1. If you cannot get into HBOOT or recovery, go in settings, battery and turn off fast boot.
2. If you need data and voice at the same time, go settings, mobile data and change the network to CDMA/LTE.
3. If you need SmartSync disabled, there is an app in the market for that (SmartSync Disabler). If you don't know what SmartSync is, you don't need the app. LOL
I will expand this as things come up.
D
.
dsb9938 said:
1. If you cannot get into HBOOT or recovery, go in settings, battery and turn off fast boot.
2. If you need data and voice at the same time, go settings, mobile data and change the network to CDMA/LTE.
3. If you need SmartSync disabled, there is an app in the market for that (SmartSync Disabler). If you don't know what SmartSync is, you don't need the app. LOL
I will expand this as things come up.
D
.
Click to expand...
Click to collapse
Are you saying with #2 that SVDO IS POSSIBLE while only on Verizon's 3G network? (data on 3G voice on 1X-Advanced) Or do you have to do this to get SVDO while on 4G? (data on 4G voice on 3G)? I am assuming the latter...
Where's the option to change network? Can't see it on mine
Sent from my Droid DNA. 1080p never looked so sweet
BFirebird101 said:
Where's the option to change network? Can't see it on mine
Sent from my Droid DNA. 1080p never looked so sweet
Click to expand...
Click to collapse
Under "Preferred Network", is set to "Global" by default.
Sent from my HTC6435LVW using xda app-developers app
bakemcbride21 said:
Are you saying with #2 that SVDO IS POSSIBLE while only on Verizon's 3G network? (data on 3G voice on 1X-Advanced) Or do you have to do this to get SVDO while on 4G? (data on 4G voice on 3G)? I am assuming the latter...
Click to expand...
Click to collapse
I'm hoping so, although I heard a rep said it wasn't possible.. can someone with a DNA confirm whether it works with these settings?
From what I have been told, it only works on 4G, but I don't have any 3G areas around me to test it.
D
.
dsb9938 said:
From what I have been told, it only works on 4G, but I don't have any 3G areas around me to test it.
D
.
Click to expand...
Click to collapse
Wow, I just realized you're in Edison lol. That's 20 minutes away from me - I'm in Holmdel and yeah, there aren't really any 3g areas around here.. just the occasional (very random) 3g for s few seconds then back to 4g..
dsb9938 said:
3. If you need SmartSync disabled, there is an app in the market for that (SmartSync Disabler).
.
Click to expand...
Click to collapse
I have searched for this but it is no where in the store? Any idea why?
xShin said:
Wow, I just realized you're in Edison lol. That's 20 minutes away from me - I'm in Holmdel and yeah, there aren't really any 3g areas around here.. just the occasional (very random) 3g for s few seconds then back to 4g..
Click to expand...
Click to collapse
Live in Sussex...work in Newark...yeah no 3G anywhere for you guys...I'm still bathed in up here..lol
The demo unit at the Rockaway Mall is live...I'll stop by and change that setting and see if it does. It DID NOT work when I tried it on Wednesday but I am assuming it was set to global mode. It probably won't work but I'm passing by there today anyway.
dsb9938 said:
From what I have been told, it only works on 4G, but I don't have any 3G areas around me to test it.
D
.
Click to expand...
Click to collapse
Switching to CDMA/LTE won't enable SVDO.
The MDM9615 in its current configuration doesn't support SVDO and this can be seen in another phone (iPhone 5).
If you want to look at the technical reasons (for iPhone 5 as an example), HTC probably did it to keep the phone so slim and less of a brick.
http://www.anandtech.com/show/6295/...ous-voice-and-lte-or-evdo-svlte-svdo-support-
adrynalyne said:
Switching to CDMA/LTE won't enable SVDO.
The MDM9615 in its current configuration doesn't support SVDO and this can be seen in another phone (iPhone 5).
If you want to look at the technical reasons (for iPhone 5 as an example), HTC probably did it to keep the phone so slim and less of a brick.
http://www.anandtech.com/show/6295/...ous-voice-and-lte-or-evdo-svlte-svdo-support-
Click to expand...
Click to collapse
Will need to look at the FCC docs to be 100% sure on the capability of SVDO and this device.
It's not about the MDM9615 chip config, its about the lack of transmissions and such that limited the iP5, as svdo requires multiple paths.
I'd be surprised if its not supported here on this device for VZ to be honest... The reason iP5 lacks it was merely bc they wanted to cover more LTE bands with one device as opposed to many devices...
This being on VZ I'd think it'd be implemented....less they made other decisions for some reason...need look over FCC doc to see.
In the end looks like a solid device you guys have regardless!
Sent from my EVO using Tapatalk 2
sgt. slaughter said:
Will need to look at the FCC docs to be 100% sure on the capability of SVDO and this device.
It's not about the MDM9615 chip config, its about the lack of transmissions and such that limited the iP5, as svdo requires multiple paths.
I'd be surprised if its not supported here on this device for VZ to be honest... The reason iP5 lacks it was merely bc they wanted to cover more LTE bands with one device as opposed to many devices...
This being on VZ I'd think it'd be implemented....less they made other decisions for some reason...need look over FCC doc to see.
