.com/showthread.php?t=2175920
Q: Why are there a US, EU and a KOR(ean) edition of this device?
A: We don't know why. Samsung logic
Q: Can I flash a US ROM/Kernel to a EU device?
A: No, this won't work, you will soft-brick your device.
Q: When was the GP 3.6 released?
A: In September 2011 on the IFA in Berlin.
Q: Is Samsung still supporting this device?
A: No, the support for it ended in March 2013.
Q: Are there many devs for this device?
A: No, just a few.
Guides
WhatsApp on the GPs -> http://forum.xda-developers.com/showthread.php?t=2271080
Brick Recovering -> http://forum.xda-developers.com/showthread.php?t=2308221
Development
CyanogenMod 11
Android-Linux-OMAP3 kernel port (currently frozen)
Stock kernel 2.6.35.7 for Android 4.x
Specifications
Board code name: Aalto
Board
Board: OMAP36xx
Vendor: Texas Instruments
Series: OMAP3
Revision: REV0.8
CPU
Frequency: 200 Mhz - 1000 MHz (on stock) (Overclockable to 1.25 GHz)
CPU: OMAP3630 revision 2
Vendor: Texas Instruments
With Neon: Yes
GPU
Frequency: 110 Mhz
GPU: PowerVR SGX 530 (REV2)
Vendor: Imaginations Technologies
Audio
DAC (Audio Chip): WM8994 combined with WM1881
Vendor: Wolfson Micro Electronics
Camera
Megapixel: 2.1 MP
Zoom: No
Features: Scenes, Brightness, Video Rec, ...
Wlan/Bluetooth
Model: WL1227
Vendor: Texas Instruments
WiFi Frequencies: 2.4 Ghz
Bands: b/g/n
Other
Touchscreen: Zintinix
Keyboard: AALTO GPIO KEYBOARD
Flash: eMMC (BML/EXT4)
eMMC vendor: Intenso
Opensource
Official Samsung Sources: http://opensource.samsung.com
Device configuration for AOSP-based ROMs: OLD: https://github.com/androthan/android_device_samsung_aalto
NEW: https://github.com/androthan/aalto-device
Proprietary binary blobs: https://github.com/androthan/aalto-vendor
Optimized stock kernel (For Android 4.x): https://github.com/androthan/android_kernel_samsung_aalto_legacy
Android kernel 3.0.8 (Project frozen/Not booting yet): https://github.com/androthan/android_kernel_samsung_aalto-eu
So..
Happy posting!
Do you know the name of the camera shutter files to turn the camers sound off?
MarcelRobinson said:
Do you know the name of the camera shutter files to turn the camers sound off?
Click to expand...
Click to collapse
On Touchwiz devices it's only possible to disable the video recorder sound by deleting /system/media/audio/ui/VideoRecord.ogg. You need root permissions to do that.
Androthan
Thanks I subs
Here :thumbup:
Enviado desde mi HTC One usando Tapatalk 2
Compi, can to know, if our devices is Hdpi? Mdpi o Ldpi?= thanks
khriztianjs said:
Compi, can to know, if our devices is Hdpi? Mdpi o Ldpi?= thanks
Click to expand...
Click to collapse
It uses mdpi graphics.
Sent from my YP-GS1 using xda app-developers app
Touch screen does not work
Hi there,
My sgp 3.6 got stuck into a bootloop
I flashed with odin the xxma1 rom.
Now I'm not into the bootloop but the touchscreen doesn't work.
Is there any solution?
Thanks
Prpr said:
Hi there,
My sgp 3.6 got stuck into a bootloop
I flashed with odin the xxma1 rom.
Now I'm not into the bootloop but the touchscreen doesn't work.
Is there any solution?
Thanks
Click to expand...
Click to collapse
Did you flashed the version for the EU, US or Lorean edition of the 3.6?
Do you have a physical or a capacitive home button?
We need to know this for helping you.
Sent from my Nexus 7 using xda app-developers app
eu - physical button
thank you very much for answering!
I flashed the eu xxma1 for odin. the one posted in this thread: forum.xda-developers.com/showthread.php?t=1864741
Wifi not working after flashing StockCWMGS1.tar
Hello,
I have YP-GS1CW/FOP 3.6 EU with GINGERBREADXXLD1 compilation
I have installed StockCWMGS1.tar with ODIN and all were Ok execpt now wifi doesn´t work .
