Related
This is a stock rooted EU Shooter 1.20.401.2 ROM (odex) to use as a base for everyone. This was extracted directly from the RUU.
The only MODS made to this were that it has been ROOTED and ZIPALIGNED.
DOWNLOAD LINKS
http://www.multiupload.com/P6KDFDYD5K
Thanks for it. May I ask where to find the RUU? Thanks in advance
Sent from my HTC EVO 3D X515m using Tapatalk
Flashmaniac said:
Thanks for it. May I ask where to find the RUU? Thanks in advance
Sent from my HTC EVO 3D X515m using Tapatalk
Click to expand...
Click to collapse
you can find it here
http://www.filefactory.com/file/cc7...00_10.13.9020.08_2M_release_203403_signed.exe
Hello
Is it possible to install a custom recovery after that?
moluxdeluxe said:
Hello
Is it possible to install a custom recovery after that?
Click to expand...
Click to collapse
With S-ON, no you can't.
But is this a way to root your evo3d? Or am i mistaken?
no this is pre-rooted rom. If you had a custom Recovery you could flash it. There is no way for the most of us yet, wait a little bit revolutionary Team is working on it already.
how'd you know that they are working?
i didnt see you joining the irc
runeazn said:
how'd you know that they are working?
i didnt see you joining the irc
Click to expand...
Click to collapse
Because I flashed the first s-off hboot together with ief this morning
ask him about sami, I gave them everything they need
^so you were the guy that couldn't reply within 5 seconds
otherwise mine could've been rooted at midnight XD
long story shot,
we were testing and got a good result, we knowed what we needed.
contacted you, and i asked replied, humans dont reply within 5 seconds<IEF
lawl
sleeped, morning ah and then rooted.
i got my rogers evo 3d.
omg its so drool.
anything I can do to help let me know.
-cope
t3project said:
This is a stock rooted EU Shooter 1.20.401.2 ROM (odex) to use as a base for everyone. This was extracted directly from the RUU.
The only MODS made to this were that it has been ROOTED and ZIPALIGNED.
DOWNLOAD LINKS
http://www.multiupload.com/P6KDFDYD5K
Click to expand...
Click to collapse
Hi,
Would you be able to do the same for RUU_Shooter_U_hTC_Asia_WWE_1.22.707.2_Radio_10.55.9020.00_10.13.9020.29_M_release_207422_signed.
I have flashed the Europe ROM by Virtuous Shooter and have Wifi Error. Need to revert back to Asia ROM deperately to get back the original ROM.
I cannot use the original Asia RUU to revert back as halfway thru it will give me error on device. I suspect this is due to using HTCdev bootloader unlock method
Got a question, if I got a euro EVO 3d then if i root and flash a different radio will it pick up different signals to better support it here in the USA or am I just stuck on edge??. If not is there any software adjustments that can be made to make it pick up at least 3g??
cmloo said:
Hi,
Would you be able to do the same for RUU_Shooter_U_hTC_Asia_WWE_1.22.707.2_Radio_10.55.9020.00_10.13.9020.29_M_release_207422_signed.
I have flashed the Europe ROM by Virtuous Shooter and have Wifi Error. Need to revert back to Asia ROM deperately to get back the original ROM.
I cannot use the original Asia RUU to revert back as halfway thru it will give me error on device. I suspect this is due to using HTCdev bootloader unlock method
Click to expand...
Click to collapse
yes, or you could just use this: http://forum.xda-developers.com/showthread.php?t=1237276
poloboogie said:
Got a question, if I got a euro EVO 3d then if i root and flash a different radio will it pick up different signals to better support it here in the USA or am I just stuck on edge??. If not is there any software adjustments that can be made to make it pick up at least 3g??
Click to expand...
Click to collapse
i suppose you could try flashing a rogers radio but i wouldnt recommend it. you may be able to make some tweaks in qpst or cdma workshop
TQ so much!!! Downloading now. Hopefully it works
Edit: YES!!! It Works
My phone is s-off but flash with based cmw not works error is status 0 solution?
