Related
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
PS: I just this minute reflashed using Heimdall the I9300XXBLFB. Now it boots up, on first boot it said Updating Android optimsing applications 1/65 and proceeded thru to the point it asks me which language I want... this normal??
kuntstubble said:
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
Click to expand...
Click to collapse
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
gee2012 said:
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
Click to expand...
Click to collapse
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
OrbNRG said:
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
Click to expand...
Click to collapse
Once again, I'm using Heimdall not Odin. I'm on OSX not Windows.
Secondly the tar.md5 file is a tar file containing all the components that make the ROM.
kuntstubble said:
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
Click to expand...
Click to collapse
Oke, my bad. I don`t use heimdal so can`t help you.
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
HellcatDroid said:
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
Click to expand...
Click to collapse
Done that also, made no difference :-(
I don't care which ROM I recover correctly but I do want to get the phone working LOL
Use a windows pc and stop using mac?
Its really easy to fix your problem via Odin....
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
pedja381 said:
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stupid reply USB Jig does not unbrick a phone .
ODIN how can the OP use Odin and why would you think its better than Heimdall ??? .
jje
OK the phone is running, but it's bizarre ...
Basically I'm connected to my WiFi signal, and Chrome works 100%... but the normal browser does'nt... just hangs, then closes.
GMail if I open it I can see all the mails, if I click on one, it just sits there with the circle going round, then closes, although if I scrolll thru all mails it does load more... very strange.
Seems any default apps that where installed have connection issues... It's really pi**ing me off....
Anyone?
BTW: *#1234# reports:
AP: I9300XXBLFB
CP: I93000XXLFB
CSC: I9300OXABLFB
It doesn't matter if you change .tar.md5 to .tar i always do it to.
What was the name of the pit you flashed?
Hi,
I downloaded GalaxyS3RootMac which contained a file called
s3pit.pit
MD5 (s3pit.pit) = c67ccbe3628793a9f0dba761c15e0896
Thats the one I used ... stupidly ... so I guess I overwrote mine own one...
I had this exact same thing with browser. That was caused eather from wrong csc or that I mistakenly flashed the firmware using phone field in odin and not pda. Try to change your csc to something else using *#272*IMEI#. That wipes the phone.
Tried what you recommend but still same problem
I choose BTC btw
It previously was on KOR
Sent from my GT-I9300 using xda premium
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
d4fseeker said:
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi, well you're completely correct I could go bootcamp although I prefer not to. If all else fails I'll do it that way. Sadly today I can't get my hands on a Windows system to use.
The phone is a Benelux model I believe (bought from Mobistar), under that battery it says i9300 from what I remember.
Cheers for the logical response
I got exactly the same problem as the OP with the S3, a Macbook Air on Lion, and Heimdall yesterday. I was frustrated but ended up trying Odin on a Windows 7 virtual machine to re-flash a stock firmware. It went through perfectly and I was saved.
Hey guys.
I have a GT- i9300, I rooted it in odin with CF root, no worries, installed foxhounds Rom with SiyahKernel. All was fine for a few weeks. My phone then randomly shut down one day and would not boot. (had not installed any 3rd party apps, custom upgrades or anything for a few days).
My phone now only boots to the Samsung splash screen. Will not boot into recovery mode either. Download mode still works
So i tried to re flash the kernel through odin but I get an error "no PIT partition"
Tried flashing a stock Firmware through odin, same error.
Tried flashing CWM again through Odin, same error,
Tried flashing CF root again in Odin, same error.
Any ideas please help???
I have looked all over the net for two days now and found some people with same problem but they have not fixed it yet.
Would a 3-part firmware work in Odin? If so I have downloaded countless ones only to find they are the single .tar file
3 part works via Odin.
jje
Sent from my GT-I9300 using xda premium
Any idea where I can get one from? Every Rom I download is only the one .tar file.
Sent from my GT-I9100 using xda app-developers app
same problem here...
any help will be very appreciated...
tzujeff1008 said:
same problem here...
any help will be very appreciated...
Click to expand...
Click to collapse
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
R4M30 said:
Hey Man, I have been searching the net for days now and trying countless different things in Odin but still no Luck. From what I have read if we can find a 3-part firmware +pit file and we flash them through Odin and tick re-partition it should fix it.
Problem being I cant find one, I have asked on other forums and asked Intratech himself but no response yet. If I figure it out though I'll let you know and you do the same for me hey?
Click to expand...
Click to collapse
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Hi,
I'm having the exact same issue...
It happened me after installing CM10 Prev. #4.. I tried to make a phone call to test the sound problem. and suddenly it rebooted into a boot-loop.