When I activate wifi it says "error"
Galaxy works ok execpt Wifi.
Can you help me?
I have my son pushing me
P. I have read something about flashing the factoryfs but I don´t understand what´s factoryfs and how I have to do it.
factoryfs is factoryfs.img that I can find in file ".tar" original room ? If I flash factoryfs i lost my data and aplications or they remain in Galaxy ?
I need my factoryfs.img
Regards
Jesus Campos
questions
Hello,
can You tell me how much RAM it has? Does it have multi-touch?
rem07 said:
Hello,
can You tell me how much RAM it has? Does it have multi-touch?
Click to expand...
Click to collapse
It has 512 MB RAM, but only 488 MB are usable. Yes, it has multitouch, you can use max. 5 fingers at the same time.
Sent from my Nexus 7 using xda app-developers app
Touchscreen not working
Androthan said:
Did you flashed the version for the EU, US or Lorean edition of the 3.6?
Do you have a physical or a capacitive home button?
We need to know this for helping you.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hi androthan,
Did you discover anything about my problem?
Regards
hi
I want the pit file for galaxy player 3.6 Because
the USB storage damaged Help me please .
E signature verification failed
When I downloaded the KingOS version(http://forum.xda-developers.com/showthread.php?t=2288978) and booted my YP-GS1(Us) in recovery mode to install it, it would always say:
E signature verification failed
Can someone please help me fix this. Also my device is not rooted.
Wilfred7 said:
When I downloaded the KingOS version(http://forum.xda-developers.com/showthread.php?t=2288978) and booted my YP-GS1(Us) in recovery mode to install it, it would always say:
E signature verification failed
Can someone please help me fix this. Also my device is not rooted.
Click to expand...
Click to collapse
You need CWM to install it, do you have it installed on your device?
zaclimon said:
You need CWM to install it, do you have it installed on your device?
Click to expand...
Click to collapse
No how do I get it?
Wilfred7 said:
No how do I get it?
Click to expand...
Click to collapse
1st page should be plenty of informations..
zaclimon said:
1st page should be plenty of informations..
Click to expand...
Click to collapse
And your sure this is for the YP-GS1 US version that had a touch home screen button(not physical).
Also the KingOS one was the one that gave me the Signature problem.
Wilfred7 said:
And your sure this is for the YP-GS1 US version that had a touch home screen button(not physical)
Click to expand...
Click to collapse
Yes I'm pretty sure. Anyway there's 2 versions of the tar (1 Intl and another 1 US)
Related
Hi,
Ii bought my Archos device knowing it is a great developer device - anyway im not into porting linux,...
As there are many mobile OSes and i really want a "normal" linux on my 101 too, I thought about gathering all Informations about the different OSes so it's easier to choose one
Anyway this is what i know for now (will just include latest versions - unless there are different develoment stages):
Android:
Froyo (2.2 ...)
Archos Stock 2.4.82 - (changes)
UrukDroid (download, server-link, homepage, wiki, development, bugs, TV, 3G)
Urukdroid 1.1RC1 (based on FW 2.3.38) - 1.1RC2 update - 1.1RC3 kernel
develoment stopped
Cinema-Plugin enabled
UrukDroid 1.6 (based on FW 2.4.81, Android 2.2.1), Changelog
OC module included
Overclocked Kernels for UD (DO NOT USE UNLESS U KNOW WHAT U ARE DOING)
releases by Sauron are always filed at his server
releases by Sibere are always linked in his Signature
Gingerbread (2.3 ...)
openAOS Android Anoa (CM 7) - version 18.08.2011 (homepage, download, bugs)
openAOS Bull RC2
Honeycomb (3.0 ...)
we will never see - due to missing sources
ICS (4.0 ...)
ICS for Gen8 (wip, to be released)
...
other Linux:
Linux Angström
Archos SDE, version ?
Kubuntu
Kubuntu Mobile for GEN 8 Tablets, Pre-alpha Test release
Kubuntu (KDE Plasma Active) how to build
Ubuntu
Bbodhilinux (Ubuntu based with Enlightenment), version Alpha 1 (development stopped as it seems)
Ubuntu install guide
Meego
noting yet, really like too see
Debian
Debian-Archos (XFCE4 Alpha 0.3, Gnome Beta 2,...)