In the end looks like a solid device you guys have regardless!
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
That was what I was referring to regarding config and the 9615 and using different paths, which, according to the Anandtech article, adds thickness and weight. I figured the paths were directly related to the 9615.
My bad.
dsb9938 said:
1. If you cannot get into HBOOT or recovery, go in settings, battery and turn off fast boot.
.
Click to expand...
Click to collapse
If you don't want to turn off fast boot. You can hold power button and restart. When you see the screen off(no backlight) then hold volume down button. You'll get it.
xShin said:
Wow, I just realized you're in Edison lol. That's 20 minutes away from me - I'm in Holmdel and yeah, there aren't really any 3g areas around here.. just the occasional (very random) 3g for s few seconds then back to 4g..
Click to expand...
Click to collapse
I grew up in Holmdel parents still live there. My girlfriend and I bought a house in Matawan. Small world and I bet I know you!
You can find 3g on van brackel road on the hills.
Love this phone
adrynalyne said:
That was what I was referring to regarding config and the 9615 and using different paths, which, according to the Anandtech article, adds thickness and weight. I figured the paths were directly related to the 9615.
My bad.
Click to expand...
Click to collapse
No worries.
Yeah it would add weight and such if apple wanted to keep the current antenna design and add the path ontop of it, is the way I look at it.
If I get time ill look around and see on the DNA bc ill be stunned if it doesn't support it.... That is less HTC went to a diff antennae design somewhat themselves too...which is possible.
Sent from my EVO using Tapatalk 2
how do you boot into recovery? whats the button combo?
Hold down volume down while pressing the power button
Dri94 said:
how do you boot into recovery? whats the button combo?
Click to expand...
Click to collapse
The program WiFi Tether for Root Users works for those that are rooted with these settings:
Change the Device-Profile to HTC Rezound (LTE/CDMA/GSM)
Change Setup-Method to Netd-Ndc (master)
Add encryption, change passphrase, and change SSID as needed.
docnok63 said:
The program WiFi Tether for Root Users works for those that are rooted with these settings:
Change the Device-Profile to HTC Rezound (LTE/CDMA/GSM)
Change Setup-Method to Netd-Ndc (master)
Add encryption, change passphrase, and change SSID as needed.
Click to expand...
Click to collapse
It works fine as generic with the routing fix too.
D
.
sgt. slaughter said:
No worries.
Yeah it would add weight and such if apple wanted to keep the current antenna design and add the path ontop of it, is the way I look at it.
If I get time ill look around and see on the DNA bc ill be stunned if it doesn't support it.... That is less HTC went to a diff antennae design somewhat themselves too...which is possible.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Some tests I ran came up with these results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Showing that I was on 3G:
Related
Can i turn off LTE? Or do i have to wait for a user-friendly root method?
Jamesyboy said:
Can i turn off LTE? Or do i have to wait for a user-friendly root method?
Click to expand...
Click to collapse
pretty much unfortunately.
Also, how do i turn off cellular data? I know this is blasphemy, but im coming from and iphone and i want to be able to force wifi when needed, and ensure there is no cell data usage when i want.
What if we have already rooted our phone, how do i turn off lte now?
Sorry this is my first android phone.
mclaughlinar said:
What if we have already rooted our phone, how do i turn off lte now?
Sorry this is my first android phone.
Click to expand...
Click to collapse
How'd you root? Which method?
Jamesyboy said:
How'd you root? Which method?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1504218
Jamesyboy said:
Also, how do i turn off cellular data? I know this is blasphemy, but im coming from and iphone and i want to be able to force wifi when needed, and ensure there is no cell data usage when i want.
Click to expand...
Click to collapse
Hi just put this on your Home on your phone. Works so well Very tiny widget turns on and off the Data.
https://market.android.com/details?id=com.farproc.data.enabler#?t=W251bGwsMSwyLDUwMSwiY29tLmZhcnByb2MuZGF0YS5lbmFibGVyIl0.
Jamesyboy said:
Also, how do i turn off cellular data? I know this is blasphemy, but im coming from and iphone and i want to be able to force wifi when needed, and ensure there is no cell data usage when i want.
Click to expand...
Click to collapse
I know its cumbersome, but until we have roms with custom toggles in the notification bar pulldown, go to settings > wireless and networks > mobile networks > uncheck data enabled.
I don't have a note, but this has been the same on both my infuse and captivate. Should be the same or similar for the note. Yeah its cumbersome, but it works.
Also, if you stay connected to the same wifi, it shouldn't use data anyways, but I suppose this way makes sure.
Sent from my SGH-I997 using xda premium
Blown, welchert, and various. Thanks so much for making an android noob feel at home! While the LTE issue isnt resolved, a major worry of mine is!
No problem. And I'm not exactly sure, but there may be some code that you can dial to force 3g data only. I know for my infuse there are codes to force edge, but I have no clue about lte. Anybody with any knowledge of this should definitely chime in, because once I get my note ill definitely be interested in turning of lte as well.
Sent from my SGH-I997 using xda premium
If you arent in an LTE supported area you have no worries. ATTs network isnt like verizons where the phone will constantly be looking for LTE. If you are in an LTE area and just dont want to use it you will have to alter APN settings to one that only uses H+. You should be able to use the same settings from an H+ only phone.