After that I tried to re flash the .zip file to get it booting again but i couldnĀ“t even get into {install zip from internal SD Card]
Then i tried to go back to stock with Odin but didn't work..
Tried to repartition with different .pit files on different pc's with different OS. but nothing helped..
I'm planning on returning it too. I hope they will repair it...
i'll let you know and looking forward to hear something from you.
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
tzujeff1008 said:
hey, no luck for me so far. I am from Taiwan. I have found 5-part stock firmware, which has pit, bootloader, phone, csc, PDA. But it gave me another error: Re-partition operation failed. It seems the partition table has been crashed.
I have returned it for repair(distributor), and I was told that the phone needs to replace the mainboard. And since they told me I have tried to install custom firmware or software, I no longer have the warranty. The fee is unacceptable high, almost half price of the phone.
I will take my phone back and send it to Samsung repair center. Wait and see if any different solutions Samsung can provide me.
I am still looking for other possible solutions, and if I found one, I definitely will share it with you.
The worse thing is the hardware damage. Hope it is not....
Click to expand...
Click to collapse
Hello tzujeff1008
I have same problem & I couldn't find that ROM.
Thanks first of all & Please Give me link of that ROM or tell me where I can find that.
R4M30 said:
I ended up taking mine back and it got replaced under warranty
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
tzujeff1008 said:
mine too got repaired ,under warranty
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
wo that nice ..hey after flashing.. have u dne trangle away? asking coz u have rootd and still u got replcement: S ???
Sent from my GT-I9300 using xda premium
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
boobool said:
please pleeeeeeeeeeeeeeease help me guys!!!!!!!!!!
my phone is ****ed up.
i was runing checkrom V3.5.connected device to AC charger(supplied charger) and then slept for 1 hour.
when iwake up my device stuck at samsung logo.
i can't enter recovery mode,just can go to download mode.i got there and tried to flash CF-root v6.4 with odin v1.85(in chainfire thread said),when i hit start in odin it fails and says there is no PIT partition.what should i do?
i downloaded odin from SAMMOBILE.COM, and in zip file there is PIT file.now what should i do?should i flash stock firmware?
it's important to say i had SGS2 before and i'm not noob.
pleeeeeeeeeeeeeeease help me:crying::crying:
which .PIT file should i use?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
M0_20120220.pit
mx.pit
can i try to flash phone via odin with .PIT file and kernel
Click to expand...
Click to collapse
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
tzujeff1008 said:
You have no choice! Try every pits you got, you might get another error : Re-partition operation failed...
So far, I believe that is hardware damage, and there is nothing you can do but send it back for repair(replacement).
If you have run triangle away before the phone crashed, then you are lucky, You might get replacement under warranty.
I did that before broken. There was no counter, but showed custom rom in download mode.
So it is hard to judge if I flash custom rom or not. The second time I sent my phone back to same repair center, they finally did replacement for me for free.
Good luck to you, and hope it is not hardware damage.
Click to expand...
Click to collapse
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
boobool said:
many thanks for really complete answer brother.
tried to flash stock firmware.after 2 minutes odin said there is no pit partition.
again tried and this time with PIT file, happened what you expected ,it said Re-Partition operation failed.:crying::crying:
luckily i don't have yellow triangle and in download mode it says samsung official.so i think it's better to send it to a warranty service center.
another question i have is why does this problem appear ?
i just connected phone to the charger and slept for 1 hour.when i woke up saw samsung logo on phone and it happened what you know.
again thanks for your help brother.
Click to expand...
Click to collapse
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Chewee91 said:
Did you try with GT-I9300_mx_20120329.pit ? works fine for I9300 repartition...
Click to expand...
Click to collapse
tzujeff1008 said:
I connected phone to the charger over night, and when I woke up, it just happened.
I have no clue why this happens, just doubt if the charging system has flaw.
Great that I can share experience with you guys.
Click to expand...
Click to collapse
thanks for responses brothers.
i tried 5 different pit files and one of them was GT-I9300_mx_20120329.pit.
it didn't help.actually when inserting pit file in odin it says Re-partition operation failed. and when pit place in odin is empty it says there is no PIT partition.
i tried to flash 3 part stock rom,same result.
tried those methods with odin 3.04 and odin 1.85, both of them gave me same result.:crying::crying:
If you always search a 3 parts firmware, try this one:
http://hotfile.com/get/159511026/500faffb/47a90c3/I9300XXALE8_I9300OJVALE7_FWD.zip without and with pit file
(morocoo CSC i think), just in order to test if it's works.