If u now ask - how to use them - here is the answer:
OpenAOS Multiboot
UrukDroid AlternativeOS (UD >= v1.1 needed)
or just installthe SDE and replace the rootfs.img file on the device with your deserved one (maby wont work for all OSes)
PLEASE DO NOT USE THIS FOR QUESTIONS ABOUT OSes OR FOR BUGS,... this is just for gathering information about available OSes.
Thanks
As I can't search for all those on myself I'll be happy to get some help:
love to see post like "UD 1.5B4 is out -> LINK"
and please correct me if im wrong with information provided...
Last but not least THANKS to all DEVs like Sauron, Bubu, letama, Sibere...
last changes:
- bug fixes
- Ubuntu install guide
(just to fix an error, Froyo is 2.2 )
You've forgoten Debian ^^
also, you forgot gingerbread (cm7)
Nop, he just did a mistake by naming it : crayogen ^^
eagleofdeath13 said:
(just to fix an error, Froyo is 2.2 )
You've forgoten Debian ^^
Click to expand...
Click to collapse
any releases?
Releases of Debian? Yes, here : http://www.debian-archos.com/
(And there's a topic somewhere here, but not so moving ^^
New firmware
Archos Internet Tablet have already update a new firmware:
Version 2.4.19 - August 18th, 2011
Display: improve UI fluidity
Display: suppress black/white screen happening sometimes when exiting suspend
Applications: increase compatibility with third party music players
Applications: fix black camera image for skype upstream video
Video: fix some mp4 files stopping with audio errors
Video: fix some H264 streams not decoding correctly
Audio: fix some FLAC files not playing correctly
Internationalization: improve Spanish, Italian, Dutch translations
To the DEVs
KDE Plasma Active would be nice and smooth...
Runs on BeagleBoard with similar ARM A8.
I think it could be a nice alternative.
http://www.youtube.com/watch?v=T0t4sqG2Ueo
http://www.youtube.com/watch?v=IgdnuxcUcWg
TomAngel said:
KDE Plasma Active would be nice and smooth...
Runs on BeagleBoard with similar ARM A8.
I think it could be a nice alternative.
http://www.youtube.com/watch?v=T0t4sqG2Ueo
http://www.youtube.com/watch?v=IgdnuxcUcWg
Click to expand...
Click to collapse
and u knwo what - i found some explatations on how to get it wokring - even plasma active seems to be in early developerment stage - but if u wnat to test it out...
check out: https://wiki.kubuntu.org/ARM/Archos101it
FrEcP said:
and u knwo what - i found some explatations on how to get it wokring - even plasma active seems to be in early developerment stage - but if u wnat to test it out...
check out: https://wiki.kubuntu.org/ARM/Archos101it
Click to expand...
Click to collapse
Cool, but I don't understand everything in Tut's.
Even could be a bit risky. Someone of the coders here should make an Image and upload it for all of us.
A Video would be nice to see the responsiveness.
Version 2.4.81 - December 6th, 2011
Archos 35 home connect: new tunein professional application version integrated
Archos 35 home connect: adjust minimum speaker volume level
A101 accessory: add Kontron (Industrial Computer Source / ICS Advent), DM9601 Fast Ethernet Adapter support
Suspend: solve power consumption regression
patrician said:
Version 2.4.81 - December 6th, 2011
Click to expand...
Click to collapse
My Archos 101IT, running 2.4.80, still claims its firnware is up-to-date.
sciurius said:
My Archos 101IT, running 2.4.80, still claims its firnware is up-to-date.
Click to expand...
Click to collapse
just try the manual update
UrukDroid 1.6RC4 (based on FW 2.4.65, Android 2.2.1) ?
i cant fine main topic about this rom. is it stable or beta release ?
UrukDroid 1.5 is install on my tablet
1. As the RC4 is in the developer thread, it can't be a mainrealese.
2. RC4 also implies that it's not release.
3. It is based on 2.4.80.
4. This is the developer part, so you can't expect anything here is released.
Hi,
Could you please change links for UrukDroid. Some people use installation files without even reading a bit of documentation and this makes a lot of questions later.
Please point download files to proper download file section of UD wiki
http://code.google.com/p/urukdroid/wiki/Download
and changelogs, to changelog page
http://code.google.com/p/urukdroid/wiki/Changelog
thx.