Just go in settings, wireless network, mobile network,network mode... And you should see this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I717M
big samm said:
Just go in settings, wireless network, mobile network,network mode... And you should see this
View attachment 910539
Sent from my SGH-I717M
Click to expand...
Click to collapse
Ahhh nice to see they integrated the option
Jamesyboy said:
Also, how do i turn off cellular data? I know this is blasphemy, but im coming from and iphone and i want to be able to force wifi when needed, and ensure there is no cell data usage when i want.
Click to expand...
Click to collapse
I just enter airplane mode and then turn back on the wifi if I want to make I am only using wifi connection.
Sent from my SAMSUNG-SGH-I717 using xda premium
big samm said:
Just go in settings, wireless network, mobile network,network mode... And you should see this
View attachment 910539
Sent from my SGH-I717M
Click to expand...
Click to collapse
unfortunately that option isn't in the at&t version... i live in an lte area, but for battery reasons i may want to turn it off some of the time, but not something as difficult as changing apn settings every time.
If there's no easy option i'll just deal with it.
yea um like the user mc said its not there and no good reason why they didnt put it there...
Maybe because your devices are locked to Att.
Mine is form bell here in Canada but its unlocked!
Sent from my SGH-I717M
drksilenc said:
yea um like the user mc said its not there and no good reason why they didnt put it there...
Click to expand...
Click to collapse
does the widge work? (from link above)
As expected, stock at&t ROM doesn't have that simple option to choose which of those 3 data options you want. I'm not surprised considering stock Skyrocket also doesn't give you this option.
imitenotbecrazy said:
If you arent in an LTE supported area you have no worries. ATTs network isnt like verizons where the phone will constantly be looking for LTE. If you are in an LTE area and just dont want to use it you will have to alter APN settings to one that only uses H+. You should be able to use the same settings from an H+ only phone.
Click to expand...
Click to collapse
Verizon doesn't search for LTE constantly if you aren't in an LTE area.
Love 4G LTE speeds but just hate to see your battery drop like a rock? I'm sure i do
Well i have a theoretical solution to this:
Im going to be talking about different data modes so it would be best to read this:
Specifically page 5(but its an interesting article)
http://www.extremetech.com/mobile/110711-what-is-lte/
ExtremeTech said:
The reason why LTE devices right now eat batteries for breakfast is because the network operators are forcing these devices into active dual-mode operation.
For Verizon Wireless, this means that all of their LTE devices connect to both CDMA2000 and LTE simultaneously and stay connected to both. This means that you are eating twice the amount of battery for every minute you are connected than you would if you were connected only to CDMA2000 or LTE. Additionally, when you make calls on Verizon Wireless LTE phones, the CDMA2000 radio sucks down more power because you are talking. Sending and receiving text messages causes pulses of CDMA2000 activity, which cuts your battery life more. Arguably, constantly changing radio states could be worse for battery life than a switch into one mode for a period of time and switching back, so text messages may actually kill the batteries faster.
Click to expand...
Click to collapse
Basically what Verizon is doing when 4G is on is forcing their phones to be running 1xRTT, CDMA2000(3G) and LTE at the same time.
Now the question is why would anyone do this? the reason why is so that when you leave the range of a 4G tower you are greeted immediately with 3G(no need to turn it on)
So some of you that live in areas where you constantly use 4G are saying "screw 3G i always have 4G" and that brings us to the point of the thread:
Dial *#*#4636#*#* on your dialer and go to Phone information:
Scroll down to "preferred network type.
It should say something like "CDMA + LTE/EvDO auto." this just means it will switch between 4G and 3G automatically.
GB:
Now look at the bottom and you will see "LTE mode (w/voice)"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sense 4
Choose LTE, CDMA
ICS:
choose LTE, CDMA
Dont confuse this with VoLTE(voice over 4G) as it isnt
This just means that the 3G connection will not be running along with the 4G connection and should save battery.
Select the one corresponding to your firmware and Congrats, now your phone can only connect to 1x and LTE.
Everything will works as it normally would but if you leave the range of a 4G tower it will not automatically switch to 3G.
Thanks:
ClockerXP for the article
rockingondrums for a pic
Evocm7 for a pic
Note: I have not had the chance to fully try this out but it is pretty straightforward.
I do not see this option. Running Clean ROM developer edition (latest version), with just a system UI modification for a more AOSP theme. That mod is somewhere in the thread for the ROM.
My options:
CDMA only
EvDo only
GSM/WCDMA, CDMA, and EvDo (PRL)
CDMA + LTE/EvDo auto
GSM/WCDMA/LTE auto
CDMA/EvDo/GSM/WCDMA/Lte auto
LTE only
LTE, CDMA
:/
Tried setting it to LTE only (hoping voice was just unmentioned) but it didn't work.
rockingondrums said:
I do not see this option. Running Clean ROM developer edition (latest version), with just a system UI modification for a more AOSP theme. That mod is somewhere in the thread for the ROM.