If it is, you'll flash your firmware (CSC THR) here:
http://hotfile.com/get/164216390/500fb0d0/c94977c/I9300XXBLFB_I9300OJVBLF3_THR.zip
If don't work, use warranty...
Just letting you know that i had the Exact same problem.
When trying to flash (when in download mode) it would always error when trying to get the PIT information.
Nothing would work, besides from download mode. When trying to hard reset, it would get to the logo screen and immediately turn off.
It was rooted + cmw + no triangle away. So it could be easily seen that it rooted
I took it back to warranty.
It was a fault motherboard. That was the issue. They replaced it and re-flashed with stock os.
And it was covered under warranty (the best part).
Same I issue I think
Hi. I think I have the same problem with my unrooted, stock S3. (unbranded UK)
Just suddenly apopeared with the grey battery with the static "O" symbol in it, and when booting doesn't get past the first Samsung screen.
Can get into recovery mode, when trying Odin with XXBLG8 stock ICS ROM, I get the "no PIT partition" error.
Please tell me my phone isn't dead :crying:...
Cheers
Brad
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
lumogox said:
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
Click to expand...
Click to collapse
Any response? My phone is going through the exact same thing with the old TV static and only download mode working
Take phone to a service centre . Its a paid for repair warranty void .
jje
But you shoul give more details. When I read "flash several ROMs with Odin", I'm wondering what ROM? How did you use Odin? What version of Odin? etc...
flashing a wrong pit file kills the phone, and you flashed every possible one. good job
More details
Glebun said:
flashing a wrong pit file kills the phone, and you flashed every possible one. good job
Click to expand...
Click to collapse
Well I flashed the pit files when the phone was already bricked, not before. I try to do this as a possible resolution to my problem.
Kremata said:
But you shoul give more details. When I read "flash several ROMs with Odin", I'm wondering what ROM? How did you use Odin? What version of Odin? etc...
Click to expand...
Click to collapse
And the roms I flashed, in this order: 1. CyanogenMod 10.1, Paranoid, CyanogenMod again, and Ultima ROM.
After the installation of Paranoid, the device started to freeze, over and over again, and continue to do it over the other ROMs.
Also, I went to a so called "technician", and the guy says the mainboard must be replace, because i damage the bootloader.
Commets :laugh:
lumogox said:
Well I flashed the pit files when the phone was already bricked, not before. I try to do this as a possible resolution to my problem.
Click to expand...
Click to collapse
it doesn't matter, you've killed your phone
lumogox said:
Hi guys, i got a little issue with my galaxy i9300 international version, let me tell you what I did and the results to that.
1. Flashed with Cyanomogen 10.1. Working fine.
2. Then, afer a few days, flashed with Paranoid.
3. Phone starts to freeze, so as I didn't know was going on, and tried to flash with another ROM.
4. Flashed several times with ODIN and tried to stabilize it with stock room XELLA.
5. Flashed with Ultima ROM, still freeze sometimes.
6. Phone stops boots, if I turn on normally, shows a screen like an old tv, white with stripes.... also shows it when I plug it to charge it.
7. Only enters to download mode.
8. Tried to flash it, however says partition failed, there is no pit partition.
9. Tried with every single PIT partition mx that i found, and nothing, every time it says, Re-Partition failed.
10. Tried with a different computer, USB cable, everything... and nothing!..
11. Also tried with the rescue korean rom, and nothing.
12. Also tried with the single file from samfirmeware and the pit file, and nothing!
Any thoughts??? I'm desperate!
Click to expand...
Click to collapse
Download a 3 file firmware from sammobile and also download mx.pit file.
Open odin.
Select pit and locate the mx.pit you have downloaded. Select repartion check box and flash it.
Then reset odin.
Click on pda and select the code file of your 3 file firmware.
Select modem and click on modem part of the 3 file firmware.
And then click on csc and select the csc file.
Make sure re partition is not selected and that the pit box is blank.
Then hit start and how it works.
Drew071
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:24 AM ----------
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
Zimbardo.ea originally posted this info on another thread. So credits to him/her for the links.
Use only the mx.pit in the pit rar.
If you manage to flash the pit but the 3 file firmware doesn't work, download speedmod kernel and flag the kernel only. Then go to cwm and then mounts and storage. Format system, data and cache. Then go back to download mode after a battery pull. And then flash the 3 file firmware again. Do not select a pit file and make sure re partition is unchecked.
This should work.
Hope it helps.
Drew071
Sent from my GT-I9300 using xda app-developers app
Off step one!
drew071 said:
Download a 3 file firmware from sammobile and also download mx.pit file.