Same here,have this recovery installed:
http://goo-inside.me/shooteru/clockworkmod
I tried now the Virtuous Shooter v.1.0.2 ROM with the same recovery
which I mentioned one post above.There are no problems!
Maybe something wrong with the "updater-script" at the ROM from this
thread.
Thanks Flashmaniac
why i dont can install this ROM?
im on the same Base, using GSM Evo and Clockwork.
I keeping getting a bootloop on all ics roms and I tried a kernal that someone recommend but it kills my 3d and i get random reboots . Is there any way to fix this problem and install the ROM with everything working. I'm on hb 1.50 . S- on . Or is there a way to downgrade to hb 1.40 but i don't have a Linux . What's the easiest way ?
Sent from my PG86100 using XDA
I also get the same results!
You can always try 4EXT Recovery with smartflash on. It works for both S-On and S-Off
ccr515 said:
I keeping getting a bootloop on all ics roms and I tried a kernal that someone recommend but it kills my 3d and i get random reboots . Is there any way to fix this problem and install the ROM with everything working. I'm on hb 1.50 . S- on . Or is there a way to downgrade to hb 1.40 but i don't have a Linux . What's the easiest way ?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
try a superwipe. that fixed mine. Look in the dev forum for it (i think you can find it in the mean rom thread)
You could also downgrade using the instructions in the development thread. Ir doesnt require Linux, it includes a downloadable bootable CD. ITA damn near an automated process minus the brick part. And +1 for 4ext recovery it has features built just for S-on.
My other shooter is an FNAR .308
I already tired a super wipe and my netboot doesn't have a cd drive .
Sent from my PG86100 using XDA
Try using any of Chad.Goodman's ICS Kernel after flashing an ICS ROM
1) DO THIS AT YOUR OWN RISK
2) USE THE RIGHT KERNEL
*credit to chad.goodman* http://forum.xda-developers.com/showthread.php?t=1623646
That the kernal that I already use . It breaks my 3d and i get random reboots
Sent from my PG86100 using XDA
ccr515 said:
That the kernal that I already use . It breaks my 3d and i get random reboots
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Well what kernel did you use, you could be flashing the wrong one. The other option is to downgrade HBOOT ,, no linux required
http://forum.xda-developers.com/showthread.php?t=1563342
---------- Post added at 08:10 PM ---------- Previous post was at 07:49 PM ----------
I got my ICS ROM to work by flashing RLS1
I doubt downgrading HBOOT will help, he's getting it to work with Chad's kernel. I'm exhibiting the exact same issue with bootloops with the stock kernel(in my case I used the shooter ice kernel to get it to boot) and I'm S-OFF/GSM so I'm pretty sure the issue isn't HBOOT related.
Same here
I have the same issue. I use 4ext with smartflash for recovery. I'm able to flash any GB rom I want, but when I try an ICS rom with a stock kernel I get the boot looping. Is there any other way to make this work? I don't want to dig into the brick/unbrick business if I can help it. I have also tried using Flash Img GUI and fastboot/adb to flash the kernel with the exact same results. Any information on this would help, but a solution would be fantastic!
._. I see what's going on... It's GSM users trying to flash CDMA kernels once again.
Sent from my PG86100 using XDA
What I did was use the new s off for 1.50 and once I got that done I was able to flash any ics Rom I want . Look for it in the development section.
Sent from my PG86100 using XDA
ccr515 said:
What I did was use the new s off for 1.50 and once I got that done I was able to flash any ics Rom I want . Look for it in the development section.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
+1 to this. The stock Ics kernel does not do well with 1.5 s-on. Since you cannot downgrade to 1.4 s-off, you should try the new 1.5 s-off method. Otherwise you have to use a custom kernel which is not 100% yet.
Sent from my PG86100
coal686 said:
+1 to this. The stock Ics kernel does not do well with 1.5 s-on. Since you cannot downgrade to 1.4 s-off, you should try the new 1.5 s-off method. Otherwise you have to use a custom kernel which is not 100% yet.