My options:
CDMA only
EvDo only
GSM/WCDMA, CDMA, and EvDo (PRL)
CDMA + LTE/EvDo auto
GSM/WCDMA/LTE auto
CDMA/EvDo/GSM/WCDMA/Lte auto
LTE only
LTE, CDMA
:/
Tried setting it to LTE only (hoping voice was just unmentioned) but it didn't work.
Click to expand...
Click to collapse
forget about you ICS people. You guys definitely have more options. I would go with LTE, CDMA
Can you confirm this and grab me a screenshot of this menu so i can add it to the OP
This screenshot? I set it to lte/cdma
Sent from my ADR6425LVW using Tapatalk 2
LTE, CDMA is the same thing I think.
Because "CDMA only" is no 3G.
con247 said:
LTE, CDMA is the same thing I think.
Because "CDMA only" is no 3G.
Click to expand...
Click to collapse
Lets hope because if it isnt this whole thread is a big flop because there aren't a lot of GB holdouts like me
poison, i've been wodnering WHERE i could set to 4g only to try to force it on my phone, thanks dude!
after coming back to GB, i see w/ voice...but ICS def doesnt. uh oh..might have to label this GB only
Po1soNNN said:
forget about you ICS people. You guys definitely have more options. I would go with LTE, CDMA
Can you confirm this and grab me a screenshot of this menu so i can add it to the OP
Click to expand...
Click to collapse
I'm guessing the "LTE, CDMA" mode is a true hand off operation, rather than keeping both on? Or else there'd be no point, right?
And here's your screenshot. Menu was too long, so I used Paint to splice em:
con247 said:
LTE, CDMA is the same thing I think.
Because "CDMA only" is no 3G.
Click to expand...
Click to collapse
yes this is true
con247 said:
LTE, CDMA is the same thing I think.
Because "CDMA only" is no 3G.
Click to expand...
Click to collapse
CDMA only being lack of 3G... is this on a GB or ICS ROM?
ok guys i edited everything. look at the pictures. Now just gotta resize the pics
Po1soNNN said:
ok guys i edited everything. look at the pictures. Now just gotta resize the pics
Click to expand...
Click to collapse
I already resized my pic for you you're welcome lol jk
Going to try it out and see what happens. But again, am I correct in assuming the LTE, CDMA differs from SOP in that it's a true handoff between the two radios, rather than having both on and powered at the same time?
rockingondrums said:
I already resized my pic for you you're welcome lol jk
Going to try it out and see what happens. But again, am I correct in assuming the LTE, CDMA differs from SOP in that it's a true handoff between the two radios, rather than having both on and powered at the same time?
Click to expand...
Click to collapse
I think you might be confused. CDMA is used for calls and texts and LTE is used for Data and MMS. In this mode the 3G radio isnt even on.
Have tests been run to see if this actually saves any battery?
Po1soNNN said:
I think you might be confused. CDMA is used for calls and texts and LTE is used for Data and MMS. In this mode the 3G radio isnt even on.
Click to expand...
Click to collapse
Yes I am, I always thought VZW's 3G ran on their CDMA network. I guess because I thought ExDo Rev A was part of the CDMA thing. Mobile technology is too convoluted. Too many bands and such haha.
1x - CDMA - voice/text messaging
3g - EvDO - Data
4G - LTE - Data
That's what Verizon uses. LTE, CDMA should be what we want. I'm testing this out and will report back later!
Yeah I'll report back later as well. I think I might turn off Juice Defender so as not to skew my observations.
Im gonna give this a whirl too. I'll report back tomorrow on how well it helped.
jscarano said:
Im gonna give this a whirl too. I'll report back tomorrow on how well it helped.
Click to expand...
Click to collapse
I would do a comparison for with or without this mode set but i only have LTE from 7am to 3pm when i am at school located in the capital city.
jscarano said:
Im gonna give this a whirl too. I'll report back tomorrow on how well it helped.
Click to expand...
Click to collapse
+1
This is a difficult topic to search. anything with "3g, issues, connectivity, drop" brings up pretty much every thread possible lol.
I vaguely remember reading about people having problems with 3G not picking up/connecting a while back but havent heard much since.
It has been a constant issue with me as of late. I'll drop wifi when I leave work or my house and 3g picks up maybe....MAYBE 20% of the time(no exaggeration). ##data# to restore, updating profile, updating prl. Even tried a factory reset. No dice.
Sprint data isn't the best. That just may be the issue.
Dogie52 said:
Sprint data isn't the best. That just may be the issue.
Click to expand...
Click to collapse
Thanks for the quick reply.
I dont think its sprint in this case. my 3VO had no problems. My GF's 4s has zero problems. Neighbors Nexus has no problems either.
munsterrr said:
Thanks for the quick reply.
I dont think its sprint in this case. my 3VO had no problems. My GF's 4s has zero problems. Neighbors Nexus has no problems either.
Click to expand...
Click to collapse
Read about the various chipsets in the cells available, that will help understand why you see some throughout differences with other cells.
Sent from my htc_jewel using xda app-developers app
If you searched for an answer you would know that they are upgrading to lte so therefore lte phones wont work well until rollout is complete hence reason why older phones work better
Sent from my HTC Evo 4G using xda premium
munsterrr said:
It has been a constant issue with me as of late. I'll drop wifi when I leave work or my house and 3g picks up maybe....MAYBE 20% of the time(no exaggeration). ##data# to restore, updating profile, updating prl. Even tried a factory reset. No dice.
Click to expand...
Click to collapse
Mine does the same thing. I have to reboot it about 3 times a day. It really stinks. The data will work after a reboot. It seems like the mobile connection gets stuck with switching from off to on.
Im going to the Sprint store to figure out if its my phone or not.
bootny said:
If you searched for an answer you would know that they are upgrading to lte so therefore lte phones wont work well until rollout is complete hence reason why older phones work better
Sent from my HTC Evo 4G using xda premium
Click to expand...
Click to collapse
Thanks for the heads up buddy :good:
I would understand if the Network Vision changes would affect everyone in an area. Not a specific phone. Like I said up above, a Nexus sitting right next to my phone all day yesterday never dropped 3g.
waterbound said:
Read about the various chipsets in the cells available, that will help understand why you see some throughout differences with other cells.
Sent from my htc_jewel using xda app-developers app
Click to expand...
Click to collapse
Makes sense. If that is the case though. Arent S3 users out of luck too with this?
Don't think it's the chipset necessarily. It will happen to me when I'm at 4-5 bars , then just drops, and gets locked out. Normally if I flip the network on and off a few times it will turn back on, but sometimes a reboot is needed.
Maybe I'm wrong, but doesn't seem like it is the network or the chipset. No?
Sent from my EVO using xda app-developers app
I was having 3g issues. Come to find out its the lte radio. Turned off my lte radio by network mode and made it cdma only. No problems since.
munsterrr said:
It has been a constant issue with me as of late. I'll drop wifi when I leave work or my house and 3g picks up maybe....MAYBE 20% of the time(no exaggeration). ##data# to restore, updating profile, updating prl. Even tried a factory reset. No dice.
Click to expand...
Click to collapse
gregfink said:
Mine does the same thing. I have to reboot it about 3 times a day. It really stinks. The data will work after a reboot. It seems like the mobile connection gets stuck with switching from off to on.
Im going to the Sprint store to figure out if its my phone or not.
Click to expand...
Click to collapse
I have this problem sometimes when I turn off mobile data and turn on wifi at home then leave and turn off wifi and turn on mobile data but it won't turn on. Turning airplane mode on then off to reset the radios fixes it for me.
Thanks for the applicable replies everyone.
I just wasn't sure if I had missed a "fix" before I picked this up. The silence on the subject had me wondering. Guess we can only hope for an update/patch in the near future. Not a big issue but an annoyance.
Mine's been acting up the last 3 days or so. I used to run it all the time in LTE/CDMA mode. And that was fine for a month.
But being in one of the first LTE markets, that doesnt work anymore. It flashes turning on.. very quickly disconnected, then turning on.. over and over. If I put it in CDMA only, 3g pops right on and it's no problem.
One of my coworkers in another part of town is still on lte/cdma with no problems. I went to the sprint store to verify it was just them working on things and they said it was, and the employee had the same issue with her phone.
They said by all means, if it still doesnt work come the 15th bring it back in but at this point.. Just a waiting game i believe. Also, since my coworkers is still working that should mean I'm going to see LTE, and he probably won't right off the bat.
I also had connection issues when using the "LTE/CDMA" setting. Switched to "CDMA only" and it connects reliably, now.
As others have said, I imagine it's because it's trying to connect to towers that are being tested and can't. Switching to "CDMA only" prevents it from trying to connect to these towers.
Funny. It is backwards for me lol.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been having a ton of problems with this too. Constantly seems to be dropping even though I have full bars; does it on WiFi too. I'm switching over to CDMA only and will see if that helps me out. Hopefully we'll be seeing LTE here in St. Louis before to much longer.
i don't have any trouble with the wifi dropping out, but right on par with what everyone else is seeing on the 3g. except that the only way i can get mine to come back is to reboot.
dangle79 said:
i don't have any trouble with the wifi dropping out, but right on par with what everyone else is seeing on the 3g. except that the only way i can get mine to come back is to reboot.
Click to expand...
Click to collapse
This is exactly what happens to me. Wifi, no problems. 3g - reboot about 2-3 times a day to get it back. Mobile network just gets stuck on "turning on"
At least I know its other people now, so I don't try to return the phone and then get even more pissed when I get another one doing the same thing.
gregfink said:
This is exactly what happens to me. Wifi, no problems. 3g - reboot about 2-3 times a day to get it back. Mobile network just gets stuck on "turning on"
At least I know its other people now, so I don't try to return the phone and then get even more pissed when I get another one doing the same thing.
Click to expand...
Click to collapse
that's where i'm at. i've read elsewhere that the OG EVO had a similar/same issue when it first came out that was soon corrected by an update. buddy with a Bionic on VZW said he has a similar problem on it when he first got it, then an update fixed.
i'm new to HTC so i don't know how anxious to get for an OTA. samsung was absolutely horrible with my Transform. Got Froyo like 4 or 5 months after promised
in the meantime i might try this to disable smart-sync which actually links back to here. but that's how i came across it
http://www.pocketables.com/2012/06/how-to-turn-off-smart-sync-on-your-htc-sense-4-0-device.html
Try turning off WiFi when it's not in use. It worked wonders for me.