Open odin.
Select pit and locate the mx.pit you have downloaded. Select repartion check box and flash it.
Then reset odin.
Click on pda and select the code file of your 3 file firmware.
Select modem and click on modem part of the 3 file firmware.
And then click on csc and select the csc file.
Make sure re partition is not selected and that the pit box is blank.
Then hit start and how it works.
Drew071
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:24 AM ----------
Here's the link to a 3-file firmware:
Here's the one from SamMobile for the pit-files:
Zimbardo.ea originally posted this info on another thread. So credits to him/her for the links.
Use only the mx.pit in the pit rar.
If you manage to flash the pit but the 3 file firmware doesn't work, download speedmod kernel and flag the kernel only. Then go to cwm and then mounts and storage. Format system, data and cache. Then go back to download mode after a battery pull. And then flash the 3 file firmware again. Do not select a pit file and make sure re partition is unchecked.
This should work.
Hope it helps.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help man, however when I try to flash the pit file, I got this:
"Re-Partition operation failed."
So, as you can see I'm off on step 1.
Also on download mode shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom.
So, no product name as you can see. And old TV set screen when I try to normally power on, or conecting the charger, or trying to go to recovery.
Got another trick under the sleeve? I would appreciate it... Thanks! :good:
lumogox said:
Thanks for the help man, however when I try to flash the pit file, I got this:
"Re-Partition operation failed."
So, as you can see I'm off on step 1.
Also on download mode shows:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom.
So, no product name as you can see. And old TV set screen when I try to normally power on, or conecting the charger, or trying to go to recovery.
Got another trick under the sleeve? I would appreciate it... Thanks! :good:
Click to expand...
Click to collapse
Can you access recovery?
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Can you access recovery?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No, only Download mode. Recovery shows the old tv like screen.
lumogox said:
No, only Download mode. Recovery shows the old tv like screen.
Click to expand...
Click to collapse
Have you another usb cable youcould use? I had this issue once in my s1 and it was the usb cable.
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Have you another usb cable youcould use? I had this issue once in my s1 and it was the usb cable.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
3 Different USB cables. Same thing.
you guys are not getting me. you flashed a wrong pit file, you're done
Glebun said:
you guys are not getting me. you flashed a wrong pit file, you're done
Click to expand...
Click to collapse
The are people that have Flashed pit files abs still recovered the phone. I'm pretty sure these phones are never that deaf until download mode is dead.
Would A jtag recover the phone?
Drew071
Sent from my GT-I9300 using xda app-developers app
Glebun said:
you guys are not getting me. you flashed a wrong pit file, you're done
Click to expand...
Click to collapse
It didn't do anything, Odin didn't have the time to flash the pit file, and it was already broken long before I try to re-partition the pit file through Odin.
So, no, that's not the problem.
lumogox said:
It didn't do anything, Odin didn't have the time to flash the pit file, and it was already broken long before I try to re-partition the pit file through Odin.
So, no, that's not the problem.
Click to expand...
Click to collapse
it is the problem. even if the phone was bricked, it was reversible. flashing the wrong pit file made the damage irreparable
Glebun said:
it is the problem. even if the phone was bricked, it was reversible. flashing the wrong pit file made the damage irreparable
Click to expand...
Click to collapse
Galaxy 4 next month. :laugh:
it's nice to be rich, isn't it?
drew071 said:
The are people that have Flashed pit files abs still recovered the phone. I'm pretty sure these phones are never that deaf until download mode is dead.
Would A jtag recover the phone?
Drew071
Sent from my GT-I9300 using xda app-developers app[/QUOTE
You've totally screwed your phone pit files shouldn't be flashed
stupidly will be met by sarcasm
Click to expand...
Click to collapse
Hi guys,
I need your help.I want to help a friend of mine to flash stock jb rom.
When tried to flash the first odin stucked at hidden and the second time at system after changing usb port and rebooting the computer.
I found somewhere that flashing pit file then the firm may work
Is that because he didn't do a factory reset before flashing?
He's got an s3 I9300 with orange rom 4.0.4.
Any help would be appreciated. Thanks
Styrke said:
Hi guys,
I need your help.I want to help a friend of mine to flash stock jb rom.
When tried to flash the first odin stucked at hidden and the second time at system after changing usb port and rebooting the computer.
I found somewhere that flashing pit file then the firm may work
Is that because he didn't do a factory reset before flashing?
He's got an s3 I9300 with orange rom 4.0.4.
Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Flashing a pit will usually hard brick the phone. If odin is correct version, phone is connected properly and you are flashing the right rom for your phone then the worst had already happened, nand failure.
You are missing a lot of information in your post, what does the screen say in download mode and how did you arrive at needing to flash back to stock?
boomboomer said:
Flashing a pit will usually hard brick the phone. If odin is correct version, phone is connected properly and you are flashing the right rom for your phone then the worst had already happened, nand failure.
You are missing a lot of information in your post, what does the screen say in download mode and how did you arrive at needing to flash back to stock?
Click to expand...
Click to collapse
He told me that there is the error Firmware upgrade encountered an issue. Please selcect recovery mode in Kies.
He wanted to upgrade to jb and he said to me that some system apps are missing because its from orange.
Yes im sure that it's the right firmwate its for i9300 took it from samfimware with highest changelog its for Vietnam.
And im using odinv307
Sent from my GT-I9500 using Tapatalk HD
Write out exactly what the phone screen says when in download mode.
Did you disable Kies before the flash, sounds to me like kies interrupted the flash
I can't contact him right now.Is it sure that the phone won't go back to download mode if the pit file was passed without firm ? If not is it possible to recover it with Jtag ?
@slaphead20 yes I killed it from the task manager
Sent from my GT-I9500 using Tapatalk HD
boomboomer said:
Write out exactly what the phone screen says when in download mode.
Click to expand...
Click to collapse
Here is what its mentioned
Odin mode
product name GT I9300
custon binary download Yes ( 1 counts )
current systeme samsung official
system stats custom
Now after flashing the pit file the download mode still can be accessed and when rebooting it shows samsung gt-i9300 logo
Can you tell me what can i do to not getting odin stuck while flashing ?
Sent from my GT-I9500 using Tapatalk HD
Styrke said:
Here is what its mentioned
Odin mode
product name GT I9300
custon binary download Yes ( 1 counts )
current systeme samsung official
system stats custom
Now after flashing the pit file the download mode still can be accessed and when rebooting it shows samsung gt-i9300 logo
Can you tell me what can i do to not getting odin stuck while flashing ?
Sent from my GT-I9500 using Tapatalk HD
Click to expand...
Click to collapse
At what point does it get "stuck"? what exactly does it say in Odin?
rootSU said:
At what point does it get "stuck"? what exactly does it say in Odin?
Click to expand...
Click to collapse
It doesn't say anything.It's just the flashing process does not progress.Latest time the phone was flashed it got stuck while flashing system.img
Sent from my GT-I9500 using Tapatalk HD
Doesn't sound good to me. I would have thought it was a send for repair job.
As you've already flashed a pit I think you have a hard brick, all I can suggest is try this thread:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
I will try that.Thanks all for trying to help.Appreciate it
Hi
A friends S2 suddenly stopped working. someone tried to flash something (i dont know what he did exactly)
....
when i got it, i just could enter downloadmode. also: when pluging in a usb cable it says, that a problem while flashing was encountered, and i should enter recoverymode in kies and try again.
What i tried:
- installed kies and tried a fresh stock flash. => failed. it stuck at 2% and failed after....HOURS...when phone ran out of batt
- tried with Odin (v3.07, 1.85 or 83? or both...dunno): tried with different roms, one-package, 3-part-package, with pit, without pit (repartition) => everything failed.
- also cant access via QtADB (tried it just for fun-.-)
is there something left i can try? its a I9100 (NO G version) and flawlessly enters downloadmode....im running out of ideas, but i think this poor phone is done...
...still...any ideas?
wishing you a nice day
CJ
just btw: i never had a S2....i have my GT-S5830 aka. Cooper aka Galaxy Ace. so if there are things i should be aware of at this device...pls tell me^^
Check out @Hopper8 threads for help with Odin when a flash fails.
if you mena his "a odin flash failed" thread: i tried this already....
CJCord said:
if you mena his "a odin flash failed" thread: i tried this already....
Click to expand...
Click to collapse
My thread in my signature? And you tried everything? And then tried everything all over again, on a new PC? I'm sorry but I highly doubt it. There is no easy fix, or magic trick to make it work. It requires perseverance.
Have you tried to flash siyah kernel then boot to recovery cwm? Then install a custom rom?
Hi
Im now trying since sunday....
Tried different roms, kernels, pcs, odin versions, ....always the same....
It fails when it starts to write on nand....
Sent from my GT-S5830 using xda app-developers app
NAND stuffed; service centre (motherboard replacement), or you can keep trying (have you tried a 3 part firmware ?).
i also tried a 3 part firmware. same problem/fail.