Sent from my PG86100
Click to expand...
Click to collapse
Seems like no stock ics kernels like 1.4 hboot period with or without s-off. None would work for me until i updated my hboot to 1.5 and had s-off.
smokin1337 said:
Seems like no stock ics kernels like 1.4 hboot period with or without s-off. None would work for me until i updated my hboot to 1.5 and had s-off.
Click to expand...
Click to collapse
I've been running 1.4 s-off since the downgrade method came available and have never had an issue with any ics ROMs.
Sent from my PG86100
Can someone post a link to the new S-Off method for hboot 1.5?
MakeMeFibonacci said:
Can someone post a link to the new S-Off method for hboot 1.5?
Click to expand...
Click to collapse
Here it is: http://forum.xda-developers.com/showthread.php?t=1585846
I recommend you read all about it first as you have to connect two contact points on your phone using insulated wire, which sounds kind of dangerous.
coal686 said:
Here it is: http://forum.xda-developers.com/showthread.php?t=1585846
I recommend you read all about it first as you have to connect two contact points on your phone using insulated wire, which sounds kind of dangerous.
Click to expand...
Click to collapse
The hboot downgrade seems a lot less scary for sure. In all honesty it was ez and took me less than 30 mins but to each his own
Hey guys, this thread is about flashing new firmware and s-on. I know at the moment it's not possible to flash new firmware while you are s-on.
I read a lot of people can not run properly a ICS-rom cause they are unable to flash new firmware cause they are s-on.
Will this ever change for them, or will they always be stuck with the older firmware and as a effect of that stuck with Gb. OTA updates are also not working for them cause most of the custom roms have disabled this function.
For guys who are s-on and want to try a ICS-rom, i flashed the mwakious rom using 4EXT recovery, worked great for me no problems whatsoever(im still using old firmware:10.59.9020.00_10.15.9020.06)
Anybody an idea, maybe we can hold a little brainstorm session.
Tom3D said:
Anybody an idea, maybe we can hold a little brainstorm session.
Click to expand...
Click to collapse
U could but u will get new hboot from china so wait for official ics update should not be long
Sent from my HTC EVO 3D X515m using xda premium
anryl said:
U could but u will get new hboot from china so wait for official ics update should not be long
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Ok, and that is also possible for people who are already running a custom ICS rom at the moment?
cause if the people already run a custom rom, and the dev. of that rom made OTA impossible then that people with s-on will never be able to update there firmware.
Tom3D said:
Ok, and that is also possible for people who are already running a custom ICS rom at the moment?
cause if the people already run a custom rom, and the dev. of that rom made OTA impossible then that people with s-on will never be able to update there firmware.
Click to expand...
Click to collapse
U wil have to install latest ruu for the ota to work and update ur hboot and radio then u can again flash custom rom's
Sent from my HTC EVO 3D X515m using xda premium
I have the Evo V 1.57 H-Boot S-Off that's rooted and with 4Ext recovery. My question is, what ROMS are compatible with this setup. I know CM10 isn't which is fairly disappointing. I wanna flash something different so I can WIFI Tether. Thank you.
Sent from my HTCEVOV4G using xda premium
CM10 does work with the Evo V
If you are refering to MMS not working you can find a fix Here. And it seems your on hboot 1.57 if you had read the CM10 OP you noticed you need to downgrade your hboot to 1.50 or lower. (eng boot recommended)
Im also sure any CDMA Rom will work with your device you might just have to change the APN
Okay. I understand that and thank you for the help. But my other question was are there any compatible ROMs with my H-Boot?
YourWorstPoison said:
Okay. I understand that and thank you for the help. But my other question was are there any compatible ROMs with my H-Boot?
Click to expand...
Click to collapse
Most ICS Sense based ROM's should work fine with hboot 1.57. There are many in the Evo 3D development forum on XDA and some specifically designed for the Evo V in that device forum on androidforums.com.