$aur0n said:
Hi,
Could you please change links for UrukDroid. Some people use installation files without even reading a bit of documentation and this makes a lot of questions later.
Please point download files to proper download file section of UD wiki
http://code.google.com/p/urukdroid/wiki/Download
and changelogs, to changelog page
http://code.google.com/p/urukdroid/wiki/Changelog
thx.
Click to expand...
Click to collapse
Sure - done
Even I fear they still wont read
Are any of these firmware versions suitable for an Archos 70 Internet Tablet HDD version? (originally a 250Gb model, upgraded to 1Tb) - model A70H according to the recovery screen.
I'm trying to repair this, as it won't boot, but the firmware on the Archos site won't install.
itm said:
Are any of these firmware versions suitable for an Archos 70 Internet Tablet HDD version? (originally a 250Gb model, upgraded to 1Tb) - model A70H according to the recovery screen.
I'm trying to repair this, as it won't boot, but the firmware on the Archos site won't install.
Click to expand...
Click to collapse
As the A70H is a Gen8 Device they basicly should work.
Further Investigations: http://forum.xda-developers.com/showthread.php?t=1459221
cant trasnfer the files for urokdroid 1.6 it requier 164mb and when im in recovery mode and setup usb connection the hdd space that appears on the PC is only on 125mb, so what can i do?
I just try some post over the forum but i just cant change... Anybody can help me?
PD: Sorry for my bad english but it's no my foreign languaje
Samsungs have a hardcoded bootanimation - it can't be changed without a custom kernel with standard bootanimation support.
None of those exist yet - haven't had the time to implement it.
Because Samsung devices useing qmg bootanmation files
Samsung did not released(?) about qmg format(qmg edit tool or source)
to use bootanmation.zip you shouled install custom kernel which supports bootanmation.zip
It can be done!
Just flash this zip file in recovery, then you're good to go. This was originally designed for the Galaxy S5, but I have confirmed that it works on the Samsung Galaxy Player 5.0.
palmerchaun said:
Just flash this zip file in recovery, then you're good to go. This was originally designed for the Galaxy S5, but I have confirmed that it works on the Samsung Galaxy Player 5.0.
Click to expand...
Click to collapse
You do realize that this thread is over 2 years old...
Yesh, I believe this is a case of necro posting
________________________________________________
· US Samsung Galaxy Player 5.0 (YP-G70)
- Carbon ROM 4.4.4 KitKat
> By Meticulus Dev Team; visit their site at http://www.meticulus.co.vu/
- Entropy512's Daily Drivers Kernel
Yes, I realize it is old, but it was never resolved on this forum.
Project is discontinued and unsupported
I dont provide any more support for this project.
I'm quitting projects for concentrating on new ones.
This one is unsupported and won't be updated.
No more test tickets.
Introducing...
FloydOS - A smooth combination of ROM and Kernel
YP-GS1|Galaxy Player 3.6|Galaxy S WiFi 3.6
YP-GI1|Galyxy Player 4.2|Galaxy S WiFi 4.2
Hello XDA
The main goal of FloydOS is to have a smooth, lightweight and hardware-adjusted AndroidROM, so the OS stands in the background, and you can run on it what you want!
Actuaylly FloydOS isn't completely finished and not made for daily use.
If you want to test the OS, just PM me or send me an email: androthan[at]gmail[dot]com .
Here is a little overview (not complete):
Features
- Overclocking to 1.1 Ghz (We will go higher!)
- Many new governors (smartass, smartass2, smothass, powersave,...) http://forum.xda-developers.com/showthread.php?t=1663809
- Using the capacitive buttons as notification leds
- Undervolting CPU
- Extendend battery life
- Optimized and more user-friendly recovery system (based on CWM 5.0)
- Optimized scrolling
- and all the good features from Android Gingerbread and CyanogenMod 7.2 !
Not working
- Internal storage (still fixing that, it's very difficult!)
- Camera
- FM Radio
- Some apps can't use the microphone
Supported devices
Samsung Galaxy Player 3.6 EU (US will be updated later...)
Samsung Galaxy Player 4.2 EU/US
Thanks to...
...Google
...Samsung
...codeworky
...waleedq
...The CyanogenMod Project and all its maintainers
...
Disclaimer
I'm not responsible for dead phones, dead sd-card or dead accesoires. You and only you decided to do these changes!
Newsticker
24.04.2014 - First introduction!