I've been calling every day, every day they tell me no data outages in my area. Have another Sprint user in my building getting same speeds. I've resorted to installing a 3G roaming PRL because they simple won't do anything about it. Before 9/4 the data was fine, slow at times, but I could at least stream Pandora, etc...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry that's so hard to see... but it's less than 100kbps download on almost ALL of them... It's slower than 56k modem most of the time. I have 3G symbol with 4/6 bars and never had bad data like this in the location before 9/4/2012.
Well you could hold your breath or move to city with lte... Jk but yeah I feel ya on the slow data.
Sent from my Genesis that does what Nintendon't
Ever heard of "Sprint Vision"? Maybe its happening in your area now.
via EVO.
This is usually what happens when you contact Sprint for issues:
A Speedtest screenshot would've done this justice .vs the off centered text.
Sent from my EVO using xda premium
Blackcircle said:
Ever heard of "Sprint Vision"? Maybe its happening in your area now.
via EVO.
Click to expand...
Click to collapse
Is it common that when the roll out vision data speeds go to crap before they get better? It's funny as it only seems to be in this 2 mile range around my work. By my house, I'm getting 3G speeds above 1400kbps (which I've never got before). I've told Sprint that, told them that I've updated my profile, basically told them everything and that I just want them to tell an engineer despite what their system shows, that their is slow data in this address range... Still nothing.
Guess I'll just get my contract terminated for roaming...
Genjinaro said:
A Speedtest screenshot would've done this justice .vs the off centered text.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
A speedtest is ONE run. This is a speedtest export of MANY runs.
fldash said:
A speedtest is ONE run. This is a speedtest export of MANY runs.
Click to expand...
Click to collapse
In the Speedtest Application, just hit the "RESULTS" tab below & it'll give you every run, (date + time, download, upload & ping)
I'm well aware of that, but I wanted more results than that displays, so I exported to CSV. I've fixed the first post so it was better formatting.
fldash said:
Is it common that when the roll out vision data speeds go to crap before they get better? It's funny as it only seems to be in this 2 mile range around my work. By my house, I'm getting 3G speeds above 1400kbps (which I've never got before). I've told Sprint that, told them that I've updated my profile, basically told them everything and that I just want them to tell an engineer despite what their system shows, that their is slow data in this address range... Still nothing.
Guess I'll just get my contract terminated for roaming...
Click to expand...
Click to collapse
I have read that speeds can be affected during the switch over. In my personal experience, it also depends on geographic location. I live in Lake Worth FL, I get 2mb down and almost 900kb up from my house on 3g. Now, I work in North Miami Beach, I'm lucky if I get 100kb down and 3 kb up down here, even on 5 bars. This is even before the LTE rollout. Just because you have a good signal, doesn't mean your data will be fast. I think some areas may be over subscribed, they just don't have the bandwidth available for all their devices in some areas. Hopefully this will get better as they rollout LTE in my area.
If they are upgrading to vision it would be more likely that your speeds would fluctuate rather then stay at a constant low. They may be repairing towers in that area and pushing the load onto remaining towers. That essentially cripples available bandwidth. Had to put up with a similar issue for almost 3 straight months. They should tell you if there are any repairs or improvements being done. Have you tried having your call escalated?
Call customer retentions. Quit messing around with the customer support people who have no power
Sent from my EVO using Tapatalk 2
Rxpert said:
Call customer retentions. Quit messing around with the customer support people who have no power
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
+1 on this. That was going to be my recommendation as well.
CR will probably credit you which looks like you are entitled with the crappy service. And yes, data gets worse during NV upgrades, especially when they are working on the backhaul to the towers. It gets worse before it gets better then you will know its almost time to light up LTE. in short, nothing much more you can do other than leave Sprint but I'm thinking it will be regretted in the end.
Sent from my EVO using xda app-developers app
When you say respond what exactly are you wanting them to do?
Sent from my EVO using xda premium
Quis89 said:
When you say respond what exactly are you wanting them to do?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Uh, fix it. No one should have data this slow consistently. Every single second. I understand periods of slowness, but this is absurd.
And, it looks like they fixed it last night... Back to normal 400-600kbps.
I've had data that slow at home for close to 15 months, all I got was an Airave (sounds like a motto on a t-shirt).
Sent from my Evo 4G LTE using Tapatalk 2
fldash said:
Uh, fix it. No one should have data this slow consistently. Every single second. I understand periods of slowness, but this is absurd.
And, it looks like they fixed it last night... Back to normal 400-600kbps.
Click to expand...
Click to collapse
lol there are places that have had data that slow for 2+ years now with no fixes from sprint.
Get an Airave!, I just moved to a remote area of Hawaii, no data and 1bar at best. Two days after calling for an airave I recieved it. Now 5bars and full 3g. Best part is its free!
Sent from my Holographic Touch Android.
As many of you already know, Note 3 is one of a few Verizon smartphones that has a Category 4 LTE modem, capable of delivering 150Mbps download speeds. Verizon's been rolling out new LTE layer on AWS or Band 4, and in many cities like NYC, LA, SF, Chicago, Atlanta, Detroit, Miami, to name a few users have been seeing speeds just under 100Mbps, but only using Category 3 devices like GS4, iPhone 5s, etc which are hardware limited at 100Mbps.
Since this is a Note 3 forum, it would be great to have this thread for reports on Verizon's Band 4 LTE, and especially Speedtest.net results which should be north of 100Mbps!
Similar thread exists in GS4 forums: http://forum.xda-developers.com/showthread.php?t=2502716
And a much more in depth one over at HoFo: http://www.howardforums.com/showthr...ent-and-Verizon-sites-with-Remote-Radio-Units
This article also talked about Verizon's 2x20Mhz AWS LTE: http://gigaom.com/2013/10/14/watch-out-att-verizons-new-lte-network-monster-stirs-in-nyc/
On Galaxy phones it should be easy to access ServiceMode via dial codes, which will allow you to monitor the Band you're connected to, and even force the certain frequency. I don't own Note 3, but afaik Verizon usually tries to block out these codes, although there used to be an app in Play Store that would dial the codes for you (Samsung ServiceMode or Sammy codes)
*#0011# General Debug screen
*#2263# Allows you to force any frequency on your phone
*#27663368378# Main screen
There are a few other codes, please post your findings!
That's pretty neat. Thanks for the info!
I wonder what this'll mean for Verizon customers currently grandfathered into the unlimited 4G LTE data plans and if there's any plans of discontinuing that service.
I'll have to check this out once I head back to the city.
Sent from my SM-N900V
keennay said:
That's pretty neat. Thanks for the info!
I wonder what this'll mean for Verizon customers currently grandfathered into the unlimited 4G LTE data plans and if there's any plans of discontinuing that service.
I'll have to check this out once I head back to the city.
Sent from my SM-N900V
Click to expand...
Click to collapse
Unlimited users still get to access this LTE channel with capable device like Note 3.
This is what users are seeing on GS4, but remember GS4 is capable of only 100Mbps on the downlink, so that's the limiting factor. Note 3 can push 150Mbps!
I have read conflicting reports, pretty sure its still disabled on our firmware. One guy said he tried in his AWS enabled area and it wasnt recieving it, still same speed as MI9 and others thought they might since they were seeing speeds of like 60 down.
I'm not in one of those areas and lucky to see 30 down on a good day, so I can't tell you definitively either way.
NeoMagus said:
I have read conflicting reports, pretty sure its still disabled on our firmware. One guy said he tried in his AWS enabled area and it wasnt recieving it, still same speed as MI9 and others thought they might since they were seeing speeds of like 60 down.
I'm not in one of those areas and lucky to see 30 down on a good day, so I can't tell you definitively either way.
Click to expand...
Click to collapse
Have you tried the Play Store apps to get into ServiceMode?
There are a few of them, I use this: https://play.google.com/store/apps/details?id=com.amoopa.sammysmode&hl=en
There seems to be a similar free one: https://play.google.com/store/apps/details?id=com.kabasoft.util.servicemodeshortcut&hl=en
*#0011# General Debug screen
*#2263# Allows you to force any frequency on your phone
*#197328640# Main screen
Out of those 3 codes only *#0011# General Debug screen worked for me. Hmm are there any other additional steps I have to take to be able to access those other codes?
milan03 said:
Have you tried the Play Store apps to get into ServiceMode?
Click to expand...
Click to collapse
No, as I said I dont live in a AWS area.
Here was the post though
http://forum.xda-developers.com/showpost.php?p=47190780&postcount=108
zepfloyd said:
I've confirmed it twice that it's not in the update, as we have both Tmo and VZ LTE in Band 4 here. VZ speeds stayed the same post update and my TMO Sim will only go to H+ vs my VZ-GS4 which goes up to LTE on the TMO SIM.
Click to expand...
Click to collapse
lisek99 said:
*#0011# General Debug screen
*#2263# Allows you to force any frequency on your phone
*#197328640# Main screen
Out of those 3 codes only *#0011# General Debug screen worked for me. Hmm are there any other additional steps I have to take to be able to access those other codes?
Click to expand...
Click to collapse
Post screenshot of *#0011# and I'll explain how to analyze it.
milan03 said:
Post screenshot of *#0011# and I'll explain how to analyze it.
Click to expand...
Click to collapse
lisek99 said:
Click to expand...
Click to collapse
Ok, so you're looking at the first line where it says LTE Band. Band 13 is the original LTE layer in 700Mhz spectrum.
PLMN: 311-480 is the country/network code, unique to Verizon Wireless.
Bandwidth is the amount of spectrum they're using. Band 13 is 10Mhz nationwide, capable of 73.6Mbps peak speeds. Their Band 4 is in many markets 20Mhz capable of 150Mbps peak speeds!
RSRP is "reference signal receive power" -44dBm being amazing, and -140dBm you're about to drop connection.
SNR is "signal to noise ratio" the higher the better. 30dB is perfect.
RSRQ is "reference signal receive quality" -3dBm being amazing and -19dBm terrible.
PA state displays the new envelope tracking (ET) feature only Note 3 has, it saves battery and should improve upload, etc....
You really should be watching the first line and try to spot "BAND 4" and the third line showing you the BW (bandwidth). Should be between 10Mhz and 20Mhz depending on the market. Please state your market when you post screenshots, it will really help me figure out which areas are getting this massive capacity!
Hope this helps!
So do you know why I can't access those codes?
*#2263# Allows you to force any frequency on your phone
*#197328640# Main screen
I really wanna try to enable that band 4 option
lisek99 said:
So do you know why I can't access those codes?
*#2263# Allows you to force any frequency on your phone
*#197328640# Main screen
I really wanna try to enable that band 4 option
Click to expand...
Click to collapse
Ever since HTC Thunderbolt which had a similar ServiceMenu, Verizon got paranoid about giving users too much low level control, and started requesting OEMs to block these codes from the final shipping ROMs. T-Mobile variant for instance has all of the ServiceMode pages enabled. So the ServiceMode.apk is still there, but it isn't listening dialer any more. You can try those apps I've posted above, they should get you to the service mode.
There is also *#27663368378# Which is the actual root of the app. Also, certain ROMs enable this. It's really enabling it in the build.prop. ServiceMode is baked into the TW framework, so ROM must be TW based.
milan03 said:
Ever since HTC Thunderbolt which had a similar ServiceMenu, Verizon got paranoid about giving users too much low level control, and started requesting OEMs to block these codes from the final shipping ROMs. T-Mobile variant for instance has all of the ServiceMode pages enabled. So the ServiceMode.apk is still there, but it isn't listening dialer any more. You can try those apps I've posted above, they should get you to the service mode.
There is also *#27663368378# Which is the actual root of the app. Also, certain ROMs enable this. It's really enabling it in the build.prop. ServiceMode is baked into the TW framework, so ROM must be TW based.
Click to expand...
Click to collapse
After using *#27663368378# I navigated thru the menu and I got to this screen but after enabling it and rebooting the phone my band was still at 13
None if these codes are doing anything for me on beans rom. Type em in and all it does is dial.
Sent from my SM-N900V using xda app-developers app
Can anyone else with the Verizon Developer Edition of the Note 3 utilize any of these apps? Both say they're unsupported on my device.
Sent from my SM-N900V
Im trying to do that 2766 long string that ends with the pound nothings happening am I supposed to hit something after that dialer just tries to make a call no menu comes up
** just tried the service mode shortcut app 2nd link doesnt work says not supported when you click it in the app
Well I just tried to buy the app from the 1st link and it says my Note 3 isnt supported and wont let me download it. Howd you get into the menu? The apk for servicemode is showing in Titanium and not frozen dont know why it wont open
lisek99 said:
After using *#27663368378# I navigated thru the menu and I got to this screen but after enabling it and rebooting the phone my band was still at 13
Click to expand...
Click to collapse
Ah finally! After the reboot, do you have Band 4 ENABLED? Did it stick? Which ROM are you on and what metro area are you in?
Not all areas have Band 4 enabled. NYC, LA, SF, Chicago, Atlanta, Miami, but also Lexington, KY, etc... Try testing it in the busiest parts of your city, since Verizon is deploying there first, to alleviate the congestion.
Hi Milan, nice seeing you here, read a lot of your posts over at HoFo and S4GRU.
YES!!! AWS live in Philadelphia!!! I have kept up with the HoFo thread and haven't heard of any sighting in Philly yet.
What I did was first enabled B4 like above and then went into UE setting, settings, protocol, NAS, network control, band selection, and under LTE preference chose B4 to force it. Interesting enough there is no B13 option in there.
I have screenshots of service mode, was speed test, and b13 speed test. Too bad signal on AWS sucks so I can't really use it. I guess this is because Verizon had the lowest number of towers here. My speed test is quite poor but compared to B13 in Philly, otherwise known as the slowest network in Philly other than Verizon CDMA, pretty much anything is improvement.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900V using Tapatalk
changt34x said:
Hi Milan, nice seeing you here, read a lot of your posts over at HoFo and S4GRU.
YES!!! AWS live in Philadelphia!!! I have kept up with the HoFo thread and haven't heard of any sighting in Philly yet.
What I did was first enabled B4 like above and then went into UE setting, settings, protocol, NAS, network control, band selection, and under LTE preference chose B4 to force it. Interesting enough there is no B13 option in there.
I have screenshots of service mode, was speed test, and b13 speed test. Too bad signal on AWS sucks so I can't really use it. I guess this is because Verizon had the lowest number of towers here. My speed test is quite poor but compared to B13 in Philly, otherwise known as the slowest network in Philly other than Verizon CDMA, pretty much anything is improvement.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Hey this is awesome news!!! Congrats! They seem to be running another 10Mhz FDD LTE in the AWS. EARFCN value of 2100 corresponds to B block AWS license they've acquired from SpectrumCo cable companies! So you should be having another 73.6Mbps channel which should alleviate the congestion!
Have you tried testing in a busy areas of Philly during the Off-Peak hours just to see if the capacity is there? Don't forget to put Network Selection back to "Automatic", otherwise you won't be receiving any calls, just LTE Data
Thank you for posting a short guide on how to properly enable B4 on Note 3!
Again how are you guys even getting into the service mode? Both of those apps and none of the codes seem to work what am I doing wrong here?