You will need to downgrade your hboot if you want to run GB and/or AOSP based ROM's and there are instructions to do that here. My favorite hboot is JBear 1.50.5050 since it is the newest version that boots most ROM's.
ramjet73
I'll check them out. Everytime I tried running an ASOP Rom, it just wanted to bootloop. Drives me crazy. Thank you. Appreciate it.
Sent from my HTCEVOV4G using xda premium
I have been looking for a JB ROM for my HTC EVO V 4G for some time now, but I can't seem to find one that supports what I have. I am running hboot 1.57 with S-ON (I once tried getting S-OFF and bricked my phone for nearly a day-spent 7 hours trying to fix it-never doing S-OFF again!). I'm currently running the epic NegaLite Blue ROM. Any suggestions?
AFAIK, you must get s off first.
Your best bet for jb look for s on, is to install a launcher, or flash a senseless rom
Sent from my Evo V 4G using xda app-developers app
Without s-off you can't flash JB rom. You have to do s-off first. That's because you need new kernel, you can't change your kernel with s-on.
UndercoVg said:
Without s-off you can't flash JB rom. You have to do s-off first. That's because you need new kernel, you can't change your kernel with s-on.
Click to expand...
Click to collapse
I've changed my kernel multiple times with that one kernel flasher app for the EVO
Yes, it's possible with this app or maybe fastboot (im not sure), but impossible in your recovery.
duscdragon said:
I have been looking for a JB ROM for my HTC EVO V 4G for some time now, but I can't seem to find one that supports what I have. I am running hboot 1.57 with S-ON (I once tried getting S-OFF and bricked my phone for nearly a day-spent 7 hours trying to fix it-never doing S-OFF again!). I'm currently running the epic NegaLite Blue ROM. Any suggestions?
Click to expand...
Click to collapse
You need to downgrade your h-boot to 1.4x.xx. I order to downgrade you need to be s-off
Sent from Mwakious powered EVO 3D
you don't have to go that low, I'm running dirty unicorns (really good rom that I recommend you flash) on hboot 1.50
Sent from my PG86100 using Tapatalk 4 Beta
johnnyboi1994 said:
you don't have to go that low, I'm running dirty unicorns (really good rom that I recommend you flash) on hboot 1.50
Sent from my PG86100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
But he must downgrade anyway. So the best thing to do is flash 1.49.0007 h-boot because it's known for making no problems whatsoever
Sent from Mwakious powered EVO 3D
donkeykong1 said:
But he must downgrade anyway. So the best thing to do is flash 1.49.0007 h-boot because it's known for making no problems whatsoever
Sent from Mwakious powered EVO 3D
Click to expand...
Click to collapse
What is a better way of getting S-OFF Revolutinoary or JBear?
duscdragon said:
What is a better way of getting S-OFF Revolutinoary or JBear?
Click to expand...
Click to collapse
For me it's Revolutionary just because wires and small electronic components just don't go together in my world. But that's just me, a lot of people say that Jbear is easy and simple
Sent from Mwakious powered EVO 3D
like one of the other users said, you should go "S-OFF" first
At that point, you are free to try any hboot, rom, radios, etc.
As for me, ive tried Negolite, SmoothCriminal, PacMAN, and now Wild For The Night.
The Jelly Bean Roms (PacMAN and Wild For The Night) have by far been the ones i like best. I could not get MMS working on PacMAN so i went to WFTN and i got every feature of the phone working perfect (except for 3D which doesnt work on any JB rom at this time)
The rom really depends on what fits ur lifestyle and ur taste. i like the smooth look of a JB rom and the features of the camera.
donkeykong1 said:
For me it's Revolutionary just because wires and small electronic components just don't go together in my world. But that's just me, a lot of people say that Jbear is easy and simple
Sent from Mwakious powered EVO 3D
Click to expand...
Click to collapse
\
I have hboot 1.57 and the beta key for Revolutionary is only for 1.4 and 1.3. Can I still get S-OFF with those?
Will controlbear work with mwakious ? They say it will not but I am not sure.