25.04.2014 - Sent ROM to testers
wow this sounds really awesome
cant wait to test you have got an pm from me
edit1: delete...
edit2:delete too...
@ChaosChris
Thanks for helping me, but it's a kernel thing, why we can't mount emmc.
Sent from my Nexus 7 using xda app-developers app
Bugs in YP-GI1:
-> Display brightness adjustment
-> Wifi
-> Audio
-> Internal storage ( OP )
-> Spirit FM ( OP)
-> Camera ( OP )
-> Capacitive buttons' backlight
-> Deep sleep
Overclock works fine, and basically everything else. Also, I'm unable to restore a backup made with zaclimon's CWM with the new recovery. I don' know of that's normal, or a bug.
drakonizer said:
Bugs in YP-GI1:
-> Display brightness adjustment
-> Wifi
-> Audio
-> Internal storage ( OP )
-> Spirit FM ( OP)
-> Camera ( OP )
Overclock works fine, and basically everything else. Also, the capacitive buttons' backlight is also not working.
Click to expand...
Click to collapse
can confirm this, also deep sleep is broken too.
but audio over bluetooth works! :good::laugh:
Does the ROM support t-mobile theme chooser like on cyanogenmod?
Sent from my SM-G900 using xda-developers app
It is just a modded version of cm7
Sent from my YP-GI1 using xda app-developers app
Ok, I tested this ROM for 2 days on the 3.6; the only non-mentioned bug i found is in the recovery: factory reset doesn't work, after flashing this ROM. Games run smoothly (i didn't test heavy games, cause they need space on the SD) and battery seems to be a little better than in stock rom. But i have some suggestion: i would remove all the RIL-related section and apps and change launcher, 'cause ADW is so laggy.. anyway, nice rom
Do you think you will make it work for the 5,0 galaxy player?
aznflawless said:
Do you think you will make it work for the 5,0 galaxy player?
Click to expand...
Click to collapse
This is an odd request due to the fact that the 5.0 has CM 11.0 already created. I recommend that. and also, this is a warning for everyone who is wondering a similar question, DO NOT TRY FLASHING THIS ON A 4.0 OR 5.0 PLAYER OR YOU WILL BRICK IT. I am not saying you shouldn't put it on 3.6 or 4.2 player, it is made for those devices.
link to the 5.0 CM 11.0 rom found at the end of this post.
best of luck
http://forum.xda-developers.com/showthread.php?t=2571357&page=14
---------- Post added at 12:46 PM ---------- Previous post was at 12:32 PM ----------
Androthan said:
Introducing...
FloydOS - A smooth combination of ROM and Kernel
YP-GS1|Galaxy Player 3.6|Galaxy S WiFi 3.6
YP-GI1|Galyxy Player 4.2|Galaxy S WiFi 4.2
Hello XDA
The main goal of FloydOS is to have a smooth, lightweight and hardware-adjusted AndroidROM, so the OS stands in the background, and you can run on it what you want!
Actuaylly FloydOS isn't completely finished and not made for daily use.
If you want to test the OS, just PM me or send me an email: androthan[at]gmail[dot]com .
Here is a little overview (not complete):
Features
- Overclocking to 1.1 Ghz (We will go higher!)
- Many new governors (smartass, smartass2, smothass, powersave,...) http://forum.xda-developers.com/showthread.php?t=1663809
- Using the capacitive buttons as notification leds
- Undervolting CPU
- Extendend battery life
- Optimized and more user-friendly recovery system (based on CWM 5.0)
- Optimized scrolling
- and all the good features from Android Gingerbread and CyanogenMod 7.2 !
Not working
- Internal storage (still fixing that, it's very difficult!)
- Camera
- FM Radio
- Some apps can't use the microphone
Supported devices
Samsung Galaxy Player 3.6 EU (US will be updated later...)
Samsung Galaxy Player 4.2 EU/US
Thanks to...
...Google
...Samsung
...codeworky
...waleedq
...The CyanogenMod Project and all its maintainers
...
Disclaimer
I'm not responsible for dead phones, dead sd-card or dead accesoires. You and only you decided to do these changes!
Newsticker
24.04.2014 - First introduction!
25.04.2014 - Sent ROM to testers
Click to expand...
Click to collapse
@Androthan people can probably get the fm radio working if they use spiritfm (link below). I dont know for sure but the reason i am suggesting it is because @zaclimon recommends it for the 4.0 users to use in order to listen to the fm radio on their devices so it might work on the 3.6 and 4.2.
best of luck
can this procedure help you for fix the internal storage?
So to mount Internal SD card to /mnt/sdcard and External SD card to /mnt/sdcard/external_sd as it is done on Stock ROMs proceed with the following:
1 - Open the file /etc/vold.fstab with your preferred text editor (I use root Explorer) and find and modify the last lines as below an then save:
# internal sdcard
dev_mount emmc /mnt/sdcard 28 /devices/platform/msm_sdcc.1/mmc_host/mmc0/mmc0
# external sdcard
dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.3/mmc_host/mmc2/mmc2
# otg sdcard
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/msm_hsusb_host.0
#end line
2 - Open the file /system/build.prop with your preferred text editor and find and modify the following lines as it is show an then save:
# notify vold we have internal and external sd
ro.additionalmounts=/mnt/sdcard/external_sd
ro.vold.switchablepair=/mnt/sdcard/external_sd,/mnt/sdcard
3 - Reboot the phone and voilá
Click to expand...
Click to collapse
I want test this ROM on my SGP 3.6. @Androthan you got a PM from me
PM?
xXPR0T0TYPEXx said:
I want test this ROM on my SGP 3.6. @Androthan you got a PM from me
Click to expand...
Click to collapse
Yes I would also like to try this ROM. But, I have no idea what a PM is so...
Thanks,
Henry Hilliard
Henry Hilliard said:
Yes I would also like to try this ROM. But, I have no idea what a PM is so...
Thanks,
Henry Hilliard
Click to expand...
Click to collapse
Private message lool. XD
Envoyé de mon Nexus 7 en utilisant Tapatalk
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
ROM Version 3
https://www.androidfilehost.com/?fid=457095661767119153
CHANGELOGS:
Version 1: Initail build with
Version 2: Camcorder fixed
Version 3: Latest 2016-11-01 b/31618336 security patch
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Differences ?
Thank you for the effort. Could you also elaborate the differences between your rom and Dhinesh77's CM 11 rom ?
Differences
Main difference App2SD
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
The video guide is no more exists. can you please upload video for installing this rom.
Thanks!
5310
Hello,
does this ROM work on 5310 without issues?
Thanks in advance...
zhlvf
Can you make App2sd flashable for the stock rom?
Cristiano Lira said:
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
Click to expand...
Click to collapse
Download Link2sd (available on Google Play) and in the settings appears an option to define where the apps are going to be installed as default
This is what appears (I have it in Spanish)
Installation aborted
I did the wipe data/factory reset but it doesn't install
well, at least I could install v2
---------- Post added at 11:42 PM ---------- Previous post was at 11:23 PM ----------
any changelog between v1 and v2?
I have being examinating the ROM and I have seen less things in configurations than in Dhinesh´s version, but they are minimun compared to the App2SD. Now I have liberated a lot of memory, THANKS KARTHICK!
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Hi, I'm from Chile, the same happens to me but I don't care. I think the problem is with the kernel
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Actually, there is no way
Is it compatible with gt-s5312b??
karthick mostwanted said:
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Click to expand...
Click to collapse
Is this ROM compatible with the gt-s5312b device?
And if it is, how van I avoid the "status 7" error? This ROM has no updater file for make possible an edition deleting the "assert" part!
Missing Drive uHID suport for joystick bluetooth
Missing uHID drivers for Joystick and Gamepad Bluetooth .. and Bug in Brightness
To fix bug can't adjust brightness on CM11 mw v3..
Download this zip : Fix Brightness
Flash this zip on recovery..
I hope the brightness working properly..
Sorry for my bad english.. :""v
Thanks to @karthick mostwanted and all dev from gts5312/gts5310
Audio not working on S5310
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
atomicbob said:
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
Click to expand...
Click to collapse
Bro try this one : https://www.androidfilehost.com/?fid=385035244224403140
I think this is the best rom for neo
cm-11-20161202-UNOFFICIAL-corsica.zip
Kristaps(Lv) said:
I think this is the best rom for neo
Click to expand...
Click to collapse
Thanks for the link, it is has the same kind of interface only in this rom everything works perfect for my S5310. Karthick111 has a lot of interesting files over there at androidfilehost. :good: